A3P400-FGG256 - 400K Gate FPGA, 231 MHz | Microchip
MPN: A3P400-FGG256 ✓ Hoạt độngA3P400-FGG256 Tóm tắt
A field-programmable gate array is a programmable-logic semiconductor whose configuration defines digital circuits after manufacture. An FPGA belongs to the broader programmable-logic device hierarchy, alongside complex programmable logic devices, while its parallel configurable logic, routing fabric, and programmable I/O allow one device to implement control, datapath, interface, and protocol functions. The ProASIC3 family combines nonvolatile Flash configuration with a single-chip FPGA solution and supports reprogrammability.
The A3P400-FGG256 provides 5K logic elements according to its distributor product listing, 178 I/O, and a 1.5 V supply specification. Its 400,000-equivalent-gate capacity is suitable for consolidating multiple fixed-function logic blocks into one programmable component. The 231 MHz operating specification gives designers a defined performance target for synchronous control logic, peripheral bridges, and embedded data-processing functions.
ProASIC3 devices use four I/O banks with dedicated bank supplies, allowing compatible voltage standards to be assigned within each bank. This bank-oriented architecture is important when planning mixed-voltage interfaces because I/O assignments must respect each supply domain. Device configuration is stored in Flash, allowing the same hardware design to be updated for field upgrades, protocol revisions, or logic corrections without replacing the FPGA.
Typical applications include industrial control, communications, instrumentation, embedded test equipment, and compact embedded systems where parallel logic density and generous I/O are valuable. The device is particularly suitable when firmware-driven product variations or field updates justify using programmable logic instead of a large collection of fixed-function devices.
PCB planning should account for the fine-pitch 256-ball package, power-supply distribution across multiple rails, and high-speed routing into the BGA array. Designers should preserve the manufacturer's recommended power, decoupling, and layout practices and verify every I/O-bank voltage assignment against the selected interface standards before releasing the PCB.
This page combines the A3P400 family specifications, package and programming characteristics, sourcing guidance, alternative-device analysis, and practical PCB considerations to support faster component selection and design planning.
Bộ thay thế dễ dàng lắp đặt cho A3P400-FGG256 — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
A3P400-FGG256I
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
A3P400-FGG256YI
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
A3P400-FGG256 Tỷ lệ tối đa & tính chất điện
| Product Type | ProASIC3 field-programmable gate array (FPGA) |
| Equivalent Gate Count | 400,000 gates |
| Logic Elements | 5K LEs |
| Maximum Frequency | 231 MHz |
| I/O Count | 178 I/O |
| Core Supply Voltage | 1.5 V |
| Programmable Logic Blocks | 9,216 LABs |
| Hộp | 256-LBGA / 256-pin FBGA |
| Package Type | S-PBGA-B256 |
| Ball Pitch | 1.00 mm |
| Kiểu lắp đặt | Surface mount |
| Shipping Format | Tray |
| Configuration Memory | Flash-based |
| I/O Bank Count | 4 banks |
| Programmability | Field-programmable and reprogrammable |
Hướng dẫn cấu hình chân A3P400-FGG256 s-pbga-b256
Cấu hình chân cho A3P400-FGG256 (s-pbga-b256 gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho A3P400-FGG256.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
A3P400-FGG256 phù hợp cho 6 Áp dụngs: Industrial Machine Control, Communications Interface Consolidation, Test and Measurement Instrumentation, Embedded Data Acquisition, Programmable Security and Access Control, Aerospace Ground Support Equipment.
Industrial Machine Control
The A3P400-FGG256 fits industrial machine-control logic that needs extensive external connections, deterministic programmable logic, and field-update capability. Its 400,000 equivalent gates and 5K logic elements can consolidate sequencing, sensor interfaces, actuator controls, and supervisory logic, while 178 user I/O reduce the need for external I/O expanders. The 231 MHz maximum frequency supports clocked control and data-processing blocks. Its four I/O banks allow compatible voltage standards to be grouped, making it useful for systems combining machine I/O with communications peripherals. Flash-based configuration also permits controlled firmware revisions without replacing the device.
Được đề xuất
Communications Interface Consolidation
The A3P400-FGG256 is suitable for communications equipment requiring parallel datapaths, protocol conversion, and a high pin count in a compact package. The 400,000-equivalent-gate device provides capacity for framing, buffering, clock-domain crossing, test logic, and communications control functions, while 178 I/O supports multiple interfaces. Its four I/O banks help organize compatible voltage standards, and the 231 MHz maximum frequency accommodates demanding synchronous logic. Flash-based configuration allows deployed equipment to receive protocol or functional updates through its configuration path, reducing the need for separate programmable devices.
Được đề xuất
Test and Measurement Instrumentation
The A3P400-FGG256 can consolidate instrument control, acquisition sequencing, pattern generation, and status logic within one programmable device. Its 5K logic elements and 400,000-equivalent-gate capacity provide ample parallel logic for coordinating sensors, ADC channels, triggers, and communications, while 178 I/O offer broad external connectivity. The four-bank I/O structure permits compatible voltage groups, which is useful in instruments combining logic-level control with other interface standards. At a 231 MHz maximum device frequency, the FPGA can implement clocked measurement and digital-processing functions subject to routing and timing closure.
Được đề xuất
Embedded Data Acquisition
The A3P400-FGG256 fits embedded acquisition systems that must gather parallel sensor data and perform digital conditioning without relying on a fixed logic configuration. Its 178 I/O provide substantial sensor, control, and communications connectivity, while 400,000 equivalent gates support sampling sequencing, filtering, calibration tables, and data framing. The four I/O banks allow compatible voltage standards to be assigned within each bank. The 231 MHz maximum frequency can serve time-critical datapaths, and Flash-based reprogramming permits calibration profiles or functional revisions to be updated after deployment while preserving the same hardware platform.
Được đề xuất
Programmable Security and Access Control
The A3P400-FGG256 can implement programmable authentication, authorization, protocol, and event-logic functions where field configuration is valuable. Its 400,000-equivalent-gate capacity supports parallel matching engines, state machines, encryption-related control logic, and peripheral interfaces, while 178 user I/O accommodates external sensors, memories, and communication links. The four-bank arrangement permits compatible logic voltage domains, and the 231 MHz maximum frequency supports synchronous cryptographic and protocol-control blocks after routing. Flash-based configuration allows security policy or interface revisions to be deployed as controlled device updates.
Được đề xuất
Aerospace Ground Support Equipment
The A3P400-FGG256 is suitable for programmable ground-support and test systems that need extensive I/O, adaptable logic, and configuration updates. The 256-ball package provides 178 user I/O for equipment interfaces, while 400,000 equivalent gates can combine sequencing, telemetry handling, data capture, and communications control. Four I/O banks support compatible voltage grouping, and the 231 MHz maximum frequency supports synchronous ground-processing functions. Because the exact suffix determines environmental and qualification attributes, use the YI ordering variant only when its official grade and qualification satisfy the deployment requirement.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho A3P400-FGG256 — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | A3P400-FGG256I | A3P400-FGG256YI |
|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 256-LBGA / 256-pin FBGA | 256-LBGA / 256-pin FBGA | 256-terminal S-PBGA-B256 |
| FPGA Family | ProASIC3 | A3P400 / ProASIC3 | A3P400 / ProASIC3 |
Bảo phân biệt quan trọng
- High logic density combined with a high pin count (vsA3P400-FGG256I)
- Documented 231 MHz operating ceiling (vsA3P400-FGG256YI)
- Four-bank I/O architecture (vsA3P400-FGG256I)
Ghi chú thiết kế
Reserve a continuous 1.00 mm-pitch escape strategy for the 256-ball FBGA and follow the manufacturer package drawing when assigning every ball. Place BGA decoupling and supply connections close to their associated balls, keep sensitive configuration and clock routes away from noisy switching nodes, and maintain uninterrupted return paths. The package contains power, ground, configuration, and user-I/O balls in addition to the 178 user I/O, so a complete 256-ball escape is required.
Design the 1.5 V core rail and all four I/O-bank supplies independently, with adequate local decoupling and low-impedance distribution to every related power ball. Assign I/O standards only when the voltage is compatible with the selected bank supply. Follow the manufacturer power-up, decoupling, and sequencing requirements, and verify transient behavior across the full 231 MHz device frequency and worst-case I/O loading.
Do not treat A3P400-FGG256, A3P400-FGG256I, and A3P400-FGG256YI as automatically interchangeable because the suffix may alter speed grade, temperature range, or qualification. Check the official ordering guide, confirm device revision, and recompile or reanalyze timing-sensitive logic. Also avoid assuming that the 400,000-equivalent-gate figure predicts logic utilization; actual capacity depends on LAB, routing, memory, clock, and I/O allocation.
Use the manufacturer's clock and I/O guidance to control skew, loading, and edge quality, especially when the design approaches the 231 MHz device ceiling. Place clock inputs and configuration interfaces away from high-switching nets, match external interfaces to the selected I/O-bank voltage, and apply signal-integrity analysis to long routes, connectors, and board transitions. Run post-route static timing analysis with actual external loading rather than relying on the nominal device frequency alone.
Thông tin tuân thủ
The family marketing information identifies ProASIC3 Flash FPGAs, but exact RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status for A3P400-FGG256 was not identified. Verify the current manufacturer product and material declarations for the ordered suffix.