AD974ARSZ - 16-Bit 200 kSPS 4-Channel ADC | Analog Devices
MPN: AD974ARSZ ✓ AktifAD974ARSZ Ringkasan
An ADC is an analog-to-digital converter, a semiconductor that samples continuous analog voltage and converts it into a numerical value. The AD974 belongs to the data converter hierarchy, combining an analog input multiplexer and sampling ADC into a dedicated data acquisition system. This integration reduces the number of separate analog-routing and conversion components required in instrumentation, industrial control, and signal-measurement equipment.
The AD974ARSZ provides 16-bit resolution at up to 200 kSPS per conversion channel while operating from one 5 V supply. Its internal 2.5 V reference supports repeatable conversion measurements without requiring a separate reference circuit. A four-channel multiplexer allows one ADC to sample multiple analog sources sequentially. The serial interface reduces the number of signal connections required between the converter and a digital controller.
Internally, the AD974 uses a successive-approximation, switched-capacitor conversion architecture. This architecture compares the sampled input against controlled internal references through successive conversion steps, producing a 16-bit digital result. The switched-capacitor network establishes the input-to-hold behavior of the sampling stage, while the internal reference and control logic coordinate conversion timing and data transfer. A power-down function can reduce activity when measurements are not required.
Typical uses include multichannel process monitoring, industrial sensor acquisition, laboratory measurement systems, and factory automation equipment. The four-channel multiplexer is especially useful when several slowly changing sensor outputs must be measured through one converter. For waveforms requiring faster continuous sampling, the 200 kSPS rate should be evaluated against the required bandwidth, acquisition duration, and system response time.
The primary design consideration is signal conditioning. Input amplitude must remain within the selected 0 V to 4 V, 0 V to 5 V, or ±10 V range, and the source impedance and settling behavior must suit the switched-capacitor input network. Use the manufacturer pin-description table and recommended application schematic to assign analog inputs, reference connections, supply decoupling, and serial-interface signals before PCB routing.
This page combines the manufacturer's converter architecture, package information, input-range details, drop-in family options, and application-oriented design guidance. It helps engineers evaluate the AD974ARSZ as a complete four-channel acquisition front end rather than as an isolated sampling ADC.
Pilihan pengganti yang segera untuk AD974ARSZ — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.
Varietas dalam siri ini
Model serupa yang kompatibel dengan pengganti yang segera AD974ARSZ (sama faktor bentuk dan kaki) — berbeza dalam Package, Supply Voltage, Input Multiplexer, Internal Reference Voltage, Power-Down Mode.
AD974ARZ
✅ Masuk Drop-In ⚠️ Spesifikasi Tidak DisahkanHubungi untuk harga
Lihat Datasheet →AD974ARU
✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif rujukan (tidak dalam katalog)
AD974BRS
✅ Masuk Drop-InHubungi untuk harga
Lihat Datasheet →AD974BRZ
✅ Masuk Drop-In ⚠️ Spesifikasi Tidak DisahkanHubungi untuk harga
Lihat Datasheet →AD974BSZ
✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif rujukan (tidak dalam katalog)
AD974ARSZ Penilaian maksimum & Ciri-ciri Elektrik
| Converter Type | Successive-approximation switched-capacitor ADC |
| Architecture | 4-channel data acquisition system with serial interface |
| Pemecahkatan | 16 bit |
| Maximum Sampling Rate | 200 kSPS |
| Number of Analog Input Channels | 4 channels |
| Input Multiplexer | 4-channel input multiplexer |
| Tegangan Pemberi Arus | 5 V single supply |
| Internal Reference Voltage | 2.5 V |
| Supported Analog Input Ranges | 0 V to 4 V, 0 V to 5 V, or ±10 V |
| Digital Interface | Serial interface |
| Power-Down Function | Yes |
| Kemasan | 28-pin SSOP |
| Jenis Pemasangan | Surface mount |
| Product Series | AD974 |
| Manufacturer | Analog Devices |
Panduan Konfigurasi Pin AD974ARSZ 28-pin ssop
Konfigurasi pin untuk AD974ARSZ (28-pin ssop pakai). Komponen analog ini mempunyai pin masukan, keluaran, dan kuasa. Rujuk dokumen pengeluar untuk konfigurasi pengecualian, pemulihan, dan pin aktifkan. Ideal untuk pengawasan isyarat dan litar pengukur.
Tiada data garisan pin yang diperoleh untuk AD974ARSZ.
Rujuk kepada lembaran data untuk konfigurasi pin penuh.
Aplikasi Biasa
AD974ARSZ patut untuk 6 aplikasis: Industrial Sensor Acquisition, Process Control Instrumentation, Laboratory Data Acquisition, Factory Automation Monitoring, Embedded Measurement Controller, Environmental Monitoring System.
Industrial Sensor Acquisition
The AD974ARSZ fits multichannel industrial sensor acquisition when the controller must monitor several analog channels through a compact converter. Its integrated four-channel input multiplexer reduces the number of external routing and conversion components, while 16-bit resolution provides 65,536 code levels for precision-oriented measurements. Use the 200 kSPS conversion capability for sampled process signals, not simultaneous high-rate sampling of every channel. The single 5 V supply simplifies system power planning, and the internal 2.5 V reference supports repeatable acquisition without a separate reference device. Signal-conditioning front ends must keep each source within the selected 0 V to 4 V, 0 V to 5 V, or ±10 V range. Account for the switched-capacitor input network's acquisition and settling requirements, especially for resistive sensors and long cable runs.
Disebarkan
Process Control Instrumentation
The AD974ARSZ is appropriate for process-control instrumentation that repeatedly samples pressure, temperature, level, or current signals and transfers measurements to a controller. The four-channel multiplexer allows several scaled sensor outputs to share one 16-bit converter, which can simplify board area and reduce conversion-channel count. Its 200 kSPS maximum rate gives the controller adequate throughput for many monitoring loops while supporting sequential sampling of slower signals. The internal 2.5 V reference and single 5 V operation make the converter suitable for compact analog measurement modules. Configure the input range to match each signal family, protect inputs against transients, and ensure the source impedance permits full settling during each conversion. The serial interface also helps limit digital routing on space-constrained controller boards.
Disebarkan
Laboratory Data Acquisition
The AD974ARSZ can serve as the conversion element in a laboratory data-acquisition front end that combines several slow or medium-speed analog sources with a digital host. Its four-channel multiplexer supports sequential acquisition, and its 16-bit resolution is appropriate for measurements requiring more precision than an 8-bit or 12-bit converter. The 200 kSPS rate provides useful flexibility for waveforms that do not require simultaneous high-speed acquisition. A single 5 V analog supply and the integrated 2.5 V reference reduce support-component requirements. For bench instruments, use calibrated input conditioning and verify settling with the selected sensor impedance. The serial interface can connect to a microcontroller, DSP, or FPGA, provided the host handles the converter's timing and data format exactly as specified in the manufacturer datasheet.
Disebarkan
Factory Automation Monitoring
The AD974ARSZ supports factory automation monitoring where a controller gathers analog measurements from multiple actuators, transducers, or test nodes. Its integrated four-channel multiplexer consolidates related inputs while the 200 kSPS conversion rate supports sequential acquisition across a distributed measurement network. The 16-bit converter resolution can improve observability when small process variations must be distinguished, although the overall accuracy still depends on the reference, analog front end, and calibration. Use the internal 2.5 V reference only within its specified measurement architecture, and follow the manufacturer layout for bypassing and routing. Because industrial signals can contain transients, include appropriate input protection without adding excessive source impedance. The power-down mode can reduce consumption during idle intervals, while the serial interface keeps the connection to an embedded controller compact.
Disebarkan
Embedded Measurement Controller
The AD974ARSZ fits an embedded measurement controller that combines analog sensing with digital computation in a compact assembly. Four multiplexed inputs reduce the number of converter packages, and the serial interface provides a practical connection to a microcontroller or FPGA without requiring a wide parallel data bus. With 16-bit resolution and a maximum 200 kSPS rate, the device can handle measurement channels that require more precision than basic sensor interfaces while remaining suitable for sequential sampling. The single 5 V supply is convenient for embedded power rails, and the integrated 2.5 V reference reduces the number of precision reference components. The host controller should implement conversion timing, channel selection, and data interpretation according to the manufacturer timing diagrams. External filtering and protection should be designed around the selected input range and expected source impedance.
Disebarkan
Environmental Monitoring System
The AD974ARSZ can be used in environmental monitoring systems that acquire signals from multiple sensor types, such as temperature, humidity, light, or flow transducers. The four-channel multiplexer allows a single sampling ADC to service several related measurements, while the 16-bit resolution is useful when sensor outputs represent relatively small changes. Environmental signals are commonly slow, so the 200 kSPS capability provides ample conversion margin for sequential sampling. The internal 2.5 V reference and 5 V supply architecture simplify remote or compact instrumentation, although long cable and sensor connections may require filtering or isolation. Ensure every sensor signal remains within the selected input range and settles before conversion. Power-down can be used during long idle periods, and the serial interface can communicate efficiently with a low-power monitoring controller.
Disebarkan
Ringkasan Produk Disebarkan
Data referensi kejuruteraan untuk AD974ARSZ — perbandingan, panduan rancangan, dan maklumat kesediaan
Panduan Pilihan
Perbandingan dengan Gantian
| Parametr | Produk Ini | AD974ARZ | AD974ARU | AD974BRS | AD974BRZ | AD974BSZ |
|---|---|---|---|---|---|---|
| Package | 28-pin SSOP | 28-pin SSOP - same | 28-pin SSOP - same | 28-pin SSOP - same | 28-pin SSOP - same | 28-pin SSOP - same |
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Resolution | 16 bit | 16 bit | 16 bit | 16 bit | 16 bit | 16 bit |
| Maximum Sampling Rate | 200 kSPS | 200 kSPS | 200 kSPS | 200 kSPS | 200 kSPS | 200 kSPS |
| Analog Input Channels | 4 channels | 4 channels | 4 channels | 4 channels | 4 channels | 4 channels |
| Supply Voltage | 5 V single supply | 5 V single supply | 5 V single supply | 5 V single supply | 5 V single supply | 5 V single supply |
| Internal Reference | 2.5 V | 2.5 V | 2.5 V | 2.5 V | 2.5 V | 2.5 V |
| Input Ranges | 0 V to 4 V, 0 V to 5 V, or ±10 V | 0 V to 4 V, 0 V to 5 V, or ±10 V | 0 V to 4 V, 0 V to 5 V, or ±10 V | 0 V to 4 V, 0 V to 5 V, or ±10 V | 0 V to 4 V, 0 V to 5 V, or ±10 V | 0 V to 4 V, 0 V to 5 V, or ±10 V |
| Digital Interface | Serial | Serial | Serial | Serial | Serial | Serial |
| Power-Down Function | Yes | Yes | Yes | Yes | Yes | Yes |
Penyeberangsung Jelas
- Complete four-channel acquisition front end (vsAD974ARZ)
- Single 5 V supply with integrated reference (vsAD974BRS)
- Multiplexed 16-bit conversion at 200 kSPS (vsAD974BRZ)
Catatan Desain
Do not treat the four input channels as simultaneously sampled at 200 kSPS. The AD974 uses an input multiplexer, so the converter samples selected channels sequentially. Allocate acquisition, conversion, and output-transfer intervals in the host controller, and verify that every sensor signal has settled before its conversion. This prevents aliasing-like timing errors and inaccurate readings from slow or high-impedance sources.
Place the 5 V supply bypass capacitor and any additional recommended decoupling components directly beside the associated AD974ARSZ pins. Keep analog input routing away from the serial clock and data paths to reduce coupling into the switched-capacitor sampling network. Use a continuous ground reference under the device where the package and board construction permit, and terminate unused inputs according to the manufacturer pin-description table.
The 16-bit switched-capacitor ADC requires adequate acquisition settling, so source impedance and filter capacitance must be calculated together rather than selected independently. Long sensor cables can add capacitance and noise. Use protected, low-source-impedance front ends, keep return paths short, and validate acquisition timing at the operating conversion rate before committing the analog layout.
Maklumat Kesediaan
The manufacturer product page and datasheet identify the converter and its package, but no explicit environmental or material-compliance declarations were stated for this ordering code.