Analog Devices

AD9524BCPZ - 6-Output Clock Generator | Analog Devices

MPN: AD9524BCPZ ✗ סוף ייצור
48-LFCSP-VQ, 7 mm x 7 mm Package 1 GHz Speed
כמות הזמנה מינימלית: 1 |

AD9524BCPZ סקירה

Analog Devices AD9524BCPZ is a low-power, multi-output clock distribution device with six clock outputs, an integrated PLL and VCO, and a 48-LFCSP-VQ package measuring 7 mm by 7 mm. Its internal VCO tunes from 3.6 GHz to 4.0 GHz, while the device supports clock-generation, distribution, fanout, and jitter-cleaning functions for demanding communications and data-conversion systems.

A clock generator is a clock-and-timing IC that establishes a stable reference frequency, multiplies or divides that frequency through an internal phase-locked loop, and distributes the resulting clocks to other circuits. Within the broader semiconductor hierarchy, the AD9524 belongs to clock and timing ICs and ultimately supports power-management, communications, and signal-processing systems. Differential clock outputs improve noise immunity and timing performance in high-speed digital equipment.

The AD9524BCPZ provides six outputs and an integrated VCO with a 3.6 GHz to 4.0 GHz tuning range. Listed logic formats include HSTL, LVCMOS, LVDS, and LVPECL, with differential operation highlighted in the product description. The zero-delay receiver architecture allows the device to combine reference jitter cleanup, frequency generation, and low-skew clock distribution in one package rather than requiring several separate clock components.

The AD9524 is intended for Ethernet, Fibre Channel, SONET/SDH, and related high-speed infrastructure. It can also support data converters requiring deterministic sampling clocks. The product page identifies the device as “NOT RECOMMENDED FOR NEW DESIGNS,” making it primarily suitable for maintaining an existing platform, repairing deployed equipment, or producing a controlled transition to a currently recommended clock-generation solution.

The AD9524BCPZ is especially relevant to legacy telecommunications equipment, optical-network clock trees, instrumentation, and precision data-acquisition systems. Using one multi-output device can reduce the number of separate buffers and distribution stages while simplifying clock-tree synchronization. The external reference path and programmable PLL remain important when phase-noise behavior, reference jitter, or output frequency must be controlled precisely.

Clock-generator layouts demand short, impedance-controlled connections, carefully terminated differential pairs, and a quiet reference network. Decoupling should follow the datasheet’s recommended capacitor values and placement, while the exposed-pad area requires uninterrupted ground-plane copper for electrical and thermal performance. Review output-termination requirements for each HSTL, LVCMOS, LVDS, or LVPECL interface before finalizing the board design.

This product page combines the manufacturer’s lifecycle status, package information, clock-output capabilities, VCO range, and supported logic formats with practical replacement and board-level guidance. It also distinguishes the exact AD9524BCPZ orderable from related evaluation-board and reel-packed listings, helping engineers confirm the correct device before requesting supply or undertaking a redesign.

חלופות תחליף ישיר עבור AD9524BCPZ — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.

אין חלופות תואמות Drop-in עבור מוצר זה.

בקשת חלופות

AD9524BCPZ מפרטים

Product Type Multi-output clock generator and jitter-cleaning device
מספר יציאות 6 outputs
תדר שעון מקסימלי 1 GHz
Internal VCO Tuning Range 3.6 GHz to 4.0 GHz
Internal PLL Integrated
Internal VCO Integrated
Supported Logic Formats HSTL, LVCMOS, LVDS, and LVPECL
Differential Output Support Yes
Reference Input Architecture Single-ended or differential operation
מארז 48-LFCSP-VQ, 7 mm x 7 mm
סוג הרכבה Surface mount
Exposed Thermal Pad Yes
Shipping Format Tray
Lifecycle Recommendation Not recommended for new designs

מדריך תצורת פינים של AD9524BCPZ 48-lfcsp-vq, 7 mm x 7 mm

תצורת פינים עבור AD9524BCPZ (מארזת 48-lfcsp-vq, 7 mm x 7 mm). מספרי פינים, פונקציות ותרשימי חיבורים מוגדרים ב-Datasheet של היצרן. יש לעיין בו לקבלת ה-footprint המדויק והנחיות הלחמה.

תרשים פינים של מארזת 48-lfcsp-vq, 7 mm x 7 mm עבור AD9524BCPZ

אין נתוני פריסת פינים מפורטים עבור AD9524BCPZ.

עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.

יישומים טיפוסיים

AD9524BCPZ מתאים עבור 6 יישוםs: Ethernet Clock Distribution, Fibre Channel Timing, SONET and SDH Clocking, Precision Data-Converter Clocking, High-Speed Instrumentation, Legacy Communication Equipment Repair.

🌐

Ethernet Clock Distribution

The AD9524BCPZ is suitable for generating and distributing related clocks in Ethernet equipment because it combines a phase-locked loop, a 3.6 GHz to 4.0 GHz internal VCO, and six outputs in one 48-LFCSP-VQ package. Its HSTL, LVCMOS, LVDS, and LVPECL output options allow different interface sections to be supported from a controlled clock source. The device is particularly useful in established Ethernet designs requiring multiple synchronized clocks or reference jitter cleanup. Because the part is not recommended for new designs, its strongest role is maintaining or repairing installed platforms rather than defining a new product architecture.

🌐

Fibre Channel Timing

The AD9524BCPZ can form the central timing element of a Fibre Channel clock tree by deriving multiple related clocks from a stable reference and distributing them through its six outputs. Differential LVDS or LVPECL outputs are appropriate for high-speed backplanes where clock-edge quality and common-mode control are important. Its integrated VCO and PLL reduce the number of separate frequency-generation blocks required in an established system. Designers should use the manufacturer data sheet to confirm divider ratios, output-drive settings, termination values, and jitter performance against the Fibre Channel channel budget.

🌐

SONET and SDH Clocking

The AD9524BCPZ is identified for SONET/SDH clock-generation and distribution applications, where consistent phase relationships and low-jitter clocks are required across multiple functional blocks. Six independently configurable outputs support a centralized clock architecture, while the integrated PLL and VCO offer flexibility in deriving operating frequencies. Differential output modes can improve signal integrity on controlled-impedance printed-circuit-board traces. For production designs, verify the exact output frequency plans, reference requirements, jitter limits, and clock-recovery behavior against the applicable system specification before approving the clock tree.

📡

Precision Data-Converter Clocking

The AD9524BCPZ can supply deterministic sampling and reference clocks to precision data-conversion systems because it combines PLL multiplication, reference jitter cleanup, and low-skew distribution. The six-output architecture can serve multiple converter channels from a common synchronization domain, reducing clock skew between sampling stages. Differential clocking and selectable logic standards help match converter and interface requirements. System designers must calculate the complete clock-tree budget, including oscillator contribution, PLL multiplication factor, divider noise, output jitter, channel-to-channel skew, and data-converter aperture requirements.

🔧

High-Speed Instrumentation

The AD9524BCPZ fits legacy high-speed test and measurement equipment that needs multiple coherent clocks for acquisition, triggering, conversion, or digital processing. A single device can organize the clock tree around one PLL and VCO, which simplifies synchronization compared with several unrelated oscillator-and-divider chains. Its LVPECL and LVDS options support short-reach, high-speed links when configured with the correct termination and board geometry. Verify input-reference sensitivity, output amplitude, deterministic jitter, and temperature stability during instrument-level calibration, and preserve the manufacturer’s recommended grounding and decoupling layout.

🏭

Legacy Communication Equipment Repair

The AD9524BCPZ is especially useful for repairing communication equipment built around the original AD9524 footprint. A replacement must match the 48-LFCSP-VQ pinout, exposed-pad connection, supply arrangement, clock-output configuration, and digital-control behavior, rather than merely providing the same clock frequency. The tray-packed AD9524BCPZ is the exact orderable identified for the target installation, subject to quotation and lifecycle confirmation. During repair, compare all device straps, reference connections, output terminations, and register programming against the original design to avoid subtle startup or phase-alignment faults.

What is the AD9524BCPZ?
The AD9524BCPZ is a six-output clock generator with an integrated PLL and VCO for clock generation, distribution, fanout, and jitter cleanup. Analog Devices describes the device as a low-power, multi-output clock-distribution solution with a 3.6 GHz to 4.0 GHz internal VCO range. It is packaged in a 48-LFCSP-VQ package measuring 7 mm by 7 mm.
How many clock outputs does the AD9524BCPZ provide?
The AD9524BCPZ provides six clock outputs. According to the Analog Devices AD9524 product page, the device combines a PLL, VCO, clock distribution, and zero-delay receiver functions in one package. This makes it useful where several related clocks must be derived and distributed while retaining a common, phase-controlled source.
What is the VCO tuning range of the AD9524BCPZ?
The AD9524BCPZ internal voltage-controlled oscillator tunes from 3.6 GHz to 4.0 GHz. This high tuning range supports generation of high-speed communication clocks and provides the internal frequency source needed for PLL-based multiplication and synthesis. The manufacturer data sheet should be used for PLL-divider combinations, output-frequency limits, and loop-filter calculations.
Which output standards are supported by the AD9524BCPZ?
The AD9524BCPZ supports HSTL, LVCMOS, LVDS, and LVPECL output formats, including differential operation. This range allows the clock outputs to interface with systems using different signaling conventions. Output voltage, termination, and drive settings should be configured according to the manufacturer data sheet and the receiving-device requirements.
Where can I download the AD9524BCPZ datasheet PDF?
The official AD9524BCPZ data sheet can be downloaded from Analog Devices at https://www.analog.com/media/en/technical-documentation/data-sheets/AD9524.pdf. The document is titled AD9524 and carries revision G in the manufacturer product-page listing. Use the PDF for the complete pin description, electrical tables, register map, application circuits, and recommended layout.
Where can I find the AD9524BCPZ pinout?
The AD9524BCPZ pinout is published in the pin-description table of the official AD9524 manufacturer data sheet. The device uses a 48-LFCSP-VQ package with an exposed thermal pad. Because individual pin names are not published in the product-page excerpts, use the manufacturer PDF rather than relying on a third-party package diagram when assigning PCB nets.
Is the AD9524BCPZ suitable for Ethernet and SONET/SDH systems?
Yes, the AD9524BCPZ is specifically identified for Ethernet, Fibre Channel, SONET/SDH, and related high-speed clocking systems. Its six outputs and integrated PLL/VCO make it suitable for central clock trees, jitter cleanup, fanout, and synchronous data-converter clocking. Interface-specific standards and jitter budgets must still be verified for each application.
AD9524BCPZ vs AD9523BCPZ: can one replace the other?
The AD9524BCPZ cannot serve as a direct drop-in replacement for the AD9523BCPZ. The comparison data identifies differences in package size, pin count, output-channel count, and feature set, preventing pin-to-pin PCB compatibility. Treat the AD9523BCPZ and AD9524BCPZ as different devices requiring schematic, pinout, and layout review.
When should I choose the AD9524BCPZ instead of a newer clock generator?
Choose the AD9524BCPZ when maintaining an existing Ethernet, Fibre Channel, SONET/SDH, or precision data-acquisition design and preserving its known clock-tree behavior is more important than starting a new platform. Analog Devices marks the AD9524 as not recommended for new designs. For new systems, evaluate a currently recommended clock generator when equivalent jitter, output, and interface requirements can be met.
What is the best drop-in replacement for the AD9524BCPZ?
No independently verified drop-in replacement for the AD9524BCPZ is identified by the available manufacturer and cross-reference information. The reel-packed AD9524BCPZ-REEL7 is the same electrical orderable in a different shipping format, while AD9524/PCBZ is an evaluation board rather than a substitute IC. Redesign to a currently recommended clock generator rather than assuming an unreviewed cross-reference is safe.
Can an AD9524BCPZ replace an AD9522-3BCPZ?
No direct replacement should be assumed between the AD9524BCPZ and AD9522-3BCPZ. The published comparison identifies product, package, and feature differences that require detailed validation. Because the AD9524BCPZ is a 48-LFCSP-VQ device with six outputs, verify every package dimension, exposed-pad connection, supply requirement, output standard, register behavior, and timing requirement before considering substitution.
Where can I buy the AD9524BCPZ online?
Use the Request a Quote form on this page to request the AD9524BCPZ, current supply status, and order scheduling. The exact AD9524BCPZ is listed in the 48-LFCSP-VQ, 7 mm by 7 mm tray configuration, while other search results may represent reel packaging or an evaluation board. Confirm the complete orderable code and mechanical configuration on the quotation request.
What is the price of the AD9524BCPZ?
Current commercial pricing for the AD9524BCPZ should be requested through the Request a Quote form on this page. Dynamic supply, lifecycle status, package format, and order quantity can affect the final quotation. The form is the appropriate route for obtaining an exact-part price and confirming whether a tray or reel configuration is required.
What is the lead time and stock status for the AD9524BCPZ?
Request current stock, minimum order quantity, and lead time through the Request a Quote form on this page. Analog Devices marks the AD9524 family as not recommended for new designs, so schedule should be confirmed for the exact AD9524BCPZ orderable rather than inferred from unrelated AD9524 variants or evaluation-board availability.
What are the key specifications engineers should know about the AD9524BCPZ?
The key AD9524BCPZ specifications are six clock outputs, an integrated PLL and VCO, a 3.6 GHz to 4.0 GHz VCO tuning range, and support for HSTL, LVCMOS, LVDS, and LVPECL formats. The component uses a 48-LFCSP-VQ package measuring 7 mm by 7 mm and is intended for communications and data-converter clocking. Analog Devices marks it as not recommended for new designs.

נתוני עזר הנדסיים עבור AD9524BCPZ — השוואה, הנחיות תכנון ומידע על תאימות.

מדריך בחירה

Choose the AD9524BCPZ when maintaining an existing Ethernet, Fibre Channel, SONET/SDH, instrumentation, or precision data-conversion design that already depends on its six-output clock architecture and 48-LFCSP-VQ footprint. Its integrated PLL, 3.6 GHz to 4.0 GHz VCO, reference jitter cleanup, and selectable HSTL, LVCMOS, LVDS, and LVPECL outputs can simplify an established clock tree. The principal caveat is lifecycle status: Analog Devices marks the AD9524 as not recommended for new designs. For a new product, evaluate a currently recommended clock generator and perform a complete timing, jitter, power, logic-level, firmware, and PCB migration. Do not use AD9523BCPZ or AD9522-3BCPZ as automatic drop-ins because package, pinout, channel count, and feature differences prevent unqualified substitution.

השוואה עם חלופות

פרמטר מוצר זה
Brand Analog Devices
Package 48-LFCSP-VQ, 7 mm x 7 mm
Number of Outputs 6 outputs
Maximum Clock Frequency 1 GHz
Internal VCO Range 3.6 GHz to 4.0 GHz
Supported Logic Formats HSTL, LVCMOS, LVDS, and LVPECL
PLL and VCO Integrated
Lifecycle Recommendation Not recommended for new designs
Shipping Format Tray

מבדילים עיקריים

  • Combines six outputs with integrated PLL and VCO (לעומתAD9524BCPZ-REEL7)
  • Supports four principal clock logic formats (לעומתAD9524/PCBZ)
  • Explicitly identified for established communications clock trees (לעומתAD9523BCPZ)

הערות תכנון

Treat every differential clock output as a controlled-impedance pair with matched length and symmetric geometry. Route the outputs away from noisy switching nodes and use the termination scheme specified for the selected HSTL, LVCMOS, LVDS, or LVPECL mode. Keep the reference and feedback paths short, and avoid routing them beneath clock outputs or switching-power circuits to reduce coupling into the PLL and degradation of phase noise.

Provide continuous ground-plane copper beneath the 48-LFCSP-VQ exposed thermal pad and use the manufacturer’s recommended via pattern for thermal and electrical connections. Place input, output, and PLL decoupling capacitors close to their associated pins with short ground returns. Verify the selected capacitor technology, voltage rating, and effective capacitance at the operating frequency before releasing the PCB layout.

Do not treat the AD9524/PCBZ evaluation-board listing as a substitute for the AD9524BCPZ integrated circuit, and do not confuse the exact tray-packed AD9524BCPZ with AD9524BCPZ-REEL7 shipping format. Also avoid assuming that a similarly named AD9523 or AD9522-3 device is pin compatible. Confirm the complete orderable code, package drawing, exposed-pad connection, supply pins, and output functions before procurement or board rework.

Validate the complete clock path with the actual output mode enabled. Check edge rate, amplitude, ringing, duty-cycle distortion, and differential skew at the receiver rather than relying only on nominal output frequency. A clean generator result can still become marginal after connector launches, vias, unequal terminations, or impedance discontinuities. Use controlled-impedance stackup constraints and keep clock nets away from parallel high-speed data aggressors where possible.

מידע על תאימות

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
נטול עופרת
Unknown
נטול הלוגנים
Unknown
מינרלים של סכסוך
Unknown

The AD9524 product is a communications clock-and-timing IC rather than an automotive-qualified device. Compliance attributes not explicitly published in the cited product information are recorded as unknown.

הנתונים אומתו בתאריך: 2026-11-19 — נתונים אומתו ונערכו על ידי צוות הנדסת הרכיבים של XAIPART

חיפושים קשורים

AD9524BCPZ datasheet AD9524BCPZ datasheet pdf AD9524BCPZ pinout AD9524BCPZ equivalent AD9524BCPZ replacement AD9524BCPZ price AD9524BCPZ stock AD9524BCPZ vs AD9523BCPZ Analog Devices AD9524BCPZ AD9524BCPZ 6 output clock generator AD9524BCPZ 48-LFCSP-VQ AD9524BCPZ ethernet clock AD9524BCPZ SONET SDH clock AD9524BCPZ LVDS LVPECL output what is AD9524BCPZ

רכיבים ומונחים קשורים

Analog Devices AD9524BCPZ AD9524 AD9524BCPZ-REEL7 AD9524/PCBZ AD9523BCPZ AD9522-3BCPZ clock generator clock and timing IC clock distributor zero-delay buffer phase-locked loop PLL voltage-controlled oscillator VCO jitter cleanup clock fanout 48-LFCSP-VQ QFN family surface-mount package HSTL LVCMOS LVDS LVPECL Ethernet Fibre Channel SONET SDH precision data converter
בקשת הצעת מחיר מהירה
מלא את כל הפרטים — צוות המכירות שלנו יגיב תוך 24 שעות
מספר חלק יצרן מארז QTY מחיר יעד סה"כ
✓
הצעת המחיר נשלחה!

נשיב לדוא"ל שלך בתוך 24 שעות

1
בקשת הצעת מחיר נשלחה
2
הצעת מחיר התקבלה
3
ההזמנה בוצעה
4
תשלום
5
נשלח
6
נמסר
צפה בפרטי בקשת הצעת המחיר