AD8226ARZ - Wide-Supply-Range Rail-to-Rail InAmp | Analog Devices
部品番号: AD8226ARZ ✓ 生産中| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $3.85 | $3.85 |
| 10 | $3.85 | $38.50 |
| 100 | $0 | $0.00 |
| 500 | $0 | $0.00 |
| 1,000 | $0 | $0.00 |
AD8226ARZ 概要
An instrumentation amplifier is a specialized analog amplifier designed to amplify differential sensor signals while rejecting common-mode noise. Its typical position is between a sensor bridge, thermocouple, strain gauge, pressure transducer, or other low-level source and an ADC or measurement system. The instrumentation-amplifier category belongs to the broader operational-amplifier and signal-conditioning hierarchy, with gain, input impedance, common-mode rejection, noise, bandwidth, and supply-voltage behavior determining its usefulness.
The AD8226 uses one external resistor to establish gains from 1 to 1000, reducing the number of precision components required for a fixed-gain design. Its rail-to-rail output helps maximize usable output range in single-supply systems. The wide supply range supports multiple industrial and embedded signal-chain architectures, while the input capability below ground permits measurements that extend through the zero-volt reference when the circuit and system grounding are designed appropriately.
The AD8226 family is offered in 8-lead MSOP and SOIC packages and is specified for -40°C to +125°C operation in the manufacturer data. The AD8226ARZ ordering code identifies the SOIC package option; package dimensions, pin names, absolute maximum ratings, and detailed electrical limits should be confirmed in the manufacturer data sheet before layout or replacement work.
Typical uses include industrial multichannel measurement, bridge excitation and sensing, current-loop signal conditioning, data-acquisition front ends, sensor interfaces, and instrumentation systems. Because the AD8226 is an analog signal-chain device, PCB layout should prioritize short input paths, careful grounding, low-noise supply routing, and stable gain-resistor placement.
When designing around the AD8226ARZ, verify the selected gain, supply voltages, input common-mode range, output swing, and bandwidth against the actual sensor signal. This page synthesizes the verified manufacturer and distributor information, available cross-reference results, application guidance, and design considerations to support component selection and procurement.
ドロップイン代替品: AD8226ARZ — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: AD8226ARZ （同一形状・フットプリント） — 相違点: Package, Gain Range, Input Offset Voltage, Output Type, Amplifier Type.
クイック比較ツール — 並列比較する代替部品を選択:
AD8226ARZ-R7
✅ ドロップイン📋 参考代替品（カタログ未掲載）
AD8226ARZ-RL
✅ ドロップイン📋 参考代替品（カタログ未掲載）
AD8227ARZ
✅ ドロップイン✓ 在庫あり
$3.1 / 個
データシートを見る →AD8220ARZ
✅ ドロップイン📋 参考代替品（カタログ未掲載）
AD8221ARZ
✅ ドロップイン✓ 在庫あり
$3.29 / 個
データシートを見る →AD8226ARZ 最大定格＆電気的特性
| Product Type | Single-circuit instrumentation amplifier |
| Gain Range | 1 to 1000 |
| Gain Setting | One external resistor |
| 出力タイプ | Rail-to-rail output |
| Input Capability | Input voltage can go below ground |
| Signal Handling | Designed for ±10 V signals |
| パッケージ | 8-lead SOIC |
| Package Family | SOIC-8, surface-mount |
| 動作温度 | -40°C to +125°C |
| Number of Circuits | 1 |
| Applications | Multichannel, space-constrained industrial applications |
| Manufacturer | Analog Devices |
| Manufacturer Lifecycle Status | Production |
AD8226ARZ soic-8, surface-mount ピン配置ガイド
AD8226ARZ (soic-8, surface-mount パッケージ) のピン配置。 このアナログコンポーネントは、入力、出力、および電源ピンを備えています。オフセットナル、補償、イネーブルピンの設定については、メーカーのデータシートを参照してください。信号調整やアンプ回路に最適です。
詳細なピン配置データはありません: AD8226ARZ.
詳細は データシート をご参照ください。
主な用途
AD8226ARZ の用途: 6 件s: Industrial Sensor Front Ends, Bridge and Strain-Gauge Measurement, Current-Loop Signal Conditioning, Data-Acquisition Systems, Precision Measurement Instrumentation, Compact Analog Control Boards.
Industrial Sensor Front Ends
The AD8226ARZ fits industrial sensor front ends because its gain can be set from 1 to 1000 with one external resistor and its input can extend below ground. Place it between a bridge, resistive sensor, or other differential source and an ADC or controller. The SOIC-8 package supports compact multichannel boards, while the -40°C to +125°C family specification supports demanding environments. Confirm common-mode range, output swing, and bandwidth before selecting the gain resistor.
おすすめ
Bridge and Strain-Gauge Measurement
For bridge or strain-gauge measurement, the AD8226ARZ provides differential amplification with programmable gain from 1 to 1000. Its rail-to-rail output can improve usable range in low-voltage sensor systems, while the input capability below ground supports signals that extend through the zero reference. The gain resistor should be placed close to the device, and input routing should be symmetric to reduce conversion of common-mode noise into differential error.
おすすめ
Current-Loop Signal Conditioning
AD8226ARZ can condition low-level differential signals in industrial current-measurement loops when the selected supply and gain preserve the loop signal. The one-resistor gain setting simplifies calibration and design revision, and rail-to-rail output helps reduce headroom constraints in compact analog modules. Check the datasheet input common-mode range at the chosen gain, because gain and common-mode performance are coupled in instrumentation amplifiers.
おすすめ
Data-Acquisition Systems
The AD8226ARZ is appropriate for multichannel data-acquisition systems requiring a compact analog input stage. Its 8-lead SOIC package and one-resistor gain programming make it convenient for repeated channel designs, while rail-to-rail output can leave more signal range for downstream conversion. Use careful channel-to-channel isolation, grounding, and supply bypassing to prevent common-mode and switching noise from limiting the useful accuracy of the front end.
おすすめ
Precision Measurement Instrumentation
For precision measurement instrumentation, AD8226ARZ combines adjustable gain, wide supply-range capability, and a compact SOIC-8 footprint. It can amplify a differential sensor signal before precision conversion or measurement, provided the operating point remains within the amplifier's input and output limits. The -40°C to +125°C family specification allows use in thermally varied industrial equipment, but system calibration should account for temperature-dependent behavior documented by the manufacturer.
おすすめ
Compact Analog Control Boards
AD8226ARZ is useful in compact analog control boards where sensor conditioning must be integrated close to the controller. The rail-to-rail output supports systems with limited supply headroom, and the external-resistor gain setting permits board-level scaling without a complex resistor network. Keep the gain component and input traces short, connect the supply bypass capacitors according to the datasheet, and verify startup and settling behavior for the intended sensor bandwidth.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: AD8226ARZ — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | AD8226ARZ-R7 | AD8226ARZ-RL | AD8227ARZ | AD8220ARZ | AD8221ARZ |
|---|---|---|---|---|---|---|
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
主な差別化要因
- Minimum gain （vs AD8227ARZ)
- Package integration （vs AD8226ARZ-R7)
- Signal-range positioning （vs AD8220ARZ)
設計ノート
Route the two differential input paths as short and symmetric as practical, and place the external gain resistor close to the gain-setting pins specified by Analog Devices. Keep the input loop area small to reduce susceptibility to magnetic and electric fields. Provide a quiet ground reference and avoid sharing high-current return paths with the sensor signal return; this is particularly important when the AD8226 gain is set above 1.
Place supply bypass capacitors at the AD8226 power pins and follow the datasheet's recommended values and layout. Decoupling should be placed close to the device so that switching-current loops remain small. Although the AD8226 has a wide supply range and rail-to-rail output, those features do not guarantee stable operation outside the specified input, output, and common-mode limits. Validate the actual supply range and output headroom before final schematic release.
Do not assume that another AD822x part is interchangeable merely because it uses an 8-lead SOIC package. AD8227ARZ has a verified gain range of 5 to 1000, while AD8226 supports 1 to 1000. Confirm package suffix, pin names, gain resistor calculation, input common-mode range, output swing, and temperature specification against the manufacturer datasheet. For layout and production procurement, also verify whether the required reel or cut-tape ordering code is active.
コンプライアンス情報
The supplied verified manufacturer and distributor snippets do not explicitly state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status. These fields remain unknown rather than being inferred from the manufacturer or package type.
