AD9524BCPZ - 6-Output Clock Generator | Analog Devices
部品番号: AD9524BCPZ ✗ 生産終了AD9524BCPZ 概要
A clock generator is a clock-and-timing IC that establishes a stable reference frequency, multiplies or divides that frequency through an internal phase-locked loop, and distributes the resulting clocks to other circuits. Within the broader semiconductor hierarchy, the AD9524 belongs to clock and timing ICs and ultimately supports power-management, communications, and signal-processing systems. Differential clock outputs improve noise immunity and timing performance in high-speed digital equipment.
The AD9524BCPZ provides six outputs and an integrated VCO with a 3.6 GHz to 4.0 GHz tuning range. Listed logic formats include HSTL, LVCMOS, LVDS, and LVPECL, with differential operation highlighted in the product description. The zero-delay receiver architecture allows the device to combine reference jitter cleanup, frequency generation, and low-skew clock distribution in one package rather than requiring several separate clock components.
The AD9524 is intended for Ethernet, Fibre Channel, SONET/SDH, and related high-speed infrastructure. It can also support data converters requiring deterministic sampling clocks. The product page identifies the device as “NOT RECOMMENDED FOR NEW DESIGNS,” making it primarily suitable for maintaining an existing platform, repairing deployed equipment, or producing a controlled transition to a currently recommended clock-generation solution.
The AD9524BCPZ is especially relevant to legacy telecommunications equipment, optical-network clock trees, instrumentation, and precision data-acquisition systems. Using one multi-output device can reduce the number of separate buffers and distribution stages while simplifying clock-tree synchronization. The external reference path and programmable PLL remain important when phase-noise behavior, reference jitter, or output frequency must be controlled precisely.
Clock-generator layouts demand short, impedance-controlled connections, carefully terminated differential pairs, and a quiet reference network. Decoupling should follow the datasheet’s recommended capacitor values and placement, while the exposed-pad area requires uninterrupted ground-plane copper for electrical and thermal performance. Review output-termination requirements for each HSTL, LVCMOS, LVDS, or LVPECL interface before finalizing the board design.
This product page combines the manufacturer’s lifecycle status, package information, clock-output capabilities, VCO range, and supported logic formats with practical replacement and board-level guidance. It also distinguishes the exact AD9524BCPZ orderable from related evaluation-board and reel-packed listings, helping engineers confirm the correct device before requesting supply or undertaking a redesign.
ドロップイン代替品: AD9524BCPZ — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
この製品に利用可能なドロップイン代替品はありません。
代替品をリクエストAD9524BCPZ 仕様
| Product Type | Multi-output clock generator and jitter-cleaning device |
| 出力数 | 6 outputs |
| 最大クロック周波数 | 1 GHz |
| Internal VCO Tuning Range | 3.6 GHz to 4.0 GHz |
| Internal PLL | Integrated |
| Internal VCO | Integrated |
| Supported Logic Formats | HSTL, LVCMOS, LVDS, and LVPECL |
| Differential Output Support | Yes |
| Reference Input Architecture | Single-ended or differential operation |
| パッケージ | 48-LFCSP-VQ, 7 mm x 7 mm |
| 実装タイプ | Surface mount |
| Exposed Thermal Pad | Yes |
| Shipping Format | Tray |
| Lifecycle Recommendation | Not recommended for new designs |
AD9524BCPZ 48-lfcsp-vq, 7 mm x 7 mm ピン配置ガイド
AD9524BCPZ (48-lfcsp-vq, 7 mm x 7 mm パッケージ) のピン配置。 ピン番号、機能、接続図はメーカーのデータシートで定義されています。正確なフットプリントとはんだ付けのガイドラインについては、データシートを参照してください。
詳細なピン配置データはありません: AD9524BCPZ.
詳細は データシート をご参照ください。
主な用途
AD9524BCPZ の用途: 6 件s: Ethernet Clock Distribution, Fibre Channel Timing, SONET and SDH Clocking, Precision Data-Converter Clocking, High-Speed Instrumentation, Legacy Communication Equipment Repair.
Ethernet Clock Distribution
The AD9524BCPZ is suitable for generating and distributing related clocks in Ethernet equipment because it combines a phase-locked loop, a 3.6 GHz to 4.0 GHz internal VCO, and six outputs in one 48-LFCSP-VQ package. Its HSTL, LVCMOS, LVDS, and LVPECL output options allow different interface sections to be supported from a controlled clock source. The device is particularly useful in established Ethernet designs requiring multiple synchronized clocks or reference jitter cleanup. Because the part is not recommended for new designs, its strongest role is maintaining or repairing installed platforms rather than defining a new product architecture.
おすすめ
Fibre Channel Timing
The AD9524BCPZ can form the central timing element of a Fibre Channel clock tree by deriving multiple related clocks from a stable reference and distributing them through its six outputs. Differential LVDS or LVPECL outputs are appropriate for high-speed backplanes where clock-edge quality and common-mode control are important. Its integrated VCO and PLL reduce the number of separate frequency-generation blocks required in an established system. Designers should use the manufacturer data sheet to confirm divider ratios, output-drive settings, termination values, and jitter performance against the Fibre Channel channel budget.
おすすめ
SONET and SDH Clocking
The AD9524BCPZ is identified for SONET/SDH clock-generation and distribution applications, where consistent phase relationships and low-jitter clocks are required across multiple functional blocks. Six independently configurable outputs support a centralized clock architecture, while the integrated PLL and VCO offer flexibility in deriving operating frequencies. Differential output modes can improve signal integrity on controlled-impedance printed-circuit-board traces. For production designs, verify the exact output frequency plans, reference requirements, jitter limits, and clock-recovery behavior against the applicable system specification before approving the clock tree.
おすすめ
Precision Data-Converter Clocking
The AD9524BCPZ can supply deterministic sampling and reference clocks to precision data-conversion systems because it combines PLL multiplication, reference jitter cleanup, and low-skew distribution. The six-output architecture can serve multiple converter channels from a common synchronization domain, reducing clock skew between sampling stages. Differential clocking and selectable logic standards help match converter and interface requirements. System designers must calculate the complete clock-tree budget, including oscillator contribution, PLL multiplication factor, divider noise, output jitter, channel-to-channel skew, and data-converter aperture requirements.
おすすめ
High-Speed Instrumentation
The AD9524BCPZ fits legacy high-speed test and measurement equipment that needs multiple coherent clocks for acquisition, triggering, conversion, or digital processing. A single device can organize the clock tree around one PLL and VCO, which simplifies synchronization compared with several unrelated oscillator-and-divider chains. Its LVPECL and LVDS options support short-reach, high-speed links when configured with the correct termination and board geometry. Verify input-reference sensitivity, output amplitude, deterministic jitter, and temperature stability during instrument-level calibration, and preserve the manufacturer’s recommended grounding and decoupling layout.
おすすめ
Legacy Communication Equipment Repair
The AD9524BCPZ is especially useful for repairing communication equipment built around the original AD9524 footprint. A replacement must match the 48-LFCSP-VQ pinout, exposed-pad connection, supply arrangement, clock-output configuration, and digital-control behavior, rather than merely providing the same clock frequency. The tray-packed AD9524BCPZ is the exact orderable identified for the target installation, subject to quotation and lifecycle confirmation. During repair, compare all device straps, reference connections, output terminations, and register programming against the original design to avoid subtle startup or phase-alignment faults.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: AD9524BCPZ — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 |
|---|---|
| Brand | Analog Devices |
| Package | 48-LFCSP-VQ, 7 mm x 7 mm |
| Number of Outputs | 6 outputs |
| Maximum Clock Frequency | 1 GHz |
| Internal VCO Range | 3.6 GHz to 4.0 GHz |
| Supported Logic Formats | HSTL, LVCMOS, LVDS, and LVPECL |
| PLL and VCO | Integrated |
| Lifecycle Recommendation | Not recommended for new designs |
| Shipping Format | Tray |
主な差別化要因
- Combines six outputs with integrated PLL and VCO (vs AD9524BCPZ-REEL7)
- Supports four principal clock logic formats (vs AD9524/PCBZ)
- Explicitly identified for established communications clock trees (vs AD9523BCPZ)
設計ノート
Treat every differential clock output as a controlled-impedance pair with matched length and symmetric geometry. Route the outputs away from noisy switching nodes and use the termination scheme specified for the selected HSTL, LVCMOS, LVDS, or LVPECL mode. Keep the reference and feedback paths short, and avoid routing them beneath clock outputs or switching-power circuits to reduce coupling into the PLL and degradation of phase noise.
Provide continuous ground-plane copper beneath the 48-LFCSP-VQ exposed thermal pad and use the manufacturer’s recommended via pattern for thermal and electrical connections. Place input, output, and PLL decoupling capacitors close to their associated pins with short ground returns. Verify the selected capacitor technology, voltage rating, and effective capacitance at the operating frequency before releasing the PCB layout.
Do not treat the AD9524/PCBZ evaluation-board listing as a substitute for the AD9524BCPZ integrated circuit, and do not confuse the exact tray-packed AD9524BCPZ with AD9524BCPZ-REEL7 shipping format. Also avoid assuming that a similarly named AD9523 or AD9522-3 device is pin compatible. Confirm the complete orderable code, package drawing, exposed-pad connection, supply pins, and output functions before procurement or board rework.
Validate the complete clock path with the actual output mode enabled. Check edge rate, amplitude, ringing, duty-cycle distortion, and differential skew at the receiver rather than relying only on nominal output frequency. A clean generator result can still become marginal after connector launches, vias, unequal terminations, or impedance discontinuities. Use controlled-impedance stackup constraints and keep clock nets away from parallel high-speed data aggressors where possible.
コンプライアンス情報
The AD9524 product is a communications clock-and-timing IC rather than an automotive-qualified device. Compliance attributes not explicitly published in the cited product information are recorded as unknown.