LT1469CS8 - Dual 90MHz Precision Op Amp | Analog Devices
部品番号: LT1469CS8 ✓ 生産中LT1469CS8 概要
An operational amplifier is a voltage-controlled differential amplifier that uses high open-loop gain to amplify small signals. A dual operational amplifier contains two amplifiers in one package, reducing board area while supporting independent signal paths. The LT1469 series belongs to the precision operational-amplifier hierarchy, combining precision and AC performance for ADC buffers, DAC current-to-voltage converters, instrumentation, and active filtering.
The LT1469CS8 provides a 90 MHz gain-bandwidth product and a 22 V/us slew rate. According to the manufacturer product description and datasheet, it achieves 16-bit accuracy and settles to within 150 uV in 900 ns after a 10 V step. These characteristics make the device suitable for high-accuracy systems requiring fast acquisition, accurate current-to-voltage conversion, and low-distortion signal amplification.
Its precision is reflected in a maximum input offset voltage of 350 uV, while the operating temperature range for LT1469CS8 is 0°C to 70°C. The device is supplied in an 8-pin SOIC package measuring 3.90 mm wide. The dual-channel organization allows matched signal conditioning, differential amplifier implementations, or two independent precision amplifier stages without requiring two separate packages.
Typical applications include high-resolution ADC input buffers, DAC current-to-voltage conversion, low-frequency instrumentation, active filters, sample-and-hold signal conditioning, and precision industrial control systems. Its 90 MHz bandwidth supports higher-frequency signals than conventional precision op amps, while the 22 V/us slew rate helps preserve amplitude accuracy on rapidly changing waveforms.
PCB design should keep input and feedback traces short, place compensation and feedback components close to the device, and provide solid ground-plane continuity. Designers should also verify gain stability, output swing, load capability, input common-mode range, and operating-temperature limits against their intended signal and supply conditions.
This product page combines the exact LT1469CS8 specifications, manufacturer documentation, sourcing guidance, package details, and verified drop-in candidates. It is intended to help engineers identify the correct operational amplifier, confirm electrical compatibility, and plan a reliable eight-pin precision analog layout.
ドロップイン代替品: LT1469CS8 — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
LT1469CS8#PBF
✅ ドロップイン📋 参考代替品(カタログ未掲載)
LT1469CS8#TR
✅ ドロップイン📋 参考代替品(カタログ未掲載)
LT1469CS8#TRPBF
✅ ドロップイン📋 参考代替品(カタログ未掲載)
LT1469IS8#PBF
✅ ドロップイン📋 参考代替品(カタログ未掲載)
LT1469CS8 最大定格&電気的特性
| Amplifier Type | General-purpose precision operational amplifier |
| Number of Channels | 2 channels |
| Gain-Bandwidth Product | 90 MHz |
| Slew Rate | 22 V/us |
| Accuracy Class | 16-bit accuracy |
| Settling Time | 900 ns to 150 uV for a 10 V step |
| Maximum Input Offset Voltage | 350 uV |
| 動作温度範囲 | 0°C to 70°C |
| Package Type | 8-pin SOIC |
| Package Width | 3.90 mm |
| Total Pin Count | 8 pins |
| 実装タイプ | Surface mount |
LT1469CS8 ピン構成
| ピン 1 | OUTA — Amplifier A output |
| ピン 2 | -INA — Inverting input for amplifier A |
| ピン 3 | +INA — Non-inverting input for amplifier A |
| ピン 4 | V- — Negative supply connection |
| ピン 5 | +INB — Non-inverting input for amplifier B |
| ピン 6 | -INB — Inverting input for amplifier B |
| ピン 7 | OUTB — Amplifier B output |
| ピン 8 | V+ — Positive supply connection |
主な用途
LT1469CS8 の用途: 6 件s: High-Resolution ADC Input Buffer, DAC Current-to-Voltage Conversion, Precision Instrumentation Signal Conditioning, Active Analog Filtering, Sample-and-Hold Signal Conditioning, Precision Industrial Control Systems.
High-Resolution ADC Input Buffer
The LT1469CS8 fits ADC input stages that require more bandwidth than a conventional precision amplifier while maintaining low-offset accuracy. Its 90 MHz gain-bandwidth product and 22 V/us slew rate allow the amplifier to respond to changing sensor or conversion signals, while the specified 16-bit accuracy supports high-resolution converter designs. Use it as a unity-gain or moderate-gain buffer ahead of an ADC, with short feedback paths and carefully selected anti-alias filtering. The 900 ns settling specification to 150 uV for a 10 V step is particularly relevant when determining acquisition time and the allowable settling interval for the converter.
DAC Current-to-Voltage Conversion
The LT1469CS8 is well suited to the transimpedance stage of a DAC current-to-voltage converter because the manufacturer identifies this application explicitly. A 90 MHz gain-bandwidth product supports the feedback network required to convert a high-speed current-output DAC into a voltage, and the 22 V/us slew rate helps maintain accurate output transitions. The device's maximum offset voltage of 350 uV contributes directly to output-conversion error and should be included in the system error budget. Component matching, parasitic capacitance, DAC output compliance, and required settling time should be verified together before finalizing the circuit.
Precision Instrumentation Signal Conditioning
For instrumentation signal conditioning, the LT1469CS8 combines 16-bit accuracy, 90 MHz bandwidth, and fast settling in a compact 8-pin SOIC package. Its two channels can amplify or buffer two related signals, or implement differential conditioning when appropriately configured. The low maximum offset voltage helps preserve small-signal accuracy, while the high bandwidth supports sensors and test signals whose frequency content extends beyond the range of conventional slow-precision amplifiers. Designers should still check input bias current, input common-mode range, noise density, and output-swing requirements because those parameters determine whether the apparently simple dual-amplifier topology preserves the desired measurement accuracy.
Active Analog Filtering
The LT1469CS8 can implement active filters requiring accurate gain and reasonable bandwidth. Its 90 MHz gain-bandwidth product gives designers more unity-gain bandwidth than a conventional precision op amp, while 16-bit accuracy supports high-resolution signal conditioning around the filter. The 22 V/us slew rate helps reduce amplitude error on large or fast signals, and 900 ns settling behavior supports time-domain measurements. Component tolerances, resistor noise, and capacitor selection should be calculated together with the op amp's gain-bandwidth response. Pay particular attention to loop stability, especially at the highest practical closed-loop gain.
Sample-and-Hold Signal Conditioning
The LT1469CS8 is appropriate for buffering and conditioning paths associated with sample-and-hold systems because its 900 ns settling time to 150 uV after a 10 V step provides a defined transient response. The dual channels can serve separate input and hold-stage paths, while 90 MHz bandwidth and 22 V/us slew rate help process high-speed edges. The amplifier's offset voltage contributes directly to the sampled signal, so the 350 uV maximum specification must be evaluated against the system resolution. In addition, verify the switch resistance, holding capacitor, injected charge, leakage, and the required settling time for the complete acquisition chain.
Precision Industrial Control Systems
The LT1469CS8 supports industrial control and monitoring circuits that need both signal accuracy and bandwidth. Its 0°C to 70°C rating covers commercial-temperature equipment, while the dual 90 MHz, 22 V/us channels can condition control or sensor signals with faster response than slow precision amplifiers. The amplifier may be used around data converters, control loops, and analog monitoring blocks, provided its supply, common-mode input, output swing, and load limits meet the operating point. For installations with wider environmental requirements, select a grade with the appropriate temperature and qualification coverage rather than relying on the commercial LT1469CS8 outside its stated range.
エンジニアリング参考データ: LT1469CS8 — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | LT1469CS8#PBF | LT1469CS8#TR | LT1469CS8#TRPBF | LT1469IS8#PBF |
|---|---|---|---|---|---|
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Package | 8-pin SOIC | 8-pin SOIC | 8-pin SOIC | 8-pin SOIC | 8-pin SOIC |
| Amplifier Channels | 2 | 2 | 2 | 2 | 2 |
| Gain-Bandwidth Product | 90 MHz | 90 MHz | 90 MHz | 90 MHz | 90 MHz |
| Slew Rate | 22 V/us | 22 V/us | 22 V/us | 22 V/us | 22 V/us |
| Accuracy | 16-bit accurate | 16-bit accurate | 16-bit accurate | 16-bit accurate | 16-bit accurate |
| Settling | 900 ns to 150 uV for a 10 V step | 900 ns to 150 uV for a 10 V step | 900 ns to 150 uV for a 10 V step | 900 ns to 150 uV for a 10 V step | 900 ns to 150 uV for a 10 V step |
主な差別化要因
- Combines precision and high-speed amplification in one dual package (vs LT1469CS8#PBF)
- Commercial-temperature grade is suitable for standard office and commercial equipment (vs LT1469IS8#PBF)
- Supports two independent precision amplifier channels in an 8-pin package (vs LT1469CS8#TRPBF)
設計ノート
Route each amplifier's input and feedback components close to their associated pins. Keep the feedback loop compact, maintain a continuous ground reference beneath the package, and avoid routing high-speed or switching-current paths beneath the SOIC footprint. The dual layout should keep amplifier A and amplifier B return currents separated where practical, particularly when one channel handles a fast high-amplitude signal and the other processes a small precision signal.
Evaluate closed-loop bandwidth and phase margin at the highest gain used in the design. The LT1469CS8 has a 90 MHz gain-bandwidth product, but the realized response also depends on feedback resistance, capacitance, load capacitance, and source impedance. Add or adjust compensation only after measuring or calculating the complete network, and confirm stability across the intended supply-voltage and temperature ranges rather than relying on the gain-bandwidth figure alone.
Do not treat the 16-bit accuracy description as a guaranteed 16-bit converter result. Overall accuracy also depends on offset voltage, bias current, noise, drift, resistor and capacitor tolerances, reference accuracy, and output-loading conditions. The maximum input offset voltage of 350 uV should be included in the error budget, while supply voltage, input common-mode range, and output swing must be checked against the actual signal.
Place supply-decoupling capacitors close to the positive and negative pins, with the ground return kept short and low-impedance. The LT1469CS8 operates from dual supplies, so both rails require stable reference planes. Verify that source and sink current remain suitable for the output stage at the selected frequency and load, and use resistor isolation if capacitive loading could impair settling or stability.
コンプライアンス情報
The base LT1469CS8 ordering information does not explicitly establish the requested compliance fields. Confirm RoHS, REACH, lead-free, halogen-free, conflict-minerals, and automotive qualification status from the exact orderable suffix and current manufacturer documentation.