AD521KD - Low-Drift Instrumentation Amplifier | Analog Devices
部品番号: AD521KD ✗ 生産終了AD521KD 概要
An instrumentation amplifier is a specialized analog signal-conditioning IC designed for low-level differential measurements. Its internal gain stage rejects common-mode interference, improves input impedance, and simplifies accurate gain setting compared with a discrete operational-amplifier network. The AD521 belongs to the instrumentation-amplifier hierarchy within precision analog and mixed-signal semiconductors.
The AD521KD is differentiated by its K-grade low-drift classification, 1500 uV maximum offset voltage, and 2 MHz bandwidth. These characteristics suit applications where sensor outputs are small, source impedances may differ, and common-mode voltage can be much larger than the wanted differential signal. The 0 to +70°C grade range supports commercial and industrial equipment operating without extended-temperature requirements.
Analog Devices describes the AD521 as a monolithic, economical precision instrumentation amplifier. Its differential inputs and programmable gain provide a practical signal path for bridge outputs, pressure transducers, thermocouple interfaces, biomedical instrumentation, and industrial sensor monitoring. The manufacturer datasheet specifically distinguishes the instrumentation amplifier from a general-purpose operational amplifier, emphasizing its integrated differential and gain functions.
Typical uses include low-level strain-gauge measurement, position sensing, current-loop instrumentation, and laboratory signal acquisition. The 2 MHz bandwidth supports signals extending well above conventional slow industrial transducer rates, while maximum supply current of 5 mA supports compact multi-channel acquisition systems where power and board area are constrained.
When designing around the AD521KD, verify the external gain-resistor network against the manufacturer gain table and maintain adequate common-mode and output-voltage headroom. Ceramic-DIP construction should also be considered for mechanical protection, soldering requirements, and temperature-rise effects in the final assembly. The complete electrical limits and pin descriptions should be taken from the Analog Devices AD521 data sheet.
This page combines manufacturer specifications, packaging details, application guidance, replacement constraints, and design-focused comparisons for engineers evaluating the AD521KD. It also distinguishes true pin-compatible alternatives from functionally similar but non-drop-in amplifier options, helping PCB reuse decisions remain technically defensible.
ドロップイン代替品: AD521KD — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: AD521KD (同一形状・フットプリント) — 相違点: Temperature Grade, Package, Product Type, Mounting Type, Gain.
AD521JDZ
✅ ドロップイン ⚠️ 仕様未検証価格はお問い合わせください
データシートを見る →AD521LDZ
✅ ドロップイン ⚠️ 仕様未検証価格はお問い合わせください
データシートを見る →AD521SD
✅ ドロップイン ⚠️ 仕様未検証価格はお問い合わせください
データシートを見る →AD521KDZ
✅ ドロップイン価格はお問い合わせください
データシートを見る →AD521KZ
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品(カタログ未掲載)
AD521KD 最大定格&電気的特性
| Product Type | Precision instrumentation amplifier |
| Manufacturer | Analog Devices |
| Amplifier Circuit Count | 1 circuit |
| パッケージ | 14-pin ceramic DIP |
| Grade | K grade, low drift |
| Input Offset Voltage | 1500 uV maximum |
| Bandwidth | 2 MHz |
| Maximum Supply Current | 5 mA |
| Nominal Supply Voltage | 15 V |
| Negative Supply Voltage | -15 V |
| 動作温度範囲 | 0°C to +70°C |
| Input Configuration | Differential input |
| Gain | Accurately programmable |
| Temperature Grade | 0°C to +70°C for K grade |
| 実装タイプ | Through-hole ceramic DIP |
AD521KD 14-pin ceramic dip ピン配置ガイド
AD521KD (14-pin ceramic dip パッケージ) のピン配置。 このアナログコンポーネントは、入力、出力、および電源ピンを備えています。オフセットナル、補償、イネーブルピンの設定については、メーカーのデータシートを参照してください。信号調整やアンプ回路に最適です。
詳細なピン配置データはありません: AD521KD.
詳細は データシート をご参照ください。
主な用途
AD521KD の用途: 6 件s: Strain-Gauge Bridge Measurement, Pressure Transducer Interface, Industrial Sensor Acquisition, Biomedical Instrument Signal Conditioning, Laboratory Measurement Front End, Current and Voltage Loop Sensing.
Strain-Gauge Bridge Measurement
The AD521KD fits low-level bridge outputs because its differential input structure measures the difference between bridge excitation and sensed voltage while rejecting common-mode error. Its 1500 uV maximum input offset voltage establishes the baseline error for the K grade, while 2 MHz bandwidth supports measurements beyond very slow static-transducer rates. In a practical bridge circuit, the gain network must follow the AD521 data-sheet equations, and the excitation reference must remain within the amplifier’s input and output common-mode limits. Compared with a discrete three-op-amp design, the monolithic instrumentation amplifier reduces resistor-count and gain-matching complexity while preserving a defined gain relationship.
おすすめ
Pressure Transducer Interface
The AD521KD provides the differential gain and programmable scaling needed for piezoresistive pressure sensors. A typical design excites the sensor bridge, routes the differential sensor output into the amplifier inputs, and selects gain to maximize usable converter range. The AD521KD’s 1500 uV maximum input offset voltage is important when the full-scale sensor voltage is small, while its 2 MHz bandwidth permits dynamic pressure signals to pass with less bandwidth limitation than a slow bridge amplifier. The design must still verify common-mode range, output swing, supply polarity, and gain-resistor tolerances.
おすすめ
Industrial Sensor Acquisition
The AD521KD is appropriate for industrial acquisition systems that condition low-level differential sensor outputs before sampling. Its differential inputs reduce sensitivity to common-mode disturbance, and its programmable gain allows one instrumentation-amplifier topology to cover sensors with different output sensitivities. The 2 MHz bandwidth is ample for many sensor and telemetry signals, while the 5 mA maximum supply current supports power-conscious multi-channel equipment. A production design should check input bias current effects, source-impedance balance, allowable common-mode voltage, and the temperature drift expected from the K grade over 0°C to +70°C.
おすすめ
Biomedical Instrument Signal Conditioning
The AD521KD can condition small differential signals in biomedical instrumentation when its input offset, noise, common-mode range, and safety requirements are acceptable for the intended circuit. Its 1500 uV maximum input offset voltage and 2 MHz bandwidth make it a practical choice for physiological signal paths that require amplification before filtering or conversion. The single instrumentation-amplifier architecture is especially useful where source impedance and common-mode behavior are well matched. Medical designs must additionally evaluate patient protection, isolation, leakage current, electromagnetic interference, and applicable regulatory requirements; those safety functions are not implied by the AD521KD itself.
おすすめ
Laboratory Measurement Front End
The AD521KD serves as a front end for laboratory instruments that measure small differential voltages while rejecting significant common-mode voltage. The 2 MHz bandwidth supports a broad class of low-level waveform and sensor measurements, and programmable gain simplifies front-panel range selection when combined with suitable switching and resistor networks. Designers should use the manufacturer gain table rather than estimating gain solely from a resistor ratio, and should verify that output swing remains valid for the selected gain. The K-grade maximum offset of 1500 uV is also relevant when establishing measurement resolution and calibration uncertainty.
おすすめ
Current and Voltage Loop Sensing
The AD521KD can amplify differential voltage drops in precision current-measurement or process-control loops. A shunt or sensor produces a small differential voltage, and the instrumentation amplifier rejects the larger common-mode voltage present on the line before further processing. Its 1500 uV maximum input offset voltage contributes to the total loop error, while the 2 MHz bandwidth allows the signal path to handle faster transients than a static measurement amplifier. For process-control equipment, verify input protection, common-mode limits, output swing, isolation boundaries, and the required update bandwidth before finalizing the component choice.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: AD521KD — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | AD521JD | AD521LD | AD521SD | AD521KDZ | AD521KZ |
|---|---|---|---|---|---|---|
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Package | 14-pin ceramic DIP | 14-pin ceramic DIP | 14-pin ceramic DIP | 14-pin ceramic DIP | 14-CDIP | 14-pin ceramic DIP |
| Grade | K grade, low drift | J grade, economical | L grade, lower drift and high linearity | S grade, extended temperature | K grade, low drift | J grade, economical |
| Input Configuration | Differential input | Differential input | Differential input | Differential input | Differential input | Differential input |
| Gain | Accurately programmable | Accurately programmable | Accurately programmable | Accurately programmable | Accurately programmable | Accurately programmable |
| Amplifier Circuit Count | 1 circuit | 1 circuit | 1 circuit | 1 circuit | 1 circuit | 1 circuit |
主な差別化要因
- Low-drift K-grade selection (vs AD521JD)
- Lower drift and higher linearity than the K grade (vs AD521LD)
- Extended-temperature grade option (vs AD521SD)
- Same-footprint K-grade ordering option (vs AD521KDZ)
設計ノート
Do not select the AD521KD solely by its 2 MHz bandwidth. Confirm that the selected gain, supply voltages, source impedances, and external gain resistors keep both differential inputs inside the common-mode range and leave sufficient output swing. The 1500 uV maximum input offset voltage also means that gain and sensor sensitivity must be considered together; offset error referred to the input becomes a larger error after multiplication by the selected gain.
Use the manufacturer gain-setting method and recommended resistor values for the intended gain. Keep differential input traces short, symmetrical, and away from switching nodes and high-current return paths. Because the AD521KD is a through-hole ceramic-DIP device, pay particular attention to insertion cleanliness, socket or solder-joint mechanical strength, and lead clearance when planning assembly and rework.
Estimated: with +15 V and −15 V supplies, a supply current of 5 mA corresponds to approximately 150 mW total power dissipation when both rail currents are 5 mA. Use P = (15 V × 5 mA) + (15 V × 5 mA). Actual rail current may differ with operating state, and final thermal verification must use the maximum expected supply current and ceramic-DIP thermal behavior in the assembled system.
Balance source impedances and follow the manufacturer’s gain-resistor recommendations. Unequal source resistance can interact with input bias current to create additional differential error, while long input routes can admit interference before the amplifier’s common-mode rejection acts. For low-level measurements, provide a stable reference return and verify the sensor excitation against the resulting input and output common-mode limits.
コンプライアンス情報
Compliance declarations were not identified for this exact MPN. AEC-Q100 is not applicable because the AD521KD is an analog instrumentation amplifier rather than an automotive-qualified device.