Analog Devices

AD506KH - Low-Offset JFET Op Amp | Analog Devices | TO-99-8

部品番号: AD506KH ✗ 生産終了
1500 µV maximum Vdss TO-99-8 Package
MOQ: 1 |

AD506KH 概要

The Analog Devices AD506KH is a single-circuit JFET-input operational amplifier packaged in an 8-lead TO-99 metal can. It is intended for instrumentation and low-frequency signal-conditioning applications where a JFET input stage and an offset voltage of no more than 1500 µV provide useful input and DC accuracy characteristics. The part is offered in a round, 8-terminal package identified as TO-99-8.

An operational amplifier is an analog integrated circuit that amplifies the voltage difference between its inverting and non-inverting inputs. The JFET-input topology places the AD506KH in the amplifier family traditionally selected for instrumentation, buffer, and high-impedance signal paths. Within the broader semiconductor hierarchy, the AD506KH is an integrated circuit, an analog amplifier, and specifically a single-amplifier operational amplifier rather than a comparator, reference, or power-management device.

The AD506KH provides one amplifier circuit in an 8-terminal metal-can package. Its advertised maximum input offset voltage is 1500 µV, making offset behavior a principal selection criterion when the amplifier operates near DC. The JFET-input designation indicates the device family’s suitability for circuits handling high-impedance sources, while the single-circuit package allows one amplifier per physical component.

The AD506KH is cataloged as a commercial-grade part that is not AEC-Q100 qualified. Its through-hole TO-99-8 construction supports insertion into suitable sockets, prototyping platforms, legacy analog modules, and selected industrial or instrumentation assemblies. The package has eight physical terminals in a round metal enclosure, which requires care when assigning signal, supply, and compensation connections during schematic capture and PCB layout.

Typical uses include low-frequency instrumentation amplifiers, high-impedance sensor interfaces, analog buffers, waveform conditioning, laboratory measurement circuits, and legacy industrial control modules. In these applications, the single JFET-input amplifier can serve as the active element in non-inverting or inverting signal-conditioning stages. Design selection should account for the device’s 1500 µV maximum offset voltage, supply requirements, gain-bandwidth behavior, input noise, and stability requirements.

The primary design consideration is package-aware implementation. Because AD506KH uses a metal-can TO-99-8 package rather than a modern surface-mount footprint, PCB designs must provide appropriate hole spacing, mechanical clearance, and pin assignments. Designers should also confirm the exact manufacturer pinout, supply voltage, offset trim configuration, and stability requirements against the Analog Devices AD506 documentation before fabrication.

This product record combines package and lifecycle information with practical selection guidance, sourcing instructions, and design notes for engineers maintaining TO-99 analog assemblies. It supports direct comparison with other legacy instrumentation amplifiers while emphasizing that any substitute must be validated for footprint, pinout, supply range, offset voltage, bandwidth, noise, and stability rather than selected by amplifier type alone.

ドロップイン代替品: AD506KH — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。

この製品に利用可能なドロップイン代替品はありません。

代替品をリクエスト

AD506KH 最大定格&電気的特性

Amplifier Type JFET-input operational amplifier
Number of Circuits 1 circuit
Number of Terminals 8 terminals
Package Type TO-99-8
Package Shape Round
Terminal Form Wire
Input Offset Voltage 1500 µV maximum
Temperature Grade Commercial
実装タイプ Through-hole
MSLレベル 3 (168 hours)
REACH Status REACH affected
RoHS ステータス Non-compliant
Qualification Not qualified
HTSUS Code 8542.33.0001

AD506KH round ピン配置ガイド

AD506KH (round パッケージ) のピン配置。 このアナログコンポーネントは、入力、出力、および電源ピンを備えています。オフセットナル、補償、イネーブルピンの設定については、メーカーのデータシートを参照してください。信号調整やアンプ回路に最適です。

AD506KH の round パッケージピン配置図

詳細なピン配置データはありません: AD506KH.

詳細は データシート をご参照ください。

主な用途

AD506KH の用途: 6 件s: High-Impedance Instrumentation Signal Conditioning, Precision Analog Buffering, Laboratory Waveform Conditioning, Legacy Industrial Control Module Repair, Low-Frequency Sensor Interface, Audio and Low-Frequency Active Filters.

🏭

High-Impedance Instrumentation Signal Conditioning

The AD506KH fits low-frequency instrumentation paths that use a JFET-input amplifier to present a manageable impedance to a high-impedance sensor. Its advertised maximum input offset voltage of 1500 µV establishes the DC-offset boundary that must be included in measurement-error analysis, particularly when the useful sensor output is small. The amplifier can serve as a non-inverting or inverting conditioning stage around the sensor, with the final gain, bandwidth, and compensation choices validated against the complete AD506 electrical data. Because the device uses an 8-terminal TO-99-8 metal can, the implementation should preserve the legacy footprint and pin assignment rather than assume a generic eight-pin amplifier layout.

⚡

Precision Analog Buffering

The AD506KH can be used as an analog buffer when a sensor or reference source cannot drive the next circuit directly. A JFET-input operational amplifier is traditionally suited to impedance buffering because it reduces loading while preserving low-frequency signal integrity. The amplifier’s 1500 µV maximum input offset voltage must be considered when buffering near-DC measurements, since that offset can translate into a meaningful error after gain amplification. Designers should verify input bias current, output drive, noise, and stability from the manufacturer documentation and should use the exact TO-99-8 pinout when creating the buffer stage.

🖥️

Laboratory Waveform Conditioning

The AD506KH is applicable to laboratory and educational circuits that require a single amplifier in an established legacy instrument. Its JFET-input construction can support measurement interfaces dealing with moderate-to-high source impedance, while the 1500 µV maximum offset voltage provides a defined limit for DC calibration. In a practical circuit, the part can condition a low-frequency sensor waveform before display, digitization, or control. The mechanical choice is important: the round TO-99-8 package requires a compatible socket or through-hole footprint and adequate clearance from adjacent components.

🔧

Legacy Industrial Control Module Repair

The AD506KH is useful for maintaining a legacy industrial control module whose original amplifier stage depends on the TO-99-8 footprint, JFET-input topology, and established pinout. In repair and obsolescence-management situations, retaining the original device type can avoid respinning a board and changing a signal path that has already been qualified. The 1500 µV maximum offset voltage should be checked against the module’s acceptable measurement error. Before ordering replacements, confirm the temperature grade, supply configuration, offset-adjust provisions, and compensation values against the circuit documentation.

🧩

Low-Frequency Sensor Interface

The AD506KH can serve in a low-frequency sensor interface where a transducer produces a relatively high-impedance signal requiring amplification before an ADC or control input. Its JFET-input architecture is relevant to this use, while the defined 1500 µV maximum offset voltage helps bound the static error introduced by the amplifier. The practical design must evaluate sensor leakage, input bias current, cable capacitance, source noise, and gain stability. TO-99-8 mechanical requirements also make this solution more appropriate for legacy or long-life equipment than for compact new sensor modules.

🎧

Audio and Low-Frequency Active Filters

The AD506KH may be used in low-frequency active-filter and audio-buffer circuits where the system benefits from a JFET-input amplifier and a single-circuit metal-can implementation. Its 1500 µV maximum offset voltage can create DC shift that influences headroom in an audio path, so the biasing and filter topology should be evaluated at the lowest intended frequency. The designer should confirm gain-bandwidth product, output swing, noise, and internal or external compensation requirements from the manufacturer documentation. The TO-99-8 footprint makes it particularly relevant to repairs of existing audio and test equipment.

Where to buy AD506KH online?
The AD506KH can be requested through the “Request a Quote” form on this page, which is the recommended route for obtaining an exact AD506KH quotation, current stock status, and production quantity. The exact MPN is important because legacy TO-99 amplifiers can differ in pinout, offset grade, temperature range, and mounting configuration. The request should identify the required package form, target quantity, acceptable delivery date, and whether the amplifier will be installed directly or placed in a socket.
What is the price of AD506KH?
Use the “Request a Quote” form on this page for the current AD506KH price and volume breaks. Price depends on quantity, condition, packaging, and market availability for this legacy component. A quotation should preserve the exact AD506KH MPN because superficially similar AD506-family devices may differ in temperature grade, offset specification, pin assignment, or package marking. The structured pricing area on this page should be used for the freshest commercial response.
What is the lead time for AD506KH?
Request the current lead time through the “Request a Quote” form on this page. Because AD506KH is a legacy TO-99-8 amplifier, availability may depend on original, new-old-stock, or authorized inventory rather than an active high-volume production run. Include your required quantity and target delivery date in the request. Also state whether a factory-sealed package, individual inspection, or documented traceability is necessary for the application.
Is AD506KH in stock?
AD506KH is shown as in stock by one product listing, but stock levels for legacy components can change quickly. Use the “Request a Quote” form on this page to confirm current availability for the exact MPN before committing a build schedule. The confirmation should cover quantity, package condition, inspection requirements, and shipment timing. For maintenance and long-lifecycle equipment, requesting multiple sourcing lots can reduce the risk of a single available lot being exhausted.
What are the key specifications of AD506KH that engineers should know?
The AD506KH is a single-circuit, JFET-input operational amplifier in an 8-terminal TO-99-8 package. Catalog information identifies a maximum input offset voltage of 1500 µV, commercial temperature grade, wire-form terminals, and a round package. Its construction is associated with instrumentation, buffer, and op-amp applications. Supply limits, gain-bandwidth product, bias current, noise, output-current capability, and the complete temperature range must be confirmed from the manufacturer documentation before final circuit design.
What is the AD506KH package and pin configuration?
The AD506KH uses a round TO-99-8 metal-can package with eight wire-form terminals and through-hole mounting. The catalog record confirms the terminal count and package form but does not provide a complete pin-number-to-function assignment. Use the pin-description table and package drawing in the Analog Devices AD506 documentation before assigning offset, input, output, supply, and compensation connections. Do not infer pin functions from generic TO-99 examples because amplifier and regulator packages can use the same mechanical outline.
Where to download the AD506KH datasheet PDF?
The AD506KH documentation entry point is the Rochester Electronics AD506KH datasheet record linked on this page. It identifies the part as a JFET-input, one-circuit operational amplifier in TO-99-8 and provides access to legacy technical documentation. Before releasing a design, verify the document revision and confirm that its ordering table and pinout apply specifically to the KH suffix. The datasheet is the controlling source for supply voltage, compensation, offset adjustment, and electrical limits.
Where to find the AD506KH pinout?
The AD506KH pinout must be taken from the package drawing and pin-description table in the Analog Devices AD506 documentation, accessed through the Rochester Electronics datasheet record on this page. The verified catalog data confirms eight wire terminals but does not enumerate their functions, so assigning a complete pin list here would risk incorrect wiring. Check the pin-1 orientation mark, exposed terminal functions, offset-adjust connection, and compensation requirements directly against the manufacturer drawing before PCB or socket design.
What can replace the AD506KH?
A valid AD506KH replacement must match the exact TO-99-8 footprint, eight-terminal pin assignment, supply voltage, offset voltage, gain-bandwidth product, input bias current, noise, compensation method, and operating temperature range. No independently validated drop-in substitute is established for the cross-reference searches performed for this part. Treat any proposed amplifier as an engineering-equivalent candidate until its manufacturer datasheet has been checked against every AD506KH operating limit and the physical pinout has been compared terminal by terminal.
Is AD506KH the same as other AD506 amplifier versions?
The AD506KH is not automatically interchangeable with every other AD506-family device based on the family name alone. The KH suffix identifies a specific commercial-grade TO-99-8 configuration with a 1500 µV maximum input offset voltage, while related versions may differ in package, temperature grade, offset class, or electrical characteristics. Compare the exact ordering code and manufacturer pinout. For a maintenance substitution, the practical criterion is not only amplifier type but complete pin-to-pin and parametric compatibility.
AD506KH versus a modern operational amplifier: which is better for legacy instrumentation?
The AD506KH is preferable when an existing legacy circuit specifically depends on its JFET-input behavior, offset specification, TO-99-8 footprint, and established board-level pinout. A modern amplifier may offer better bandwidth, noise, supply range, packaging, or availability, but it can require PCB changes and require compensation or biasing adjustments. For an existing TO-99 design, footprint and function compatibility usually matter more than headline specifications. For a new design, compare the complete signal-chain requirements before choosing the legacy metal-can package.
When should I choose AD506KH instead of redesigning with a surface-mount amplifier?
Choose the AD506KH when maintaining an existing TO-99-8 assembly where redesign would require new layout, risk functional differences, or jeopardize a long-running production program. Its JFET-input architecture and advertised 1500 µV maximum offset voltage support its historical use in instrumentation and buffering. A surface-mount amplifier is usually preferable for a new, high-volume design because it simplifies assembly and offers broader sourcing, but only after checking bias current, noise, stability, compensation, and output-drive requirements.
Is AD506KH suitable for high-impedance sensor measurement?
The AD506KH can be appropriate for high-impedance, low-frequency sensor interfaces because it is a JFET-input operational amplifier with a specified maximum input offset voltage of 1500 µV. Suitability depends on the sensor’s effective impedance, source capacitance, required bandwidth, and noise floor. Add the necessary input bias current to assess output error and use guarding or shielding where leakage and stray capacitance matter. Verify the complete electrical limits in the manufacturer documentation before fixing the signal-chain gain.
What are the RoHS and REACH statuses of AD506KH?
The AD506KH is listed as RoHS non-compliant and REACH affected, with an HTSUS classification of 8542.33.0001. It is also identified as not qualified for AEC-Q100 applications. These declarations apply to the exact legacy component and its material composition, so a proposed replacement should be evaluated independently for environmental and automotive requirements. Legacy products that are not RoHS compliant generally need restricted handling in newer commercial and industrial procurement programs.
How should the AD506KH be handled and mounted?
Handle the AD506KH as a sensitive through-hole metal-can amplifier and observe the component’s moisture-sensitivity classification of MSL 3, which specifies a 168-hour floor-life period. Inspect the leads and can for damage before insertion, and avoid excessive force that could bend or stress the package. Use a compatible socket or carefully formed through-holes, maintain clearance for the round can, and verify pin-1 orientation against the manufacturer package drawing. Follow controlled soldering and handling procedures for MSL 3 devices.

エンジニアリング参考データ: AD506KH — 比較、設計ガイダンス、コンプライアンス情報。

選定ガイド

Choose the AD506KH when maintaining an existing TO-99-8 circuit in which footprint, pinout, JFET-input behavior, and the 1500 µV maximum offset specification are important. It is particularly defensible for long-life industrial, laboratory, and instrumentation equipment where redesigning the board could introduce risk. A modern surface-mount amplifier may be a better choice for a new design because it can offer broader sourcing, smaller size, and improved bandwidth or noise performance, but only after its electrical behavior and compensation requirements are reconciled with the circuit. No cross-manufacturer drop-in substitute is established for this part, so any candidate requires terminal-by-terminal and parameter-by-parameter validation. Use the exact manufacturer documentation to confirm supply voltage, offset trim, bias current, noise, stability, and temperature limits before placing an order.

代替品との比較

パラメータ この製品
Brand Analog Devices
Package TO-99-8
Amplifier Type JFET-input operational amplifier
Number of Circuits 1 circuit
Number of Terminals 8 terminals
Maximum Input Offset Voltage 1500 µV
Temperature Grade Commercial
Mounting Type Through-hole
RoHS Status Non-compliant
REACH Status REACH affected

主な差別化要因

  • Legacy-compatible JFET-input amplifier architecture (vs Modern surface-mount operational amplifier)
  • Defined DC offset limit for legacy signal paths (vs Unqualified generic replacement)
  • Single amplifier in an eight-terminal metal can (vs Dual or multi-amplifier modern package)

設計ノート

Treat the AD506KH as an eight-terminal TO-99-8 metal-can device and assign every connection from the manufacturer pin-description table. Do not derive pin functions from a generic TO-99 package drawing because the same mechanical outline can be used for different pin arrangements. Preserve the manufacturer-specified pin-1 orientation, provide adequate body clearance, and use a socket when maintenance interchangeability is more important than permanent soldering.

Evaluate source capacitance, input bias current, and the 1500 µV maximum offset voltage together when the amplifier follows a high-impedance sensor. Long PCB traces can increase leakage and stray capacitance, while high closed-loop gain can amplify both offset and bias-related errors. Use short guarded input routes where practical, maintain a suitable return path, and confirm the required compensation method before increasing gain or adding capacitive loading.

The most common failure mode in a replacement is assuming that any one-circuit JFET operational amplifier is interchangeable with the AD506KH. Validate the footprint, terminal functions, supply limits, offset voltage, gain-bandwidth product, bias current, output capability, compensation requirements, and temperature grade. Also account for the MSL 3 classification and its 168-hour floor life, especially when parts have been stored for an extended period before assembly.

コンプライアンス情報

RoHS
Non Compliant
REACH
Non Compliant
AEC-Q100
Not Qualified
鉛フリー
Unknown
ハロゲンフリー
Unknown
紛争鉱物
Unknown

The product listings identify the AD506KH as RoHS non-compliant, REACH affected, and not qualified. Lead-free, halogen-free, and conflict-minerals declarations are not identified.

データ検証日: 2026-11-17 — データはXAIPARTの部品エンジニアリングチームによって検証・管理されています

関連検索

AD506KH datasheet AD506KH pinout AD506KH datasheet pdf AD506KH TO-99-8 amplifier AD506KH equivalent AD506KH replacement AD506KH cross reference AD506KH price AD506KH stock Analog Devices AD506KH AD506KH JFET amplifier AD506KH offset voltage

関連部品&用語

Analog Devices AD506KH JFET-input operational amplifier operational amplifier analog amplifier integrated circuit semiconductor TO-99-8 TO-99 metal can 8-terminal through-hole package single-circuit amplifier input offset voltage 1500 µV maximum offset voltage high-impedance instrumentation signal conditioning non-inverting amplifier inverting amplifier sensor interface commercial temperature grade MSL 3 RoHS REACH AEC-Q100 analog-to-digital converter
クイック見積RFQ
詳細をすべてご記入ください — 営業チームが24時間以内にご返信いたします
部品番号 メーカー パッケージ QTY 目標価格 小計
✓
見積を送信しました!

24時間以内にメールでご返信いたします

1
RFQ送信済み
2
見積受領
3
注文済み
4
お支払い
5
発送済み
6
配達済み
RFQの詳細を表示