A42MX16-1PQG160 - 24K Gate 5V MX FPGA, 160-PQFP | Microchip
部品番号: A42MX16-1PQG160 ✓ 生産中| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $42.5 | $42.50 |
| 10 | $39.2 | $392.00 |
| 100 | $35.8 | $3,580.00 |
| 500 | $32.1 | $16,050.00 |
| 1,000 | $29.4 | $29,400.00 |
A42MX16-1PQG160 概要
An FPGA (Field-Programmable Gate Array) is a semiconductor device containing a fabric of configurable logic blocks and programmable interconnects that the designer wires together post-manufacture, sitting in the programmable-logic hierarchy between CPLDs and full ASICs. The MX family is distinctive for its antifuse-based, non-volatile fabric and efficient 5.0V architecture, making it a reliable single-chip ASIC alternative for integrating legacy PLD designs into one low-cost, high-volume device.
Key features include the 5.0V-tolerant architecture that directly interfaces with legacy 5V bus systems without level shifters, antifuse program-once technology that is inherently secure and resistant to configuration readback, and commercial temperature range operation (0C to +70C, indicated by the absence of the I industrial suffix). The PQFP-160 surface-mount package supports standard reflow assembly.
Architecturally, the MX fabric combines logic modules with embedded routing channels optimized for high fan-in functions, suiting glue logic consolidation, state machines, bus interfacing, and control-path implementations. Design entry and programming use the Microchip (Microsemi) Libero SoC design suite.
Typical applications include legacy 5V industrial control boards, telecommunications line cards, mil-aero legacy redesigns, and high-volume consumer/industrial products where a one-time-programmable, tamper-resistant fabric is preferred over SRAM FPGAs.
Design consideration: because MX antifuse devices are one-time programmable, fully verify the design in simulation and, if possible, on a higher-density MX device before committing the production die. Pricing referenced is as of 2026-08-30; verify current stock as this mature family is often sourced through distribution allocation.
ドロップイン代替品: A42MX16-1PQG160 — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: A42MX16-1PQG160 （同一形状・フットプリント） — 相違点: Package, RoHS Status, Family, System Gates, Maximum Clock Frequency.
クイック比較ツール — 並列比較する代替部品を選択:
A42MX16-1PQG160I
✅ ドロップイン✓ 在庫あり
価格はお問い合わせください
データシートを見る →A42MX16-2PQG160
✅ ドロップイン✓ 在庫あり
$298 / 個
データシートを見る →A42MX16-3PQG160
✅ ドロップイン✓ 在庫あり
$45.1 / 個
データシートを見る →A42MX16-2PQG160I
✅ ドロップイン✓ 在庫あり
$1 / 個
データシートを見る →A42MX09-1PQG160I
✅ ドロップイン✓ 在庫あり
$29.4 / 個
データシートを見る →A42MX09-1PQG160
✅ ドロップイン✓ 在庫あり
$20.6 / 個
データシートを見る →A42MX16-1PQG160 最大定格＆電気的特性
| Family | MX (42MX) |
| System Gates | 24000 |
| Logic Cells | 1232 |
| Configurable Logic Blocks (CLBs) | 608 |
| User I/O | 125 |
| 電源電圧 | 5.0 V |
| Speed Grade | -1 (standard) |
| 最大クロック周波数 | 94 MHz |
| Programming Technology | Antifuse (one-time programmable) |
| 動作温度 | 0C to +70C (commercial) |
| パッケージ | 160-BQFP / PQFP-160 |
| Terminal Pitch | 0.655 mm |
| 実装タイプ | Surface Mount |
| Lead Free | Yes (G suffix, per distributor listings) |
| RoHS ステータス | Compliant |
| Design Software | Libero SoC (Microchip/Microsemi) |
A42MX16-1PQG160 ピン構成
| ピン 1 | IO — User I/O (full pin map per DS2316 package table) |
| ピン [DATA_NEEDED: dedicated VDD pin numbers] | VDD — 5.0V core/IO supply |
| ピン [DATA_NEEDED: dedicated GND pin numbers] | GND — Ground |
| ピン [DATA_NEEDED: TDI pin number] | TDI — JTAG boundary-scan test data in |
| ピン [DATA_NEEDED: TDO pin number] | TDO — JTAG boundary-scan test data out |
| ピン [DATA_NEEDED: TCK pin number] | TCK — JTAG test clock |
| ピン [DATA_NEEDED: TMS pin number] | TMS — JTAG test mode select |
| ピン [DATA_NEEDED: CLK pin numbers] | CLK — Global clock inputs to routed fabric |
主な用途
A42MX16-1PQG160 の用途: 6 件s: Legacy 5V Industrial Control Board Redesign, Secure Anti-Tamper Logic, Telecommunications Line Cards, High-Volume Consumer and Appliance Control, Test and Measurement Instrumentation, Mil-Aero and Transportation Legacy Sustainment.
Legacy 5V Industrial Control Board Redesign
The A42MX16's native 5.0V architecture directly interfaces with legacy TTL, ABstd-B, and 5V CMOS bus systems without level translators, which is why it remains a favored ASIC alternative for maintaining older industrial controllers. With 1,232 logic cells and 125 user I/O, one A42MX16 can consolidate multiple 22V10-class PLDs and glue logic into a single antifuse die, reducing BOM count and board area. The one-time-programmable fabric also powers up instantly with no configuration device, improving system boot reliability in factory equipment.
おすすめ
Secure Anti-Tamper Logic
Antifuse FPGAs are preferred where configuration security matters: unlike SRAM FPGAs, the A42MX16 stores its design physically in antifuse interconnect elements with no bitstream to intercept or read back. This makes it suitable for defense, gaming, and DRM-adjacent logic that must resist design extraction. The 24K-gate capacity accommodates authentication state machines, key-check logic, and protocol wrappers, while instant-on, non-volatile startup eliminates the configuration window that SRAM devices expose at power-up.
おすすめ
Telecommunications Line Cards
The MX family was widely deployed in telecom backplanes and line cards operating on 5V signaling. The A42MX16's 125 user I/O handle parallel data paths, TDM framing logic, and backplane handshaking at clock rates up to 94 MHz, adequate for E1/T1 framing and legacy PDH transport functions. Its commercial 0C to +70C rating suits central-office environments, and the 160-lead PQFP with 0.655 mm pitch supports standard reflow assembly on telecom PCBs designed around through-hole-era footprints upgraded to SMT.
おすすめ
High-Volume Consumer and Appliance Control
Microchip positions MX as a high-volume, low-cost ASIC alternative: the A42MX16 avoids ASIC NRE charges and mask lead times while providing hard-wired, one-time-programmed behavior identical from unit to unit. At 24K gates and 1,232 logic cells, it implements appliance sequencers, motor-control glue logic, keypad scanning, and display controllers. Unit pricing around $30 at 1K volume (as of 2026-08-30) and instant-on startup make it cost-competitive against microcontroller plus CPLD combinations in cost-sensitive products.
おすすめ
Test and Measurement Instrumentation
Bench instruments and ATE fixtures frequently retain 5V logic interfaces; the A42MX16 bridges this directly with its 5.0V-tolerant I/O and 125 available pins for stimulus/response channels. Its deterministic, one-time-programmed timing avoids SRAM FPGA configuration variability, and the -2 or -3 speed grades provide up to 94 MHz-plus toggle capability for counter, encoder, and trigger-path logic. Boundary-scan cells chained from TDI to TDO (per DS2316) support in-system interconnect testing of instrument backplanes.
おすすめ
Mil-Aero and Transportation Legacy Sustainment
Programs built on Actel MX silicon continue to require form-fit-function replacements; the A42MX16-1PQG160 sustains such platforms with identical die and package. Antifuse fabric tolerates radiation-induced configuration upsets better than SRAM (no configuration memory to corrupt), and its non-volatile instant-on behavior suits avionics and vehicle control units that must be operational at first power cycle. The industrial-temperature A42MX16-1PQG160I variant covers extended-environment deployments with the same footprint.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: A42MX16-1PQG160 — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | A42MX16-1PQG160I | A42MX16-2PQG160 | A42MX09-1PQG160I |
|---|---|---|---|---|
| Package | PQFP-160 (PQG160) | PQFP-160 - same | PQFP-160 - same | PQFP-160 - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| System Gates | 24,000 | 24,000 | 24,000 | 9,000 |
| Speed Grade | -1 | -1 | -2 (faster) | -1 |
| Operating Temperature | 0C to +70C | -40C to +85C | 0C to +70C | -40C to +85C |
| Supply Voltage | 5.0 V | 5.0 V | 5.0 V | 5.0 V |
| Programming Technology | Antifuse OTP | Antifuse OTP | Antifuse OTP | Antifuse OTP |
主な差別化要因
- Native 5.0V I/O eliminates level shifters （vs A42MX16-2PQG160)
- Antifuse security with instant-on startup （vs XC4000XLA-class SRAM FPGAs)
- Industrial temperature drop-in available （vs A42MX16-1PQG160I)
設計ノート
Decouple each VDD pin with 0.1 uF ceramic capacitors placed within 5 mm of the pin, plus at least one 10 uF bulk capacitor per device. The 5.0V MX fabric draws transient shoot-through current during logic transitions; an inadequate power plane causes intermittent timing failures that are difficult to diagnose on OTP devices. Measure supply ripple under worst-case toggling patterns before committing the design to antifuse programming.
Antifuse programming is irreversible. Complete full post-layout timing simulation in Libero SoC and, where feasible, validate on an A42MX24 (larger die, same family) or a prototype A42MX16 before burning production parts. Reserve approximately 20% logic headroom; designs exceeding 80% utilization risk route congestion failures that cannot be fixed after programming.
The 160-lead PQFP with 0.655 mm pitch requires solder-mask-defined or non-solder-mask-defined pads per IPC-SM-782-style QFP land patterns; use 0.55 mm-wide lands with 0.65 mm pitch routing escape. Keep clock traces length-matched and away from I/O returns. Inspect QFP leads with X-ray or 3D AOI to catch coplanarity-related open joints after reflow.
The boundary-scan chain (TDI through all cells to TDO, per DS2316) enables interconnect test after assembly. Use TCK series termination (22-33 ohm) to limit ringing, and do not leave TMS/TDI floating - pull TMS high through 10K ohm. Undriven JTAG inputs on 5V fabric can float into indeterminate levels and cause scan-chain lockup during production test.
コンプライアンス情報
G suffix in ordering code denotes lead-free per distributor listings (PCB Electronics, Kynix). Full REACH/halogen status not stated in retrieved data.
