AD6654CBC - 14-Bit, 92.16 MSPS IF Receiver | Analog Devices
部品番号: AD6654CBC ✗ 生産終了AD6654CBC 概要
An IF-to-baseband receiver is a mixed-signal integrated circuit that converts an analog intermediate-frequency signal into digital data and then reduces or filters that data into lower-frequency channels. Within the signal-chain hierarchy, it combines an ADC, a digital down-converter, programmable signal processing, and a high-density ball-grid-array package. This integration is useful when multiple receive channels must be digitized without requiring a separate ADC and digital processing assembly for each path.
The AD6654CBC provides 14-bit conversion resolution, a 92.16 MSPS conversion rate, and four or six digital down-converter channels. Its multimode DDC can process as many as six WCDMA channels, making the device suitable for multichannel receivers that require coherent sampling and programmable digital channelization. The manufacturer identifies the AD6654 as not recommended for new designs, so engineers should assess lifecycle continuity carefully before beginning a long-lived platform.
The product family combines a high-speed sampling stage with digital channel-selection functions. The six-channel device is the primary focus of the manufacturer documentation. On the four-channel version, Channels 4 and 5 are unavailable, while the underlying 14-bit, 92.16 MSPS ADC architecture remains part of the AD6654 family. This distinction is important when allocating digital resources or planning receiver configurations.
Typical uses include WCDMA receiver infrastructure, multi-channel IF digitization, communications test equipment, and baseband processing platforms. The ADC converts the analog IF input into parallel digital samples, while the DDC performs frequency translation and filtering to produce lower-rate channel data. Integrating these functions can reduce the number of separate conversion and digital-processing stages required in a multichannel system.
Board design should prioritize short, controlled analog-input routes, stable supply and reference distribution, and careful treatment of high-speed digital outputs. The 256-ball CSPBGA requires a dense multilayer PCB with via-in-pad structures or equivalent escape routing, adequate thermal management, and assembly-process support for the selected package. Designers should use the manufacturer pin-description table when assigning every ball and power domain.
This product page combines the known converter and channelization specifications with practical implementation guidance, lifecycle context, package-aware comparisons, and engineering-oriented replacement analysis. It focuses on the decisions that affect receiver architecture, PCB implementation, signal integrity, and supply planning.
ドロップイン代替品: AD6654CBC — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
AD6654CBCZ
✅ ドロップイン📋 参考代替品(カタログ未掲載)
AD6654CBC 最大定格&電気的特性
| Product Type | Mixed-signal IF-to-baseband receiver |
| ADC Resolution | 14 bit |
| Maximum Sampling Rate | 92.16 MSPS |
| Digital Down-Converter Channels | 4 or 6 channels |
| Maximum WCDMA Channels | 6 channels |
| Digital Processing Mode | Multimode |
| Input Signal Type | Analog intermediate-frequency signal |
| Output Signal Type | Digital baseband data |
| パッケージ | 256-CSPBGA, 17 mm x 17 mm |
| 実装タイプ | Surface mount |
| Lifecycle Recommendation | Not recommended for new designs |
| RoHS ステータス | unknown |
| REACH Status | unknown |
AD6654CBC 256-cspbga, 17 mm x 17 mm ピン配置ガイド
AD6654CBC (256-cspbga, 17 mm x 17 mm パッケージ) のピン配置。 このアナログコンポーネントは、入力、出力、および電源ピンを備えています。オフセットナル、補償、イネーブルピンの設定については、メーカーのデータシートを参照してください。信号調整やアンプ回路に最適です。
詳細なピン配置データはありません: AD6654CBC.
詳細は データシート をご参照ください。
主な用途
AD6654CBC の用途: 3 件s: 信号コンディショニング, データ収集, オーディオ処理.
信号コンディショニング
AD6654CBCを使用したセンサー信号の増幅とフィルタリング。
データ収集
AD6654CBCによるデジタル処理用のアナログ信号変換。
オーディオ処理
AD6654CBCによるオーディオ信号の増幅と処理。
エンジニアリング参考データ: AD6654CBC — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | AD6654CBCZ |
|---|---|---|
| Brand | Analog Devices | Analog Devices |
| Package | 256-CSPBGA (17x17) | 256-CSPBGA (17x17) |
| ADC Resolution | 14 bit | 14 bit |
| Maximum Sampling Rate | 92.16 MSPS | 92.16 MSPS |
| Digital Down-Converter Channels | 4 or 6 channels | 4 or 6 channels |
| Maximum WCDMA Channels | 6 channels | 6 channels |
| Digital Processing | Multimode DDC | Multimode DDC |
| Signal Conversion | Analog IF to digital baseband | Analog IF to digital baseband |
主な差別化要因
- Integrated multichannel conversion and digital down-conversion (vs AD6654CBCZ)
- Same 256-CSPBGA footprint for board reuse (vs AD6654CBCZ)
- Direct multichannel WCDMA receiver integration (vs AD6654CBCZ)
設計ノート
Implement the 256-CSPBGA footprint on a multilayer PCB with short ball escapes, via-in-pad or equivalent transition structures, and an uninterrupted return path beneath the device. Separate analog, clock, digital, and supply distribution as far as the package and board stack-up permit. Confirm the manufacturer land pattern, solder-mask policy, assembly stencil, and reflow profile with the exact package drawing before releasing fabrication data.
Route the 92.16 MSPS analog input and digital outputs as controlled-impedance nets, with the board-stack-up impedance selected from actual trace geometry and dielectric properties. Keep the analog input path short, avoid stubs and test-point discontinuities, and place any required input network close to the relevant balls. Use the manufacturer's clock, analog-input, and digital-output interface guidance to define return paths and prevent crosstalk into the sampling stage.
Build the supply and reference distribution around the voltage, current, sequencing, and decoupling requirements listed in the AD6654 datasheet. Provide local bulk and high-frequency decoupling at the associated package balls, keep return currents continuous, and isolate noisy switching paths from the analog and clock domains. Before layout release, confirm the exact pin-specific supply requirements and recommended capacitor networks in the manufacturer pin table and application schematics.
コンプライアンス情報
No specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration was identified for the exact AD6654CBC ordering code.