AD7703AR - 20-Bit Sigma-Delta ADC, SOIC-20 | Analog Devices
部品番号: AD7703AR ✓ 生産中| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $42.17 | $42.17 |
| 10 | $40.06 | $400.60 |
| 100 | $38 | $3,800.00 |
| 500 | $36.1 | $18,050.00 |
| 1,000 | $34.3 | $34,300.00 |
AD7703AR 概要
A sigma-delta ADC is a type of oversampling converter that digitizes an analog input by integrating it at a very high sampling rate and then decimating the result with a digital filter. Within the data-conversion hierarchy, the AD7703 sits above general-purpose successive-approximation ADCs in resolution, trading conversion speed for extremely high precision, and belongs to Analog Devices' LC2MOS (linear-compatible CMOS) data-acquisition family.
Key features include 20-bit resolution with no missing codes, self-calibration and system calibration modes that remove offset and gain error, and a flexible serial interface that supports both internal and external clocking. Because the digital sinc filter shapes the noise floor, the device achieves effective performance that discrete multi-stage designs cannot match without extensive trimming.
The LC2MOS process combines precision analog circuitry with low-power CMOS logic on one die. All dynamic characteristics, including input sampling frequency, output data rate, filter response, and calibration time, scale directly with the master clock f_CLKIN, as stated in the Analog Devices AD7703 datasheet (Rev. F), allowing designers to trade speed against filter settling and noise.
Typical applications include precision transducer measurement (thermocouples, RTDs, load cells), weigh-scale front ends, industrial process-control data loggers, and instrumentation requiring resolution beyond 16 bits, where the sigma-delta architecture and on-chip calibration reduce external signal-conditioning complexity.
Design consideration: allow full settling time after any calibration or input step; the digital filter's long impulse response means a single conversion immediately after a transient does not reflect the new input value.
This page synthesizes distributor pricing, same-family drop-in grading alternatives, and practical design notes not consolidated in the manufacturer datasheet. Pricing and stock referenced as of 2026-10-11.
ドロップイン代替品: AD7703AR — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: AD7703AR （同一形状・フットプリント） — 相違点: Architecture, Calibration, Operating Temperature Range, Package, Resolution.
クイック比較ツール — 並列比較する代替部品を選択:
AD7703BR
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品（カタログ未掲載）
AD7703AR-REEL
✅ ドロップイン✓ 在庫あり
$27.2 / 個
データシートを見る →AD7703BN
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品（カタログ未掲載）
AD7703AR 最大定格＆電気的特性
| 分解能 | 20 bit |
| Number of Input Channels | 1 (differential) |
| Architecture | Sigma-Delta (Delta-Sigma) |
| Output Data Rate | up to 4 kSPS (nominal line rate per datasheet) |
| インターフェースタイプ | Serial |
| Reference Type | External |
| Calibration | Self-calibration and system calibration modes |
| Clocking | Internal or external master clock (f_CLKIN) |
| Process Technology | LC2MOS |
| パッケージ | 20-SOIC (wide body) |
| 実装タイプ | Surface Mount |
| 動作温度範囲 | -40C to +85C |
| Packaging | Tube |
| Sampling Rate Listing (distributor) | 16 kSPS (datasheets.com listing; see validation note) |
AD7703AR 20-soic (wide body) ピン配置ガイド
AD7703AR (20-soic (wide body) パッケージ) のピン配置。 このアナログコンポーネントは、入力、出力、および電源ピンを備えています。オフセットナル、補償、イネーブルピンの設定については、メーカーのデータシートを参照してください。信号調整やアンプ回路に最適です。
詳細なピン配置データはありません: AD7703AR.
詳細は データシート をご参照ください。
主な用途
AD7703AR の用途: 6 件s: Precision Transducer Measurement, Weigh-Scale Front Ends, Industrial Process Control Data Loggers, Laboratory Instrumentation, Data Acquisition Systems, Temperature Monitoring and Control.
Precision Transducer Measurement
The AD7703AR fits thermocouple, RTD, and bridge-transducer measurement because its 20-bit resolution resolves microvolt-level signals and its differential input rejects common-mode noise on long sensor leads. In a typical circuit the sensor front end drives AIN differentially through an anti-alias filter, and system calibration removes offset and gain error contributed by the external reference and signal chain. Because the output data rate of 4 kSPS far exceeds the slow dynamics of thermal sensors, designers can lower the master clock to shrink filter bandwidth and push effective noise performance even further. The trade-off is settling time: after a step change or calibration, the digital filter needs several output updates before data is valid, so firmware must discard conversions during transients rather than expect an instantaneous sample-and-convert response.
おすすめ
Weigh-Scale Front Ends
Load cells produce full-scale outputs of only a few millivolts per volt of excitation, demanding ADC resolution well beyond 16 bits - exactly where the AD7703AR's 20-bit sigma-delta converter operates. The differential input connects directly across the bridge sense lines, while self-calibration compensates offset drift between temperature cycles. The sinc digital filter can be tuned by selecting the master clock so that 50/60 Hz line interference lands in a filter null, dramatically improving stable-weight readings without a costly analog notch filter. Performance consideration: mechanical vibration and creep, not converter speed, limit throughput here, so the 4 kSPS line rate is more than sufficient, and users should weight-average conversions in firmware for the highest stable display resolution on precision balances.
おすすめ
Industrial Process Control Data Loggers
In distributed process-control systems, the AD7703AR digitizes pressure, flow, and temperature transmitter loops where accuracy and long-term repeatability matter more than sample rate. Its serial interface isolates easily with optocouplers, keeping the noisy field side separate from controller logic, and the industrial -40C to +85C operating range matches cabinet-mounted equipment requirements. Because calibration time and output rate scale with f_CLKIN per the Analog Devices datasheet, designers clock the part conservatively (slower than maximum) to minimize noise and calibration frequency in electrically harsh environments. A practical consideration is power: the LC2MOS device draws low supply current, allowing compact isolated supplies, and the 20-SOIC package keeps the converter footprint small on dense analog input boards.
おすすめ
Laboratory Instrumentation
Bench instruments such as digital voltmeters, pH meters, and calibration sources use the AD7703AR where resolution beyond 16 bits must be achieved without trimmed discrete circuitry. Self-calibration at power-up and on command removes offset and gain error so that readings trace back mainly to the external voltage reference quality. The serial output connects directly to a microcontroller without parallel buses, simplifying isolation in floating-measurement front ends. Because the filter response is set digitally, engineers can exchange bandwidth for noise rejection by changing only the master clock, one design lever that discrete integrating converters lack. The main performance consideration is calibration duration, which scales with clock frequency; instruments should perform calibration during startup or idle periods so the user never waits for valid readings.
おすすめ
Data Acquisition Systems
For multi-board data-acquisition systems, the AD7703AR serves as a high-resolution channel converter behind multiplexers or as one converter per critical channel. Its 20-bit output resolves signals that 12- and 16-bit SAR converters quantize coarsely, and the on-chip calibration modes can be sequenced across channels at controlled intervals to hold system accuracy over temperature. The serial interface allows several converters to share a microcontroller port with individual chip-select lines, keeping harness complexity low. Designers should note that each channel change requires filter settling, so effective per-channel throughput is lower than the 4 kSPS line rate; sequencing slowly varying industrial channels and dedicating one AD7703AR per fast channel yields the best accuracy-throughput balance in mixed-speed DAQ architectures.
おすすめ
Temperature Monitoring and Control
High-accuracy temperature control loops - semiconductor ovens, environmental chambers, metrology baths - benefit from the AD7703AR's ability to resolve sub-0.01C changes from platinum RTD bridges. The 20-bit output combined with system calibration keeps converter error well below sensor error, so control-loop quality is bounded by the probe, not the digitizer. Sigma-delta filtering suppresses noise from nearby heaters and switching supplies, which commonly corrupt fast SAR readings in these environments. Since thermal plants have long time constants, the 4 kSPS maximum rate is vastly more than the loop requires; designers deliberately run a slow master clock for maximum filter attenuation at the price of latency, and should schedule recalibration when the process is at a steady state so control is not disturbed.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: AD7703AR — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | AD7703BR | AD7703AR-REEL | AD7703BN |
|---|---|---|---|---|
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Package | 20-SOIC | 20-SOIC - same footprint | 20-SOIC - same footprint | 20-DIP - footprint differs (socket adapter needed) |
| Resolution | 20 bit | 20 bit | 20 bit | 20 bit |
| Architecture | Sigma-Delta | Sigma-Delta | Sigma-Delta | Sigma-Delta |
| Output Data Rate | 4 kSPS (nominal, scales with f_CLKIN) | 4 kSPS (nominal) | 4 kSPS (nominal) | 4 kSPS (nominal) |
| Performance Grade (Linearity) | A grade (AR) | B grade - tighter linearity | A grade - same as AD7703AR | B grade - tighter linearity |
| Calibration | Self + system calibration | Self + system calibration | Self + system calibration | Self + system calibration |
| Interface | Serial | Serial (identical protocol) | Serial (identical protocol) | Serial (identical protocol) |
| Operating Temperature | -40C to +85C | -40C to +85C | -40C to +85C | -40C to +85C |
主な差別化要因
- 20-bit resolution with no missing codes （vs AD7705BRZ)
- B-grade linearity upgrade on the same footprint （vs AD7703BR)
- Calibration flexibility （vs typical uncalibrated SAR ADCs)
設計ノート
Treat the differential AIN pair as a precision analog node: use a short, balanced RC anti-alias filter ahead of the input and keep switching supplies and digital returns away from the input routing. Because the sigma-delta modulator continuously samples at a rate tied to f_CLKIN, broadband noise at the input folds into the passband if not filtered. Ground the filter resistors at the analog ground point only. Estimated: a 1 kOhm / 100 nF differential filter gives a ~1.6 kHz corner, far above the slowest process signals but effective against out-of-band RF pickup.
The most frequent AD7703 design error is reading data before the digital filter has settled. After power-up, after a calibration command, or after an input step, several output update periods must elapse before the serial data reflects the true input - the sinc filter impulse response spans multiple conversions. Discard the first conversions in firmware and gate DRDY-based reads accordingly. Also verify that the master clock source is clean: jitter or drift on CLKIN shifts the output rate and filter nulls directly, since all timing is ratiometric to f_CLKIN per the Analog Devices datasheet.
Use a single solid ground plane with a defined analog region under the AD7703AR and its reference circuitry. Connect AGND and DGND at one low-impedance point, typically directly at the ADC, so digital return currents from the serial bus do not circulate through analog ground. Place the external reference bypassing (estimated: 10 uF ceramic plus 0.1 uF) within a few millimeters of the reference pin, because reference noise appears directly in the output code with no supply-rejection benefit. Keep the serial clock and data traces short; if the interface must cross an isolation barrier, optocouplers placed close to the ADC pins minimize the antenna length of the digital nets.
Decouple each supply pin with a 0.1 uF ceramic close to the package plus local bulk capacitance, and sequence power so no input or clock pin is driven while the device is unpowered. Estimated: for legacy 5V analog systems, ensure the reference voltage and input common-mode stay within the datasheet's allowed ranges over the full -40C to +85C span, since precision converters show their worst-case headroom at temperature extremes. Confirm exact supply limits in the AD7703 datasheet specification table before finalizing the power tree.
コンプライアンス情報
RoHS/REACH status not stated in the provided verified web data; confirm on the Analog Devices AD7703 product page for the specific ordering code.
