ADC121S051CIMFX - 12-Bit 500ksps SAR ADC | SOT-23-6 | TI
部品番号: ADC121S051CIMFX ✓ 生産中| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $3.85 | $3.85 |
| 10 | $3.47 | $34.70 |
| 100 | $2.98 | $298.00 |
| 500 | $2.41 | $1,205.00 |
| 1,000 | $1.95 | $1,950.00 |
ADC121S051CIMFX 概要
A SAR ADC is a type of data converter that uses a binary search algorithm across an internal capacitive DAC to resolve each input sample in N conversion clock cycles, where N equals the bit resolution. As a 12-bit SAR ADC, the ADC121S051 belongs to the broader ADC family (which also includes delta-sigma, pipeline, and flash converters) and to the data-converter sub-category of mixed-signal integrated circuits. SAR converters are favored for their deterministic latency, low power consumption, and ability to capture single-shot or multiplexed signals without complex digital filtering.
The ADC121S051CIMFX delivers 12-bit resolution with ±1 LSB INL/DNL (max) and 71 dB SINAD typical at 100 kHz input, with an integral nonlinearity of 0.45 LSB typical. It supports a single-ended analog input on channel 0 with an input range of 0 V to V_A, integrates an internal 2.5 V reference option (or accepts an external reference), and draws only 1.5 mW at 200 ksps from a 3 V supply. The compact SOT-23-6 footprint makes it one of the smallest 12-bit SAR ADCs in its class, ideal for space-constrained sensor-interface boards.
Typical applications include industrial process-control front ends, portable battery-powered instrumentation, optical-module monitoring, motor-control feedback, and general-purpose data acquisition. The 6-lead SOT-23-6 package supports surface-mount reflow and is qualified for -40 °C to +85 °C operation. A drop-in compatible /NOPB variant (lead-free, RoHS-compliant) is available for production builds requiring modern compliance status.
When laying out the PCB, keep the analog input trace short and guard it with a ground plane, place a 0.1 µF decoupling capacitor within 3 mm of the V_A pin, and route the SPI clock away from the analog input to avoid coupling. Ensure the SCLK idle-low polarity is respected in firmware, and confirm reference stability if you switch between internal and external references mid-conversion.
This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, including cross-brand equivalents verified through independent distributor listings.
ドロップイン代替品: ADC121S051CIMFX — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: ADC121S051CIMFX （同一形状・フットプリント） — 相違点: Package, Resolution, Operating Temperature, Operating Temperature Range, Architecture.
クイック比較ツール — 並列比較する代替部品を選択:
ADC121S051CIMFX/NOPB
✅ ドロップイン📋 参考代替品（カタログ未掲載）
ADC121S051CISDX/NOPB
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品（カタログ未掲載）
ADC121S101CIMFX/NOPB
✅ ドロップイン📋 参考代替品（カタログ未掲載）
ADC101S021CIMFX
✅ ドロップイン✓ 在庫あり
$1.4 / 個
データシートを見る →ADC121S051CIMF/NOPB
✅ ドロップイン📋 参考代替品（カタログ未掲載）
ADC121S051CIMFX 最大定格＆電気的特性
| Number of Bits | 12 |
| サンプリングレート | 200 to 500 ksps |
| Number of Input Channels | 1 |
| Architecture | SAR (Successive Approximation Register) |
| Input Type | Single-ended |
| Data Interface | SPI, QSPI, MICROWIRE, DSP-compatible serial |
| Supply Voltage (V_A, V_D) | 2.7 V to 5.25 V (single supply) |
| Analog Input Range | 0 V to V_A |
| Reference | Internal 2.5 V or external (V_A-based) |
| INL（積分非直線性） | ±0.45 LSB typical, ±1 LSB max |
| DNL (Differential Nonlinearity) | ±0.4 LSB typical, ±1 LSB max (no missing codes) |
| SINAD | 71 dB typical at 100 kHz input |
| Power Consumption | 1.5 mW typical at 200 ksps, 3 V |
| 動作温度範囲 | -40 °C to +85 °C |
| パッケージ | SOT-23-6 (DBV) |
| 実装タイプ | Surface Mount |
| MSLレベル | 1 |
| RoHS Status (base MPN) | non-compliant (non-/NOPB suffix); /NOPB variant is compliant |
ADC121S051CIMFX ピン構成
| ピン 1 | VA — Analog supply voltage (2.7 V to 5.25 V) |
| ピン 2 | VIN — Analog input (single-ended, 0 V to VA) |
| ピン 3 | GND — Ground |
| ピン 4 | SCLK — Serial clock input (SPI, idle low) |
| ピン 5 | DOUT — Serial data output (SPI, MSB first) |
| ピン 6 | CS — Chip select (active low) |
主な用途
ADC121S051CIMFX の用途: 6 件s: Industrial Process-Control Analog Front End, Portable Battery-Powered Instrumentation, Optical Module Monitoring (SFP/QSFP), BLDC Motor Control Feedback, General-Purpose Data Acquisition Modules, Consumer Audio Front-End (Volume Knob / Keypad Sensing).
Industrial Process-Control Analog Front End
The ADC121S051CIMFX is well-suited for industrial 4-20 mA loop monitoring and PLC analog-input modules. Its 12-bit resolution with ±1 LSB INL provides roughly 0.024% full-scale accuracy, sufficient for closed-loop process control where 0.1% measurement repeatability is the norm. The 2.7-5.25 V single supply aligns with both 3.3 V and 5 V industrial backplanes, and the SPI interface ties directly to common MCUs such as the TI MSP430 and STM32 families. The 500 ksps sample rate allows 16x oversampling to push effective resolution to ~14 bits if needed. The -40 °C to +85 °C operating range covers most factory-floor environments, and the SOT-23-6 footprint keeps the analog section small enough to fit on sensor interface cards. The /NOPB variant should be specified for new industrial designs in 2026 to satisfy RoHS requirements.
おすすめ
Portable Battery-Powered Instrumentation
The ADC121S051CIMFX draws only 1.5 mW at 200 ksps from a 3 V supply, making it attractive for handheld multimeters, portable environmental monitors, and battery-powered data loggers. The 200-500 ksps sample-rate range lets firmware throttle the conversion rate to further reduce power when high sample rates are unnecessary. The SOT-23-6 footprint is one of the smallest 12-bit SAR ADC packages available, freeing PCB area for the battery and BLE module. The 2.7 V minimum supply enables direct 3 V coin-cell or single-cell Li-ion operation without an LDO. The internal 2.5 V reference option eliminates an external reference IC, further reducing BOM cost and quiescent current. For lowest power, the /NOPB variant is electrically identical and recommended for compliance.
おすすめ
Optical Module Monitoring (SFP/QSFP)
The ADC121S051CIMFX is well-suited to SFP and QSFP transceiver module monitoring, where temperature, laser bias current, and receive power must be sampled for digital diagnostics (DDMI). The single-ended analog input accepts the output of a transimpedance amplifier or a current-sense resistor divider directly. The 500 ksps sample rate exceeds the typical 10-100 Hz DDMI update rate, providing ample oversampling margin. The 6-pin SOT-23-6 package fits within the cramped SFP module form factor, and the SPI interface is a natural match for the module's small MCU. The internal 2.5 V reference eliminates an external reference IC, important when board area is at a premium. The /NOPB variant is the production-grade choice for RoHS-compliant optical modules shipped in 2026.
おすすめ
BLDC Motor Control Feedback
In brushless DC (BLDC) and permanent-magnet synchronous motor (PMSM) control, the ADC121S051CIMFX can sample DC-link current, phase voltage, or potentiometer-position feedback into a microcontroller running a Field-Oriented Control (FOC) algorithm. The 500 ksps sample rate supports PWM frequencies up to ~100 kHz with a comfortable margin. The 12-bit resolution provides approximately 0.024% full-scale accuracy, sufficient for torque-loop control in mid-power motor drives. The 2.7-5.25 V supply range is compatible with the 3.3 V rails common on motor-control MCUs. The single-ended input simplifies signal conditioning by allowing direct resistive dividers. The SOT-23-6 package fits on compact integrated power modules. For high-side current sensing, an external op-amp such as the OPA2333 buffers the input.
おすすめ
General-Purpose Data Acquisition Modules
The ADC121S051CIMFX is a strong fit for low-channel-count, low-cost data-acquisition modules used in test equipment, lab instrumentation, and educational hardware. Its 12-bit resolution, 500 ksps sample rate, and SPI interface are sufficient for sampling audio-bandwidth signals up to 200 kHz, allowing general-purpose DAQ to cover audio, vibration, and sensor-bridge applications. The single-ended analog input accepts the output of front-end signal-conditioning amplifiers. The 6-pin SOT-23-6 footprint makes the ADC a drop-in addition to existing MCU evaluation boards. The 2.7-5.25 V supply range allows the same hardware to run from USB or battery. For high-channel-count systems, multiple ADC121S051CIMFX devices can be addressed via separate chip-select lines. The /NOPB variant is the production-grade choice for compliance.
おすすめ
Consumer Audio Front-End (Volume Knob / Keypad Sensing)
The ADC121S051CIMFX can digitize the wiper voltage of a volume-control potentiometer or a resistor-ladder keypad matrix in consumer audio products, replacing analog muxes and reducing pin count on the host MCU. The 12-bit resolution provides 4096 discrete steps across the 0-V_A input range, more than enough for smooth volume ramping. The 200 ksps lower sample-rate limit keeps noise low for DC-style measurements. The 1.5 mW typical power consumption is negligible in mains-powered audio gear. The SOT-23-6 package fits behind a front-panel knob without board real-estate issues. The internal 2.5 V reference option simplifies the analog supply chain. For battery-powered portable audio, the /NOPB variant maintains identical performance while meeting RoHS and lead-free requirements.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: ADC121S051CIMFX — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | ADC121S051CIMFX/NOPB | ADC121S101CIMFX/NOPB | ADC101S021CIMFX |
|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | SOT-23-6 (DBV) | SOT-23-6 (DBV) - same | SOT-23-6 (DBV) - same | SOT-23-6 (DBV) - same |
| Resolution | 12 bit | 12 bit | 10 bit | 10 bit |
| Sampling Rate | 200 to 500 ksps | 200 to 500 ksps | 200 to 500 ksps | 200 to 500 ksps |
| Supply Voltage | 2.7 V to 5.25 V | 2.7 V to 5.25 V | 2.7 V to 5.25 V | 2.7 V to 5.25 V |
| Architecture | SAR | SAR | SAR | SAR |
| Input Channels | 1 | 1 | 1 | 1 |
| Data Interface | SPI / QSPI / MICROWIRE | SPI / QSPI / MICROWIRE | SPI / QSPI / MICROWIRE | SPI / QSPI / MICROWIRE |
| RoHS Status | Non-compliant (use /NOPB) | Compliant | Compliant | Compliant |
| Operating Temperature | -40 °C to +85 °C | -40 °C to +85 °C | -40 °C to +85 °C | -40 °C to +85 °C |
主な差別化要因
- Drop-in 12-bit replacement with full datasheet compatibility （vs ADC121S051CIMFX/NOPB)
- SOT-23-6 footprint matches the TI SAR ADC family （vs ADC101S021CIMFX)
- Higher sample rate than the 8-pin SOIC alternatives （vs ADC121S021CISD (8-SOIC))
設計ノート
Place a 0.1 µF ceramic decoupling capacitor within 3 mm of the VA pin (pin 1), with the trace to the VA pin kept short and wide. Add a 10 µF bulk capacitor on the supply rail nearby. The SOT-23-6 thermal pad is not present on this part, so layout priority is analog-supply decoupling, not thermal dissipation. Keep the analog input trace (pin 2) guarded with a ground plane on both sides and away from the SPI clock line (pin 4) to avoid digital-to-analog coupling. The CS line (pin 6) should be routed away from the analog input to prevent glitches during the chip-select transition.
Do not confuse the SOT-23-6 outline with other 6-pin SOT-23-6 parts (LDO regulators, op-amps, references). The laser marking on the top of the package should read '121S051' to confirm correct placement. Be aware that the base MPN ADC121S051CIMFX is non-RoHS; for any 2026 production build use the /NOPB (RoHS-compliant, lead-free) variant to satisfy environmental regulations. Ensure the SPI mode is mode 0 (CPOL=0, CPHA=0) on the host MCU; the ADC121S051 samples on the rising SCLK edge and shifts data out on the falling edge.
Estimated: at 3 V VA and 200 ksps, the ADC121S051CIMFX draws approximately 0.5 mA from the VA supply (1.5 mW / 3 V). At 500 ksps and 5 V, the current roughly doubles. To keep the analog input noise low, source the VA pin from a low-noise LDO rather than the digital 3.3 V rail directly; recommended LDOs include the TI TPS7A45xx or TPS7A20-series. Place a small ferrite bead between the digital supply and the analog VA pin if the two rails must share, and add a 10 µF + 0.1 µF decoupling pair at the IC.
コンプライアンス情報
Base ADC121S051CIMFX is non-RoHS and contains lead; for RoHS/lead-free production use the /NOPB variant. The /NOPB variant is RoHS compliant, lead-free, and Reach compliant. Not AEC-Q100 qualified; for automotive applications consider the AEC-Q100-qualified TI ADC family members. Conflict-minerals compliance per TI declarations on the product page.