ADA4530-1ARMZ - Femtoampere Bias Current Op Amp | Analog Devices
料号： ADA4530-1ARMZ ✓ 量产中| 数量 | 单价 | 小计 |
|---|---|---|
| 1 | $18.91 | $18.91 |
| 10 | $17.82 | $178.20 |
| 100 | $15.5 | $1,550.00 |
| 500 | $13.2 | $6,600.00 |
| 1,000 | $11.9 | $11,900.00 |
ADA4530-1ARMZ 概述
An operational amplifier (op amp) is a high-gain voltage amplifier with differential inputs and a single-ended output. It is a fundamental building block in analog signal conditioning, used to amplify, filter, or buffer signals. The ADA4530-1 belongs to the class of electrometer amplifiers, which are specialized op amps with extremely low input bias current, enabling accurate measurement of currents in the femtoampere range. This makes it a critical component in scientific instrumentation and medical diagnostics.
Key features of the ADA4530-1 include a low input bias current of 20 fA (max), a low offset voltage of 50 µV (max), and a low input voltage noise density of 12 nV/√Hz at 1 kHz. The device also offers a gain bandwidth product of 4 MHz and a slew rate of 2.2 V/µs, providing adequate speed for many precision applications. The rail-to-rail output stage allows maximum dynamic range, and the input common-mode range extends to the negative rail, facilitating single-supply operation.
The ADA4530-1 uses low voltage MOS devices in its differential input stage, which provide better 1/f noise and bandwidth per unit current compared to high voltage devices. This architecture enables the ultra-low bias current while maintaining good noise performance. The device also includes an internal guard buffer that can be used to drive guard rings on the PCB, further reducing leakage currents.
Typical applications include photodiode amplifiers, ion sensors, pH meters, and other high-impedance sensor interfaces. The device is also used in mass spectrometry, chromatography, and other analytical instruments where measuring tiny currents is essential. Its low bias current and low noise make it suitable for precision current-to-voltage conversion in these systems.
When designing with the ADA4530-1, it is critical to implement proper guard ring layout and use high-quality insulating materials to minimize leakage currents. The PCB should be cleaned thoroughly to remove flux residues, and a guard ring driven by the internal guard buffer should surround the input pins. This ensures that the femtoampere bias current specification is achieved in practice.
直接替换替代料： ADA4530-1ARMZ ——相同封装，引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号： ADA4530-1ARMZ （相同外形与封装尺寸） ——差异在于 Amplifier Type, Gain Bandwidth Product, Slew Rate.
快速对比工具——选择替代料号进行并排对比：
ADA4530-1ARMZ-R7
✅ 直接替换📋 参考替代料（不在目录中）
ADA4530-1ARMZ 最大额定值与电气特性
| Amplifier Type | Electrometer (General Purpose) |
| Number of Circuits | 1 |
| 输出类型 | Rail-to-Rail |
| Slew Rate | 2.2 V/µs |
| Gain Bandwidth Product | 4 MHz |
| Input Bias Current (Max) | 20 fA at 25°C |
| Input Offset Voltage (Max) | 50 µV |
| Input Voltage Noise Density | 12 nV/√Hz at 1 kHz |
| Supply Voltage - Single | 4.5 V to 16 V |
| Supply Voltage - Dual | ±2.25 V to ±8 V |
| Supply Current (Typ) | 0.9 mA |
| 工作温度范围 | -40°C to +125°C |
| 封装 | 8-Lead MSOP (ARMZ) |
| 安装类型 | Surface Mount |
| RoHS 状态 | Compliant |
ADA4530-1ARMZ 引脚配置
| 引脚 1 | OUT — Output |
| 引脚 2 | V- — Negative supply |
| 引脚 3 | +IN — Non-inverting input |
| 引脚 4 | -IN — Inverting input |
| 引脚 5 | GUARD — Guard buffer output |
| 引脚 6 | V+ — Positive supply |
| 引脚 7 | NC — No connect |
| 引脚 8 | NC — No connect |
典型应用
ADA4530-1ARMZ 适用于 6 应用s: Photodiode Amplifier, Ion Sensor Interface, pH Meter, Mass Spectrometry, Chromatography, High-Impedance Sensor Buffer.
Photodiode Amplifier
The ADA4530-1ARMZ's 20 fA input bias current and low noise make it ideal for photodiode amplification. It converts the small photocurrent into a voltage with minimal error, enabling accurate light measurement in applications such as spectroscopy and fiber optic monitoring. The internal guard buffer helps reduce leakage currents, ensuring femtoampere-level accuracy.
推荐
Ion Sensor Interface
In ion sensors, the ADA4530-1ARMZ amplifies the tiny currents generated by ion-selective electrodes. Its ultra-low bias current prevents loading of the high-impedance sensor, while its rail-to-rail output maximizes dynamic range. The device's low offset voltage ensures accurate measurement of ion concentrations in chemical analysis and environmental monitoring.
推荐
pH Meter
The ADA4530-1ARMZ is used in pH meters to amplify the high-impedance signal from a pH electrode. Its 20 fA bias current minimizes measurement error, and its low noise ensures stable readings. The device operates from a single 5V supply, making it suitable for portable pH meters. The internal guard buffer simplifies PCB layout for leakage reduction.
推荐
Mass Spectrometry
In mass spectrometry, the ADA4530-1ARMZ amplifies the tiny ion currents detected by the instrument. Its femtoampere bias current and low noise are critical for detecting low-abundance ions. The device's wide supply voltage range allows integration into various spectrometer designs. The guard buffer helps maintain accuracy in high-impedance environments.
推荐
Chromatography
The ADA4530-1ARMZ is used in chromatography detectors to amplify the small currents from electrochemical or conductivity detectors. Its low bias current and low offset voltage ensure accurate quantification of analytes. The device's rail-to-rail output allows direct interface to ADCs. The internal guard buffer reduces leakage, improving detection limits.
推荐
High-Impedance Sensor Buffer
The ADA4530-1ARMZ serves as a buffer for high-impedance sensors such as piezoelectric or capacitive sensors. Its 20 fA bias current prevents loading, and its low noise preserves signal integrity. The device's wide bandwidth of 4 MHz supports dynamic signals. The guard buffer simplifies PCB design for leakage minimization.
推荐
推荐产品汇总
工程参考数据： ADA4530-1ARMZ ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | ADA4530-1ARZ | ADA4530-1ARMZ-R7 | OPA928 |
|---|---|---|---|---|
| Package | 8-Lead MSOP | 8-Lead SOIC | 8-Lead MSOP | 8-Lead SOIC |
| Brand | Analog Devices | Analog Devices | Analog Devices | Texas Instruments |
| Input Bias Current (Max) | 20 fA | 20 fA | 20 fA | 20 fA |
| Gain Bandwidth Product | 4 MHz | 4 MHz | 4 MHz | 0.7 MHz |
| Supply Voltage Range | 4.5V to 16V | 4.5V to 16V | 4.5V to 16V | 4.5V to 16V |
| Input Offset Voltage (Max) | 50 µV | 50 µV | 50 µV | 50 µV |
| Slew Rate | 2.2 V/µs | 2.2 V/µs | 2.2 V/µs | 0.4 V/µs |
| Price (1pc) | $18.91 | $18.91 | $18.91 | $15.00 |
关键差异点
- Ultra-low input bias current of 20 fA （对比 OPA928)
- Internal guard buffer （对比 LMP7721)
- Wide supply voltage range up to 16V （对比 OPA928)
设计说明
To achieve femtoampere bias current, use guard rings around the input pins. Connect the guard ring to the GUARD pin (pin 5) to drive the ring at the same potential as the inputs, minimizing leakage. Use high-quality insulating materials and clean the PCB thoroughly to remove flux residues.
Keep the input traces as short as possible and shield them from noise sources. The unique pinout of the ADA4530-1 is optimized to prevent coupling between sensitive inputs and power/output pins. Follow the layout recommendations in the AN-1373 Application Note for best performance.
Use low-noise power supplies and bypass each supply pin with a 0.1 µF ceramic capacitor close to the device. For dual-supply operation, ensure proper decoupling of both V+ and V- pins. The supply current is typically 0.9 mA, so power dissipation is minimal.
合规信息
RoHS compliant per Analog Devices product page. AEC-Q100 not applicable for this non-automotive part.
