Analog Devices

ADF4153ABRUZ - 4 GHz Fractional-N RF Synthesizer | Analog Devices

MPN: ADF4153ABRUZ ✓ فعال
16-lead TSSOP, 0.173 inch (4.40 mm) width Package 4 GHz Speed
MOQ: 1 |

ADF4153ABRUZ جائزہ

The Analog Devices ADF4153ABRUZ is a fractional-N radio-frequency frequency synthesizer with a 4 GHz maximum synthesis frequency, a 10 MHz to 4 GHz input range, and a 16-lead TSSOP package measuring 0.173 inch, or 4.40 mm, in width. Designed for RF local-oscillator generation, it supports wireless transmitter and receiver signal chains that require programmable frequency synthesis with fractional division.

A fractional-N frequency synthesizer is a phase-locked-loop device that generates a stable output frequency by phase-locking a voltage-controlled oscillator to a reference source. In the wider semiconductor hierarchy, the ADF4153 belongs to the clock and timing IC category, then to phase-locked loops and frequency synthesizers. This architecture supports rational frequency ratios that allow a desired RF output to be produced with a reference frequency that may not divide it exactly.

The ADF4153ABRUZ combines a low-noise digital phase-frequency detector, precision frequency dividers, and fractional-N control logic for programmable RF synthesis. Its stated operating input span extends from 10 MHz to 4 GHz, while the maximum synthesis frequency is 4 GHz. The 16-lead TSSOP package supports compact surface-mount implementation, and the narrow 4.40 mm package width is useful in space-constrained radio modules.

The fractional-N architecture is particularly relevant to local oscillators in wireless receivers and transmitters. It allows the phase detector and loop filter to operate at a comparatively low reference-related frequency while maintaining a high synthesized output. Design evaluation must account for loop-filter bandwidth, phase noise, reference purity, integer and fractional divider settings, and the required output frequency. Those operating details should be configured with the manufacturer’s frequency-planning and register settings.

Typical uses include cellular and wireless infrastructure, radio transceivers, microwave downconverters, and upconverters. The device can also serve closed-loop RF systems where the local oscillator must track a programmable channel plan. Its frequency ceiling makes it applicable to 4 GHz-class signal paths when the selected divider, reference, and loop-filter settings support the required channel spacing.

Place decoupling capacitors close to the supply pins and route the reference and feedback paths as controlled-impedance traces with minimal parasitic coupling. Validate the phase-noise and spur performance across operating temperature because fractional-N operation, reference multiplication, and loop-filter settings influence the resulting spectrum.

This product page combines the manufacturer’s device description, exact-ordering information, drop-in candidates, and application-specific engineering guidance. It also distinguishes confirmed package and frequency facts from parameters that require validation in the ADF4153 datasheet and application-specific reference design.

کے لیے ڈراپ اِن متبادل ADF4153ABRUZ — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔

اس سیریز میں مختلف ورژن

اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں ADF4153ABRUZ (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Package, Charge Pump, Product Type, REACH Status, RoHS Status.

Analog Devices
Package: 16-pin TSSOP, 4.40 mm width
Charge Pump: Precision charge pump
Product Type: Fractional-N RF frequency synthesizer
موازنہ کریں ADF4153ABRUZ →
Analog Devices
Package: 16-lead TSSOP, 0.173 x 4.40 mm width
Charge Pump: Programmable current
موازنہ کریں ADF4153ABRUZ →

ADF4153BRUZ

✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ
Analog Devices
📦 TSSOP-16
Fractional-N RF frequency synthesizer · 4 GHz · 1 · Fractional-N phase-locked loop · 16-pin TSSOP, 4.40 mm width · Surface mount · -40 °C to +85 °C · External

قیمت کے لیے رابطہ کریں

ڈیٹا شیٹ دیکھیں →

ADF4154BRU

✅ ڈراپ-اِن
Analog Devices
📦 TSSOP-16
Fractional-N frequency synthesizer · 500 MHz to 4 GHz · 500 MHz · 4 GHz · 2.7 V to 3.3 V · 3.3 V · 4/5 and 8/9 dual modulus · Programmable current

قیمت کے لیے رابطہ کریں

ڈیٹا شیٹ دیکھیں →

ADF4154BRUZ

✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ
Analog Devices
📦 TSSOP-16
Fractional-N frequency synthesizer · 4 GHz · 2.7 V to 5.5 V · 20 mA · 3.3 V · 4/5 and 8/9 · Programmable dual-modulus · Programmable

قیمت کے لیے رابطہ کریں

ڈیٹا شیٹ دیکھیں →

ADF4155BRUZ

✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ
📦 TSSOP-16
Maximum synthesis frequency is approximately 4.4 GHz, about 10% above the ADF4153ABRUZ's 4 GHz ceiling

📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)

ADF4153ABRUZ تفصیلات

Product Type Fractional-N frequency synthesizer
Maximum Synthesis Frequency 4 GHz
Input Frequency Range 10 MHz to 4 GHz
Architecture Fractional-N phase-locked loop
پیکیج 16-lead TSSOP, 0.173 inch (4.40 mm) width
ماؤنٹنگ ٹائپ Surface mount
Orderable Package Suffix RUZ
Production Status Production
RoHS اسٹیٹس unknown
REACH Status unknown

ADF4153ABRUZ ruz پن کنفیگریشن گائیڈ

ADF4153ABRUZ (ruz پیکیج) کے لیے پن کنفیگریشن۔ پن نمبرنگ، فنکشنز اور کنکشن ڈایاگرامز مینوفیکچرر کے ڈیٹا شیٹ میں بیان کیے گئے ہیں۔ درست فٹ پرنٹ اور سولڈرنگ رہنما ہدایات کے لیے اسی سے رجوع کریں۔

ADF4153ABRUZ کے لیے ruz پیکیج پن آؤٹ ڈایاگرام

کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں ADF4153ABRUZ.

رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔

عام استعمالات

ADF4153ABRUZ کے لیے موزوں ہے 6 ایپلیکیشنs: Wireless Transmitter Local Oscillator, Wireless Receiver Downconverter, Microwave RF Signal Generator, Point-to-Point RF Data Link, RF Test and Measurement Module, Industrial Radio Equipment.

🌐

Wireless Transmitter Local Oscillator

The ADF4153ABRUZ fits a wireless transmitter local-oscillator block because it generates programmable fractional-N frequencies up to 4 GHz while accepting references within a 10 MHz to 4 GHz input range. Place it between the stable reference source and the RF upconverter so the channel frequency can be selected through the divider and fractional-N configuration. The 16-lead TSSOP footprint supports compact radio modules, although its 4.40 mm width still requires careful placement. Verify phase noise, reference multiplication, lock range, and adjacent-channel spurs against the transmitter mask before production.

📡

Wireless Receiver Downconverter

In a wireless receiver downconverter, the ADF4153ABRUZ can generate the local oscillator required by an RF mixing stage. Its 4 GHz maximum synthesis frequency covers 4 GHz-class downconversion requirements, while fractional-N division provides a practical way to derive many channel frequencies from a stable reference. The synthesizer must be planned around the selected feedback and reference dividers, and the loop filter must meet the receiver’s phase-noise requirements. A 16-lead TSSOP arrangement also keeps the device suitable for compact radio and gateway hardware.

🔧

Microwave RF Signal Generator

The ADF4153ABRUZ can serve as the tunable oscillator core of a compact microwave signal-generation system. Its fractional-N phase-locked-loop architecture supports programmable RF outputs up to 4 GHz from a 10 MHz to 4 GHz input range, allowing the output frequency to be changed through the synthesizer’s divider and fractional-N settings. The 16-lead TSSOP package facilitates dense instrument or test-module layouts. For useful results, the reference oscillator must have adequate frequency stability and phase noise, while the external loop filter and supply network require careful RF layout.

🌐

Point-to-Point RF Data Link

A point-to-point RF data link can use the ADF4153ABRUZ to synthesize the transmit or receive local oscillator required by a 4 GHz-class RF channel. Fractional-N operation allows the frequency plan to use a fixed reference while supporting multiple channel assignments, reducing the need for multiple separate oscillator packages. The design must ensure that the chosen divider and VCO frequency remain valid at both channel extremes and that the loop-filter bandwidth balances lock time against phase noise. The 16-lead TSSOP footprint is practical for compact outdoor and industrial radio units.

📺

RF Test and Measurement Module

The ADF4153ABRUZ is suitable for a compact RF test module that requires a programmable local source across part of the 4 GHz range. Its fractional-N architecture permits channel frequencies to be derived from a stable reference without changing the reference oscillator, while the 16-lead TSSOP package helps preserve instrument-panel space. For measurement accuracy, evaluate the synthesizer’s phase noise and spurious outputs over the required bandwidth, and isolate the reference from digital and switching circuitry. The loop filter and RF output network remain central to achieving predictable spectral performance.

🏭

Industrial Radio Equipment

Industrial radio equipment can use the ADF4153ABRUZ for programmable local-oscillator generation when a stable 4 GHz-class RF source is required. Its 10 MHz to 4 GHz input range supports several reference-distribution arrangements, while fractional-N synthesis allows channel selection from a common oscillator. The TSSOP-16 package is suitable for automated surface-mount assembly and compact control boards. Engineers should validate temperature drift, lock time, reference isolation, and spectral purity in the final enclosure because adjacent switching regulators and digital circuitry can degrade otherwise acceptable oscillator performance.

What is the ADF4153ABRUZ?
The ADF4153ABRUZ is a production fractional-N radio-frequency frequency synthesizer from Analog Devices with a maximum synthesis frequency of 4 GHz. It operates from a 10 MHz to 4 GHz input range and is packaged in a 16-lead TSSOP measuring 0.173 inch, or 4.40 mm, in width. According to the Analog Devices ADF4153 product page and datasheet, it is intended primarily for generating programmable local oscillators in wireless receivers and transmitters.
What are the key specifications of ADF4153ABRUZ that engineers should know?
The key confirmed specifications are a 4 GHz maximum synthesis frequency, a 10 MHz to 4 GHz input range, fractional-N phase-locked-loop operation, and a 16-lead TSSOP package with a 4.40 mm width. According to the Analog Devices ADF4153 product page, the device includes a low-noise digital phase-frequency detector and precision frequency-divider circuitry. Phase noise, spur levels, supply limits, and divider ranges must be selected from the manufacturer datasheet for the operating channel and reference frequency.
Where can I download the ADF4153ABRUZ datasheet PDF?
The official ADF4153ABRUZ documentation is reached through the Analog Devices ADF4153 product page at analog.com. The page provides the production fractional-N frequency synthesizer data sheet and related product resources. Use the pin-description table, recommended operating limits, register map, and application circuits in that document when assigning PCB tracks, selecting loop-filter components, and configuring the synthesizer. Search for the full ordering code ADF4153ABRUZ when confirming that the documentation applies to the exact suffix.
Where can I find the ADF4153ABRUZ pinout?
The ADF4153ABRUZ pinout is identified in the manufacturer’s ADF4153 datasheet rather than reproduced on this page. The device uses a 16-lead TSSOP package, so consult the pin-description table and package drawing before assigning power, ground, reference, feedback, and control connections. According to the Analog Devices product documentation, the package is 0.173 inch, or 4.40 mm, wide. Follow the pin table exactly and include all recommended supply decoupling in the board layout.
What is the maximum output frequency of ADF4153ABRUZ?
The maximum synthesis frequency of the ADF4153ABRUZ is 4 GHz, as identified by Analog Devices and the distributor product listing. The corresponding input range is 10 MHz to 4 GHz. The actual usable output also depends on the selected integer divider, feedback divider, reference frequency, charge-pump settings, and loop-filter configuration. Validate the divider combination and resulting VCO frequency in the manufacturer’s register and frequency-planning procedure before releasing the PCB.
Is ADF4153ABRUZ suitable for wireless receiver and transmitter local oscillators?
Yes, the ADF4153ABRUZ is designed for programmable RF local oscillators in wireless receivers and transmitters. Its fractional-N phase-locked-loop architecture supports frequency synthesis up to 4 GHz from an input reference spanning 10 MHz to 4 GHz. According to the Analog Devices ADF4153 product page, the device is intended for upconversion and downconversion sections of wireless radio systems. Final suitability depends on channel spacing, reference accuracy, phase-noise requirements, and acceptable adjacent-channel spurs.
What is the difference between ADF4153ABRUZ and ADF4154BRU?
ADF4153ABRUZ is the 4 GHz ADF4153 ordering code in a 16-lead TSSOP, while ADF4154BRU belongs to the closely related ADF4154 family. The manufacturer families differ in their frequency-divider and phase-detector implementation, so software settings and some performance characteristics are not interchangeable. According to the published ADF4153 and ADF4154 documentation, pin compatibility and programming equivalence should be confirmed for the exact footprint before treating ADF4154BRU as a drop-in replacement.
When should I choose ADF4153ABRUZ over an alternative fractional-N synthesizer?
Choose the ADF4153ABRUZ when the design specifically requires the Analog Devices ADF4153 function set, a maximum synthesis frequency of 4 GHz, and the 16-lead TSSOP footprint. It is a strong fit for wireless local oscillators where the manufacturer’s register map, divider structure, and reference configuration are already qualified. Select an alternative only after confirming pin compatibility, output-frequency range, reference input range, phase noise, spur performance, and software-register requirements for the complete synthesizer subsystem.
Is ADF4153ABRUZ suitable for a 4 GHz microwave downconverter?
The ADF4153ABRUZ is suitable for consideration in a 4 GHz microwave downconverter because its maximum synthesis frequency is 4 GHz and it is intended for local-oscillator generation in RF downconversion paths. The local oscillator must be planned so the feedback divider and VCO frequency remain valid at the lowest required output. According to the Analog Devices product page, a low-noise digital phase-frequency detector supports this use, but phase-noise and spur requirements must be checked against the complete receiver specifications.
What is the best drop-in replacement for ADF4153ABRUZ?
The closest same-brand drop-in candidate is the ADI ADF4154 family in a 16-lead TSSOP, but it should be treated as a qualified redesign candidate rather than an automatic substitute. According to the manufacturer family documentation, the ADF4154 uses a related but different architecture and programming model. Confirm every pin connection, required supply voltage, reference configuration, register map, and frequency range in the exact alternative datasheet before production. Request engineering review of the proposed replacement through the Request a Quote form on this page.
Can an ADF4154BRU replace an ADF4153ABRUZ?
The ADF4154BRU may be physically compatible with a 16-lead TSSOP layout, but that alone does not establish a functional drop-in replacement. Its maximum synthesis frequency is higher than the ADF4153ABRUZ’s 4 GHz ceiling, while divider behavior and register programming differ. According to the respective Analog Devices product documentation, verify pin assignment, supply rails, interface timing, reference behavior, and output-frequency calculations before substituting. A firmware and hardware review is recommended for an existing design.
What can replace ADF4153ABRUZ?
ADF4153ABRUZ can only be replaced confidently after confirming the same 16-lead TSSOP footprint, pin-to-pin function, supply requirements, reference range, output-frequency ceiling, phase noise, spur performance, and register behavior. The ADI ADF4154BRU is the closest family candidate represented in the cross-reference information, while no verified cross-brand drop-in is established. Use the Request a Quote form on this page to submit the target application, channel plan, reference frequency, and phase-noise requirements for a sourcing review.
Where can I buy ADF4153ABRUZ and what is its lead time?
ADF4153ABRUZ can be requested through the Request a Quote form on this page, where the exact suffix, package, order quantity, and delivery requirements can be reviewed before an order is placed. The device is identified as a production product by Analog Devices, with a 16-lead TSSOP package. Current stock, quoted price, minimum order quantity, and lead time are not fixed here because they can change by order configuration; submit the required quantity and target date through the quote form.
How is the ADF4153ABRUZ price determined?
The current ADF4153ABRUZ price is determined through the Request a Quote form on this page using the exact MPN, quantity, package, and required delivery terms. Analog Devices lists the ADF4153 family as a production fractional-N synthesizer, and the target ordering code is the 16-lead TSSOP version. This page does not publish a static price because quotation values may vary with quantity, supply, and order configuration. Request a formal quote for production planning.
Is ADF4153ABRUZ in stock?
ADF4153ABRUZ is listed by Analog Devices as a production device, and distributor records indicate that the exact ordering code is commercially handled. Inventory levels change continuously and may differ by package suffix, order quantity, and region. Use the Request a Quote form on this page to request current availability for the quantity, packaging format, and destination required by your build. Include the full ADF4153ABRUZ code when requesting a quote to avoid an order-code mismatch.
What design considerations matter for an ADF4153ABRUZ frequency synthesizer?
The most important design considerations are reference stability, integer and fractional divider selection, loop-filter bandwidth, charge-pump settings, phase noise, spurious performance, and PCB isolation. According to the Analog Devices ADF4153 datasheet, the device uses a low-noise digital phase-frequency detector and precision dividers for RF local-oscillator generation. Keep the reference and feedback routes short, decouple supply pins locally, and validate lock behavior and spectral performance across temperature before production release.

کے لیے انجینئرنگ ریفرنس ڈیٹا ADF4153ABRUZ — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔

انتخاب کی گائیڈ

Choose ADF4153ABRUZ when the design requires an Analog Devices fractional-N synthesizer with a confirmed 4 GHz maximum synthesis frequency, a 10 MHz to 4 GHz input range, and a 16-lead TSSOP footprint. It is particularly appropriate for wireless local oscillators where the ADF4153 register set, divider structure, and application support are already understood. ADF4153BRUZ is the closest same-family option for footprint continuity, but ordering-grade requirements should be confirmed. ADF4154BRU or ADF4154BRUZ may suit designs needing a higher synthesis ceiling, but their register maps and divider behavior require redesign and verification rather than a simple firmware substitution. ADF4155BRUZ is relevant when its family-specific characteristics match the receiver or transmitter requirements. For any alternative, verify the exact pinout, supply voltage, reference range, phase noise, spur performance, lock behavior, and register compatibility. No verified cross-brand drop-in replacement is established, so changing manufacturers should be treated as a new design qualification.

متبادلات کے ساتھ موازنہ

پیرامیٹر یہ پروڈکٹ ADF4153BRUZ ADF4154BRU ADF4154BRUZ ADF4155BRUZ
Package TSSOP-16, 4.40 mm width TSSOP-16 TSSOP-16 TSSOP-16 TSSOP-16
Brand Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices
Synthesis Architecture Fractional-N frequency synthesizer Fractional-N frequency synthesizer Fractional-N frequency synthesizer Fractional-N frequency synthesizer Fractional-N frequency synthesizer

اہم امتیازی خصوصیات

  • Directly matches the 4 GHz target frequency class (بمقابلہADF4153BRUZ)
  • Known Analog Devices fractional-N implementation (بمقابلہADF4154BRU)
  • Compact surface-mount package width (بمقابلہADF4154BRUZ)
  • Production status and focused RF synthesizer role (بمقابلہADF4155BRUZ)

ڈیزائن نوٹس

Keep the reference input, phase-detector feedback path, and supply connections short. Place local decoupling directly across the relevant supply pins and maintain a continuous ground reference beneath and around the device. The reference and feedback nets carry high-frequency signals and should not run beneath switching-regulator power stages or parallel to digital clock lines. Use controlled-impedance routing where the reference frequency is high enough for transmission-line effects to matter.

Do not equate a higher maximum output-frequency rating with a drop-in substitute. Before replacing the ADF4153ABRUZ, compare pin functions, supply rails, reference-input limits, divider ranges, charge-pump behavior, register addresses, and initialization sequences in the exact alternative datasheet. A changed feedback-divider structure can invalidate the VCO frequency calculation and alter lock range, spurs, and loop stability even when the package and maximum frequency are similar.

Design and tune the external loop filter for the actual reference frequency, integer divider, fractional-N value, expected channel spacing, and VCO tuning range. Wider loop bandwidth can shorten acquisition time but may increase phase noise and reference multiplication effects; a narrow loop can reduce noise while making settling or temperature behavior less favorable. Confirm lock margin and spectral performance with the manufacturer’s evaluation tools before releasing the component values for production.

Separate the synthesizer reference and RF output regions from switching supplies, high-speed digital interfaces, and antenna coupling paths. Use a grounded guard or spacing strategy where practical, and terminate unused RF-related pins exactly as specified by the datasheet. Spectral validation should include the complete power supply and enclosure because conducted and radiated coupling can degrade phase noise or create spurs that are not visible in an isolated bench measurement.

تعمیل کی معلومات

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
لیڈ فری
Unknown
ہیلوجن فری
Unknown
کنفلیکٹ منرلز
Unknown

The exact ordering code is identified as a production fractional-N frequency synthesizer in a 16-lead TSSOP. Environmental and material-compliance declarations must be taken from the current manufacturer product documentation or declaration for this specific suffix.

ڈیٹا کی تصدیق کی تاریخ: 2026-11-10 — ڈیٹا XAIPART کی کمپوننٹ انجینئرنگ ٹیم کے ذریعے تصدیق شدہ اور ترتیب شدہ

متعلقہ تلاشیں

ADF4153ABRUZ datasheet ADF4153ABRUZ pinout ADF4153ABRUZ datasheet pdf ADF4153ABRUZ equivalent ADF4153ABRUZ replacement ADF4153ABRUZ cross reference ADF4153ABRUZ price ADF4153ABRUZ stock Analog Devices ADF4153ABRUZ ADF4153ABRUZ TSSOP-16 footprint ADF4153ABRUZ 4 GHz synthesizer ADF4153ABRUZ wireless local oscillator

متعلقہ اجزاء اور اصطلاحات

Analog Devices ADF4153ABRUZ ADF4153BRUZ ADF4154BRU ADF4154BRUZ ADF4155BRUZ fractional-N frequency synthesizer frequency synthesizer phase-locked loop PLL phase-frequency detector radio-frequency synthesizer RF local oscillator wireless receiver wireless transmitter TSSOP-16 TSSOP family surface mount SMD 4 GHz 10 MHz low-noise digital phase-frequency detector phase noise spurious performance loop filter
فوری کوٹ RFQ
مکمل تفصیلات بھریں — ہماری سیلز ٹیم 24 گھنٹوں میں جواب دے گی
پارٹ نمبر مینوفیکچرر پیکج QTY ہدف قیمت کل رقم
✓
کوٹ جمع ہو گیا!

ہم 24 گھنٹوں کے اندر آپ کے ای میل کا جواب دیں گے

1
RFQ جمع ہو گیا
2
کوٹ موصول ہو گیا
3
آرڈر دے دیا گیا
4
ادائیگی
5
بھیج دیا گیا
6
ڈیلیور شدہ
RFQ تفصیلات دیکھیں