Analog Devices

AD707TQ - 15uV Max Offset Precision Op Amp | Analog Devices

部品番号: AD707TQ ✓ 生産中
Less than 15 uV Vdss 1.0 nA Id 8-pin CDIP, hermetically sealed ceramic Package
MOQ: 1 |

AD707TQ 概要

The Analog Devices AD707TQ is a low-cost, high-precision bipolar operational amplifier with less than 15 uV maximum input offset voltage, a maximum input offset current of 1.0 nA, and a 0.9 MHz gain-bandwidth product. It is offered in an 8-pin CDIP package with a hermetically sealed ceramic construction for applications where precision, stability, and environmental robustness are important.

An operational amplifier is a voltage-gain element used throughout analog signal chains. It can amplify sensor outputs, buffer high-impedance sources, support active filters, and perform error amplification in feedback-control systems. The AD707 belongs to the operational-amplifier hierarchy, where precision amplifiers are selected for low offset voltage, low bias current, low drift, and predictable behavior across changing temperatures. The AD707 is designed for instrumentation, industrial measurement, and precision signal-conditioning systems.

The AD707's defining performance begins with its maximum offset voltage of less than 15 uV. Analog Devices identifies the top grade as the first bipolar monolithic operational amplifier to offer a maximum offset-voltage drift of 0.1 uV/°C. Its maximum input offset current is 1.0 nA, which is especially useful when the source impedance is high or source leakage would otherwise create measurement error. The 0.9 MHz bandwidth makes it appropriate for instrumentation rather than high-speed signal processing.

Internally, the AD707 is a bipolar precision amplifier combining low-offset architecture with direct-coupled operation. Its electrical performance supports closed-loop gains where offset error must remain small relative to the measured signal. Designers should still account for bias-current error, input bias noise, common-mode limits, supply headroom, and the finite bandwidth when calculating practical measurement accuracy.

Typical uses include precision current-to-voltage conversion, low-level sensor amplification, bridge-signal conditioning, laboratory instrumentation, and feedback control in industrial systems. The 8-pin CDIP format can also suit high-reliability or temperature-controlled assemblies where a hermetically sealed package is preferred over a molded plastic package. Its low offset makes it useful when the measurement spans only a small voltage range close to the zero point.

For best results, place the amplifier close to sensitive input nodes, use low-leakage protection components, and avoid source impedances that make input-bias-current error excessive. Power-supply bypassing and careful grounding remain essential because the amplifier cannot correct noise already introduced by the input network. Confirm the operating voltage, temperature limits, and electrical limits against the manufacturer datasheet before finalizing a high-reliability design.

This product page combines manufacturer specifications, package information, pricing structure, and precision-amplifier design guidance to support component selection and board-level implementation. It also provides application-focused explanations and a transparent comparison with the screened AD707TQ/883B option for engineers evaluating legacy or controlled procurement requirements.

ドロップイン代替品: AD707TQ — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。

AD707TQ/883B

✅ ドロップイン
📦 CDIP-8
Screened ordering designation; core offset voltage remains below 15 uV and bandwidth remains 0.9 MHz

📋 参考代替品(カタログ未掲載)

AD707TQ 最大定格&電気的特性

Amplifier Type Single general-purpose operational amplifier
Architecture Bipolar monolithic
Maximum Input Offset Voltage Less than 15 uV
Maximum Input Offset Current 1.0 nA
Maximum Offset Voltage Drift 0.1 uV/°C for the top grade
Gain-Bandwidth Product 0.9 MHz
パッケージ 8-pin CDIP, hermetically sealed ceramic
ピン数 8 pins
実装タイプ Through-hole

AD707TQ 8-pin cdip, hermetically sealed ceramic ピン配置ガイド

AD707TQ (8-pin cdip, hermetically sealed ceramic パッケージ) のピン配置。 このアナログコンポーネントは、入力、出力、および電源ピンを備えています。オフセットナル、補償、イネーブルピンの設定については、メーカーのデータシートを参照してください。信号調整やアンプ回路に最適です。

AD707TQ の 8-pin cdip, hermetically sealed ceramic パッケージピン配置図

詳細なピン配置データはありません: AD707TQ.

詳細は データシート をご参照ください。

主な用途

AD707TQ の用途: 3 件s: 信号コンディショニング, データ収集, オーディオ処理.

📊

信号コンディショニング

AD707TQを使用したセンサー信号の増幅とフィルタリング。

📈

データ収集

AD707TQによるデジタル処理用のアナログ信号変換。

🎧

オーディオ処理

AD707TQによるオーディオ信号の増幅と処理。

What are the key specifications of AD707TQ that engineers should know?
The AD707TQ is a precision bipolar operational amplifier with less than 15 uV maximum input offset voltage, a maximum input offset current of 1.0 nA, and a 0.9 MHz gain-bandwidth product. According to the Analog Devices AD707 product page, the top grade also offers a maximum offset-voltage drift of 0.1 uV/°C. The device is packaged in an 8-pin hermetically sealed ceramic CDIP, making it suitable for precision instrumentation and controlled industrial environments.
What is the input offset voltage of AD707TQ?
The AD707TQ has a maximum input offset voltage of less than 15 uV. Analog Devices describes this as the best available offset-voltage specification for a bipolar operational amplifier at the time of the product announcement. Low offset is particularly important when amplifying low-level differential signals because the offset error is added directly to the measured result. The top-grade maximum offset-voltage drift is 0.1 uV/°C, according to the manufacturer product page.
What is the gain-bandwidth product of AD707TQ?
The AD707TQ has a 0.9 MHz gain-bandwidth product. This bandwidth supports precision and instrumentation applications operating below the high-speed range of modern CMOS amplifiers. The product listing identifies the AD707TQ as a general-purpose precision amplifier with a 0.9 MHz bandwidth. Closed-loop bandwidth will depend on the selected noise-gain configuration, feedback network, and operating conditions.
Where can I download the AD707TQ datasheet PDF?
The official AD707TQ documentation is available through the Analog Devices AD707 product page at https://www.analog.com/en/products/ad707.html. That page provides the manufacturer product information and links to the device documentation. The AD707TQ is the hermetically sealed 8-pin CDIP ordering option, so engineers should use the AD707 documentation together with the package and ordering information associated with the TQ suffix.
Where can I find the AD707TQ pinout?
The AD707TQ pinout is identified in the manufacturer AD707 documentation as an 8-pin CDIP configuration. Use the pin-description table in the Analog Devices AD707 datasheet before assigning PCB nets. The verified product listing confirms an 8-pin hermetically sealed ceramic package but does not reproduce individual terminal names, so consult the official drawing and connection diagram for exact signal, supply, and offset-null assignments.
What is the AD707TQ package type?
The AD707TQ is packaged in an 8-pin CDIP with a hermetically sealed ceramic construction. The manufacturer classifies it as a single general-purpose operational amplifier, and distributor product information identifies the package as CERDIP-8. This through-hole ceramic format differs from common molded SOIC and TSSOP packages, so PCB land patterns and assembly temperature profiles must be based on the CDIP drawing.
Is AD707TQ suitable for precision instrumentation?
The AD707TQ is suitable for precision instrumentation because its maximum input offset voltage is below 15 uV and its maximum input offset current is 1.0 nA. These characteristics reduce errors in low-level sensor and bridge measurements, while the 0.9 MHz bandwidth is appropriate for precision rather than high-speed signal chains. Its hermetically sealed ceramic CDIP also supports applications that value environmental sealing and long-term stability.
When should I choose AD707TQ over a general-purpose amplifier?
Choose the AD707TQ when measurement accuracy near zero, low offset current, or temperature stability matters more than wide bandwidth or low cost. Its maximum offset voltage is below 15 uV, and the top grade limits offset drift to 0.1 uV/°C. A general-purpose amplifier may be appropriate for ordinary signal conditioning, but it can introduce greater offset error in low-level, high-impedance, or precision-feedback applications.
What is the difference between AD707TQ and AD707TQ/883B?
Both are 8-pin hermetically sealed CDIP versions of the AD707 precision bipolar amplifier, and both use the less-than-15-uV offset-voltage and 0.9 MHz bandwidth performance described for the AD707 family. The AD707TQ/883B designation identifies a screened or controlled variant for special procurement requirements. Exact screening, temperature, and test details must be confirmed from its individual Analog Devices documentation before substituting it.
Can AD707TQ/883B replace AD707TQ?
AD707TQ/883B can be considered a same-package alternative when its documented operating limits and screening requirements satisfy the design. Both devices are identified as 8-pin CDIP operational amplifiers from the AD707 family, with the core offset and bandwidth specifications aligned. A production substitution should still verify enable or null-pin behavior, temperature grade, supply range, qualification details, and manufacturer ordering information.
What is the best drop-in replacement for AD707TQ?
The best documented drop-in candidate for AD707TQ is the Analog Devices AD707TQ/883B because it retains the AD707 family architecture, 8-pin hermetically sealed CDIP package, and closely aligned precision specifications. Its maximum offset voltage remains below 15 uV and its listed bandwidth remains 0.9 MHz. Verify the detailed ordering table, temperature limits, and screening requirements before approving the substitution.
Where can I buy AD707TQ online?
Use the Request a Quote form on this page to request AD707TQ availability, current pricing, and order handling. The request should include the required quantity, AD707TQ marking requirements, and any delivery constraints. Because availability for a hermetically sealed ceramic operational amplifier can depend on inventory and controlled sourcing, obtain a written quotation before committing the component to a production schedule.
What is the price of AD707TQ?
Current AD707TQ pricing is shown through the Request a Quote form on this page. The part is an 8-pin hermetically sealed ceramic CDIP precision amplifier, and its quotation may depend on quantity, marking, packaging, and supply status. Submit the required quantity and any inspection or traceability requirements with the request so the commercial response reflects the configuration you intend to purchase.
What is the lead time and stock status for AD707TQ?
Request the current AD707TQ stock status and lead time through the Request a Quote form on this page. The available commercial response should account for the exact AD707TQ ordering code and required quantity. Because no current inventory or lead-time figure is listed on the product page, obtain a time-bound quotation and availability confirmation before setting the component on a production schedule.
How should the AD707TQ be used in a precision signal-conditioning circuit?
Use the AD707TQ in a closed-loop configuration that keeps its less-than-15-uV offset contribution small relative to the target signal. Its 1.0 nA maximum input offset current limits errors from high source impedances, while the 0.9 MHz gain-bandwidth product suits moderate-speed instrumentation. Keep sensitive input traces short, use low-leakage protection components, and apply the power-supply and grounding recommendations from the manufacturer documentation.

エンジニアリング参考データ: AD707TQ — 比較、設計ガイダンス、コンプライアンス情報。

選定ガイド

Choose the AD707TQ when low-level precision, bipolar operation, and an 8-pin hermetically sealed CDIP package are central to the design. Its less-than-15-uV maximum offset voltage and 1.0 nA maximum offset current are most valuable in sensor, bridge, laboratory, and feedback applications where the measured signal is small. The 0.9 MHz bandwidth supports instrumentation and general analog signal conditioning rather than high-speed waveform processing. Consider AD707TQ/883B when the same AD707 family and CDIP footprint are needed but the documentation for its screening and procurement controls better matches the qualification plan. Because only one same-package family alternative was documented, do not approve a third-party substitute solely from similar headline specifications. Verify supply range, common-mode range, temperature grade, offset drift, offset-null implementation, and lifecycle requirements against the individual manufacturer documentation before making a drop-in change.

代替品との比較

パラメータ この製品 AD707TQ/883B
Brand Analog Devices Analog Devices
Package CDIP-8 CDIP-8
Function Single general-purpose precision operational amplifier Single precision operational amplifier
Architecture Bipolar monolithic Bipolar monolithic
Maximum Input Offset Voltage Less than 15 uV Less than 15 uV
Gain-Bandwidth Product 0.9 MHz 0.9 MHz
Circuit Count 1 circuit 1 circuit

主な差別化要因

  • Precision offset performance for low-level measurements (vs AD707TQ/883B)
  • Low input offset current supports higher source impedance (vs AD707TQ/883B)
  • Hermetically sealed ceramic construction for controlled assemblies (vs AD707TQ/883B)

設計ノート

Treat input-bias-current error as a source-impedance problem rather than only an amplifier specification. With a maximum input offset current of 1.0 nA, every 1 MΩ of source impedance can create approximately 1 uV of bias-related error. Use the AD707TQ with suitably low source impedances, or include offset-current compensation when the sensor or resistor network cannot be changed.

Route the amplifier inputs as short and guarded as practical, particularly when the AD707TQ is used with high-impedance sensors. Keep input nodes away from switching nodes and power-supply return currents. If a guard trace is used, it should be driven by a voltage near the input common-mode potential; otherwise the guard itself can alter input bias current and measurement accuracy.

Design the supply rails around the amplifier's documented operating range and verify output swing at the selected load. Because this is a bipolar precision amplifier, common-mode headroom and output-swing limits must be checked rather than assuming the input and output can reach the supply rails. Add local supply bypassing and keep ground returns short to minimize converted supply noise.

Estimate junction temperature from the actual power dissipation and the thermal resistance associated with the specific CDIP variant and PCB implementation. The 0.9 MHz bandwidth generally limits continuous high-frequency loading, but sustained output current or operation near the upper temperature limit can still raise device temperature. Confirm the applicable environmental limits and hermetic-package assembly requirements before production release.

コンプライアンス情報

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
鉛フリー
Unknown
ハロゲンフリー
Unknown
紛争鉱物
Unknown

The Analog Devices product information identifies a precision bipolar operational amplifier in an 8-pin hermetically sealed ceramic CDIP package, but it does not state the requested environmental compliance statuses.

データ検証日: 2026-11-14 — データはXAIPARTの部品エンジニアリングチームによって検証・管理されています

関連検索

AD707TQ datasheet AD707TQ datasheet pdf AD707TQ pinout AD707TQ specifications AD707TQ CDIP-8 package AD707TQ precision amplifier AD707TQ vs AD707TQ/883B AD707TQ drop-in replacement AD707TQ price AD707TQ stock Analog Devices AD707TQ AD707TQ instrumentation amplifier application

関連部品&用語

Analog Devices AD707TQ AD707TQ/883B AD707 precision operational amplifier operational amplifier analog amplifier IC bipolar monolithic operational amplifier low offset voltage input offset current offset voltage drift gain-bandwidth product CDIP-8 ceramic dual in-line package hermetically sealed package through-hole mounting precision instrumentation sensor signal conditioning bridge measurement active filter feedback control analog signal chain semiconductor
クイック見積RFQ
詳細をすべてご記入ください — 営業チームが24時間以内にご返信いたします
部品番号 メーカー パッケージ QTY 目標価格 小計
✓
見積を送信しました!

24時間以内にメールでご返信いたします

1
RFQ送信済み
2
見積受領
3
注文済み
4
お支払い
5
発送済み
6
配達済み
RFQの詳細を表示