ADF4153ABRUZ - 4 GHz Fractional-N RF Synthesizer | Analog Devices
部品番号: ADF4153ABRUZ ✓ 生産中ADF4153ABRUZ 概要
A fractional-N frequency synthesizer is a phase-locked-loop device that generates a stable output frequency by phase-locking a voltage-controlled oscillator to a reference source. In the wider semiconductor hierarchy, the ADF4153 belongs to the clock and timing IC category, then to phase-locked loops and frequency synthesizers. This architecture supports rational frequency ratios that allow a desired RF output to be produced with a reference frequency that may not divide it exactly.
The ADF4153ABRUZ combines a low-noise digital phase-frequency detector, precision frequency dividers, and fractional-N control logic for programmable RF synthesis. Its stated operating input span extends from 10 MHz to 4 GHz, while the maximum synthesis frequency is 4 GHz. The 16-lead TSSOP package supports compact surface-mount implementation, and the narrow 4.40 mm package width is useful in space-constrained radio modules.
The fractional-N architecture is particularly relevant to local oscillators in wireless receivers and transmitters. It allows the phase detector and loop filter to operate at a comparatively low reference-related frequency while maintaining a high synthesized output. Design evaluation must account for loop-filter bandwidth, phase noise, reference purity, integer and fractional divider settings, and the required output frequency. Those operating details should be configured with the manufacturer’s frequency-planning and register settings.
Typical uses include cellular and wireless infrastructure, radio transceivers, microwave downconverters, and upconverters. The device can also serve closed-loop RF systems where the local oscillator must track a programmable channel plan. Its frequency ceiling makes it applicable to 4 GHz-class signal paths when the selected divider, reference, and loop-filter settings support the required channel spacing.
Place decoupling capacitors close to the supply pins and route the reference and feedback paths as controlled-impedance traces with minimal parasitic coupling. Validate the phase-noise and spur performance across operating temperature because fractional-N operation, reference multiplication, and loop-filter settings influence the resulting spectrum.
This product page combines the manufacturer’s device description, exact-ordering information, drop-in candidates, and application-specific engineering guidance. It also distinguishes confirmed package and frequency facts from parameters that require validation in the ADF4153 datasheet and application-specific reference design.
ドロップイン代替品: ADF4153ABRUZ — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: ADF4153ABRUZ (同一形状・フットプリント) — 相違点: Package, Charge Pump, Product Type, REACH Status, RoHS Status.
ADF4153BRUZ
✅ ドロップイン ⚠️ 仕様未検証価格はお問い合わせください
データシートを見る →ADF4154BRU
✅ ドロップイン価格はお問い合わせください
データシートを見る →ADF4154BRUZ
✅ ドロップイン ⚠️ 仕様未検証価格はお問い合わせください
データシートを見る →ADF4155BRUZ
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品(カタログ未掲載)
ADF4153ABRUZ 仕様
| Product Type | Fractional-N frequency synthesizer |
| Maximum Synthesis Frequency | 4 GHz |
| Input Frequency Range | 10 MHz to 4 GHz |
| Architecture | Fractional-N phase-locked loop |
| パッケージ | 16-lead TSSOP, 0.173 inch (4.40 mm) width |
| 実装タイプ | Surface mount |
| Orderable Package Suffix | RUZ |
| Production Status | Production |
| RoHS ステータス | unknown |
| REACH Status | unknown |
ADF4153ABRUZ ruz ピン配置ガイド
ADF4153ABRUZ (ruz パッケージ) のピン配置。 ピン番号、機能、接続図はメーカーのデータシートで定義されています。正確なフットプリントとはんだ付けのガイドラインについては、データシートを参照してください。
詳細なピン配置データはありません: ADF4153ABRUZ.
詳細は データシート をご参照ください。
主な用途
ADF4153ABRUZ の用途: 6 件s: Wireless Transmitter Local Oscillator, Wireless Receiver Downconverter, Microwave RF Signal Generator, Point-to-Point RF Data Link, RF Test and Measurement Module, Industrial Radio Equipment.
Wireless Transmitter Local Oscillator
The ADF4153ABRUZ fits a wireless transmitter local-oscillator block because it generates programmable fractional-N frequencies up to 4 GHz while accepting references within a 10 MHz to 4 GHz input range. Place it between the stable reference source and the RF upconverter so the channel frequency can be selected through the divider and fractional-N configuration. The 16-lead TSSOP footprint supports compact radio modules, although its 4.40 mm width still requires careful placement. Verify phase noise, reference multiplication, lock range, and adjacent-channel spurs against the transmitter mask before production.
おすすめ
Wireless Receiver Downconverter
In a wireless receiver downconverter, the ADF4153ABRUZ can generate the local oscillator required by an RF mixing stage. Its 4 GHz maximum synthesis frequency covers 4 GHz-class downconversion requirements, while fractional-N division provides a practical way to derive many channel frequencies from a stable reference. The synthesizer must be planned around the selected feedback and reference dividers, and the loop filter must meet the receiver’s phase-noise requirements. A 16-lead TSSOP arrangement also keeps the device suitable for compact radio and gateway hardware.
おすすめ
Microwave RF Signal Generator
The ADF4153ABRUZ can serve as the tunable oscillator core of a compact microwave signal-generation system. Its fractional-N phase-locked-loop architecture supports programmable RF outputs up to 4 GHz from a 10 MHz to 4 GHz input range, allowing the output frequency to be changed through the synthesizer’s divider and fractional-N settings. The 16-lead TSSOP package facilitates dense instrument or test-module layouts. For useful results, the reference oscillator must have adequate frequency stability and phase noise, while the external loop filter and supply network require careful RF layout.
おすすめ
Point-to-Point RF Data Link
A point-to-point RF data link can use the ADF4153ABRUZ to synthesize the transmit or receive local oscillator required by a 4 GHz-class RF channel. Fractional-N operation allows the frequency plan to use a fixed reference while supporting multiple channel assignments, reducing the need for multiple separate oscillator packages. The design must ensure that the chosen divider and VCO frequency remain valid at both channel extremes and that the loop-filter bandwidth balances lock time against phase noise. The 16-lead TSSOP footprint is practical for compact outdoor and industrial radio units.
おすすめ
RF Test and Measurement Module
The ADF4153ABRUZ is suitable for a compact RF test module that requires a programmable local source across part of the 4 GHz range. Its fractional-N architecture permits channel frequencies to be derived from a stable reference without changing the reference oscillator, while the 16-lead TSSOP package helps preserve instrument-panel space. For measurement accuracy, evaluate the synthesizer’s phase noise and spurious outputs over the required bandwidth, and isolate the reference from digital and switching circuitry. The loop filter and RF output network remain central to achieving predictable spectral performance.
おすすめ
Industrial Radio Equipment
Industrial radio equipment can use the ADF4153ABRUZ for programmable local-oscillator generation when a stable 4 GHz-class RF source is required. Its 10 MHz to 4 GHz input range supports several reference-distribution arrangements, while fractional-N synthesis allows channel selection from a common oscillator. The TSSOP-16 package is suitable for automated surface-mount assembly and compact control boards. Engineers should validate temperature drift, lock time, reference isolation, and spectral purity in the final enclosure because adjacent switching regulators and digital circuitry can degrade otherwise acceptable oscillator performance.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: ADF4153ABRUZ — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | ADF4153BRUZ | ADF4154BRU | ADF4154BRUZ | ADF4155BRUZ |
|---|---|---|---|---|---|
| Package | TSSOP-16, 4.40 mm width | TSSOP-16 | TSSOP-16 | TSSOP-16 | TSSOP-16 |
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Synthesis Architecture | Fractional-N frequency synthesizer | Fractional-N frequency synthesizer | Fractional-N frequency synthesizer | Fractional-N frequency synthesizer | Fractional-N frequency synthesizer |
主な差別化要因
- Directly matches the 4 GHz target frequency class (vs ADF4153BRUZ)
- Known Analog Devices fractional-N implementation (vs ADF4154BRU)
- Compact surface-mount package width (vs ADF4154BRUZ)
- Production status and focused RF synthesizer role (vs ADF4155BRUZ)
設計ノート
Keep the reference input, phase-detector feedback path, and supply connections short. Place local decoupling directly across the relevant supply pins and maintain a continuous ground reference beneath and around the device. The reference and feedback nets carry high-frequency signals and should not run beneath switching-regulator power stages or parallel to digital clock lines. Use controlled-impedance routing where the reference frequency is high enough for transmission-line effects to matter.
Do not equate a higher maximum output-frequency rating with a drop-in substitute. Before replacing the ADF4153ABRUZ, compare pin functions, supply rails, reference-input limits, divider ranges, charge-pump behavior, register addresses, and initialization sequences in the exact alternative datasheet. A changed feedback-divider structure can invalidate the VCO frequency calculation and alter lock range, spurs, and loop stability even when the package and maximum frequency are similar.
Design and tune the external loop filter for the actual reference frequency, integer divider, fractional-N value, expected channel spacing, and VCO tuning range. Wider loop bandwidth can shorten acquisition time but may increase phase noise and reference multiplication effects; a narrow loop can reduce noise while making settling or temperature behavior less favorable. Confirm lock margin and spectral performance with the manufacturer’s evaluation tools before releasing the component values for production.
Separate the synthesizer reference and RF output regions from switching supplies, high-speed digital interfaces, and antenna coupling paths. Use a grounded guard or spacing strategy where practical, and terminate unused RF-related pins exactly as specified by the datasheet. Spectral validation should include the complete power supply and enclosure because conducted and radiated coupling can degrade phase noise or create spurs that are not visible in an isolated bench measurement.
コンプライアンス情報
The exact ordering code is identified as a production fractional-N frequency synthesizer in a 16-lead TSSOP. Environmental and material-compliance declarations must be taken from the current manufacturer product documentation or declaration for this specific suffix.