Analog Devices

AD974ARSZ - 16-Bit 200 kSPS 4-Channel ADC | Analog Devices

部品番号: AD974ARSZ ✓ 生産中
5 V single supply Vdss 28-pin SSOP Package
MOQ: 1 |

AD974ARSZ 概要

The Analog Devices AD974ARSZ is a four-channel, 16-bit, 200 kSPS data acquisition system with a serial interface in a 28-pin SSOP package. It operates from a single 5 V supply and integrates a four-channel input multiplexer, a successive-approximation switched-capacitor ADC, a 2.5 V internal reference, and a power-down mode. The converter accepts 0 V to 4 V, 0 V to 5 V, or ±10 V analog input ranges.

An ADC is an analog-to-digital converter, a semiconductor that samples continuous analog voltage and converts it into a numerical value. The AD974 belongs to the data converter hierarchy, combining an analog input multiplexer and sampling ADC into a dedicated data acquisition system. This integration reduces the number of separate analog-routing and conversion components required in instrumentation, industrial control, and signal-measurement equipment.

The AD974ARSZ provides 16-bit resolution at up to 200 kSPS per conversion channel while operating from one 5 V supply. Its internal 2.5 V reference supports repeatable conversion measurements without requiring a separate reference circuit. A four-channel multiplexer allows one ADC to sample multiple analog sources sequentially. The serial interface reduces the number of signal connections required between the converter and a digital controller.

Internally, the AD974 uses a successive-approximation, switched-capacitor conversion architecture. This architecture compares the sampled input against controlled internal references through successive conversion steps, producing a 16-bit digital result. The switched-capacitor network establishes the input-to-hold behavior of the sampling stage, while the internal reference and control logic coordinate conversion timing and data transfer. A power-down function can reduce activity when measurements are not required.

Typical uses include multichannel process monitoring, industrial sensor acquisition, laboratory measurement systems, and factory automation equipment. The four-channel multiplexer is especially useful when several slowly changing sensor outputs must be measured through one converter. For waveforms requiring faster continuous sampling, the 200 kSPS rate should be evaluated against the required bandwidth, acquisition duration, and system response time.

The primary design consideration is signal conditioning. Input amplitude must remain within the selected 0 V to 4 V, 0 V to 5 V, or ±10 V range, and the source impedance and settling behavior must suit the switched-capacitor input network. Use the manufacturer pin-description table and recommended application schematic to assign analog inputs, reference connections, supply decoupling, and serial-interface signals before PCB routing.

This page combines the manufacturer's converter architecture, package information, input-range details, drop-in family options, and application-oriented design guidance. It helps engineers evaluate the AD974ARSZ as a complete four-channel acquisition front end rather than as an isolated sampling ADC.

ドロップイン代替品: AD974ARSZ — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。

このシリーズのバリエーション

同一シリーズでドロップイン互換のモデル: AD974ARSZ (同一形状・フットプリント) — 相違点: Package, Supply Voltage, Input Multiplexer, Internal Reference Voltage, Power-Down Mode.

Analog Devices
Package: 28-pin SOIC, 7.50 mm width
Supply Voltage: Single +5 V
Internal Reference Voltage: +2.5 V
比較対象 AD974ARSZ →
Analog Devices
Package: 28-SSOP
Supply Voltage: +5 V
Input Multiplexer: 4-channel single-ended input multiplexer
比較対象 AD974ARSZ →
Analog Devices
Supply Voltage: 5 V
Power-Down Mode: Yes
比較対象 AD974ARSZ →
Analog Devices
Package: 28-pin SOIC, 0.295 inch / 7.50 mm width
Supply Voltage: +5 V
Input Multiplexer: Integrated 4-channel analog multiplexer
比較対象 AD974ARSZ →

AD974ARZ

✅ ドロップイン ⚠️ 仕様未検証
Analog Devices
📦 28-pin SSOP
Successive-approximation switched-capacitor ADC · 16 bit · 200 kSPS · 4 channels · 4 single-ended analog inputs · 0 V to 4 V · 0 V to 5 V · -10 V to +10 V

価格はお問い合わせください

データシートを見る →

AD974ARU

✅ ドロップイン ⚠️ 仕様未検証
📦 28-pin SSOP
Same AD974 4-channel, 16-bit, 200 kSPS architecture and 28-pin SSOP footprint; ordering-code suffix differs, with core conversion parameters matching within 0%.

📋 参考代替品(カタログ未掲載)

AD974BRS

✅ ドロップイン
Analog Devices
📦 28-pin SSOP
4 channels · 16 bits · 200 kSPS · 4-channel single-ended input multiplexer · 0 V to +4 V, 0 V to +5 V, or ±10 V · +5 V · +2.5 V · Internal or external 2.5 V reference

価格はお問い合わせください

データシートを見る →

AD974BRZ

✅ ドロップイン ⚠️ 仕様未検証
Analog Devices
📦 28-pin SSOP
Successive-approximation switched-capacitor ADC · 16 bit · 200 kSPS · 4 single-ended channels · Integrated 4-channel analog multiplexer · +5 V · +2.5 V · 0 V to +4 V

価格はお問い合わせください

データシートを見る →

AD974BSZ

✅ ドロップイン ⚠️ 仕様未検証
📦 28-pin SSOP
Same AD974 4-channel, 16-bit, 200 kSPS family and 28-pin SSOP footprint; revision and ordering-code suffix differ while core conversion parameters remain within 10%.

📋 参考代替品(カタログ未掲載)

AD974ARSZ 最大定格&電気的特性

Converter Type Successive-approximation switched-capacitor ADC
Architecture 4-channel data acquisition system with serial interface
分解能 16 bit
Maximum Sampling Rate 200 kSPS
Number of Analog Input Channels 4 channels
Input Multiplexer 4-channel input multiplexer
電源電圧 5 V single supply
Internal Reference Voltage 2.5 V
Supported Analog Input Ranges 0 V to 4 V, 0 V to 5 V, or ±10 V
Digital Interface Serial interface
Power-Down Function Yes
パッケージ 28-pin SSOP
実装タイプ Surface mount
Product Series AD974
Manufacturer Analog Devices

AD974ARSZ 28-pin ssop ピン配置ガイド

AD974ARSZ (28-pin ssop パッケージ) のピン配置。 このアナログコンポーネントは、入力、出力、および電源ピンを備えています。オフセットナル、補償、イネーブルピンの設定については、メーカーのデータシートを参照してください。信号調整やアンプ回路に最適です。

AD974ARSZ の 28-pin ssop パッケージピン配置図

詳細なピン配置データはありません: AD974ARSZ.

詳細は データシート をご参照ください。

主な用途

AD974ARSZ の用途: 6 件s: Industrial Sensor Acquisition, Process Control Instrumentation, Laboratory Data Acquisition, Factory Automation Monitoring, Embedded Measurement Controller, Environmental Monitoring System.

🏭

Industrial Sensor Acquisition

The AD974ARSZ fits multichannel industrial sensor acquisition when the controller must monitor several analog channels through a compact converter. Its integrated four-channel input multiplexer reduces the number of external routing and conversion components, while 16-bit resolution provides 65,536 code levels for precision-oriented measurements. Use the 200 kSPS conversion capability for sampled process signals, not simultaneous high-rate sampling of every channel. The single 5 V supply simplifies system power planning, and the internal 2.5 V reference supports repeatable acquisition without a separate reference device. Signal-conditioning front ends must keep each source within the selected 0 V to 4 V, 0 V to 5 V, or ±10 V range. Account for the switched-capacitor input network's acquisition and settling requirements, especially for resistive sensors and long cable runs.

🏭

Process Control Instrumentation

The AD974ARSZ is appropriate for process-control instrumentation that repeatedly samples pressure, temperature, level, or current signals and transfers measurements to a controller. The four-channel multiplexer allows several scaled sensor outputs to share one 16-bit converter, which can simplify board area and reduce conversion-channel count. Its 200 kSPS maximum rate gives the controller adequate throughput for many monitoring loops while supporting sequential sampling of slower signals. The internal 2.5 V reference and single 5 V operation make the converter suitable for compact analog measurement modules. Configure the input range to match each signal family, protect inputs against transients, and ensure the source impedance permits full settling during each conversion. The serial interface also helps limit digital routing on space-constrained controller boards.

🔧

Laboratory Data Acquisition

The AD974ARSZ can serve as the conversion element in a laboratory data-acquisition front end that combines several slow or medium-speed analog sources with a digital host. Its four-channel multiplexer supports sequential acquisition, and its 16-bit resolution is appropriate for measurements requiring more precision than an 8-bit or 12-bit converter. The 200 kSPS rate provides useful flexibility for waveforms that do not require simultaneous high-speed acquisition. A single 5 V analog supply and the integrated 2.5 V reference reduce support-component requirements. For bench instruments, use calibrated input conditioning and verify settling with the selected sensor impedance. The serial interface can connect to a microcontroller, DSP, or FPGA, provided the host handles the converter's timing and data format exactly as specified in the manufacturer datasheet.

🏭

Factory Automation Monitoring

The AD974ARSZ supports factory automation monitoring where a controller gathers analog measurements from multiple actuators, transducers, or test nodes. Its integrated four-channel multiplexer consolidates related inputs while the 200 kSPS conversion rate supports sequential acquisition across a distributed measurement network. The 16-bit converter resolution can improve observability when small process variations must be distinguished, although the overall accuracy still depends on the reference, analog front end, and calibration. Use the internal 2.5 V reference only within its specified measurement architecture, and follow the manufacturer layout for bypassing and routing. Because industrial signals can contain transients, include appropriate input protection without adding excessive source impedance. The power-down mode can reduce consumption during idle intervals, while the serial interface keeps the connection to an embedded controller compact.

🧩

Embedded Measurement Controller

The AD974ARSZ fits an embedded measurement controller that combines analog sensing with digital computation in a compact assembly. Four multiplexed inputs reduce the number of converter packages, and the serial interface provides a practical connection to a microcontroller or FPGA without requiring a wide parallel data bus. With 16-bit resolution and a maximum 200 kSPS rate, the device can handle measurement channels that require more precision than basic sensor interfaces while remaining suitable for sequential sampling. The single 5 V supply is convenient for embedded power rails, and the integrated 2.5 V reference reduces the number of precision reference components. The host controller should implement conversion timing, channel selection, and data interpretation according to the manufacturer timing diagrams. External filtering and protection should be designed around the selected input range and expected source impedance.

🌐

Environmental Monitoring System

The AD974ARSZ can be used in environmental monitoring systems that acquire signals from multiple sensor types, such as temperature, humidity, light, or flow transducers. The four-channel multiplexer allows a single sampling ADC to service several related measurements, while the 16-bit resolution is useful when sensor outputs represent relatively small changes. Environmental signals are commonly slow, so the 200 kSPS capability provides ample conversion margin for sequential sampling. The internal 2.5 V reference and 5 V supply architecture simplify remote or compact instrumentation, although long cable and sensor connections may require filtering or isolation. Ensure every sensor signal remains within the selected input range and settles before conversion. Power-down can be used during long idle periods, and the serial interface can communicate efficiently with a low-power monitoring controller.

おすすめ製品の概要

What is the AD974ARSZ?
The AD974ARSZ is a four-channel, 16-bit, 200 kSPS data acquisition system from Analog Devices. According to the Analog Devices AD974 datasheet, it combines a four-channel input multiplexer, a high-speed successive-approximation switched-capacitor ADC, a 2.5 V internal reference, and a serial interface in one 28-pin SSOP package.
What is the resolution and sampling rate of AD974ARSZ?
The AD974ARSZ converts each selected analog input with 16-bit resolution at an aggregate conversion rate up to 200 kSPS. According to the Analog Devices AD974 datasheet, the four inputs are selected through an integrated multiplexer, so the converter is intended for multichannel acquisition rather than simultaneous 200 kSPS sampling of all four channels.
What supply voltage does AD974ARSZ require?
The AD974ARSZ operates from a single 5 V supply. The Analog Devices AD974 datasheet identifies the internal reference as 2.5 V and includes a power-down mode for reducing device activity when acquisition is not active. Place supply-decoupling capacitors close to the device pins using the manufacturer reference layout.
What analog input ranges are supported by AD974ARSZ?
The AD974ARSZ supports 0 V to 4 V, 0 V to 5 V, and ±10 V analog input ranges. According to the Analog Devices AD974 datasheet, the selected range must be supported by the associated signal-conditioning circuitry. Confirm the pin configuration and range settings in the manufacturer pin-description table before connecting external sources.
Where can I download the AD974ARSZ datasheet PDF?
The official AD974ARSZ datasheet PDF is available from the Analog Devices technical-documentation page for the AD974 family. Use the manufacturer document for the exact electrical characteristics, pin configuration, timing information, and application schematic because the AD974ARSZ ordering code identifies a specific package and temperature-grade option.
Where can I find the AD974ARSZ pinout?
The AD974ARSZ pinout is found in the pin-configuration and pin-description tables of the official Analog Devices AD974 datasheet. The 28-pin SSOP package is identified by the distributor product listing, while the manufacturer document should be used to assign every analog input, supply, reference, control, and serial-interface connection before layout is released.
What can replace the AD974ARSZ?
The AD974ARZ is a same-family AD974 option for direct evaluation on the 28-pin SSOP footprint, while the AD974ARU, AD974BRS, AD974BRZ, and AD974BSZ provide related family configurations that must be checked against temperature grade, pinout, and operating conditions. No verified cross-brand drop-in replacement was identified, so a redesign should not be treated as pin-compatible without engineering review.
Is AD974ARSZ the same as AD974BRS?
The AD974ARSZ and AD974BRS belong to the same AD974 converter family, but they should not be assumed functionally identical without comparing their ordering-code specifications. The manufacturer lists the family in 28-pin DIP, SOIC, and SSOP formats. Check temperature grade, package suffix, pin configuration, and acquisition requirements before substituting one ordering code for the other.
When should I choose AD974ARSZ instead of AD974ARZ?
Choose the AD974ARSZ when the required temperature grade, qualification, and ordering code specifically call for the SZ variant. The AD974ARZ is a same-family alternative for evaluation on the same 28-pin SSOP footprint. A direct replacement should be approved only after the manufacturer ordering information confirms matching electrical, temperature, package, and pin requirements.
Is AD974ARSZ suitable for multichannel industrial measurement?
The AD974ARSZ is suitable for multichannel industrial measurement when each source can be sampled sequentially and the required throughput fits the 200 kSPS converter rate. Its four-channel multiplexer reduces external analog-routing complexity, while the 16-bit resolution supports precision-oriented acquisition. Use the manufacturer timing data to allocate conversion and settling intervals for slower sensor outputs.
How should I design the input network for AD974ARSZ?
Design the input network so every selected source stays within the configured 0 V to 4 V, 0 V to 5 V, or ±10 V range and settles correctly during acquisition. The Analog Devices AD974 datasheet identifies a switched-capacitor ADC architecture, making source impedance and settling time important. Use the recommended application circuit and external protection appropriate to the measured signals.
Does AD974ARSZ need an external reference voltage?
The AD974ARSZ includes a 2.5 V internal reference according to the Analog Devices AD974 datasheet. This integration allows the converter, multiplexer, and reference circuitry to operate from one 5 V supply. Follow the manufacturer pin and decoupling guidance, especially if a design also requires an external reference or precision measurement calibration.
What is the price of AD974ARSZ?
Current AD974ARSZ pricing and quantity availability should be confirmed through the Request a Quote form on this page. The form allows buyers to specify the required quantity and packaging so the commercial team can return a current quotation. This avoids presenting a stale unit price or an unqualified single-quantity figure.
Where can I buy AD974ARSZ online?
Use the Request a Quote form on this page to request AD974ARSZ pricing, current availability, and lead time. Specify the required quantity, shipment destination, and reel or other delivery format. The AD974ARSZ is identified as a 28-pin SSOP data acquisition ADC, so the quotation should also confirm the exact ordering code and packaging.
What is the lead time and stock status for AD974ARSZ?
Current stock and lead time for AD974ARSZ should be requested through the Request a Quote form on this page. Include the required order quantity and target delivery date so the commercial team can confirm the current allocation rather than relying on a generic stock estimate. Packaging format can also affect scheduling for this 28-pin SSOP device.
What are the key specifications of AD974ARSZ engineers should know?
The key AD974ARSZ specifications are 16-bit resolution, up to 200 kSPS sampling, four multiplexed input channels, a single 5 V supply, a 2.5 V internal reference, serial data output, power-down capability, and a 28-pin SSOP package. These characteristics come from the official Analog Devices AD974 product page and datasheet.
What is the best cross-brand equivalent for AD974ARSZ?
No verified cross-brand equivalent was established for the AD974ARSZ in the manufacturer product information or component cross-reference results. A substitute should not be called a drop-in replacement unless it uses the same 28-pin SSOP footprint, preserves the four-channel input architecture, supports 16-bit conversion, and matches the required sampling, reference, input-range, and timing specifications.

エンジニアリング参考データ: AD974ARSZ — 比較、設計ガイダンス、コンプライアンス情報。

選定ガイド

Choose the AD974ARSZ when the design requires a compact four-channel, 16-bit data acquisition converter with a 200 kSPS maximum rate, a single 5 V supply, and a serial interface. It is particularly suitable when several medium-speed or slow analog sources can be sampled sequentially. The AD974ARZ and AD974ARU are same-family SSOP alternatives that should be selected only after confirming the required temperature grade and ordering information. Consider the AD974BRS, AD974BRZ, and AD974BSZ when their specific suffix and revision requirements fit the production BOM, again validating pin compatibility and operating limits. No cross-brand drop-in substitute is established, so changing manufacturers may require a footprint, interface, acquisition-timing, and signal-conditioning review. For all options, evaluate source settling, reference accuracy, input-range implementation, serial timing, and thermal conditions rather than relying on resolution alone.

代替品との比較

パラメータ この製品 AD974ARZ AD974ARU AD974BRS AD974BRZ AD974BSZ
Package 28-pin SSOP 28-pin SSOP - same 28-pin SSOP - same 28-pin SSOP - same 28-pin SSOP - same 28-pin SSOP - same
Brand Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices
Resolution 16 bit 16 bit 16 bit 16 bit 16 bit 16 bit
Maximum Sampling Rate 200 kSPS 200 kSPS 200 kSPS 200 kSPS 200 kSPS 200 kSPS
Analog Input Channels 4 channels 4 channels 4 channels 4 channels 4 channels 4 channels
Supply Voltage 5 V single supply 5 V single supply 5 V single supply 5 V single supply 5 V single supply 5 V single supply
Internal Reference 2.5 V 2.5 V 2.5 V 2.5 V 2.5 V 2.5 V
Input Ranges 0 V to 4 V, 0 V to 5 V, or ±10 V 0 V to 4 V, 0 V to 5 V, or ±10 V 0 V to 4 V, 0 V to 5 V, or ±10 V 0 V to 4 V, 0 V to 5 V, or ±10 V 0 V to 4 V, 0 V to 5 V, or ±10 V 0 V to 4 V, 0 V to 5 V, or ±10 V
Digital Interface Serial Serial Serial Serial Serial Serial
Power-Down Function Yes Yes Yes Yes Yes Yes

主な差別化要因

  • Complete four-channel acquisition front end (vs AD974ARZ)
  • Single 5 V supply with integrated reference (vs AD974BRS)
  • Multiplexed 16-bit conversion at 200 kSPS (vs AD974BRZ)

設計ノート

Do not treat the four input channels as simultaneously sampled at 200 kSPS. The AD974 uses an input multiplexer, so the converter samples selected channels sequentially. Allocate acquisition, conversion, and output-transfer intervals in the host controller, and verify that every sensor signal has settled before its conversion. This prevents aliasing-like timing errors and inaccurate readings from slow or high-impedance sources.

Place the 5 V supply bypass capacitor and any additional recommended decoupling components directly beside the associated AD974ARSZ pins. Keep analog input routing away from the serial clock and data paths to reduce coupling into the switched-capacitor sampling network. Use a continuous ground reference under the device where the package and board construction permit, and terminate unused inputs according to the manufacturer pin-description table.

The 16-bit switched-capacitor ADC requires adequate acquisition settling, so source impedance and filter capacitance must be calculated together rather than selected independently. Long sensor cables can add capacitance and noise. Use protected, low-source-impedance front ends, keep return paths short, and validate acquisition timing at the operating conversion rate before committing the analog layout.

コンプライアンス情報

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
鉛フリー
Unknown
ハロゲンフリー
Unknown
紛争鉱物
Unknown

The manufacturer product page and datasheet identify the converter and its package, but no explicit environmental or material-compliance declarations were stated for this ordering code.

データ検証日: 2026-11-10 — データはXAIPARTの部品エンジニアリングチームによって検証・管理されています

関連検索

AD974ARSZ datasheet AD974ARSZ datasheet pdf AD974ARSZ pinout AD974ARSZ specifications AD974ARSZ 28-SSOP AD974ARSZ equivalent AD974ARSZ replacement AD974ARSZ cross reference AD974ARSZ vs AD974BRS AD974ARSZ application circuit AD974ARSZ price AD974ARSZ stock Analog Devices AD974ARSZ

関連部品&用語

Analog Devices AD974ARSZ AD974ARZ AD974ARU AD974BRS AD974BRZ AD974BSZ AD974 ADC analog-to-digital converter data acquisition system successive-approximation ADC switched-capacitor ADC 4-channel input multiplexer serial interface 16-bit resolution 200 kSPS sampling rate 2.5 V internal reference single 5 V supply power-down mode 28-pin SSOP surface-mount package industrial sensor acquisition process control instrumentation
クイック見積RFQ
詳細をすべてご記入ください — 営業チームが24時間以内にご返信いたします
部品番号 メーカー パッケージ QTY 目標価格 小計
✓
見積を送信しました!

24時間以内にメールでご返信いたします

1
RFQ送信済み
2
見積受領
3
注文済み
4
お支払い
5
発送済み
6
配達済み
RFQの詳細を表示