AD4030-24BCPZ - 24-Bit 2 MSPS SAR ADC | Analog Devices
部品番号: AD4030-24BCPZ ✓ 生産中| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $45.2 | $45.20 |
| 10 | $41.8 | $418.00 |
| 100 | $36.5 | $3,650.00 |
| 500 | $32.9 | $16,450.00 |
| 1,000 | $29.4 | $29,400.00 |
AD4030-24BCPZ 概要
A SAR ADC is a type of analog-to-digital converter that uses a binary search algorithm to convert an analog input into a digital output. It is known for its high speed, low power consumption, and excellent accuracy, making it ideal for applications requiring precise measurements. The AD4030-24 belongs to the family of precision SAR ADCs, which are essential components in data acquisition systems, instrumentation, and industrial control.
Key features of the AD4030-24 include a typical dynamic range of 109 dB when using a 5 V reference, a low noise floor that enables signal chains requiring less gain and lower power, and a versatile Flexi-SPI serial peripheral interface (SPI) that eases host processor integration. The Flexi-SPI supports multiple SDO lanes, optional DDR data clocking, and echo clock mode, allowing the serial clock to be reduced to 10 MHz while operating at 2 MSPS. This simplifies the use of digital isolators and relaxes timing requirements.
The AD4030-24 supports both single-ended and differential input signals, and its Easy Drive analog inputs improve settling, broadening the selection of compatible analog front-end components. The device also includes several digital and data processing features that can be enabled via control registers, such as digital averaging and offset calibration.
Typical applications include precision data acquisition systems, medical instrumentation, industrial process control, and scientific instrumentation. The low noise and high linearity make it suitable for applications requiring high dynamic range, such as vibration analysis and spectroscopy.
When designing with the AD4030-24, it is important to provide a clean, low-noise reference voltage and adequate decoupling on the power supply pins. The Flexi-SPI interface should be configured according to the host processor's capabilities to optimize data throughput and timing.
ドロップイン代替品: AD4030-24BCPZ — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: AD4030-24BCPZ （同一形状・フットプリント） — 相違点: Architecture, Input Type, Package, Resolution, Dynamic Range.
クイック比較ツール — 並列比較する代替部品を選択:
AD4030-24BBCZ
✅ ドロップイン📋 参考代替品（カタログ未掲載）
AD4032-24BBCZ
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品（カタログ未掲載）
ADS127L11
✅ ドロップイン ⚠️ 仕様未検証✓ 在庫あり
$8.1 / 個
データシートを見る →AD4030-24BCPZ-RL7
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品（カタログ未掲載）
AD4030-24BCPZ-RL
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品（カタログ未掲載）
AD4030-24BCPZ 最大定格＆電気的特性
| 分解能 | 24 bit |
| サンプリングレート | 2 MSPS |
| Number of Inputs | 1 |
| Input Type | Single-ended, Differential |
| Architecture | SAR |
| Integral Nonlinearity (INL) | ±0.9 ppm max |
| Dynamic Range | 109 dB typical (5 V reference) |
| SINAD | 108.4 dB |
| インターフェース | Flexi-SPI (multiple SDO lanes, DDR) |
| パッケージ | 64-CSPBGA (7x7 mm) |
| 動作温度 | -40°C to +125°C |
| 基準電圧 | 5 V (typical) |
| 実装タイプ | Surface Mount |
AD4030-24BCPZ ピン構成
| ピン A1 | VREF — Reference voltage input |
| ピン A2 | AVDD — Analog power supply |
| ピン A3 | AVSS — Analog ground |
| ピン A4 | IN+ — Positive analog input |
| ピン A5 | IN- — Negative analog input |
| ピン B1 | DVDD — Digital power supply |
| ピン B2 | DGND — Digital ground |
| ピン B3 | SCLK — Serial clock input |
| ピン B4 | SDI — Serial data input |
| ピン B5 | SDO — Serial data output |
| ピン C1 | CS — Chip select (active low) |
| ピン C2 | RESET — Reset input |
| ピン C3 | BUSY — Busy output |
| ピン C4 | GPIO — General purpose I/O |
主な用途
AD4030-24BCPZ の用途: 6 件s: Precision Data Acquisition Systems, Medical Instrumentation, Industrial Process Control, Scientific Instrumentation, Vibration Analysis, Audio Test and Measurement.
Precision Data Acquisition Systems
The AD4030-24BCPZ is ideal for precision data acquisition systems requiring high resolution and accuracy. Its 24-bit resolution and 2 MSPS sampling rate enable accurate digitization of analog signals with a dynamic range of 109 dB. The low noise floor reduces the need for additional gain stages, simplifying the signal chain and lowering power consumption. The Flexi-SPI interface allows easy integration with microcontrollers and FPGAs, making it suitable for multi-channel systems where high throughput is essential.
おすすめ
Medical Instrumentation
In medical instrumentation, the AD4030-24BCPZ provides the high precision needed for diagnostic equipment such as MRI, ultrasound, and patient monitoring. Its 24-bit resolution and low INL of ±0.9 ppm ensure accurate measurement of physiological signals. The wide operating temperature range of -40°C to +125°C makes it suitable for medical devices that must operate reliably in various environments. The Easy Drive inputs simplify the interface to sensors, reducing external component count and design complexity.
おすすめ
Industrial Process Control
The AD4030-24BCPZ is well-suited for industrial process control applications such as temperature, pressure, and flow measurement. Its high accuracy and stability over temperature ensure reliable operation in harsh industrial environments. The Flexi-SPI interface supports long-distance data transmission with digital isolators, enabling robust communication in noisy factory settings. The low power consumption of the ADC helps reduce overall system power, which is critical for remote or battery-powered industrial sensors.
おすすめ
Scientific Instrumentation
For scientific instrumentation like spectrometers, oscilloscopes, and particle detectors, the AD4030-24BCPZ offers the high dynamic range and low noise required for precise measurements. Its 109 dB dynamic range allows detection of small signals in the presence of large backgrounds. The 2 MSPS sampling rate enables fast data acquisition, essential for capturing transient events. The device's small 64-CSPBGA package saves board space, allowing for compact instrument designs.
おすすめ
Vibration Analysis
The AD4030-24BCPZ is excellent for vibration analysis in predictive maintenance and structural health monitoring. Its high resolution and low noise floor enable detection of subtle vibration signatures, while the 2 MSPS sampling rate captures high-frequency components. The device's differential input capability allows direct connection to accelerometers, reducing signal conditioning complexity. The wide temperature range ensures reliable operation in outdoor or industrial environments where vibration monitoring is critical.
おすすめ
Audio Test and Measurement
In audio test and measurement, the AD4030-24BCPZ provides the high resolution and low distortion needed for accurate audio analysis. Its 24-bit resolution and 108.4 dB SINAD ensure faithful digitization of audio signals, making it suitable for audio analyzers and production test equipment. The Flexi-SPI interface allows easy connection to DSPs or FPGAs for real-time processing. The low power consumption is beneficial for portable audio test devices.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: AD4030-24BCPZ — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | AD4030-24BBCZ | AD4032-24BBCZ | ADS127L11 |
|---|---|---|---|---|
| Package | 64-CSPBGA (7x7) | 64-CSPBGA (7x7) | 64-CSPBGA (7x7) | 64-CSPBGA (7x7) |
| Brand | Analog Devices | Analog Devices | Analog Devices | Texas Instruments |
| Resolution | 24 bit | 24 bit | 24 bit | 24 bit |
| Sampling Rate | 2 MSPS | 2 MSPS | 2 MSPS | 2 MSPS |
| Number of Inputs | 1 | 1 | 2 | 1 |
| Interface | Flexi-SPI | Flexi-SPI | Flexi-SPI | SPI |
主な差別化要因
- Higher dynamic range （vs ADS127L11)
- Flexi-SPI interface （vs ADS127L11)
- Same-brand drop-in availability （vs AD4030-24BBCZ)
設計ノート
Provide clean power supplies for AVDD and DVDD. Use low-dropout regulators (LDOs) with low noise and high PSRR to minimize supply-induced errors. Decouple each supply pin with 0.1 uF and 10 uF capacitors placed close to the device. The reference voltage (VREF) should be driven by a low-noise reference, such as the ADR4550, to achieve the specified dynamic range.
For optimal performance, use a solid ground plane and separate analog and digital ground areas, connecting them at a single point. Route analog inputs away from digital traces to minimize coupling. Place the ADC close to the signal source to reduce trace inductance. Use differential routing for the analog inputs to maintain signal integrity.
Avoid driving the analog inputs beyond the specified common-mode range, as this can cause linearity errors. Ensure the reference voltage is stable and well-filtered. When using the Flexi-SPI interface, configure the SDO lanes and DDR mode correctly to avoid data corruption. Also, verify that the host processor's SPI timing meets the ADC's setup and hold times.
コンプライアンス情報
RoHS compliant per Analog Devices product page. Not AEC-Q100 qualified.
