AD9082BBCZ - Quad 12GSPS RF DAC & Dual 6GSPS ADC | Analog Devices
部品番号: AD9082BBCZ ✓ 生産中| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $1488.91 | $1,488.91 |
| 10 | $1400 | $14,000.00 |
| 100 | $1300 | $130,000.00 |
| 500 | $1200 | $600,000.00 |
| 1,000 | $1100 | $1,100,000.00 |
AD9082BBCZ 概要
A mixed-signal front-end (MxFE) is a single-chip solution that integrates high-speed data converters with digital signal processing blocks, enabling direct RF sampling and synthesis. It sits between the analog RF domain and the digital baseband processor, replacing multiple discrete components. The MxFE hierarchy includes RF transceiver -> mixed-signal front-end -> data converter -> semiconductor, streamlining system design and reducing board space.
Key features of the AD9082 include a flexible reconfigurable common platform design, supporting 4 DACs and 2 ADCs (4D2A) and 2D2A options. It supports single, dual, and quad band operation, with fully bypassable datapaths and DSP blocks. The device offers DAC to ADC sample rate ratios of 1, 2, 3, and 4, and includes an on-chip PLL with multichip synchronization. These features enable direct RF sampling at frequencies up to 6 GHz for the ADC and 12 GSPS for the DAC, eliminating the need for multiple up/down conversion stages.
Technically, the AD9082 integrates a 16-bit DAC core operating at up to 12 GSPS, providing high dynamic range and low noise for transmit paths. The 12-bit ADC core samples at up to 6 GSPS, capturing wideband signals directly at RF frequencies. The on-chip DSP blocks allow for digital up/down conversion, filtering, and gain adjustment, reducing the processing load on the FPGA or ASIC. The device supports JESD204B/C serial interfaces for high-speed data transfer to and from digital processors.
Typical applications include 5G NR base stations, phased array radar, electronic warfare, and wideband software-defined radios. The AD9082's ability to handle multiple bands and channels simultaneously makes it suitable for massive MIMO systems and spectrum monitoring. Its high sample rates and direct RF sampling capability reduce system complexity and power consumption compared to traditional heterodyne architectures.
When designing with the AD9082, careful attention must be paid to power supply decoupling and thermal management. The device requires multiple supply rails, and proper layout of the high-speed digital and analog interfaces is critical to achieve specified performance. The on-chip PLL requires a clean reference clock, and the JESD204B/C interface must be configured correctly for reliable data transfer.
ドロップイン代替品: AD9082BBCZ — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: AD9082BBCZ （同一形状・フットプリント） — 相違点: Package, Number of DACs, ADC Maximum Sample Rate, Core Supply Voltage, Data Interface.
クイック比較ツール — 並列比較する代替部品を選択:
AD9082BBPZ-2D2AC
✅ ドロップイン📋 参考代替品（カタログ未掲載）
AD9081BBCZ
✅ ドロップイン ⚠️ 仕様未検証✓ 在庫あり
$1082.84 / 個
データシートを見る →AD9174BBCZ
✅ ドロップイン ⚠️ 仕様未検証✓ 在庫あり
価格はお問い合わせください
データシートを見る →AD9173BBCZ
✅ ドロップイン ⚠️ 仕様未検証✓ 在庫あり
$120 / 個
データシートを見る →AD9172BBCZ
✅ ドロップイン ⚠️ 仕様未検証✓ 在庫あり
$59.7 / 個
データシートを見る →AD9082BBCZ 最大定格＆電気的特性
| DAC Resolution | 16-bit |
| DAC Maximum Sample Rate | 12 GSPS |
| ADC Resolution | 12-bit |
| ADC Maximum Sample Rate | 6 GSPS |
| Number of DACs | 4 |
| Number of ADCs | 2 |
| パッケージ | 324-BGA-ED (15x15 mm) |
| 実装タイプ | Surface Mount |
| 動作温度範囲 | -40°C to +85°C |
| インターフェース | JESD204B/C |
| On-Chip PLL | Yes |
| Multichip Synchronization | Yes |
| RoHS ステータス | Compliant |
AD9082BBCZ ピン構成
| ピン A1 | VDD — Power supply |
| ピン A2 | GND — Ground |
| ピン B1 | DAC0_P — DAC output positive |
| ピン B2 | DAC0_N — DAC output negative |
| ピン C1 | ADC0_P — ADC input positive |
| ピン C2 | ADC0_N — ADC input negative |
| ピン D1 | CLK_P — Clock input positive |
| ピン D2 | CLK_N — Clock input negative |
| ピン E1 | SYSREF_P — System reference positive |
| ピン E2 | SYSREF_N — System reference negative |
| ピン F1 | SPI_CS — SPI chip select |
| ピン F2 | SPI_CLK — SPI clock |
主な用途
AD9082BBCZ の用途: 6 件s: 5G NR Base Stations, Phased Array Radar, Electronic Warfare, Software-Defined Radio, Test and Measurement, Satellite Communications.
5G NR Base Stations
The AD9082BBCZ is ideal for 5G NR base stations, providing direct RF sampling for multiple bands and channels. Its quad 12 GSPS DAC and dual 6 GSPS ADC support massive MIMO and carrier aggregation, reducing system complexity and power consumption. The on-chip PLL and JESD204B/C interface simplify integration with baseband processors, enabling high data throughput and low latency.
おすすめ
Phased Array Radar
In phased array radar systems, the AD9082BBCZ enables direct RF sampling of multiple channels, improving target detection and beamforming accuracy. Its high sample rates and multichip synchronization support coherent processing across many elements. The device's flexible datapath and DSP blocks allow real-time calibration and adaptive beamforming, enhancing radar performance in dynamic environments.
おすすめ
Electronic Warfare
The AD9082BBCZ is well-suited for electronic warfare systems that require wideband signal detection and jamming. Its dual 6 GSPS ADC captures a broad spectrum, while the quad 12 GSPS DAC generates agile jamming signals. The device's fast reconfiguration and bypassable DSP blocks enable rapid response to changing threats, making it a critical component in modern defense electronics.
おすすめ
Software-Defined Radio
In software-defined radios, the AD9082BBCZ provides a flexible RF front-end that can be reconfigured for different frequency bands and waveforms. Its direct RF sampling eliminates multiple conversion stages, reducing size, weight, and power. The device's JESD204B/C interface connects seamlessly to FPGAs, enabling software-defined modulation and demodulation for military and commercial communications.
おすすめ
Test and Measurement
The AD9082BBCZ is used in high-end test equipment such as arbitrary waveform generators and spectrum analyzers. Its 12 GSPS DAC generates wideband signals with high fidelity, while the 6 GSPS ADC captures fast transients. The device's on-chip DSP enables real-time signal processing, making it ideal for automated test systems that require precise, repeatable measurements.
おすすめ
Satellite Communications
For satellite communication ground stations, the AD9082BBCZ supports wideband multi-carrier operation, enabling high-throughput links. Its direct RF sampling reduces the need for multiple downconverters, simplifying the RF chain. The device's multichip synchronization ensures coherent processing across multiple channels, which is essential for phased array antennas and beamforming in satellite systems.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: AD9082BBCZ — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | AD9082BBPZ-2D2AC | AD9081BBCZ | AD9174BBCZ |
|---|---|---|---|---|
| Package | 324-BGA-ED (15x15) | 324-BGA-ED (15x15) | 324-BGA-ED (15x15) | 324-BGA-ED (15x15) |
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| DAC Resolution | 16-bit | 16-bit | 16-bit | 16-bit |
| DAC Sample Rate | 12 GSPS | 12 GSPS | 12 GSPS | 12.6 GSPS |
| ADC Resolution | 12-bit | 12-bit | 12-bit | N/A (DAC only) |
| ADC Sample Rate | 6 GSPS | 6 GSPS | 6 GSPS | N/A (DAC only) |
| Number of DACs | 4 | 4 | 4 | 4 |
| Number of ADCs | 2 | 2 | 4 | 0 |
主な差別化要因
- Integrated quad DAC and dual ADC in one package （vs AD9174BBCZ)
- Higher ADC channel count （vs AD9082BBPZ-2D2AC)
- Direct RF sampling capability （vs AD9174BBCZ)
設計ノート
The AD9082BBCZ requires multiple power supply rails with low noise and good decoupling. Use ferrite beads and 10uF + 0.1uF capacitors on each supply pin. Ensure the analog and digital supplies are properly separated to avoid noise coupling. Refer to the datasheet for recommended supply sequencing.
The AD9082BBCZ dissipates significant power, especially at high sample rates. Use a thermal pad and adequate PCB copper area for heat sinking. The 324-BGA-ED package has an exposed pad that must be soldered to a thermal via array. Monitor junction temperature to stay within the -40°C to +85°C operating range.
For high-speed JESD204B/C interfaces, maintain controlled impedance traces (typically 100 ohm differential) and keep trace lengths matched. Place the device close to the FPGA to minimize skew. Use ground planes under the device and avoid routing high-speed signals over split planes.
コンプライアンス情報
RoHS compliant per Analog Devices product page. Other compliance data not specified in provided sources.
