A54SX32A-2FGG256I - 48K Gate FPGA, 256-BGA | Microchip Technology
部品番号: A54SX32A-2FGG256I ✓ 生産中| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $395 | $395.00 |
| 10 | $380 | $3,800.00 |
| 100 | $372 | $37,200.00 |
| 500 | $370 | $185,000.00 |
| 1,000 | $368.59 | $368,590.00 |
A54SX32A-2FGG256I 概要
An FPGA (Field-Programmable Gate Array) is a semiconductor device containing a fabric of configurable logic cells and routing resources that designers program to implement custom digital circuits. Within the programmable-logic hierarchy, the SX-A family sits among one-time-programmable (OTP), antifuse-based FPGAs, sitting above simple SPLD/CPLD devices and providing gate-array-class density with the flexibility of field programming.
Key differentiating features of the A54SX32A-2FGG256I include its antifuse interconnect architecture, which is non-volatile and inherently immune to configuration-bit upsets, low static power typical of 2.5 V 0.25 um CMOS process technology, and no external configuration PROM requirement - the device is live and configured at power-up. With 2880 logic cells (approximately 48,000 equivalent system gates), it integrates glue logic, bus interfaces, state machines, and control functions that previously required multiple TTL/PLD devices into a single low-cost chip.
Technical depth: the SX-A architecture combines logic modules with dedicated routing channels, achieving predictable, low-skew timing. The 0.25 um CMOS antifuse process gives very low interconnect parasitic capacitance versus SRAM FPGAs of the era, supporting system performance up to 313 MHz toggle rates while minimizing dynamic power. The 256-ball FBGA provides 203 flexible user I/O with industry-standard 2.5 V/3.3 V-compatible I/O banks and surface-mount reflow assembly.
Typical applications include industrial control and automation boards, telecommunications line cards, military/aerospace upgrade programs where OTP configuration security matters, embedded glue-logic consolidation, and legacy system life-extension designs that must remain sourced for years.
Design consideration: because the device is one-time programmable, verify timing closure and pin assignment in Libero SoC before programming - there is no rework path after antifuse programming, so budget a small pilot run of programmed units for validation.
This page synthesizes distributor pricing and stock data, same-footprint drop-in speed-grade and temperature-grade alternatives, and practical design notes not found in the manufacturer datasheet, with pricing as of 2026-09-03.
ドロップイン代替品: A54SX32A-2FGG256I — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: A54SX32A-2FGG256I （同一形状・フットプリント） — 相違点: Package, System Gates, Operating Temperature, RoHS Status, Family.
クイック比較ツール — 並列比較する代替部品を選択:
A54SX32A-1FGG256
✅ ドロップイン✓ 在庫あり
$1 / 個
データシートを見る →A54SX32A-1FGG256I
✅ ドロップイン✓ 在庫あり
$316.27 / 個
データシートを見る →A54SX32A-FFG256I
✅ ドロップイン📋 参考代替品（カタログ未掲載）
A54SX32A-FGG256I
✅ ドロップイン✓ 在庫あり
$83.27 / 個
データシートを見る →A54SX32A-2FG256M
✅ ドロップイン📋 参考代替品（カタログ未掲載）
A54SX32A-2FGG256I 最大定格＆電気的特性
| Family | SX-A (antifuse FPGA) |
| System Gates | 48000 gates |
| Logic Cells / Modules | 2880 |
| User I/O | 203 |
| Supply Voltage (Core) | 2.5 V (2.25 V to 2.75 V) |
| Speed Grade | -2 |
| Maximum Toggle Frequency | 313 MHz |
| Technology | 0.25 um CMOS antifuse |
| Programmability | One-Time Programmable (OTP), non-volatile |
| パッケージ | 256-BGA (FBGA, FGG256) |
| 実装タイプ | Surface Mount |
| 動作温度 | -40C to +85C (industrial) |
| External Configuration PROM | Not required |
| RoHS ステータス | Lead free / RoHS compliant |
| Typical Application Tools | Microchip Libero SoC design suite |
| Number of Distributors Listed | 6 (per Octopart, as of 2026-09-03) |
A54SX32A-2FGG256I 256-bga (fbga, fgg256) ピン配置ガイド
A54SX32A-2FGG256I (256-bga (fbga, fgg256) パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: A54SX32A-2FGG256I.
詳細は データシート をご参照ください。
主な用途
A54SX32A-2FGG256I の用途: 6 件s: Industrial Control and Automation, Defense and Aerospace Sustainment, Telecommunications Line Cards, Glue Logic Consolidation, Embedded Systems and Test Instrumentation, Legacy System Life Extension.
Industrial Control and Automation
The A54SX32A-2FGG256I fits industrial control boards that need deterministic glue logic, bus bridging, and sequencing under one chip: its 48,000 system gates and 2880 logic cells absorb address decoders, PWM generators, and state machines, while 203 user I/Os interface PLC backplanes directly. The 2.5 V core with -40C to +85C industrial rating survives factory-floor temperature swings, and the antifuse OTP configuration means the logic is active at the instant power is applied - no configuration boot delay that could stall a safety interlock. Because the antifuse fabric avoids configuration-memory bit upsets, designs deployed for a decade in noisy motor-drive cabinets retain their programmed function. Trade-off: any logic change requires programming new units, so lock the design before volume assembly.
おすすめ
Defense and Aerospace Sustainment
Legacy defense and avionics platforms widely deployed SX-A FPGAs, and the A54SX32A-2FGG256I remains a sustainment staple precisely because it is OTP: configuration data cannot be read out or corrupted by atmospheric-radiation-induced configuration upsets, a key security and reliability property for military programs. The industrial -40C to +85C rating, 203 I/Os, and 313 MHz class toggle performance cover radar interface, telemetry, and bus-interface boards. Microchip's continued production of the SX-A family lets long-lifecycle programs re-buy the exact speed-grade part instead of redesigning. Program the design into a pilot batch and archive the programming files and fuse-map; OTP means spares must be pre-programmed or programmed at depot.
おすすめ
Telecommunications Line Cards
Telecom line-card designs use the A54SX32A-2FGG256I to consolidate backplane framing logic, TDM transport, and board-level control into one antifuse device. The SX-A architecture's low interconnect capacitance supports the 313 MHz class toggle rates needed for high-speed counters and serial framing, while the 256-ball FBGA packs 203 I/O into a compact surface-mount footprint suited to high-density shelf cards. The OTP fabric starts up instantly at slot insertion, avoiding configuration-download latency across a backplane, and the 2.5 V core keeps static power low across racks of populated shelves. Verify timing against the -2 grade in Libero SoC at worst-case temperature before locking the fuse map.
おすすめ
Glue Logic Consolidation
The classic SX-A use case is replacing dozens of TTL, PAL, GAL, and CPLD devices with one A54SX32A-2FGG256I: 48,000 system gates comfortably absorb address decoding, bus transceiving, interrupt aggregation, and handshaking that previously spanned multiple packages. Consolidation cuts BOM count, board area, and assembly cost - Microchip positions SX-A explicitly as a 'single-chip, low-cost integration' solution. The 203 I/O count covers wide microprocessor and legacy bus widths, and instant-on OTP behavior removes reset-order dependencies that SRAM FPGAs introduce. When migrating multi-PLD designs, re-verify total timing paths in Libero SoC because a single FPGA places all paths in one timing domain.
おすすめ
Embedded Systems and Test Instrumentation
Embedded controllers and bench/test instruments use the A54SX32A-2FGG256I as a deterministic coprocessor for counters, encoders, trigger engines, and interface translation between MCU buses and custom peripherals. The 313 MHz class toggle capability supports high-resolution event timing, the 2.5 V core holds static power low for benchtop thermal budgets, and the 256-ball FBGA's 0.8/1.0 mm-class ball pitch reflows on standard SMT lines. Because the antifuse configuration is fixed, instrument firmware revisions that only change software never require re-programming the FPGA - a practical advantage for calibration-stable instruments. Reserve spare pre-programmed units; OTP rules out field logic updates.
おすすめ
Legacy System Life Extension
When a legacy board's original FPGA reaches end-of-availability, the A54SX32A-2FGG256I frequently serves as the re-buy part for systems originally designed around the A54SX32A family, since Microchip/Microsemi has maintained SX-A production specifically for installed-base support. Designers can regenerate the original netlist or RTL in Libero SoC, retarget to the -2 FGG256 device, and manufacture new boards matching the original footprint. The OTP architecture guarantees the replacement behaves identically to the original at every power cycle. This page's drop-in alternatives list (-1 and standard grades in the same footprint) provides fallbacks when the -2 grade goes on allocation.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: A54SX32A-2FGG256I — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | A54SX32A-1FGG256 | A54SX32A-1FGG256I | A54SX32A-FFG256I | A54SX32A-2FG256M |
|---|---|---|---|---|---|
| Package | 256-BGA (FGG256) | 256-BGA (FGG256) - same | 256-BGA (FGG256) - same | 256-BGA (FBGA) - same footprint, verify suffix | 256-BGA (PBGA) - verify FG vs FGG ball map |
| Brand | Microchip Technology (Microsemi) | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| System Gates | 48000 | 48000 | 48000 | 48000 | 48000 |
| User I/O | 203 | 203 | 203 | 203 | 203 |
| Speed Grade | -2 | -1 | -1 | standard | -2 |
| Core Supply Voltage | 2.5 V | 2.5 V | 2.5 V | 2.5 V | 2.5 V |
| Configuration Type | OTP antifuse, no config PROM | OTP antifuse | OTP antifuse | OTP antifuse | OTP antifuse |
主な差別化要因
- Fastest -2 speed grade in the FGG256 footprint （vs A54SX32A-1FGG256)
- OTP antifuse security and instant-on （vs A54SX32A-FFG256I)
- Same-ball-count PBGA variant exists for cost/layout flexibility （vs A54SX32A-2FG256M)
- Honest trade-off: no cross-brand pin-compatible alternative （vs A54SX72A-2FGG484I)
設計ノート
The A54SX32A-2FGG256I is one-time programmable (OTP). Complete full timing closure and I/O verification in Microchip Libero SoC before programming: there is no field rework path once antifuses are blown. Run a pilot batch of at least 5-10 programmed units through full functional and temperature validation (-40C to +85C for the I grade) before committing production volume. Archive the fuse map and programming files for sustainment.
Plan the power tree around the 2.5 V core supply (2.25 V to 2.75 V range). Estimated: core current depends on toggle activity; with low interconnect capacitance typical of antifuse fabric, dynamic power scales with switching frequency - verify against the SX-A power calculator in Libero SoC using your actual design utilization rather than relying on gate-count estimates. Decouple VCC and ground with at least 0.1 uF per power pin group plus bulk capacitance near the BGA.
For the 256-ball FBGA, use a standard 256-BGA land pattern with via-in-pad or dog-bone fanout; the fine pitch typically requires 4-mil trace/space and microvias on high-density boards. Confirm the ball map is FGG (fine-pitch) not FG before layout - the A54SX32A-2FG256M uses the FG/PBGA variant and is NOT footprint-identical despite the same ball count. Follow MSL floor-life rules from the datasheet before reflow.
For high-frequency signals (the SX-A fabric supports up to 313 MHz class toggle rates), keep board-level clock traces length-matched and impedance-controlled; assign fast I/O to balls adjacent to ground return vias to minimize loop inductance. Because the device is a legacy part, verify I/O standards supported per bank against the SX-A datasheet I/O tables rather than assuming modern voltage standards.
コンプライアンス情報
Distributor listings (Microchip USA, globalspec) identify the A54SX32A-2FGG256I as lead free; RoHS compliance per distributor data. REACH, halogen-free, and conflict-minerals status not stated in provided data.
