Analog Devices

AD976ABNZ - 16-Bit 200 kSPS ADC | Analog Devices

部品番号: AD976ABNZ ✗ 生産終了
5 V Vdss 28-pin plastic DIP Package Yes Speed
MOQ: 1 |

AD976ABNZ 概要

The Analog Devices AD976ABNZ is a 16-bit, single-input successive-approximation analog-to-digital converter with a 200 kSPS throughput rate, operating from a single 5 V supply and packaged in a 28-pin plastic DIP. It combines an ADC core, internal reference, sample-and-hold circuitry, and on-chip clock into a complete parallel-output data-conversion solution.

An ADC is an interface IC that converts a continuously varying analog voltage into a digital code suitable for processing by a microprocessor, DSP, FPGA, or control system. The AD976 belongs to the data-converter hierarchy: ADC → SAR ADC → data-converter IC → interface semiconductor. A successive-approximation converter uses an internal DAC and comparator to determine each output bit, making it practical for medium-speed instrumentation and control applications.

The principal characteristics of the AD976A include 16-bit resolution, 200 kSPS throughput, parallel digital output, and single 5 V operation. The AD976 version of the family operates at 100 kSPS, while the AD976A doubles the throughput to 200 kSPS. The AD976/AD976A architecture also supports selectable internal or external reference arrangements and includes factory calibration for offset, gain, SNR, and THD performance.

Because this is a bipolar converter, input signal range and reference voltage determine the available full-scale span. The parallel interface exposes the conversion result directly on dedicated data pins, avoiding serial-interface overhead at higher sample rates. An on-chip clock reduces the number of external timing components, while the integrated reference supports standalone operation when the required accuracy and range suit the application.

Typical uses include industrial process measurement, instrumentation, waveform analysis, laboratory data acquisition, medical monitoring, and embedded control systems. The 200 kSPS rate is suitable for capturing slowly varying or moderate-bandwidth analog signals rather than high-frequency communications waveforms. Its 28-pin through-hole package also favors legacy industrial and laboratory equipment where DIP sockets and through-hole assembly remain practical.

Designers should use the manufacturer pin-description and connection tables when assigning the parallel data, clock, reference, analog-input, and supply pins. Input-source impedance, acquisition time, reference stability, digital-bus timing, and analog grounding can affect conversion accuracy. Because a SAR ADC requires sufficient acquisition time, the sampling network must settle to the required accuracy before each conversion begins.

This product page combines the family specifications, verified distributor identification, package details, replacement analysis, and practical design guidance to provide a concise engineering reference for the AD976ABNZ. The 28-pin DIP construction and parallel 16-bit interface remain its defining features when evaluating legacy data-acquisition upgrades.

ドロップイン代替品: AD976ABNZ — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。

このシリーズのバリエーション

同一シリーズでドロップイン互換のモデル: AD976ABNZ (同一形状・フットプリント) — 相違点: Architecture, Package, Sampling Rate.

Analog Devices
Architecture: SAR (Successive Approximation)
Package: 28-pin PDIP (N-28)
Sampling Rate: 100 kSPS
比較対象 AD976ABNZ →

AD976ANZ

✅ ドロップイン
Analog Devices
📦 28-pin plastic DIP
16 bit · 100 kSPS · SAR (Successive Approximation) · 1 single-ended · Parallel · 4.75 V to 5.25 V · 4.75 V to 5.25 V · Single-ended

価格はお問い合わせください

データシートを見る →

AD976ABNZ 最大定格&電気的特性

分解能 16 bit
サンプリングレート 200 kSPS
Input Count 1 analog input
Architecture Successive-approximation ADC
電源電圧 5 V
Data Interface Parallel
パッケージ 28-pin plastic DIP
Package Width 0.600 in (15.24 mm)
動作温度 -40 °C to +85 °C
On-Chip Reference Internal or external reference selection
On-Chip Clock Yes
Factory Calibration Offset, gain, SNR, and THD
Maximum Power Dissipation 100 mW
Analog Input Type Single-ended or differential input

AD976ABNZ 0.600 in (15.24 mm) ピン配置ガイド

AD976ABNZ (0.600 in (15.24 mm) パッケージ) のピン配置。 このアナログコンポーネントは、入力、出力、および電源ピンを備えています。オフセットナル、補償、イネーブルピンの設定については、メーカーのデータシートを参照してください。信号調整やアンプ回路に最適です。

AD976ABNZ の 0.600 in (15.24 mm) パッケージピン配置図

詳細なピン配置データはありません: AD976ABNZ.

詳細は データシート をご参照ください。

主な用途

AD976ABNZ の用途: 6 件s: Industrial Process Measurement, Laboratory Data Acquisition, Medical Monitoring Equipment, Waveform Analysis, Embedded Control Systems, Automatic Test Equipment.

🏭

Industrial Process Measurement

The AD976ABNZ fits industrial process-control front ends that need 16-bit conversion at up to 200 kSPS. It can digitize pressure, temperature, level, or flow signals after suitable conditioning, then present the result through its parallel interface to a microprocessor or DSP. The single 5 V supply simplifies system power planning, while the integrated reference and on-chip clock reduce external support components. Accurate measurement still depends on source settling during the acquisition interval, low-noise reference routing, and separation of analog and return currents on the PCB.

🖥️

Laboratory Data Acquisition

For laboratory instruments, the AD976ABNZ provides a practical combination of 16-bit resolution, 200 kSPS throughput, and a parallel data interface. It is appropriate for capturing moderate-bandwidth waveforms, transducer outputs, and diagnostic signals when the acquisition rate does not need to exceed the converter's rated throughput. The on-chip clock and reference support a compact measurement chain, although laboratory designs should evaluate input bandwidth, reference accuracy, and connector noise separately. A shielded analog input and a stable ground-return arrangement improve repeatability.

💊

Medical Monitoring Equipment

AD976ABNZ can serve as the ADC in medical monitoring equipment that acquires moderate-rate sensor waveforms and requires 16-bit digital resolution. Its 200 kSPS maximum rate is suitable for many pressure, flow, bio-potential conditioning, and physiological parameter signals after appropriate isolation and amplification. The -40 °C to +85 °C operating range supports conventional equipment environments. Medical suitability cannot be inferred from the converter alone; the complete system must meet the applicable safety, isolation, leakage, and signal-safety requirements for its intended use.

📈

Waveform Analysis

The AD976ABNZ is useful in waveform-analysis instruments that must capture general-purpose analog signals with 16-bit resolution. Its 200 kSPS sampling capability provides more temporal resolution than the 100 kSPS AD976 configuration and suits vibration, positioning, control-loop, and transient measurements within the converter's bandwidth. The parallel output allows samples to be transferred efficiently to a digital processor. Designers should select an appropriate analog anti-alias filter, verify that the source can settle within the acquisition time, and use a low-jitter clock path when time-domain accuracy is important.

🔧

Embedded Control Systems

AD976ABNZ fits embedded control systems that monitor several slowly varying analog quantities through a multiplexed front end and require a deterministic parallel conversion interface. The 200 kSPS rate supports faster feedback loops than the 100 kSPS family option, while 16-bit resolution preserves fine detail in sensor readings. The 28-pin DIP construction is especially useful for legacy control boards using sockets or through-hole routing. Firmware must account for conversion timing, data settling, and any multiplexing interval, while the analog network must present a valid settled voltage before each conversion.

⚡

Automatic Test Equipment

AD976ABNZ is applicable to automatic test equipment that measures low-level or moderate-level analog outputs from boards and production fixtures. The 16-bit resolution supports accurate characterization, and the 200 kSPS throughput permits rapid sampling during automated test sequences. Its parallel interface can feed a controller or logic device without serial framing overhead. Fixture design remains critical because relay resistance, relay transients, long cable runs, and unstable references can dominate the converter's intrinsic accuracy. Place the input network close to the device and establish a controlled analog ground reference at the fixture.

What are the key specifications of AD976ABNZ that engineers should know?
The AD976ABNZ is a 16-bit, 200 kSPS, single-input SAR ADC in a 28-pin plastic DIP. According to the Analog Devices AD976 product page, it operates from a single 5 V supply and supports parallel digital output. It combines an ADC, reference, sample-and-hold function, and on-chip clock, with factory calibration for SNR and THD performance.
What is the operating voltage of AD976ABNZ?
The AD976ABNZ operates from a single 5 V supply. Analog Devices identifies the AD976 and AD976A as low-power 16-bit converters that each operate from one 5 V supply. The 28-pin DIP part is the 200 kSPS AD976A configuration, while the related AD976 operates at 100 kSPS.
What is the sampling rate of AD976ABNZ?
The AD976ABNZ has a throughput rate of 200 kSPS. Analog Devices specifies 200 kSPS for the AD976A family and 100 kSPS for the original AD976. This distinction is important when the replacement must preserve acquisition time and system timing.
What is the difference between AD976ABNZ and AD976ANZ?
AD976ABNZ is the 200 kSPS AD976A configuration, while AD976ANZ is the 100 kSPS AD976 configuration in the same 28-pin DIP family. The throughput differs by 100 kSPS, or 100% relative to the AD976ANZ rate. AD976ANZ can serve as a same-footprint functional replacement when 100 kSPS is sufficient.
Is AD976ABNZ suitable for industrial measurement and control systems?
Yes, AD976ABNZ is suitable for industrial measurement and control systems that need 16-bit resolution at up to 200 kSPS. Its single 5 V supply, integrated reference, on-chip clock, and parallel output simplify standalone acquisition. The -40 °C to +85 °C operating range supports typical industrial environments when the surrounding system is properly designed.
Where can I find the AD976ABNZ datasheet and pinout?
The official Analog Devices AD976 product page provides the family documentation and ordering information. The AD976ABNZ is identified as a 28-pin plastic DIP version of the 16-bit AD976A converter. Use the manufacturer pin-description table, electrical characteristics, and application diagrams to verify every signal assignment and the recommended reference and bypass connections.
Where can I buy AD976ABNZ and check current availability?
Use the Request a Quote form on this page to ask about AD976ABNZ availability, current lead time, and minimum order quantity. The component is a legacy 28-pin DIP ADC, so current procurement depends on remaining manufacturer or channel inventory. Request a written quotation for the exact AD976ABNZ ordering code rather than substituting a different package or speed grade.
What is the price of AD976ABNZ?
Current pricing for the obsolete AD976ABNZ should be requested through the Request a Quote form on this page. Because legacy converter inventory can change independently of regular catalog pricing, the form should be used to confirm the unit price, quantity breaks, and availability for the exact 28-pin DIP ordering code.
What is the lead time for AD976ABNZ?
The current lead time for AD976ABNZ depends on remaining channel inventory and should be confirmed through the Request a Quote form on this page. Provide the required quantity, tube packaging requirement, and target delivery date. Do not assume that the lead time of an active high-volume ADC applies to this legacy 28-pin DIP part.
Is AD976ABNZ in stock?
Stock for AD976ABNZ is not represented by a fixed quantity on this page. Submit a Request a Quote form stating the required quantity and tube packaging needs to obtain a current allocation and delivery schedule. Confirm the exact AD976ABNZ marking and orderable configuration in the quotation.
What can replace AD976ABNZ?
AD976ANZ is the closest documented same-family alternative because it uses the 28-pin DIP format and parallel interface, but its 100 kSPS throughput is 100 kSPS lower than the AD976ABNZ. It is appropriate only when the acquisition system can operate at half the target sample rate and accepts the associated timing change.
Can AD976ANZ replace AD976ABNZ without changing the PCB?
AD976ANZ can occupy the same 28-pin DIP footprint, but it is not a functionally identical substitute. Its maximum throughput is 100 kSPS versus 200 kSPS for AD976ABNZ. The pin-compatible mechanical fit therefore does not guarantee timing-compatible operation, so validate acquisition time, conversion latency, and downstream clocking before replacement.
What is the best equivalent for AD976ABNZ?
No verified cross-brand drop-in equivalent can be recommended for AD976ABNZ. A published comparison with ADS8504IBDW identifies a 12-bit, 250 kSPS converter, which changes both resolution and package and therefore is not a drop-in replacement. For the closest documented family option, evaluate AD976ANZ against the required 200 kSPS throughput.
When should I choose AD976ABNZ over AD976ANZ?
Choose AD976ABNZ when acquisition timing requires the full 200 kSPS rate of the AD976A. Choose AD976ANZ only when 100 kSPS is sufficient and the acquisition interval, filter response, and digital timing can accommodate the lower rate. Both use the 28-pin DIP family, but matching the package alone does not make their performance interchangeable.
Is AD976ABNZ suitable for medical monitoring and laboratory instrumentation?
AD976ABNZ can support medical monitoring and laboratory instrumentation applications that require moderate-speed, 16-bit conversion rather than high-frequency digitization. Its 200 kSPS throughput and -40 °C to +85 °C range suit many control and measurement circuits. Final suitability depends on signal bandwidth, acquisition time, isolation, safety requirements, and the applied medical standard.
How should the AD976ABNZ be handled for low-noise measurements?
The AD976ABNZ should be used with a stable reference, a properly settled analog input, and short, low-impedance interconnects. The manufacturer datasheet identifies the converter as factory calibrated, but total measurement accuracy still depends on source impedance, reference noise, grounding, clock jitter, and PCB layout. Follow the manufacturer application guidance for bypass capacitors and grounding.

エンジニアリング参考データ: AD976ABNZ — 比較、設計ガイダンス、コンプライアンス情報。

選定ガイド

Choose AD976ABNZ when the design specifically requires the AD976A family's 200 kSPS throughput in a 28-pin plastic DIP package. It is particularly appropriate for legacy industrial, laboratory, medical-monitoring, and automatic-test boards that need 16-bit parallel conversion and can use a single 5 V analog supply. AD976ANZ has the same package and parallel-interface family, but its 100 kSPS rate may be insufficient for timing-sensitive acquisition or control loops. If either part can meet the required throughput, the lower-rate AD976ANZ can simplify procurement through a broader exact-footprint selection. No verified cross-brand drop-in replacement was identified; converters with different pin counts, package types, or resolutions should be treated as redesign candidates rather than substitutions.

代替品との比較

パラメータ この製品 AD976ANZ
Brand Analog Devices Analog Devices
Package 28-pin plastic DIP 28-pin plastic DIP
Resolution 16 bit 16 bit
Throughput Rate 200 kSPS 100 kSPS
Architecture Successive-approximation ADC Successive-approximation ADC
Supply Voltage 5 V 5 V
Data Interface Parallel Parallel
Input Count 1 analog input 1 analog input
Reference Internal or external reference selection Internal or external reference selection

主な差別化要因

  • Higher conversion throughput (vs AD976ANZ)
  • Complete parallel data-conversion function (vs AD976ANZ)
  • Single-supply operation (vs AD976ANZ)

設計ノート

Do not treat the 28-pin DIP footprint as proof that every family member is timing-compatible. AD976ANZ uses the same physical format but samples at 100 kSPS rather than 200 kSPS. Before substituting it, recalculate the acquisition interval, conversion trigger schedule, input filter bandwidth, and any downstream buffer assumptions. This check is especially important in feedback systems where a doubled sampling interval can alter loop dynamics.

Ensure the analog source can settle to the required accuracy before each conversion. The source impedance and the converter's input capacitance form an RC network that may require more acquisition time than the nominal sampling interval. Use the manufacturer's acquisition-time and input-capacitance guidance to select the source impedance, add only the filtering required by the signal bandwidth, and place the input network close to the converter.

Route analog input, reference, and ground connections away from the 16 parallel digital output lines. Keep the analog ground return compact and connect it to the digital ground at a controlled point. Place reference and bypass capacitors near their associated pins, minimize loop area, and use a single solid ground plane unless the system documentation specifies a partitioned return arrangement.

コンプライアンス情報

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
鉛フリー
Unknown
ハロゲンフリー
Unknown
紛争鉱物
Unknown

No explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration was identified for this exact legacy 28-pin DIP ordering code. AEC-Q100 is classified as not applicable because the product is not identified as an automotive-qualified device.

データ検証日: 2026-11-15 — データはXAIPARTの部品エンジニアリングチームによって検証・管理されています

関連検索

AD976ABNZ datasheet AD976ABNZ specifications AD976ABNZ pinout AD976ABNZ datasheet pdf AD976ABNZ equivalent AD976ABNZ replacement AD976ABNZ cross reference AD976ABNZ vs AD976ANZ AD976ABNZ 28 pin DIP AD976ABNZ 200 kSPS ADC AD976ABNZ price AD976ABNZ stock Analog Devices AD976ABNZ AD976ABNZ application circuit

関連部品&用語

Analog Devices AD976ABNZ AD976ANZ AD976 AD976A ADC SAR ADC successive-approximation converter data-converter IC interface semiconductor parallel interface sample-and-hold on-chip clock internal reference external reference 16-bit resolution 200 kSPS throughput single 5 V supply 28-pin plastic DIP through-hole package industrial process measurement laboratory data acquisition medical monitoring automatic test equipment
クイック見積RFQ
詳細をすべてご記入ください — 営業チームが24時間以内にご返信いたします
部品番号 メーカー パッケージ QTY 目標価格 小計
✓
見積を送信しました!

24時間以内にメールでご返信いたします

1
RFQ送信済み
2
見積受領
3
注文済み
4
お支払い
5
発送済み
6
配達済み
RFQの詳細を表示