ADA4530-1ARMZ - Femtoampere Bias Current Op Amp | Analog Devices
部品番号: ADA4530-1ARMZ ✓ 生産中| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $18.91 | $18.91 |
| 10 | $17.82 | $178.20 |
| 100 | $15.5 | $1,550.00 |
| 500 | $13.2 | $6,600.00 |
| 1,000 | $11.9 | $11,900.00 |
ADA4530-1ARMZ 概要
An operational amplifier (op amp) is a high-gain voltage amplifier with differential inputs and a single-ended output. It is a fundamental building block in analog signal conditioning, used to amplify, filter, or buffer signals. The ADA4530-1 belongs to the class of electrometer amplifiers, which are specialized op amps with extremely low input bias current, enabling accurate measurement of currents in the femtoampere range. This makes it a critical component in scientific instrumentation and medical diagnostics.
Key features of the ADA4530-1 include a low input bias current of 20 fA (max), a low offset voltage of 50 µV (max), and a low input voltage noise density of 12 nV/√Hz at 1 kHz. The device also offers a gain bandwidth product of 4 MHz and a slew rate of 2.2 V/µs, providing adequate speed for many precision applications. The rail-to-rail output stage allows maximum dynamic range, and the input common-mode range extends to the negative rail, facilitating single-supply operation.
The ADA4530-1 uses low voltage MOS devices in its differential input stage, which provide better 1/f noise and bandwidth per unit current compared to high voltage devices. This architecture enables the ultra-low bias current while maintaining good noise performance. The device also includes an internal guard buffer that can be used to drive guard rings on the PCB, further reducing leakage currents.
Typical applications include photodiode amplifiers, ion sensors, pH meters, and other high-impedance sensor interfaces. The device is also used in mass spectrometry, chromatography, and other analytical instruments where measuring tiny currents is essential. Its low bias current and low noise make it suitable for precision current-to-voltage conversion in these systems.
When designing with the ADA4530-1, it is critical to implement proper guard ring layout and use high-quality insulating materials to minimize leakage currents. The PCB should be cleaned thoroughly to remove flux residues, and a guard ring driven by the internal guard buffer should surround the input pins. This ensures that the femtoampere bias current specification is achieved in practice.
ドロップイン代替品: ADA4530-1ARMZ — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: ADA4530-1ARMZ （同一形状・フットプリント） — 相違点: Amplifier Type, Gain Bandwidth Product, Slew Rate.
クイック比較ツール — 並列比較する代替部品を選択:
ADA4530-1ARMZ-R7
✅ ドロップイン📋 参考代替品（カタログ未掲載）
ADA4530-1ARMZ 最大定格＆電気的特性
| Amplifier Type | Electrometer (General Purpose) |
| Number of Circuits | 1 |
| 出力タイプ | Rail-to-Rail |
| Slew Rate | 2.2 V/µs |
| Gain Bandwidth Product | 4 MHz |
| Input Bias Current (Max) | 20 fA at 25°C |
| Input Offset Voltage (Max) | 50 µV |
| Input Voltage Noise Density | 12 nV/√Hz at 1 kHz |
| Supply Voltage - Single | 4.5 V to 16 V |
| Supply Voltage - Dual | ±2.25 V to ±8 V |
| Supply Current (Typ) | 0.9 mA |
| 動作温度範囲 | -40°C to +125°C |
| パッケージ | 8-Lead MSOP (ARMZ) |
| 実装タイプ | Surface Mount |
| RoHS ステータス | Compliant |
ADA4530-1ARMZ ピン構成
| ピン 1 | OUT — Output |
| ピン 2 | V- — Negative supply |
| ピン 3 | +IN — Non-inverting input |
| ピン 4 | -IN — Inverting input |
| ピン 5 | GUARD — Guard buffer output |
| ピン 6 | V+ — Positive supply |
| ピン 7 | NC — No connect |
| ピン 8 | NC — No connect |
主な用途
ADA4530-1ARMZ の用途: 6 件s: Photodiode Amplifier, Ion Sensor Interface, pH Meter, Mass Spectrometry, Chromatography, High-Impedance Sensor Buffer.
Photodiode Amplifier
The ADA4530-1ARMZ's 20 fA input bias current and low noise make it ideal for photodiode amplification. It converts the small photocurrent into a voltage with minimal error, enabling accurate light measurement in applications such as spectroscopy and fiber optic monitoring. The internal guard buffer helps reduce leakage currents, ensuring femtoampere-level accuracy.
おすすめ
Ion Sensor Interface
In ion sensors, the ADA4530-1ARMZ amplifies the tiny currents generated by ion-selective electrodes. Its ultra-low bias current prevents loading of the high-impedance sensor, while its rail-to-rail output maximizes dynamic range. The device's low offset voltage ensures accurate measurement of ion concentrations in chemical analysis and environmental monitoring.
おすすめ
pH Meter
The ADA4530-1ARMZ is used in pH meters to amplify the high-impedance signal from a pH electrode. Its 20 fA bias current minimizes measurement error, and its low noise ensures stable readings. The device operates from a single 5V supply, making it suitable for portable pH meters. The internal guard buffer simplifies PCB layout for leakage reduction.
おすすめ
Mass Spectrometry
In mass spectrometry, the ADA4530-1ARMZ amplifies the tiny ion currents detected by the instrument. Its femtoampere bias current and low noise are critical for detecting low-abundance ions. The device's wide supply voltage range allows integration into various spectrometer designs. The guard buffer helps maintain accuracy in high-impedance environments.
おすすめ
Chromatography
The ADA4530-1ARMZ is used in chromatography detectors to amplify the small currents from electrochemical or conductivity detectors. Its low bias current and low offset voltage ensure accurate quantification of analytes. The device's rail-to-rail output allows direct interface to ADCs. The internal guard buffer reduces leakage, improving detection limits.
おすすめ
High-Impedance Sensor Buffer
The ADA4530-1ARMZ serves as a buffer for high-impedance sensors such as piezoelectric or capacitive sensors. Its 20 fA bias current prevents loading, and its low noise preserves signal integrity. The device's wide bandwidth of 4 MHz supports dynamic signals. The guard buffer simplifies PCB design for leakage minimization.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: ADA4530-1ARMZ — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | ADA4530-1ARZ | ADA4530-1ARMZ-R7 | OPA928 |
|---|---|---|---|---|
| Package | 8-Lead MSOP | 8-Lead SOIC | 8-Lead MSOP | 8-Lead SOIC |
| Brand | Analog Devices | Analog Devices | Analog Devices | Texas Instruments |
| Input Bias Current (Max) | 20 fA | 20 fA | 20 fA | 20 fA |
| Gain Bandwidth Product | 4 MHz | 4 MHz | 4 MHz | 0.7 MHz |
| Supply Voltage Range | 4.5V to 16V | 4.5V to 16V | 4.5V to 16V | 4.5V to 16V |
| Input Offset Voltage (Max) | 50 µV | 50 µV | 50 µV | 50 µV |
| Slew Rate | 2.2 V/µs | 2.2 V/µs | 2.2 V/µs | 0.4 V/µs |
| Price (1pc) | $18.91 | $18.91 | $18.91 | $15.00 |
主な差別化要因
- Ultra-low input bias current of 20 fA （vs OPA928)
- Internal guard buffer （vs LMP7721)
- Wide supply voltage range up to 16V （vs OPA928)
設計ノート
To achieve femtoampere bias current, use guard rings around the input pins. Connect the guard ring to the GUARD pin (pin 5) to drive the ring at the same potential as the inputs, minimizing leakage. Use high-quality insulating materials and clean the PCB thoroughly to remove flux residues.
Keep the input traces as short as possible and shield them from noise sources. The unique pinout of the ADA4530-1 is optimized to prevent coupling between sensitive inputs and power/output pins. Follow the layout recommendations in the AN-1373 Application Note for best performance.
Use low-noise power supplies and bypass each supply pin with a 0.1 µF ceramic capacitor close to the device. For dual-supply operation, ensure proper decoupling of both V+ and V- pins. The supply current is typically 0.9 mA, so power dissipation is minimal.
コンプライアンス情報
RoHS compliant per Analog Devices product page. AEC-Q100 not applicable for this non-automotive part.
