A42MX09-PG132B - MX FPGA 14K Gates 132-Pin CPGA | Microchip
部品番号: A42MX09-PG132B ✓ 生産中| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $68.5 | $68.50 |
| 10 | $62.1 | $621.00 |
| 100 | $55.4 | $5,540.00 |
| 500 | $49.8 | $24,900.00 |
| 1,000 | $44.9 | $44,900.00 |
A42MX09-PG132B 概要
An FPGA is a semiconductor device containing a fabric of programmable logic blocks and programmable interconnects that the designer configures after manufacturing. Within the programmable logic hierarchy, the MX family sits among antifuse-based, one-time-programmable FPGAs, which differ from SRAM-based FPGAs by retaining their configuration permanently without an external boot device. This makes MX devices a reliable, single-chip ASIC alternative for high-volume, cost-sensitive systems.
Key features of the A42MX09 include an efficient 5.0 V-tolerant architecture, mixed 3.3V/5V operation, and dual module types: C-modules for combinational logic and S-modules with embedded flip-flops. The 0.45 um antifuse process delivers low cost, low power, and high immunity to configuration upset compared with SRAM FPGA alternatives.
Technically, the 42MX routing structure uses segmented and direct interconnect with dedicated quadrant clock networks for low-skew clock distribution. The device operates at internal performance levels cited around 129 MHz to 215 MHz depending on module type and speed grade, and the 132-pin CPGA package provides robust, through-hole or socketed mounting suited to industrial and defense environments.
Typical applications include legacy PLD integration, glueless bus interfacing, industrial control, and defense/aerospace systems that benefit from one-time programming, small footprint, and long lifecycle availability.
When designing with the A42MX09-PG132B, remember that antifuse programming is permanent: verify the design in Libero/Designer software and on a development socket before committing to programmed devices.
This page adds value beyond the datasheet by synthesizing distributor pricing, drop-in alternative options within the MX family, and practical sourcing guidance for this mature, high-reliability device, with pricing as of 2026-08-30.
ドロップイン代替品: A42MX09-PG132B — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: A42MX09-PG132B （同一形状・フットプリント） — 相違点: Family, Mounting Type, Package, Process Technology, System Gates.
クイック比較ツール — 並列比較する代替部品を選択:
A42MX09-PG132C
✅ ドロップイン✓ 在庫あり
$600.66 / 個
データシートを見る →A42MX09-PG132M
✅ ドロップイン✓ 在庫あり
$2058.49 / 個
データシートを見る →A42MX09-PG132B 最大定格＆電気的特性
| Family | MX (42MX) |
| System Gates | 14000 gates |
| Logic Cells | 336 cells |
| Number of I/O | 95 |
| パッケージ | 132-pin CPGA (PG132) |
| 電源電圧 | 3.3 V / 5 V |
| Core Architecture | 5.0 V antifuse, one-time programmable |
| Process Technology | 0.45 um |
| Maximum Frequency | 129 MHz / 215 MHz (C-module / S-module, per datasheet family data) |
| Programming Type | Antifuse (OTP) |
| 実装タイプ | Through-hole / socketed PGA, not surface mount |
| Speed Grade | B (per MPN suffix) |
| Module Types | C-modules and S-modules (combinational and sequential) |
| Configuration Retention | Non-volatile (antifuse, no external boot device) |
A42MX09-PG132B 132-pin cpga (pg132) ピン配置ガイド
A42MX09-PG132B (132-pin cpga (pg132) パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: A42MX09-PG132B.
詳細は データシート をご参照ください。
主な用途
A42MX09-PG132B の用途: 6 件s: Legacy PLD Integration, Industrial Control Systems, Defense and Aerospace Logic, Bus Interface and Glue Logic, Single-Chip ASIC Prototyping, Test and Measurement Equipment.
Legacy PLD Integration
Microchip explicitly positions the MX family as an ideal platform for integrating legacy PLDs into a single, low-cost device. The A42MX09-PG132B offers 14,000 system gates and 95 user I/O with a 5.0 V-tolerant architecture, allowing multiple 22V10-class PLDs and discrete glue logic to be consolidated onto one chip. Because the antifuse fabric is one-time programmable and non-volatile, the consolidated design needs no configuration PROM, removing a failure point and a BOM line item. The 132-pin CPGA package also fits legacy through-hole and socketed board designs common on older platforms, so consolidation often proceeds without a full PCB respin, protecting qualification investments.
おすすめ
Industrial Control Systems
Industrial controllers benefit from the A42MX09-PG132B's combination of 5V-tolerant I/O, non-volatile antifuse configuration, and 95 user I/O for sensor, actuator, and bus interfacing. In factory environments with electrical noise and brownout conditions, the one-time-programmable fabric does not lose configuration during power interruptions, unlike SRAM FPGAs that must reload from external memory. Performance levels around 129 MHz to 215 MHz by module type are ample for state machines, counters, and interface bridging. The ceramic PGA package withstands higher temperature cycling and handling stress than plastic packages, supporting long service intervals on machinery that remains in the field for decades.
おすすめ
Defense and Aerospace Logic
Antifuse FPGAs are a traditional choice in defense and aerospace platforms because the configuration is physically permanent and immune to configuration-upset mechanisms that affect SRAM cells. The A42MX09-PG132B's ceramic 132-pin CPGA package and M-grade screening variants (such as A42MX09-PG132M) align with high-reliability procurement practices, while the 5.0 V architecture matches legacy mil-spec 5V bus logic. With 14K system gates and 336 cells, the device implements interface control, timing, and voting logic without software-based configuration load, simplifying startup behavior and BIT sequencing in systems where deterministic boot is mandatory.
おすすめ
Bus Interface and Glue Logic
The A42MX09-PG132B is well suited to glueless bus interfacing: 95 I/O with 5V tolerance connect directly to TTL and 5V CMOS buses, and the S-modules provide embedded flip-flops for synchronous bus handshake logic. Typical bridges include microprocessor-to-peripheral address decoding, wait-state generation, and parallel bus conversions. With internal performance of roughly 129 MHz to 215 MHz by module type, timing budgets for 25 MHz to 66 MHz legacy bus clocks are met comfortably. The one-time-programmable configuration removes configuration-time latency at power-up, an advantage in systems where bus master devices expect slave logic to be ready within milliseconds of reset release.
おすすめ
Single-Chip ASIC Prototyping
Microchip markets MX devices as a reliable, single-chip ASIC alternative, making the A42MX09-PG132B a practical prototyping and low-to-mid-volume production vehicle for gate-array-class designs. At 14,000 system gates with 336 cells and a 0.45 um antifuse process, the device supports moderate-scale RTL designs at low unit cost without mask charges. Designers verify logic in Libero/Designer software, then program engineering devices in ceramic packages that can be socketed for fast design iteration across programmed parts. Since programming is permanent, pinout and timing sign-off before programming production lots is essential, but the resulting devices behave identically to hard-coded ASICs in the field.
おすすめ
Test and Measurement Equipment
Bench and rack instrumentation built on 5V-era architectures can retain or extend their digital timing and control logic with the A42MX09-PG132B. The 95 I/O, 5V-tolerant interface, and deterministic one-time-programmable startup make it dependable for trigger distribution, counter/timer sequencing, and front-panel interfacing. Internal performance around 129 MHz to 215 MHz covers common 100 MHz-class timing nodes. Because the MX family has a long lifecycle and the ceramic CPGA package suits socketed, serviceable instruments, repair depots can stock programmed spares confidently, knowing the configuration cannot corrupt and board-level replacement is a swap-in operation without firmware loading.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: A42MX09-PG132B — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | A42MX09-PG132C | A42MX09-PG132M |
|---|---|---|---|
| Package | 132-pin CPGA (PG132) | 132-pin CPGA (PG132) - same | 132-pin CPGA (PG132) - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology |
| System Gates | 14000 gates | 14000 gates | 14000 gates |
| User I/O | 95 | 95 | 95 |
| Programming Type | Antifuse (OTP) | Antifuse (OTP) | Antifuse (OTP) |
| Supply Voltage | 3.3 V / 5 V | 3.3 V / 5 V | 3.3 V / 5 V |
| Grade / Screening | B grade | C grade | M grade (high-reliability screening) |
主な差別化要因
- High-reliability M-grade screening available in same footprint （vs A42MX09-PG132M)
- Non-volatile antifuse configuration vs SRAM FPGAs （vs SRAM-based FPGAs (e.g., modern families))
- 5.0 V-tolerant I/O architecture （vs Modern low-voltage FPGAs)
設計ノート
The A42MX09 uses antifuse one-time-programmable technology: a programming error is unrecoverable. Complete timing closure and simulation in Microchip Libero/Designer software, and program engineering devices first when the design is socketed. Do not program production devices until the bitstream has been validated on at least one physical unit. Budget spare devices (typically 10-15%) in production builds to cover programming yield losses, since there is no erase-and-retry path as with SRAM FPGAs.
The 132-pin CPGA is a through-hole ceramic pin grid array. Use a low-insertion-force socket for development so programmed devices can be exchanged, but solder the device directly or use a high-reliability socket in field hardware, because socket contacts add series inductance and are a long-term reliability risk under vibration. Provide solid 3.3V/5V plane separation and place 0.1 uF decoupling ceramics at the four package corners plus one per supply quadrant.
The MX architecture is specified for a 5.0 V-tolerant fabric with 3.3V/5V mixed operation per the 42MX family data. Verify which supply rails your board provides and confirm I/O bank voltage assignments before pinout lock in Designer software, because assigning 3.3V banks to 5V-driven nets can stress devices only on non-MX families, while MX tolerance must still be confirmed against the family datasheet electrical tables for your speed and grade variant.
コンプライアンス情報
Ceramic CPGA packages in this mature MX family may use lead-bearing solder seal per historical military-grade manufacturing; RoHS status must be confirmed with Microchip for the specific grade suffix before export-controlled or RoHS-mandated builds.
