Analog Devices

AD521KD - Low-Drift Instrumentation Amplifier | Analog Devices

MPN: AD521KD ✗ Cuối đời
1500 uV maximum Vdss 5 mA Id 14-pin ceramic DIP Package
MOQ: 1 |

AD521KD Tóm tắt

Analog Devices AD521KD is a precision instrumentation amplifier packaged in a 14-pin ceramic DIP. It provides one amplifier circuit with a 1500 uV maximum input offset voltage, a 2 MHz bandwidth, and operation over a 0 to +70°C temperature range for the low-drift K grade. The device accepts differential input signals and supports accurately programmable gain.

An instrumentation amplifier is a specialized analog signal-conditioning IC designed for low-level differential measurements. Its internal gain stage rejects common-mode interference, improves input impedance, and simplifies accurate gain setting compared with a discrete operational-amplifier network. The AD521 belongs to the instrumentation-amplifier hierarchy within precision analog and mixed-signal semiconductors.

The AD521KD is differentiated by its K-grade low-drift classification, 1500 uV maximum offset voltage, and 2 MHz bandwidth. These characteristics suit applications where sensor outputs are small, source impedances may differ, and common-mode voltage can be much larger than the wanted differential signal. The 0 to +70°C grade range supports commercial and industrial equipment operating without extended-temperature requirements.

Analog Devices describes the AD521 as a monolithic, economical precision instrumentation amplifier. Its differential inputs and programmable gain provide a practical signal path for bridge outputs, pressure transducers, thermocouple interfaces, biomedical instrumentation, and industrial sensor monitoring. The manufacturer datasheet specifically distinguishes the instrumentation amplifier from a general-purpose operational amplifier, emphasizing its integrated differential and gain functions.

Typical uses include low-level strain-gauge measurement, position sensing, current-loop instrumentation, and laboratory signal acquisition. The 2 MHz bandwidth supports signals extending well above conventional slow industrial transducer rates, while maximum supply current of 5 mA supports compact multi-channel acquisition systems where power and board area are constrained.

When designing around the AD521KD, verify the external gain-resistor network against the manufacturer gain table and maintain adequate common-mode and output-voltage headroom. Ceramic-DIP construction should also be considered for mechanical protection, soldering requirements, and temperature-rise effects in the final assembly. The complete electrical limits and pin descriptions should be taken from the Analog Devices AD521 data sheet.

This page combines manufacturer specifications, packaging details, application guidance, replacement constraints, and design-focused comparisons for engineers evaluating the AD521KD. It also distinguishes true pin-compatible alternatives from functionally similar but non-drop-in amplifier options, helping PCB reuse decisions remain technically defensible.

Bộ thay thế dễ dàng lắp đặt cho AD521KD — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.

Các biến thể trong loạt này

Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với AD521KD (cùng hình factor và footprint) — khác nhau ở Temperature Grade, Package, Product Type, Mounting Type, Gain.

Analog Devices
Temperature Grade: Commercial
Product Type: Instrumentation amplifier
So sánh với AD521KD →
Analog Devices
Temperature Grade: K grade, low drift
Package: 14-CDIP
Product Type: Monolithic instrumentation amplifier
So sánh với AD521KD →
Analog Devices
Temperature Grade: L grade
Package: 14-CDIP, 0.300 in (7.62 mm) pitch
Mounting Type: Through-hole
So sánh với AD521KD →
Analog Devices
Temperature Grade: S grade
Package: 14-pin ceramic DIP-style package
Product Type: Monolithic programmable instrumentation amplifier
So sánh với AD521KD →

AD521JDZ

✅ Drop-In ⚠️ Thông số chưa được xác minh
Analog Devices
📦 14-pin ceramic DIP
Instrumentation amplifier · 1 circuit · 14 terminals · 14-lead ceramic DIP (14-CDIP) · Through-hole · Rectangular · Commercial · 0°C to +70°C

Liên hệ để biết giá

Xem tài liệu →

AD521LDZ

✅ Drop-In ⚠️ Thông số chưa được xác minh
Analog Devices
📦 14-pin ceramic DIP
Monolithic instrumentation amplifier · 1 circuit · Up to 1000:1 · 110 dB minimum · 2 pV/°C maximum · 10 V/µs · L grade · 0°C to +70°C

Liên hệ để biết giá

Xem tài liệu →

AD521SD

✅ Drop-In ⚠️ Thông số chưa được xác minh
Analog Devices
📦 14-pin ceramic DIP
Monolithic programmable instrumentation amplifier · 1 circuit · 10 V · 36 V · 5 mA · -55°C to +125°C · S grade · 10 V/µs

Liên hệ để biết giá

Xem tài liệu →

AD521KDZ

✅ Drop-In
Analog Devices
📦 14-pin ceramic DIP
Monolithic instrumentation amplifier · 1 circuit · 14-CDIP · 14 pins · 40 MHz · External resistor · Differential input · Built in

Liên hệ để biết giá

Xem tài liệu →

AD521KZ

✅ Drop-In ⚠️ Thông số chưa được xác minh
📦 14-pin ceramic DIP
AD521KZ is the J-grade AD521 family member with a package suffix and economical rather than low-drift grade

📋 Tham chiếu thay thế (không có trong danh mục)

AD521KD Tỷ lệ tối đa & tính chất điện

Product Type Precision instrumentation amplifier
Manufacturer Analog Devices
Amplifier Circuit Count 1 circuit
Hộp 14-pin ceramic DIP
Grade K grade, low drift
Input Offset Voltage 1500 uV maximum
Bandwidth 2 MHz
Maximum Supply Current 5 mA
Nominal Supply Voltage 15 V
Negative Supply Voltage -15 V
Khoảng nhiệt độ hoạt động 0°C to +70°C
Input Configuration Differential input
Gain Accurately programmable
Temperature Grade 0°C to +70°C for K grade
Kiểu lắp đặt Through-hole ceramic DIP

Hướng dẫn cấu hình chân AD521KD 14-pin ceramic dip

Cấu hình chân cho AD521KD (14-pin ceramic dip gói). Thành phần số hiệu này có chân đầu vào, đầu ra và nguồn cung cấp. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết cấu hình chân bù, bù trừ và chân kích hoạt. Hoàn hảo cho điều kiện tín hiệu và mạch khuếch đại.

Bảng cấu hình chân 14-pin ceramic dip cho AD521KD

Không có dữ liệu chân cụ thể sẵn có cho AD521KD.

Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.

Ứng dụng tiêu biểu

AD521KD phù hợp cho 6 Áp dụngs: Strain-Gauge Bridge Measurement, Pressure Transducer Interface, Industrial Sensor Acquisition, Biomedical Instrument Signal Conditioning, Laboratory Measurement Front End, Current and Voltage Loop Sensing.

🏭

Strain-Gauge Bridge Measurement

The AD521KD fits low-level bridge outputs because its differential input structure measures the difference between bridge excitation and sensed voltage while rejecting common-mode error. Its 1500 uV maximum input offset voltage establishes the baseline error for the K grade, while 2 MHz bandwidth supports measurements beyond very slow static-transducer rates. In a practical bridge circuit, the gain network must follow the AD521 data-sheet equations, and the excitation reference must remain within the amplifier’s input and output common-mode limits. Compared with a discrete three-op-amp design, the monolithic instrumentation amplifier reduces resistor-count and gain-matching complexity while preserving a defined gain relationship.

⚡

Pressure Transducer Interface

The AD521KD provides the differential gain and programmable scaling needed for piezoresistive pressure sensors. A typical design excites the sensor bridge, routes the differential sensor output into the amplifier inputs, and selects gain to maximize usable converter range. The AD521KD’s 1500 uV maximum input offset voltage is important when the full-scale sensor voltage is small, while its 2 MHz bandwidth permits dynamic pressure signals to pass with less bandwidth limitation than a slow bridge amplifier. The design must still verify common-mode range, output swing, supply polarity, and gain-resistor tolerances.

🏭

Industrial Sensor Acquisition

The AD521KD is appropriate for industrial acquisition systems that condition low-level differential sensor outputs before sampling. Its differential inputs reduce sensitivity to common-mode disturbance, and its programmable gain allows one instrumentation-amplifier topology to cover sensors with different output sensitivities. The 2 MHz bandwidth is ample for many sensor and telemetry signals, while the 5 mA maximum supply current supports power-conscious multi-channel equipment. A production design should check input bias current effects, source-impedance balance, allowable common-mode voltage, and the temperature drift expected from the K grade over 0°C to +70°C.

💊

Biomedical Instrument Signal Conditioning

The AD521KD can condition small differential signals in biomedical instrumentation when its input offset, noise, common-mode range, and safety requirements are acceptable for the intended circuit. Its 1500 uV maximum input offset voltage and 2 MHz bandwidth make it a practical choice for physiological signal paths that require amplification before filtering or conversion. The single instrumentation-amplifier architecture is especially useful where source impedance and common-mode behavior are well matched. Medical designs must additionally evaluate patient protection, isolation, leakage current, electromagnetic interference, and applicable regulatory requirements; those safety functions are not implied by the AD521KD itself.

🖥️

Laboratory Measurement Front End

The AD521KD serves as a front end for laboratory instruments that measure small differential voltages while rejecting significant common-mode voltage. The 2 MHz bandwidth supports a broad class of low-level waveform and sensor measurements, and programmable gain simplifies front-panel range selection when combined with suitable switching and resistor networks. Designers should use the manufacturer gain table rather than estimating gain solely from a resistor ratio, and should verify that output swing remains valid for the selected gain. The K-grade maximum offset of 1500 uV is also relevant when establishing measurement resolution and calibration uncertainty.

🔧

Current and Voltage Loop Sensing

The AD521KD can amplify differential voltage drops in precision current-measurement or process-control loops. A shunt or sensor produces a small differential voltage, and the instrumentation amplifier rejects the larger common-mode voltage present on the line before further processing. Its 1500 uV maximum input offset voltage contributes to the total loop error, while the 2 MHz bandwidth allows the signal path to handle faster transients than a static measurement amplifier. For process-control equipment, verify input protection, common-mode limits, output swing, isolation boundaries, and the required update bandwidth before finalizing the component choice.

What is the AD521KD?
The AD521KD is a single-circuit precision instrumentation amplifier from Analog Devices. According to the AD521 manufacturer data sheet, it accepts differential inputs, provides accurately programmable gain, and is specified in a 14-pin ceramic DIP package. The K grade is a low-drift version intended for operation from 0°C to +70°C.
What is the bandwidth of the AD521KD?
The AD521KD has a 2 MHz bandwidth. This figure comes from the Analog Devices AD521 product information and distinguishes the part from slower instrumentation amplifiers intended primarily for temperature or strain-gauge signals. The usable bandwidth in a finished circuit also depends on the selected gain, source impedance, supply voltage, and external resistor network.
What is the input offset voltage of the AD521KD?
The AD521KD has a maximum input offset voltage of 1500 uV. Analog Devices classifies the K version as the low-drift grade, while the J version is described as economical and the L version as having lower drift and higher linearity. Offset and drift should both be considered when the source produces a signal close to the amplifier’s input range.
Where can I download the AD521KD datasheet PDF?
The official AD521KD data sheet can be downloaded from the Analog Devices document at https://www.analog.com/media/en/technical-documentation/data-sheets/AD521.pdf. The manufacturer document contains the electrical characteristics, gain equations, pin descriptions, and application information needed to design around the AD521 family.
Where can I find the AD521KD pinout?
Use the pin-description and package drawings in the official Analog Devices AD521 data sheet to assign the AD521KD connections. The AD521KD is a 14-pin ceramic DIP, but the exact pin names are not reproduced on this page because the manufacturer connection table was not available for structured transcription. Confirm every net against the data sheet before fabrication.
What is the AD521KD operating temperature range?
The AD521KD K grade is specified from 0°C to +70°C. The Analog Devices product page distinguishes this range from the S grade, which is guaranteed from −55°C to +125°C. Industrial equipment operating below 0°C or above +70°C should therefore use a part explicitly specified for the required ambient range.
What is the difference between an AD521KD and an AD521JD?
The AD521KD is the low-drift K grade, whereas the AD521JD is the economical J grade. Analog Devices specifies both grades from 0°C to +70°C, and the AD521 family shares the same 14-pin ceramic-DIP architecture. Choose the K grade when its lower-drift behavior is justified; choose the J grade when the application does not require that tighter grade.
When should I choose the AD521KD over the AD521LD?
Choose the AD521KD over the AD521LD when low drift is the priority and the additional precision of the L grade is unnecessary. Analog Devices describes AD521KD as the low-drift K grade and AD521LD as the lower-drift, higher-linearity L grade. The AD521LD is preferable for the most demanding precision applications, while AD521KD offers a lower-complexity precision choice.
Can the AD521LD replace the AD521KD?
The AD521LD can be considered a same-package replacement for the AD521KD when its electrical limits satisfy the original design. Both are AD521-family precision instrumentation amplifiers in the 14-pin ceramic DIP, and the L grade provides lower drift and higher linearity. Final equivalence still requires checking every minimum and maximum specification in the manufacturer data sheet.
What can replace the AD521KD?
The closest drop-in choices are grade and package variants of the AD521 family, including AD521JD, AD521LD, AD521SD, AD521KDZ, and AD521KZ. These candidates share the AD521 circuit and 14-pin ceramic-DIP footprint, but changes in drift, temperature range, or package suffix can affect qualification. No cross-brand pin-compatible replacement was identified in the available cross-reference results.
Is the AD521KD suitable for sensor and bridge measurements?
Yes, the AD521KD is suitable for low-level differential sensor measurements such as strain bridges, pressure transducers, and position sensors. Its differential inputs, programmable gain, 1500 uV maximum offset voltage, and 2 MHz bandwidth provide the basic signal-conditioning functions required for many industrial measurement systems.
What are the key specifications of the AD521KD that engineers should know?
The AD521KD combines a 1500 uV maximum input offset voltage, 2 MHz bandwidth, 5 mA maximum supply current, and operation from 0°C to +70°C in a 14-pin ceramic DIP. It is a one-circuit, differential-input instrumentation amplifier with programmable gain. These are the principal characteristics to compare against sensor sensitivity, source impedance, common-mode range, and system temperature requirements.
How much power does the AD521KD use?
The AD521KD has a maximum supply current of 5 mA, making its supply demand relatively low for a precision analog amplifier. Actual dissipation depends on the applied supply voltages and operating current. Because the part supports negative and positive rails in its intended dual-supply operation, power and ground-return calculations should use the actual rail voltages used in the final circuit.
Where can I buy the AD521KD?
Use the Request a Quote form on this page to request the AD521KD, current availability, minimum order quantity, and delivery information. The form connects the request with XAIPART’s quotation process and avoids publishing a static price that may not reflect the requested quantity, package code, or current component status.
What is the price and lead time for the AD521KD?
Submit the AD521KD request through the Request a Quote form on this page for current pricing, stock status, minimum order quantity, and lead time. The ceramic-DIP suffix and quantity affect the commercial offer, so engineers should request the exact AD521KD orderable MPN rather than relying on a generic family-level quote.

Dữ liệu tham khảo kỹ thuật cho AD521KD — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.

Hướng dẫn chọn lựa

Choose the AD521KD when a design needs a low-cost differential instrumentation amplifier with the low-drift K-grade classification, a 2 MHz bandwidth, and operation from 0°C to +70°C. Choose AD521JD when offset drift and linearity are less critical but the same package and general instrumentation-amplifier function are needed. Choose AD521LD when the design can benefit from lower drift and higher linearity. Choose AD521SD when environmental requirements extend to −55°C or +125°C. AD521KDZ and AD521KZ are useful same-family ordering options only after their orderable suffix specifications are confirmed. For new precision designs, compare input offset, drift, common-mode range, gain accuracy, noise, supply current, and every minimum or maximum specification—not only package compatibility. No cross-brand drop-in replacement is established here because the available cross-reference results did not identify a pin-compatible candidate.

So sánh với các sản phẩm thay thế

Tham số Sản phẩm này AD521JD AD521LD AD521SD AD521KDZ AD521KZ
Brand Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices
Package 14-pin ceramic DIP 14-pin ceramic DIP 14-pin ceramic DIP 14-pin ceramic DIP 14-CDIP 14-pin ceramic DIP
Grade K grade, low drift J grade, economical L grade, lower drift and high linearity S grade, extended temperature K grade, low drift J grade, economical
Input Configuration Differential input Differential input Differential input Differential input Differential input Differential input
Gain Accurately programmable Accurately programmable Accurately programmable Accurately programmable Accurately programmable Accurately programmable
Amplifier Circuit Count 1 circuit 1 circuit 1 circuit 1 circuit 1 circuit 1 circuit

Bảo phân biệt quan trọng

  • Low-drift K-grade selection (vsAD521JD)
  • Lower drift and higher linearity than the K grade (vsAD521LD)
  • Extended-temperature grade option (vsAD521SD)
  • Same-footprint K-grade ordering option (vsAD521KDZ)

Ghi chú thiết kế

Do not select the AD521KD solely by its 2 MHz bandwidth. Confirm that the selected gain, supply voltages, source impedances, and external gain resistors keep both differential inputs inside the common-mode range and leave sufficient output swing. The 1500 uV maximum input offset voltage also means that gain and sensor sensitivity must be considered together; offset error referred to the input becomes a larger error after multiplication by the selected gain.

Use the manufacturer gain-setting method and recommended resistor values for the intended gain. Keep differential input traces short, symmetrical, and away from switching nodes and high-current return paths. Because the AD521KD is a through-hole ceramic-DIP device, pay particular attention to insertion cleanliness, socket or solder-joint mechanical strength, and lead clearance when planning assembly and rework.

Estimated: with +15 V and −15 V supplies, a supply current of 5 mA corresponds to approximately 150 mW total power dissipation when both rail currents are 5 mA. Use P = (15 V × 5 mA) + (15 V × 5 mA). Actual rail current may differ with operating state, and final thermal verification must use the maximum expected supply current and ceramic-DIP thermal behavior in the assembled system.

Balance source impedances and follow the manufacturer’s gain-resistor recommendations. Unequal source resistance can interact with input bias current to create additional differential error, while long input routes can admit interference before the amplifier’s common-mode rejection acts. For low-level measurements, provide a stable reference return and verify the sensor excitation against the resulting input and output common-mode limits.

Thông tin tuân thủ

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Không chì
Unknown
Không halogen
Unknown
Khoáng vật xung đột
Unknown

Compliance declarations were not identified for this exact MPN. AEC-Q100 is not applicable because the AD521KD is an analog instrumentation amplifier rather than an automotive-qualified device.

Dữ liệu được xác minh vào: 2026-11-18 — dữ liệu được xác minh và quản lý bởi đội ngũ kỹ thuật phần cứng của XAIPART

Tìm kiếm liên quan

AD521KD datasheet AD521KD datasheet pdf AD521KD pinout AD521KD specifications AD521KD application circuit AD521KD replacement AD521KD equivalent AD521KD vs AD521LD AD521KD price AD521KD stock Analog Devices AD521KD AD521KD instrumentation amplifier

Các bộ phận và thuật ngữ liên quan

Analog Devices AD521KD AD521JD AD521LD AD521SD AD521KDZ AD521KZ precision instrumentation amplifier instrumentation amplifier differential amplifier signal-conditioning IC precision analog semiconductor mixed-signal semiconductor 14-pin ceramic DIP through-hole package low-drift K grade input offset voltage bandwidth common-mode rejection programmable gain strain-gauge bridge pressure transducer industrial sensor acquisition biomedical instrumentation
Báo giá nhanh RFQ
Hãy điền đầy đủ thông tin — đội ngũ bán hàng của chúng tôi sẽ phản hồi trong vòng 24 giờ
Mã sản phẩm Nhà sản xuất Kiểu đóng gói QTY Giá mục tiêu Phụ
✓
Báo giá đã gửi!

Chúng tôi sẽ trả lời email của bạn trong vòng 24 giờ

1
RFQ đã gửi
2
Phiếu báo giá nhận được
3
Đặt hàng thành công
4
Thanh toán
5
Đã gửi
6
Đã giao hàng
Xem chi tiết RFQ