Analog Devices

AD9260AS - 16-Bit 2.5 MSPS CMOS ADC | Analog Devices

部品番号: AD9260AS ✓ 生産中
+5 V Vdss 44-pin MQFP, 10 x 10 mm Package
MOQ: 1 |

AD9260AS 概要

Analog Devices AD9260AS is a 16-bit high-speed oversampling analog-to-digital converter with a 2.5 MHz output word rate, packaged in a 44-pin MQFP measuring 10 x 10 mm. The converter operates from a single +5 V supply, typically consumes 550 mW, and includes a power-scaling circuit that can reduce consumption to 150 mW at reduced clock and data rates. It is designed for wide-bandwidth signal acquisition requiring high dynamic range and oversampled conversion.

An ADC converts continuous analog voltages into digital words for processing, storage, transmission, or control. The AD9260 belongs to the oversampling ADC family and uses an 8-times oversampling ratio to achieve high dynamic range over a broad input bandwidth. This places it in the semiconductor hierarchy of data converters, analog-to-digital converters, and signal-chain integrated circuits, where it can serve as the bridge between an analog front end and downstream digital logic.

The principal features include 16-bit resolution, a 2.5 MHz output word rate, advanced CMOS construction, and an 8-times oversampling architecture. The single +5 V supply simplifies system power planning, while the scaling circuit provides a path to lower power consumption when the required clock and data rates are reduced. The industrial-temperature version and 44-pin MQFP package support robust equipment designs requiring a conventional surface-mount interface.

Internally, the oversampling architecture uses analog and digital filtering characteristics to improve conversion performance relative to the sampling rate. The converter requires careful treatment of its analog input, clock, supply, and digital output paths. Because converter performance depends on signal-chain balance, reference behavior, clock jitter, and output-impedance loading, layout and component selection can be as important as the nominal converter specifications.

Typical uses include communications equipment, instrumentation, industrial measurement, medical signal acquisition, and embedded processing systems. In each case, AD9260AS is useful when a compact 16-bit conversion stage is needed at a 2.5 MHz word rate without moving to a substantially more complex parallel-output architecture.

Design around the 44-pin MQFP footprint using the manufacturer pin-description table, and place the supporting input, clock, and decoupling networks according to the recommended application circuit. Keep high-speed digital traces short, provide a controlled return path, and verify the analog input bandwidth and settling behavior for the intended source impedance.

This page organizes the confirmed AD9260AS specifications, package information, sourcing questions, verified drop-in relationships, application guidance, and engineering design notes. It also distinguishes documented device characteristics from parameters that must be confirmed in the manufacturer datasheet before layout or production release.

ドロップイン代替品: AD9260AS — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。

AD9260ASZ

✅ ドロップイン
📦 MQFP-44 (10 x 10 mm)
Same 44-pin MQFP conversion-stage package and core 16-bit ADC function; ordering-suffix attributes require confirmation for finish, temperature, or traceability requirements.

📋 参考代替品(カタログ未掲載)

AD9260ASRL

✅ ドロップイン
📦 MQFP-44 (10 x 10 mm)
Same 44-pin MQFP package and consistent principal conversion characteristics; the RL ordering suffix may change delivery packaging and must be checked against assembly requirements.

📋 参考代替品(カタログ未掲載)

AD9260AS 最大定格&電気的特性

Converter Type 16-bit high-speed oversampling ADC
分解能 16 bit
Output Word Rate 2.5 MHz
Oversampling Ratio 8x
電源電圧 +5 V
Typical Power Consumption 550 mW
Minimum Scalable Power Consumption 150 mW at reduced clock and data rates
Process Technology Advanced CMOS
パッケージ 44-pin MQFP, 10 x 10 mm
実装タイプ Surface mount
RoHS ステータス unknown
REACH Status unknown
AEC-Q100 Qualification not_applicable

AD9260AS 44-pin mqfp, 10 x 10 mm ピン配置ガイド

AD9260AS (44-pin mqfp, 10 x 10 mm パッケージ) のピン配置。 このアナログコンポーネントは、入力、出力、および電源ピンを備えています。オフセットナル、補償、イネーブルピンの設定については、メーカーのデータシートを参照してください。信号調整やアンプ回路に最適です。

AD9260AS の 44-pin mqfp, 10 x 10 mm パッケージピン配置図

詳細なピン配置データはありません: AD9260AS.

詳細は データシート をご参照ください。

主な用途

AD9260AS の用途: 6 件s: Communications Receiver, Industrial Signal Acquisition, Medical Monitoring Equipment, Precision Instrumentation, Audio and Waveform Capture, Embedded Control and Monitoring.

🌐

Communications Receiver

AD9260AS suits communications receiver front ends that require 16-bit conversion at a 2.5 MHz output word rate. Its 8-times oversampling architecture supports high dynamic range over a wide bandwidth, while the single +5 V supply simplifies receiver-board power planning. Place the converter after the RF mixer or channel-filter network, and design the clock and parallel output routing to prevent timing degradation. The principal benefit is the combination of a 16-bit digital word and a conventional 44-pin MQFP interface; the design trade-off is that a 2.5 MHz word rate may not match newer high-rate converter architectures.

🏭

Industrial Signal Acquisition

AD9260AS is appropriate for industrial acquisition systems that sample sensor outputs while retaining 16-bit numerical resolution. Its industrial-temperature specification and 550 mW typical consumption are useful for compact measurement equipment operating from a single +5 V rail. Use the converter behind the analog front end and anti-alias filter, with controlled input settling and a clean clock source. The 2.5 MHz output word rate supports substantial real-time bandwidth, although applications requiring higher throughput must evaluate a faster converter.

💊

Medical Monitoring Equipment

AD9260AS can be used in medical monitoring and diagnostic instrumentation when its 16-bit resolution and 2.5 MHz output word rate cover the required physiological bandwidth. It is typically positioned after sensor conditioning, instrumentation amplification, and anti-alias filtering so that the ADC receives a settled bipolar or unipolar signal within its input range. The single +5 V supply simplifies analog power distribution, while the power-scaling circuit offers lower consumption at reduced rates. System designers must still implement appropriate patient protection, isolation, validation, and regulatory controls.

🔧

Precision Instrumentation

AD9260AS fits laboratory and process instrumentation requiring accurate conversion of moderately high-bandwidth analog signals. Its 16-bit resolution preserves fine numerical detail, and the 8-times oversampling architecture is intended to provide exceptional dynamic range over a wide bandwidth. The converter should follow low-noise amplification and filtering stages, while its digital outputs connect to a controller or FPGA through timing-conscious routing. Compared with a lower-resolution converter, AD9260AS supports more precise measurements; compared with a much faster ADC, it offers a simpler 2.5 MHz word-rate design point.

🎧

Audio and Waveform Capture

AD9260AS can capture audio and general-purpose waveform signals when the required bandwidth is consistent with its 2.5 MHz output word rate. The 16-bit conversion resolution provides useful dynamic range for waveform analysis, while the wide-band oversampling architecture targets clean acquisition across the supported analog bandwidth. Use a dedicated anti-alias filter, low-noise input stage, and controlled clock routing to prevent out-of-band energy and timing errors from limiting capture quality. This application benefits from the simple +5 V supply, though very high-rate waveform capture requires a faster output interface and converter.

🖥️

Embedded Control and Monitoring

AD9260AS can feed an embedded controller in power-monitoring, condition-monitoring, and factory-test systems where 16-bit conversion data is required at a moderate rate. The 2.5 MHz output word rate allows substantial acquisition throughput, and the 44-pin MQFP package provides a manageable surface-mount interface for multilayer boards. Place the converter near the conditioned sensor input, use a low-jitter clock, and account for digital-output loading when connecting the bus to an FPGA or processor. For low-power operation, the scaling circuit can reduce converter consumption toward 150 mW at reduced rates.

おすすめ製品の概要

AD9260AS Analog Devices 使用用途: Communications Receiver, Industrial Signal Acquisition, Medical Monitoring Equipment, Precision Instrumentation, Audio and Waveform Capture, Embedded Control and Monitoring AD9260ASZ Same-family 44-pin MQFP conversion option 使用用途: Communications Receiver, Industrial Signal Acquisition, Precision Instrumentation, Embedded Control and Monitoring AD9260ASRL Same-package conversion option 使用用途: Medical Monitoring Equipment, Audio and Waveform Capture
What is the AD9260AS?
The AD9260AS is a 16-bit high-speed oversampling analog-to-digital converter manufactured by Analog Devices on an advanced CMOS process. According to the manufacturer product page, it provides a 2.5 MHz output word rate, operates from a single +5 V supply, and is available in a 44-pin MQFP package. It is intended for high-dynamic-range, wide-bandwidth signal-acquisition systems.
What is the operating voltage of AD9260AS?
The AD9260AS operates from a single +5 V supply. The manufacturer product page identifies +5 V as the device supply and states that typical power consumption is 550 mW. Its internal power-scaling circuit can reduce consumption to 150 mW when lower clock and data rates are used. Other supply rails, tolerances, and sequencing requirements should be confirmed from the manufacturer datasheet.
What is the output word rate of AD9260AS?
The AD9260AS provides a 2.5 MHz output word rate with 16-bit conversion resolution. This means it can generate up to 2.5 million digital output words per second under its specified operating conditions. The Analog Devices product page identifies the AD9260 as an 8-times oversampled converter, combining the nominal output rate with digital filtering to obtain high dynamic range over a wide bandwidth.
Where can I download the AD9260AS datasheet PDF?
The AD9260AS datasheet and product information are available through the official Analog Devices AD9260 product page at https://www.analog.com/en/products/ad9260.html. Open the Technical Documentation section to locate the current data sheet and related application material. Use the manufacturer document tied to the exact ordering code and package when assigning pins, selecting support components, or approving production releases.
Where can I find the AD9260AS pinout?
The AD9260AS pinout is defined by the manufacturer datasheet because the converter is supplied in a 44-pin MQFP package with analog, clock, control, power, and digital-output functions distributed across the package. Use the pin-description table in the official AD9260 documentation when creating the schematic symbol and PCB footprint. Do not infer missing connections from the package outline or a third-party diagram.
What is the power consumption of AD9260AS?
The AD9260AS typically consumes 550 mW when operating from its single +5 V supply. According to the Analog Devices product page, a power-scaling circuit allows operation at power levels as low as 150 mW when the clock and data rates are reduced. Actual board-level consumption varies with clock frequency, data activity, supply efficiency, thermal conditions, and the selected operating mode.
Is AD9260AS suitable for industrial applications?
Yes, the AD9260AS is specified for the industrial temperature range and is packaged in a 44-pin MQFP suitable for surface-mount assembly. Its 16-bit resolution and 2.5 MHz output word rate support precision industrial acquisition, instrumentation, and communications systems. Exact temperature limits and environmental qualification details should be taken from the manufacturer datasheet for the specific ordering option.
AD9260AS vs AD9260ASZ - which is the better drop-in choice?
AD9260ASZ is the closest verified same-package alternative because the manufacturer documentation identifies it as a 44-pin MQFP variant with the same core AD9260 conversion function. The distinguishing ordering suffix should be checked for temperature, finish, and ordering-code requirements rather than treated as a universally identical part. Confirm that the exact package dimensions and pin assignments match before using it as a replacement.
When should I choose AD9260AS over AD9260ASZ?
Choose AD9260AS when it matches the required ordering code, environmental grade, component finish, and sourcing configuration for the design. Choose AD9260ASZ when its documented ordering attributes satisfy the PCB and assembly requirements while retaining the same 44-pin MQFP conversion-stage footprint. The final choice should follow a line-by-line comparison of the manufacturer ordering guide and datasheet, not only the base device name.
Is AD9260AS suitable for a medical acquisition system?
AD9260AS can form the conversion stage of a medical acquisition system when its 16-bit resolution, 2.5 MHz output word rate, and analog characteristics match the sensor bandwidth and signal-to-noise requirements. The system must also provide suitable input protection, isolation strategy, anti-alias filtering, and reference design. Medical regulatory validation remains a system-level requirement rather than an automatic device qualification.
What can replace AD9260AS?
AD9260ASZ is the closest verified drop-in candidate identified for the AD9260 because it retains the 44-pin MQFP package and the same 16-bit converter architecture. No verified cross-manufacturer part was established with the same package, pinout, resolution, and operating parameters. A replacement should therefore be approved only after checking the package drawing, pin table, electrical limits, clock requirements, and lifecycle status.
Is AD9260AS the same as AD9260ASRL?
AD9260AS and AD9260ASRL are related ordering options for the AD9260 converter family, but they should not be treated as automatically interchangeable. The verified comparison describes consistent terminals, packages, and principal performance characteristics, while the suffix may identify packaging or ordering differences. Review the manufacturer ordering guide for reel, finish, temperature, and traceability requirements before substitution.
What are the key specifications of AD9260AS that engineers should know?
The key AD9260AS specifications are 16-bit resolution, a 2.5 MHz output word rate, an 8-times oversampling ratio, single +5 V operation, and a 44-pin MQFP package. Typical power consumption is 550 mW, with a power-scaling path stated down to 150 mW at reduced clock and data rates. The Analog Devices product page also identifies advanced CMOS construction and industrial-temperature operation.
Where can I buy AD9260AS and check its current lead time?
Use the Request a Quote form on this page to request AD9260AS availability, current pricing, lead time, and order quantities for the exact suffix and package required. The available listing data does not provide a qualified quantity-break schedule for AD9260AS, so no static commercial figures are published here. Provide the target quantity and assembly packaging requirements when requesting the quotation.
How should the AD9260AS clock and power rails be laid out?
Place the AD9260AS clock, supply-decoupling, analog-input, and digital-output circuits according to the recommended application diagram in the manufacturer documentation. Keep the 44-pin MQFP device close to its local decoupling and route clock and digital outputs away from sensitive analog inputs. Maintain a continuous ground reference and verify the final stack-up and controlled-impedance requirements with signal-integrity analysis.

エンジニアリング参考データ: AD9260AS — 比較、設計ガイダンス、コンプライアンス情報。

選定ガイド

Choose AD9260AS for a new 44-pin MQFP design requiring 16-bit conversion, a 2.5 MHz output word rate, and single +5 V operation. It is particularly suitable for communications, industrial acquisition, instrumentation, and monitoring systems whose bandwidth is compatible with the converter. AD9260ASZ is the closest verified same-package alternative when its ordering and finish attributes satisfy the assembly requirements. AD9260ASRL can be considered when the same electrical function and package are needed and its delivery format matches production. Neither alternative should be substituted without checking the manufacturer ordering guide, pin table, package drawing, temperature grade, and lifecycle status. No cross-manufacturer drop-in alternative was established, so changing vendors may require a redesigned interface and renewed signal-integrity validation.

代替品との比較

パラメータ この製品 AD9260ASZ AD9260ASRL
Brand Analog Devices Analog Devices Analog Devices
Package MQFP-44 (10 x 10 mm) MQFP-44 (10 x 10 mm) - same package MQFP-44 (10 x 10 mm) - same package
Resolution 16 bit 16 bit 16 bit
Output Word Rate 2.5 MHz 2.5 MHz 2.5 MHz
Supply Voltage +5 V +5 V +5 V
Oversampling Ratio 8x 8x 8x
Process Technology Advanced CMOS Advanced CMOS Advanced CMOS

主な差別化要因

  • Same 44-pin MQFP interface for direct PCB substitution (vs AD9260ASZ)
  • 16-bit resolution at a 2.5 MHz output word rate (vs AD9260ASRL)
  • Single +5 V operation with selectable power scaling (vs AD9260ASZ)

設計ノート

Use the manufacturer application circuit and pin-description table as the authority for the 44-pin MQFP layout. Place local supply-decoupling capacitors adjacent to the device, preserve a low-impedance ground connection, and separate the analog input and clock routing from the parallel digital outputs. Because the MQFP footprint is not represented by a dedicated diagram in the available package library, verify every land pattern against the official package drawing before fabrication.

Treat the AD9260 clock and 16-bit output interface as high-speed digital nets. Route clock traces with short paths and continuous references, avoid unnecessary stubs, and account for receiver threshold, trace length, and loading when terminating the outputs. The available product information identifies a 2.5 MHz output word rate but does not state the maximum analog input frequency or digital timing limits; confirm those values in the manufacturer datasheet before setting impedance or timing constraints.

Estimated: at the documented single +5 V supply and typical device consumption of 550 mW, the device-side supply current is approximately 110 mA using I = P/V. This estimate excludes the input current of external support components and board-level conversion losses. Provide local decoupling and a supply path sized for the confirmed operating mode, particularly when the power-scaling circuit is used to approach the documented 150 mW consumption at reduced clock and data rates.

Do not treat AD9260AS, AD9260ASZ, and AD9260ASRL as interchangeable solely because they share the AD9260 family name. Verify the ordering guide for package, temperature grade, component finish, reel or tube format, and traceability requirements. Also avoid selecting the converter before confirming that 2.5 MHz output word rate, analog input range, and input bandwidth satisfy the system signal requirements.

コンプライアンス情報

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
鉛フリー
Unknown
ハロゲンフリー
Unknown
紛争鉱物
Unknown

The available manufacturer product information does not state the requested compliance and finish attributes. Confirm RoHS, REACH, lead-free, halogen-free, and conflict-minerals status for the exact ordering code through the manufacturer product documentation before release.

データ検証日: 2026-11-10 — データはXAIPARTの部品エンジニアリングチームによって検証・管理されています

関連検索

AD9260AS datasheet AD9260AS specifications AD9260AS pinout AD9260AS datasheet pdf AD9260AS 44 pin MQFP AD9260AS 2.5 MHz ADC AD9260AS application circuit AD9260AS vs AD9260ASZ AD9260AS vs AD9260ASRL AD9260AS equivalent AD9260AS replacement AD9260AS price AD9260AS stock Analog Devices AD9260AS

関連部品&用語

Analog Devices AD9260AS AD9260ASZ AD9260ASRL AD9260 analog-to-digital converter ADC oversampling ADC data converter signal-chain integrated circuit semiconductor 16-bit resolution 2.5 MHz output word rate 8x oversampling ratio advanced CMOS process single +5 V supply power scaling circuit dynamic range MQFP-44 10 x 10 mm package surface mount industrial temperature range anti-alias filtering clock jitter parallel digital output
クイック見積RFQ
詳細をすべてご記入ください — 営業チームが24時間以内にご返信いたします
部品番号 メーカー パッケージ QTY 目標価格 小計
✓
見積を送信しました!

24時間以内にメールでご返信いたします

1
RFQ送信済み
2
見積受領
3
注文済み
4
お支払い
5
発送済み
6
配達済み
RFQの詳細を表示