AD6654CBC - 14-Bit, 92.16 MSPS IF Receiver | Analog Devices
料号: AD6654CBC ✗ 停产AD6654CBC 概述
An IF-to-baseband receiver is a mixed-signal integrated circuit that converts an analog intermediate-frequency signal into digital data and then reduces or filters that data into lower-frequency channels. Within the signal-chain hierarchy, it combines an ADC, a digital down-converter, programmable signal processing, and a high-density ball-grid-array package. This integration is useful when multiple receive channels must be digitized without requiring a separate ADC and digital processing assembly for each path.
The AD6654CBC provides 14-bit conversion resolution, a 92.16 MSPS conversion rate, and four or six digital down-converter channels. Its multimode DDC can process as many as six WCDMA channels, making the device suitable for multichannel receivers that require coherent sampling and programmable digital channelization. The manufacturer identifies the AD6654 as not recommended for new designs, so engineers should assess lifecycle continuity carefully before beginning a long-lived platform.
The product family combines a high-speed sampling stage with digital channel-selection functions. The six-channel device is the primary focus of the manufacturer documentation. On the four-channel version, Channels 4 and 5 are unavailable, while the underlying 14-bit, 92.16 MSPS ADC architecture remains part of the AD6654 family. This distinction is important when allocating digital resources or planning receiver configurations.
Typical uses include WCDMA receiver infrastructure, multi-channel IF digitization, communications test equipment, and baseband processing platforms. The ADC converts the analog IF input into parallel digital samples, while the DDC performs frequency translation and filtering to produce lower-rate channel data. Integrating these functions can reduce the number of separate conversion and digital-processing stages required in a multichannel system.
Board design should prioritize short, controlled analog-input routes, stable supply and reference distribution, and careful treatment of high-speed digital outputs. The 256-ball CSPBGA requires a dense multilayer PCB with via-in-pad structures or equivalent escape routing, adequate thermal management, and assembly-process support for the selected package. Designers should use the manufacturer pin-description table when assigning every ball and power domain.
This product page combines the known converter and channelization specifications with practical implementation guidance, lifecycle context, package-aware comparisons, and engineering-oriented replacement analysis. It focuses on the decisions that affect receiver architecture, PCB implementation, signal integrity, and supply planning.
直接替换替代料: AD6654CBC ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
AD6654CBCZ
✅ 直接替换📋 参考替代料(不在目录中)
AD6654CBC 最大额定值与电气特性
| Product Type | Mixed-signal IF-to-baseband receiver |
| ADC Resolution | 14 bit |
| Maximum Sampling Rate | 92.16 MSPS |
| Digital Down-Converter Channels | 4 or 6 channels |
| Maximum WCDMA Channels | 6 channels |
| Digital Processing Mode | Multimode |
| Input Signal Type | Analog intermediate-frequency signal |
| Output Signal Type | Digital baseband data |
| 封装 | 256-CSPBGA, 17 mm x 17 mm |
| 安装类型 | Surface mount |
| Lifecycle Recommendation | Not recommended for new designs |
| RoHS 状态 | unknown |
| REACH Status | unknown |
AD6654CBC 256-cspbga, 17 mm x 17 mm 引脚配置指南
AD6654CBC(256-cspbga, 17 mm x 17 mm 封装)的引脚配置。 该模拟元件具有输入、输出和电源引脚。请参阅制造商数据手册以了解失调调零、补偿和使能引脚配置。适用于信号调理和放大器电路。
暂无详细引脚数据: AD6654CBC.
请参阅 数据手册 以查看完整引脚配置。
典型应用
AD6654CBC 适用于 3 应用s: 信号调理, 数据采集, 音频处理.
信号调理
使用 AD6654CBC 放大和滤波传感器信号。
数据采集
使用 AD6654CBC 将模拟信号转换为数字信号进行处理。
音频处理
使用 AD6654CBC 进行音频信号放大和处理。
工程参考数据: AD6654CBC ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | AD6654CBCZ |
|---|---|---|
| Brand | Analog Devices | Analog Devices |
| Package | 256-CSPBGA (17x17) | 256-CSPBGA (17x17) |
| ADC Resolution | 14 bit | 14 bit |
| Maximum Sampling Rate | 92.16 MSPS | 92.16 MSPS |
| Digital Down-Converter Channels | 4 or 6 channels | 4 or 6 channels |
| Maximum WCDMA Channels | 6 channels | 6 channels |
| Digital Processing | Multimode DDC | Multimode DDC |
| Signal Conversion | Analog IF to digital baseband | Analog IF to digital baseband |
关键差异点
- Integrated multichannel conversion and digital down-conversion (对比 AD6654CBCZ)
- Same 256-CSPBGA footprint for board reuse (对比 AD6654CBCZ)
- Direct multichannel WCDMA receiver integration (对比 AD6654CBCZ)
设计说明
Implement the 256-CSPBGA footprint on a multilayer PCB with short ball escapes, via-in-pad or equivalent transition structures, and an uninterrupted return path beneath the device. Separate analog, clock, digital, and supply distribution as far as the package and board stack-up permit. Confirm the manufacturer land pattern, solder-mask policy, assembly stencil, and reflow profile with the exact package drawing before releasing fabrication data.
Route the 92.16 MSPS analog input and digital outputs as controlled-impedance nets, with the board-stack-up impedance selected from actual trace geometry and dielectric properties. Keep the analog input path short, avoid stubs and test-point discontinuities, and place any required input network close to the relevant balls. Use the manufacturer's clock, analog-input, and digital-output interface guidance to define return paths and prevent crosstalk into the sampling stage.
Build the supply and reference distribution around the voltage, current, sequencing, and decoupling requirements listed in the AD6654 datasheet. Provide local bulk and high-frequency decoupling at the associated package balls, keep return currents continuous, and isolate noisy switching paths from the analog and clock domains. Before layout release, confirm the exact pin-specific supply requirements and recommended capacitor networks in the manufacturer pin table and application schematics.
合规信息
No specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration was identified for the exact AD6654CBC ordering code.