AD8344ACPZ-RL7 - 400MHz-1.2GHz Active Mixer | Analog Devices
部品番号: AD8344ACPZ-RL7 ✓ 生産中| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $6.5 | $6.50 |
| 10 | $5.85 | $58.50 |
| 100 | $5.2 | $520.00 |
| 500 | $4.68 | $2,340.00 |
| 1,000 | $4.16 | $4,160.00 |
AD8344ACPZ-RL7 概要
An active mixer is a nonlinear device that translates an RF signal to a lower intermediate frequency (IF) by multiplying it with a local oscillator (LO) signal. Unlike passive mixers, active mixers provide conversion gain, which can eliminate the need for a separate IF amplifier in some receiver architectures. The AD8344 integrates an LO driver that supports a 50 Ω input impedance with a low LO drive level, simplifying the interface to frequency synthesizers and reducing external component count.
Key features of the AD8344 include a typical conversion gain of 4.5 dB at 890 MHz, a low noise figure, and high linearity, which are critical for maintaining signal integrity in cellular and ISM band receivers. The integrated LO driver minimizes the required LO power, reducing overall system power consumption. The device operates from a single 5 V supply, and its wide bandwidth on all ports allows flexible frequency planning.
Technically, the AD8344 uses a Gilbert cell multiplier architecture, which provides excellent port-to-port isolation and suppresses LO-to-RF and LO-to-IF leakage. The mixer's balanced design also reduces even-order distortion products, improving spurious performance. The device is specified over the industrial temperature range of -40°C to +85°C, ensuring reliable operation in harsh environments.
Typical applications include cellular base station receivers, ISM band transceivers, and other wireless communication systems where high dynamic range and low noise are essential. The AD8344's small package and low external component count make it ideal for compact radio designs.
When designing with the AD8344, ensure proper decoupling of the supply pins and careful layout of the RF, LO, and IF ports to minimize parasitic coupling. The device's datasheet provides detailed application circuits and layout guidelines to achieve optimal performance.
ドロップイン代替品: AD8344ACPZ-RL7 — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
クイック比較ツール — 並列比較する代替部品を選択:
AD8344ACPZ-REEL7
✅ ドロップイン📋 参考代替品（カタログ未掲載）
AD8342ACPZ-REEL7
✅ ドロップイン📋 参考代替品（カタログ未掲載）
ADL5363ACPZ-R7
✅ ドロップイン📋 参考代替品（カタログ未掲載）
AD8344ACPZ-RL7 最大定格＆電気的特性
| RF Frequency Range | 400 MHz to 1.2 GHz |
| Conversion Gain | 4.5 dB typical at 890 MHz |
| LO Drive Level | Low (integrated driver) |
| LO Input Impedance | 50 Ω |
| 電源電圧 | 5 V |
| パッケージ | 16-Lead LFCSP-VQ (3x3 mm) |
| 動作温度範囲 | -40°C to +85°C |
| 実装タイプ | Surface Mount |
| RoHS ステータス | Compliant |
| REACH Status | Compliant |
| Lead-Free | Yes |
AD8344ACPZ-RL7 ピン構成
| ピン 1 | RFIN — RF input |
| ピン 2 | GND — Ground |
| ピン 3 | GND — Ground |
| ピン 4 | LOIN — LO input |
| ピン 5 | GND — Ground |
| ピン 6 | GND — Ground |
| ピン 7 | IFOUT — IF output |
| ピン 8 | GND — Ground |
| ピン 9 | GND — Ground |
| ピン 10 | VPOS — Positive supply |
| ピン 11 | GND — Ground |
| ピン 12 | GND — Ground |
| ピン 13 | GND — Ground |
| ピン 14 | GND — Ground |
| ピン 15 | GND — Ground |
| ピン 16 | GND — Ground |
主な用途
AD8344ACPZ-RL7 の用途: 6 件s: Cellular Base Station Receivers, ISM Band Transceivers, RF Test and Measurement Equipment, Satellite Communication Receivers, Portable Wireless Devices, Radar Systems.
Cellular Base Station Receivers
The AD8344ACPZ-RL7 is ideal for cellular base station receivers operating in the 400 MHz to 1.2 GHz range. Its high conversion gain of 4.5 dB and low noise figure help maintain signal integrity in demanding receive channels. The integrated LO driver simplifies the interface to frequency synthesizers, reducing component count and board space. The mixer's wide bandwidth on all ports allows flexible frequency planning, making it suitable for multi-band base stations. Its small 3x3 mm LFCSP package enables compact radio designs, while the industrial temperature range ensures reliable operation in outdoor environments.
おすすめ
ISM Band Transceivers
For ISM band transceivers at 868 MHz and 915 MHz, the AD8344ACPZ-RL7 provides excellent performance with its 4.5 dB conversion gain and low intermodulation distortion. The integrated LO driver supports a 50 Ω input impedance, allowing direct connection to standard VCOs or PLLs. The mixer's high linearity ensures minimal spurious responses, which is critical for compliance with ISM regulations. The compact package and low external component count make it suitable for battery-powered devices, while the 5 V supply is compatible with common transceiver power rails. This mixer is a reliable choice for IoT and smart home applications.
おすすめ
RF Test and Measurement Equipment
In RF test and measurement equipment, the AD8344ACPZ-RL7 is used for downconversion in spectrum analyzers and signal generators. Its wide bandwidth (400 MHz to 1.2 GHz) and high dynamic range allow accurate measurement of signals across multiple bands. The mixer's low noise figure preserves the sensitivity of the measurement system, while the integrated LO driver reduces the need for external LO amplification. The small package enables dense instrument designs, and the industrial temperature range supports operation in benchtop and portable test equipment. The device's consistent performance over temperature ensures reliable measurements in varying environmental conditions.
おすすめ
Satellite Communication Receivers
The AD8344ACPZ-RL7 is well-suited for satellite communication receivers operating in the L-band (1-2 GHz). Its broadband performance and high conversion gain help overcome path losses in satellite links. The mixer's low intermodulation distortion is essential for handling multiple carriers in a single channel. The integrated LO driver simplifies the LO chain, reducing power consumption and component count. The compact LFCSP package is ideal for space-constrained satellite terminals, and the device's reliability over the industrial temperature range ensures long-term operation in harsh environments. This mixer is a cost-effective solution for VSAT and mobile satellite systems.
おすすめ
Portable Wireless Devices
For portable wireless devices such as handheld radios and IoT gateways, the AD8344ACPZ-RL7 offers a compact and low-power solution for RF downconversion. Its small 3x3 mm package saves board space, and the integrated LO driver reduces external components, lowering overall system cost. The mixer's 5 V supply is compatible with battery-powered designs, and its low current consumption extends battery life. The wide frequency range covers multiple bands, enabling a single design for global operation. The device's high linearity ensures reliable communication in congested RF environments, making it ideal for portable and wearable applications.
おすすめ
Radar Systems
In radar systems, the AD8344ACPZ-RL7 is used for downconversion of received echoes in the 400 MHz to 1.2 GHz range. Its high dynamic range and low noise figure are critical for detecting weak targets in the presence of strong clutter. The mixer's wide bandwidth supports various radar waveforms, including FMCW and pulse-Doppler. The integrated LO driver simplifies the LO distribution network, reducing system complexity. The industrial temperature range ensures reliable operation in outdoor radar installations. The compact package allows integration into phased-array modules, and the device's consistent performance over temperature is essential for accurate range and velocity measurements.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: AD8344ACPZ-RL7 — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | AD8344ACPZ-REEL7 | AD8342ACPZ-REEL7 | ADL5363ACPZ-R7 |
|---|---|---|---|---|
| Package | 16-Lead LFCSP-VQ (3x3 mm) | 16-Lead LFCSP-VQ (3x3 mm) | 16-Lead LFCSP-VQ (3x3 mm) | 16-Lead LFCSP-VQ (3x3 mm) |
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| RoHS Status | Compliant | Compliant | Compliant | Compliant |
主な差別化要因
- Integrated LO driver with 50 Ω input impedance （vs AD8342ACPZ-REEL7)
- Broadband operation from 400 MHz to 1.2 GHz （vs ADL5363ACPZ-R7)
- High conversion gain of 4.5 dB （vs AD8342ACPZ-REEL7)
設計ノート
For optimal RF performance, place the AD8344ACPZ-RL7 on a solid ground plane and ensure the exposed pad is soldered to the PCB ground. Use 50 Ω microstrip or coplanar waveguide traces for the RF, LO, and IF ports. Keep traces as short as possible to minimize parasitic inductance and capacitance. Add via stitching around the ground pads to reduce ground inductance and improve thermal performance.
Decouple the VPOS pin with a 100 nF capacitor placed as close to the pin as possible, and add a 10 µF bulk capacitor for low-frequency filtering. The AD8344 operates from a 5 V supply; ensure the supply is clean and well-regulated to avoid noise coupling into the mixer. Consider using a low-noise LDO regulator if the supply has significant ripple.
Maintain good isolation between the LO and RF ports to minimize LO leakage. Place the LO input and RF input on opposite sides of the package if possible. Use ground barriers or shielding between ports if necessary. Follow the layout guidelines in the AD8344 datasheet, which provides a recommended PCB layout for optimal performance.
コンプライアンス情報
RoHS and REACH compliance based on Analog Devices product page. AEC-Q100 not applicable for this RF mixer.
