Analog Devices

AD8010ARZ - 200mA High-Speed CFA | Analog Devices

部品番号: AD8010ARZ ✓ 生産中
200 mA Id 8-pin SOIC Package
MOQ: 1 |

AD8010ARZ 概要

The Analog Devices AD8010ARZ is a single-circuit, high-speed current-feedback amplifier rated for 200 mA output current and supplied in an 8-pin SOIC package. The device is listed in production by Analog Devices and is positioned as a low-power, high-current distribution amplifier. Its current-feedback architecture makes it suitable for high-speed signal-conditioning paths where conventional voltage-feedback amplifiers may not provide the required combination of bandwidth, slew rate, and output-drive capability.

A current-feedback amplifier, or CFA, is a closed-loop operational-amplifier architecture in which the feedback resistor participates directly in determining closed-loop gain. This approach can maintain high bandwidth as gain changes, provided the gain-setting resistor is selected according to the manufacturer’s recommended values. In the signal-chain hierarchy, the AD8010ARZ belongs to the operational-amplifier family, which sits within amplifier ICs and the broader analog signal-processing category.

The AD8010 family’s principal characteristics include low power consumption, high output-current capability, and high-speed operation. According to the Analog Devices AD8010 datasheet, the device can provide 200 mA output current. This capability is significant in applications such as video distribution, data transmission, active cable driving, and instrumentation because the amplifier must source or sink transient current while maintaining signal fidelity. The single-amplifier configuration also allows a compact implementation where only one channel is required.

The AD8010 uses a current-feedback topology rather than the conventional voltage-feedback architecture used by many general-purpose operational amplifiers. This distinction matters when setting gain and selecting feedback components. The manufacturer datasheet specifies recommended feedback resistor values and notes that larger gain resistors and corresponding bandwidth or slew-rate tradeoffs may affect performance. Board implementation should preserve short feedback paths and minimize parasitic capacitance around the high-impedance summing node.

Typical uses include driving coaxial cables, receiving signals over long interconnects, amplifying video waveforms, driving data-converter interfaces, and providing high-current output stages in test and measurement equipment. The 8-pin SOIC package supports conventional surface-mount assembly while providing enough pins for supply, input, output, and feedback connections. Exact operating limits and test conditions should be taken from the manufacturer’s complete specifications table.

The main design consideration is feedback-resistor selection. Designers should use the resistor values associated with the intended gain in the AD8010 datasheet and verify that the selected combination maintains the required bandwidth and output-current margin. Decoupling capacitors should be placed close to the supply pins, while feedback components should connect directly to the amplifier outputs to minimize parasitic effects.

This product page combines package, lifecycle, application, and design information with a strict focus on same-footprint replacement analysis. It also highlights the distinctions that matter when evaluating a drop-in amplifier: electrical proximity, pin compatibility, gain-setting behavior, output-drive capability, and thermal or layout constraints rather than package name alone.

ドロップイン代替品: AD8010ARZ — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。

この製品に利用可能なドロップイン代替品はありません。

代替品をリクエスト

AD8010ARZ 最大定格&電気的特性

Product Type Current-feedback amplifier
Amplifier Count 1 circuit
Output Current 200 mA
パッケージ 8-pin SOIC
Architecture Current-feedback
ライフサイクル状態 Production

AD8010ARZ 8-pin soic ピン配置ガイド

AD8010ARZ (8-pin soic パッケージ) のピン配置。 このアナログコンポーネントは、入力、出力、および電源ピンを備えています。オフセットナル、補償、イネーブルピンの設定については、メーカーのデータシートを参照してください。信号調整やアンプ回路に最適です。

AD8010ARZ の 8-pin soic パッケージピン配置図

詳細なピン配置データはありません: AD8010ARZ.

詳細は データシート をご参照ください。

主な用途

AD8010ARZ の用途: 6 件s: Video Signal Distribution, Coaxial Cable Driving, Data Transmission Interface, Precision Instrumentation, Active Cable Interface, Test and Measurement Output.

📺

Video Signal Distribution

The AD8010ARZ is appropriate for buffering video signals where the destination requires more drive than a low-power general-purpose amplifier can provide. Its 200 mA output-current capability helps support downstream capacitance, termination networks, and cable loading, while the current-feedback architecture supports high-speed closed-loop operation. The circuit should use the feedback resistor specified by Analog Devices for the required gain and should keep the feedback trace short to limit parasitic effects. Source and load terminations must be selected for the video standard and interface impedance. During layout, place power-bypass components near the device and provide a low-impedance ground return because high-speed edges and up to 200 mA of output current can otherwise create supply disturbance or ground bounce.

🌐

Coaxial Cable Driving

The AD8010ARZ can serve as the output stage for moderate-impedance coaxial cable interfaces because its high-speed current-feedback topology is paired with a 200 mA output-current rating. This combination is useful when attenuating and retransmitting signals across cable runs while controlling the transition rate and maintaining load drive. The amplifier should be configured with the manufacturer-recommended feedback resistor for the intended gain, and the cable termination should match the system impedance to limit reflections. PCB routing must minimize trace length and maintain controlled return paths, while the power system must accommodate both steady load current and transient current caused by cable capacitance and impedance discontinuities.

🖥️

Data Transmission Interface

The AD8010ARZ can amplify and distribute data signals in interfaces where receiver loading, cable capacitance, or output-current demand would overload a conventional low-power amplifier. Its 200 mA output-drive capability provides additional margin for driving terminated lines or adjacent circuitry, while the current-feedback architecture is well suited to high-speed transfer paths. Select the feedback resistor from the Analog Devices AD8010 specifications for the required gain and check the resulting bandwidth and slew-rate curves. Keep the input and feedback nodes compact, provide local supply bypassing, and place the line-driver interface away from switching supplies and high-current digital return paths to preserve signal integrity.

🔧

Precision Instrumentation

The AD8010ARZ is suitable for instrumentation front ends or output stages that must drive a relatively demanding load while retaining high-speed response. The current-feedback architecture allows closed-loop bandwidth to be managed through the feedback resistor, and the 200 mA output-current capability is useful when driving sensors, cable networks, or subsequent analog stages. For instrumentation designs, preserve clean grounding, avoid long high-impedance input routes, and use the exact recommended RF value for the required gain. Verify source and sink current under worst-case signal polarity because the output-current specification is not a substitute for checking output-voltage swing, supply headroom, and thermal dissipation.

🔌

Active Cable Interface

The AD8010ARZ can be implemented as the active element in a cable interface requiring stronger drive than a conventional precision op amp provides. Its 200 mA output-current capability helps the output stage respond to line capacitance, termination current, and downstream loading, while the high-speed current-feedback architecture supports signal fidelity at higher frequencies. The design should include controlled source and load terminations, a short feedback path, and local supply bypassing. Confirm that the amplifier’s operating range covers the output swing produced by the selected gain and supply. At the board level, keep the cable return adjacent to the signal trace and route the high-current output path with adequate copper and vias.

📡

Test and Measurement Output

The AD8010ARZ is appropriate for test and measurement equipment that must generate or distribute waveforms into a defined load with more current capability than a low-power amplifier. Its 200 mA output rating can support terminated cable and instrument inputs, while the current-feedback topology enables high-speed gain settings when the correct feedback resistor is used. Engineers should verify output swing, bandwidth, slew rate, and load stability for the operating frequency, then calculate dissipation from the actual supply and output voltage. Use short, impedance-controlled traces, bypass the supply pins locally, and provide a robust ground reference to prevent output-current transients from corrupting the measured signal.

What is the AD8010ARZ?
The AD8010ARZ is a single-circuit, high-speed current-feedback amplifier from Analog Devices with a 200 mA output-current rating and an 8-pin SOIC package. Analog Devices describes the AD8010 family as a low-power, high-current distribution amplifier, while the manufacturer datasheet identifies the device as a high-speed amplifier. Its current-feedback architecture is intended for applications requiring strong output drive and high-speed signal amplification.
Where can I download the AD8010ARZ datasheet PDF?
The official AD8010ARZ datasheet PDF is available from Analog Devices at analog.com under the AD8010 technical documentation. The document is titled for the AD8010 and includes the family’s recommended feedback resistor values, characteristic curves, specifications, and application guidance. Use this manufacturer document for the final supply limits, gain settings, output-current conditions, and package details when designing the circuit.
What is the AD8010ARZ pinout?
The AD8010ARZ uses an 8-pin SOIC package with one amplifier circuit. The exact pin names, signal directions, exposed-package information, and pin numbers must be assigned from the pin-description table in the official AD8010 datasheet. Because the target order also includes an 8-pin variant, verify the package drawing and ordering suffix before assigning PCB tracks; do not infer pin functions from similarly named 16-pin family members.
What output current can the AD8010ARZ deliver?
The AD8010ARZ is rated for 200 mA output current. According to the Analog Devices AD8010 datasheet, the family is designed as a low-power, high-current distribution amplifier with high-speed performance. Output-current capability should be evaluated against the actual load, supply voltage, output-voltage swing, frequency, and thermal conditions rather than treating the 200 mA rating as a load-independent guarantee.
Why is the AD8010ARZ a current-feedback amplifier?
The AD8010ARZ uses a current-feedback architecture, in which the feedback network plays an active role in setting gain and bandwidth. This approach differs from the voltage-feedback topology used by many general-purpose operational amplifiers. The Analog Devices datasheet provides characteristic curves and specifications for specified feedback-resistor values, so the gain-setting resistor should be selected directly from that guidance.
What applications suit the AD8010ARZ?
The AD8010ARZ is suitable for video distribution, cable driving, data transmission, instrumentation, and high-current output stages. Its 200 mA output-current capability is useful when the load requires more drive than a conventional low-power operational amplifier can provide. The high-speed current-feedback architecture also makes the device appropriate for signal paths where bandwidth and transient response are more important than rail-to-rail input or output operation.
How do I select the AD8010ARZ gain-setting resistor?
Select the gain-setting resistor using the feedback-resistor values and performance curves published in the Analog Devices AD8010 datasheet. The manufacturer notes that specifications and characteristic curves are referenced to particular RF values and that changing the gain resistor can alter bandwidth and slew-rate behavior. Keep the feedback connection short and follow the recommended value for the intended gain rather than relying on the gain equation alone.
Can AD8010ARZ be used for driving cables?
Yes, the AD8010ARZ can be used for cable-driving and signal-distribution designs because it combines a high-speed current-feedback amplifier with a 200 mA output-current capability. The implementation must account for source and sink current, cable capacitance, load termination, output-voltage swing, and supply limits. A 50-ohm termination or other network may be required to control reflections, but the exact network depends on the cable length and signal standard.
What is the difference between AD8010ARZ and AD8010ARZ-16?
AD8010ARZ is identified as an 8-pin SOIC current-feedback amplifier, while AD8010ARZ-16 is identified in distributor listings as a 16-pin SOIC version. Because the package and pin count differ, AD8010ARZ-16 cannot be treated as a pin-to-pin drop-in replacement for AD8010ARZ. It may represent a related dual or otherwise different configuration, so the official datasheet should be checked before assigning either electrical functions or PCB compatibility.
When should I choose AD8010ARZ over a voltage-feedback amplifier?
Choose the AD8010ARZ when the design needs the combination of a current-feedback topology, high-speed operation, and up to 200 mA output drive. A conventional voltage-feedback amplifier may be preferable when unity-gain stability, rail-to-rail input, or standard resistor-based gain calculation is the dominant requirement. The final choice should be based on the signal amplitude, bandwidth, load, supply, distortion, and required output-current margin.
What is the best drop-in replacement for AD8010ARZ?
The best drop-in replacement must use the same 8-pin SOIC footprint, preserve pin functions, and match the AD8010ARZ’s current-feedback behavior, supply requirements, gain-setting method, and 200 mA output-current capability. Cross-reference records list multiple compatible and possible-analogue products, but the verified listing does not identify enough of them to establish pin and parameter compatibility safely. No replacement should therefore be approved without a manufacturer pinout and specification comparison.
Is the AD8010ARZ in production?
The AD8010ARZ is listed in production on the official Analog Devices AD8010 product page. This status indicates that the manufacturer currently presents the AD8010 family as a production product rather than an obsolete or discontinued device. For a new design, confirm the exact ordering suffix, package, temperature grade, and regional lifecycle status during purchasing because family-level production status does not guarantee every package variant.
Where can I buy AD8010ARZ and check its price and lead time?
Use the “Request a Quote” form on this page to request AD8010ARZ pricing, current stock, minimum order quantity, and production lead time. The quote form provides a direct channel for the exact AD8010ARZ ordering code and package configuration. Avoid approving a substitute from a family-level page, because the related AD8010 variants use different suffixes and package or reel arrangements.
Is AD8010ARZ suitable for industrial temperature applications?
The AD8010ARZ may suit an industrial design if its specified operating-temperature range covers the required ambient and enclosure conditions. The manufacturer order page identifies the device as a production part, but the exact temperature grade for AD8010ARZ must be taken from the ordering table and datasheet. Verify the operating range, supply limits, and temperature-related performance before using the amplifier in an industrial or automotive environment.
What should engineers know about AD8010ARZ thermal and layout design?
The key layout priorities are short feedback loops, close placement of supply bypass capacitors, and controlled return paths for high output-current transients. Because the AD8010ARZ can deliver 200 mA, PCB traces, vias, ground connections, and the load interface must be capable of handling the required peak current without excessive voltage drop. Derive the amplifier’s dissipation from the actual supply, output voltage, load current, and operating duty cycle.

エンジニアリング参考データ: AD8010ARZ — 比較、設計ガイダンス、コンプライアンス情報。

選定ガイド

Choose the AD8010ARZ when the design requires a high-speed current-feedback amplifier with a 200 mA output-current rating and only one amplifier circuit is needed. It is particularly relevant to video distribution, cable driving, data transmission, instrumentation, and test-equipment output stages where a low-power amplifier cannot supply the required load current. Select a voltage-feedback amplifier instead when unity-gain stability, rail-to-rail input behavior, or standard resistor-based gain calculation dominates the design. Do not substitute AD8010ARZ-16 without a board redesign because it uses a 16-pin SOIC rather than the target’s 8-pin package. A valid drop-in replacement must match the footprint, pin functions, current-feedback gain-setting method, supply limits, bandwidth, output swing, and 200 mA-class drive requirement.

代替品との比較

パラメータ この製品
Product Type Current-feedback amplifier
Amplifier Count 1 circuit
Package 8-pin SOIC
Brand Analog Devices
Output Current 200 mA
Architecture Current-feedback
Lifecycle Status Production

主な差別化要因

  • High output-drive capability (vs General-purpose low-power operational amplifiers)
  • Current-feedback signal path (vs Conventional voltage-feedback amplifiers)
  • Compact single-amplifier package (vs AD8010ARZ-16)

設計ノート

Keep the gain-setting and feedback resistors close to their corresponding AD8010ARZ pins, and minimize the loop area around the current-feedback summing node. Long feedback traces can add parasitic inductance and capacitance that alter high-frequency behavior. Place the supply-bypass components directly beside the supply pins with short ground returns, and separate sensitive input routing from the output and return-current paths used by loads approaching the 200 mA output-current capability.

Calculate the amplifier’s dissipation from the actual supply voltage, output voltage, load current, and duty cycle rather than using supply voltage alone. The AD8010ARZ can deliver 200 mA, so copper width, vias, connectors, and ground-return paths must handle peak source and sink current without excessive voltage drop. Ensure the output-voltage swing remains valid for the selected load; a device can reach its current limit while still lacking sufficient voltage headroom for the required waveform.

Use the gain-setting resistor values and characteristic curves published for the AD8010 in the manufacturer datasheet. The feedback resistor is a central part of current-feedback amplifier behavior, so changing it to obtain a nominal gain can shift bandwidth, slew rate, and output-drive performance. For cable or long-interconnect outputs, use controlled terminations to limit reflections and compare the complete source, line, and load arrangement against the required bandwidth.

コンプライアンス情報

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
鉛フリー
Unknown
ハロゲンフリー
Unknown
紛争鉱物
Unknown

The official product page identifies AD8010 as production. Specific RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations for AD8010ARZ require confirmation from the manufacturer product documentation.

データ検証日: 2026-11-18 — データはXAIPARTの部品エンジニアリングチームによって検証・管理されています

関連検索

AD8010ARZ datasheet AD8010ARZ specifications AD8010ARZ pinout AD8010ARZ datasheet pdf Analog Devices AD8010ARZ AD8010ARZ current feedback amplifier AD8010ARZ 200mA amplifier AD8010ARZ 8-SOIC footprint AD8010ARZ cable driver AD8010ARZ drop-in replacement AD8010ARZ price AD8010ARZ stock

関連部品&用語

Analog Devices AD8010 AD8010ARZ AD8010ARZ-16 Current-feedback amplifier CFA Operational amplifier Amplifier IC Analog signal processing High-speed amplifier Distribution amplifier 200 mA output current 8-pin SOIC SOIC package family Surface-mount package Feedback resistor Video distribution Cable driver Data transmission Instrumentation Test and measurement Power supply bypassing Signal integrity
クイック見積RFQ
詳細をすべてご記入ください — 営業チームが24時間以内にご返信いたします
部品番号 メーカー パッケージ QTY 目標価格 小計
✓
見積を送信しました!

24時間以内にメールでご返信いたします

1
RFQ送信済み
2
見積受領
3
注文済み
4
お支払い
5
発送済み
6
配達済み
RFQの詳細を表示