AD976ABNZ - 16-Bit 200 kSPS ADC | Analog Devices
MPN: AD976ABNZ ✗ Cuối đờiAD976ABNZ Tóm tắt
An ADC is an interface IC that converts a continuously varying analog voltage into a digital code suitable for processing by a microprocessor, DSP, FPGA, or control system. The AD976 belongs to the data-converter hierarchy: ADC → SAR ADC → data-converter IC → interface semiconductor. A successive-approximation converter uses an internal DAC and comparator to determine each output bit, making it practical for medium-speed instrumentation and control applications.
The principal characteristics of the AD976A include 16-bit resolution, 200 kSPS throughput, parallel digital output, and single 5 V operation. The AD976 version of the family operates at 100 kSPS, while the AD976A doubles the throughput to 200 kSPS. The AD976/AD976A architecture also supports selectable internal or external reference arrangements and includes factory calibration for offset, gain, SNR, and THD performance.
Because this is a bipolar converter, input signal range and reference voltage determine the available full-scale span. The parallel interface exposes the conversion result directly on dedicated data pins, avoiding serial-interface overhead at higher sample rates. An on-chip clock reduces the number of external timing components, while the integrated reference supports standalone operation when the required accuracy and range suit the application.
Typical uses include industrial process measurement, instrumentation, waveform analysis, laboratory data acquisition, medical monitoring, and embedded control systems. The 200 kSPS rate is suitable for capturing slowly varying or moderate-bandwidth analog signals rather than high-frequency communications waveforms. Its 28-pin through-hole package also favors legacy industrial and laboratory equipment where DIP sockets and through-hole assembly remain practical.
Designers should use the manufacturer pin-description and connection tables when assigning the parallel data, clock, reference, analog-input, and supply pins. Input-source impedance, acquisition time, reference stability, digital-bus timing, and analog grounding can affect conversion accuracy. Because a SAR ADC requires sufficient acquisition time, the sampling network must settle to the required accuracy before each conversion begins.
This product page combines the family specifications, verified distributor identification, package details, replacement analysis, and practical design guidance to provide a concise engineering reference for the AD976ABNZ. The 28-pin DIP construction and parallel 16-bit interface remain its defining features when evaluating legacy data-acquisition upgrades.
Bộ thay thế dễ dàng lắp đặt cho AD976ABNZ — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với AD976ABNZ (cùng hình factor và footprint) — khác nhau ở Architecture, Package, Sampling Rate.
AD976ANZ
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →AD976ABNZ Tỷ lệ tối đa & tính chất điện
| Độ phân giải | 16 bit |
| Tỷ lệ lấy mẫu | 200 kSPS |
| Input Count | 1 analog input |
| Architecture | Successive-approximation ADC |
| Điện áp cung cấp | 5 V |
| Data Interface | Parallel |
| Hộp | 28-pin plastic DIP |
| Package Width | 0.600 in (15.24 mm) |
| Nhiệt độ hoạt động | -40 °C to +85 °C |
| On-Chip Reference | Internal or external reference selection |
| On-Chip Clock | Yes |
| Factory Calibration | Offset, gain, SNR, and THD |
| Maximum Power Dissipation | 100 mW |
| Analog Input Type | Single-ended or differential input |
Hướng dẫn cấu hình chân AD976ABNZ 0.600 in (15.24 mm)
Cấu hình chân cho AD976ABNZ (0.600 in (15.24 mm) gói). Thành phần số hiệu này có chân đầu vào, đầu ra và nguồn cung cấp. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết cấu hình chân bù, bù trừ và chân kích hoạt. Hoàn hảo cho điều kiện tín hiệu và mạch khuếch đại.
Không có dữ liệu chân cụ thể sẵn có cho AD976ABNZ.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
AD976ABNZ phù hợp cho 6 Áp dụngs: Industrial Process Measurement, Laboratory Data Acquisition, Medical Monitoring Equipment, Waveform Analysis, Embedded Control Systems, Automatic Test Equipment.
Industrial Process Measurement
The AD976ABNZ fits industrial process-control front ends that need 16-bit conversion at up to 200 kSPS. It can digitize pressure, temperature, level, or flow signals after suitable conditioning, then present the result through its parallel interface to a microprocessor or DSP. The single 5 V supply simplifies system power planning, while the integrated reference and on-chip clock reduce external support components. Accurate measurement still depends on source settling during the acquisition interval, low-noise reference routing, and separation of analog and return currents on the PCB.
Được đề xuất
Laboratory Data Acquisition
For laboratory instruments, the AD976ABNZ provides a practical combination of 16-bit resolution, 200 kSPS throughput, and a parallel data interface. It is appropriate for capturing moderate-bandwidth waveforms, transducer outputs, and diagnostic signals when the acquisition rate does not need to exceed the converter's rated throughput. The on-chip clock and reference support a compact measurement chain, although laboratory designs should evaluate input bandwidth, reference accuracy, and connector noise separately. A shielded analog input and a stable ground-return arrangement improve repeatability.
Được đề xuất
Medical Monitoring Equipment
AD976ABNZ can serve as the ADC in medical monitoring equipment that acquires moderate-rate sensor waveforms and requires 16-bit digital resolution. Its 200 kSPS maximum rate is suitable for many pressure, flow, bio-potential conditioning, and physiological parameter signals after appropriate isolation and amplification. The -40 °C to +85 °C operating range supports conventional equipment environments. Medical suitability cannot be inferred from the converter alone; the complete system must meet the applicable safety, isolation, leakage, and signal-safety requirements for its intended use.
Được đề xuất
Waveform Analysis
The AD976ABNZ is useful in waveform-analysis instruments that must capture general-purpose analog signals with 16-bit resolution. Its 200 kSPS sampling capability provides more temporal resolution than the 100 kSPS AD976 configuration and suits vibration, positioning, control-loop, and transient measurements within the converter's bandwidth. The parallel output allows samples to be transferred efficiently to a digital processor. Designers should select an appropriate analog anti-alias filter, verify that the source can settle within the acquisition time, and use a low-jitter clock path when time-domain accuracy is important.
Được đề xuất
Embedded Control Systems
AD976ABNZ fits embedded control systems that monitor several slowly varying analog quantities through a multiplexed front end and require a deterministic parallel conversion interface. The 200 kSPS rate supports faster feedback loops than the 100 kSPS family option, while 16-bit resolution preserves fine detail in sensor readings. The 28-pin DIP construction is especially useful for legacy control boards using sockets or through-hole routing. Firmware must account for conversion timing, data settling, and any multiplexing interval, while the analog network must present a valid settled voltage before each conversion.
Được đề xuất
Automatic Test Equipment
AD976ABNZ is applicable to automatic test equipment that measures low-level or moderate-level analog outputs from boards and production fixtures. The 16-bit resolution supports accurate characterization, and the 200 kSPS throughput permits rapid sampling during automated test sequences. Its parallel interface can feed a controller or logic device without serial framing overhead. Fixture design remains critical because relay resistance, relay transients, long cable runs, and unstable references can dominate the converter's intrinsic accuracy. Place the input network close to the device and establish a controlled analog ground reference at the fixture.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho AD976ABNZ — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | AD976ANZ |
|---|---|---|
| Brand | Analog Devices | Analog Devices |
| Package | 28-pin plastic DIP | 28-pin plastic DIP |
| Resolution | 16 bit | 16 bit |
| Throughput Rate | 200 kSPS | 100 kSPS |
| Architecture | Successive-approximation ADC | Successive-approximation ADC |
| Supply Voltage | 5 V | 5 V |
| Data Interface | Parallel | Parallel |
| Input Count | 1 analog input | 1 analog input |
| Reference | Internal or external reference selection | Internal or external reference selection |
Bảo phân biệt quan trọng
- Higher conversion throughput (vsAD976ANZ)
- Complete parallel data-conversion function (vsAD976ANZ)
- Single-supply operation (vsAD976ANZ)
Ghi chú thiết kế
Do not treat the 28-pin DIP footprint as proof that every family member is timing-compatible. AD976ANZ uses the same physical format but samples at 100 kSPS rather than 200 kSPS. Before substituting it, recalculate the acquisition interval, conversion trigger schedule, input filter bandwidth, and any downstream buffer assumptions. This check is especially important in feedback systems where a doubled sampling interval can alter loop dynamics.
Ensure the analog source can settle to the required accuracy before each conversion. The source impedance and the converter's input capacitance form an RC network that may require more acquisition time than the nominal sampling interval. Use the manufacturer's acquisition-time and input-capacitance guidance to select the source impedance, add only the filtering required by the signal bandwidth, and place the input network close to the converter.
Route analog input, reference, and ground connections away from the 16 parallel digital output lines. Keep the analog ground return compact and connect it to the digital ground at a controlled point. Place reference and bypass capacitors near their associated pins, minimize loop area, and use a single solid ground plane unless the system documentation specifies a partitioned return arrangement.
Thông tin tuân thủ
No explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration was identified for this exact legacy 28-pin DIP ordering code. AEC-Q100 is classified as not applicable because the product is not identified as an automotive-qualified device.