ADF4154BRUZ-RL7 - 4 GHz Fractional-N PLL | Analog Devices
部品番号: ADF4154BRUZ-RL7 ✓ 生産中ADF4154BRUZ-RL7 概要
A fractional-N frequency synthesizer is a phase-locked-loop device that generates an adjustable output frequency while permitting a non-integer division ratio. The ADF4154 combines a low-noise digital phase-frequency detector, precision charge pump, programmable reference divider, Sigma-Delta fractional interpolator, and integer-N counter. This architecture places it within the PLL, frequency synthesizer, clock-and-timing IC, and semiconductor hierarchies.
Key characteristics include a 4 GHz maximum synthesizer frequency, a three-wire serial programming interface, and operation from a 2.7 V to 3.3 V supply. The charge-pump supply can operate from 2.7 V to 5.5 V. These features support RF local-oscillator generation, wireless receiver and transmitter upconversion or downconversion, clock generation, and other precision frequency-control systems.
Internally, the programmable reference path and phase-frequency detector compare the divided feedback signal with the reference clock. The charge pump converts phase and frequency error into a control voltage for the external voltage-controlled oscillator and loop filter. A Sigma-Delta fractional interpolator permits programmable fractional-N division, while FastLock provides a mechanism for improving acquisition behavior in frequency-changing systems.
The ADF4154 is particularly suitable for RF local oscillators because it combines fractional frequency synthesis with a 4 GHz operating range. It can also generate a clean, programmable clock for instrumentation, communication equipment, and signal-processing systems when the external VCO, loop filter, and reference source are designed for the required frequency and phase-noise performance.
Designers should preserve the supply-voltage limits and provide appropriate bypass capacitance near the power pins. Loop-filter component values, VCO gain, reference quality, and the selected integer and fractional divider values must be tuned together because the PLL lock range and settling performance depend on the complete feedback loop rather than on the synthesizer IC alone.
This product page combines the device architecture, supply and frequency limits, package information, procurement guidance, and design considerations to support rapid initial part selection and PCB planning. The comparison and replacement guidance also distinguishes device-level differences from differences limited to ordering or packaging terminology.
ドロップイン代替品: ADF4154BRUZ-RL7 — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: ADF4154BRUZ-RL7 (同一形状・フットプリント) — 相違点: Charge Pump, Package.
ADF4154BRUZ-RL
✅ ドロップイン📋 参考代替品(カタログ未掲載)
ADF4154BRUZ
✅ ドロップイン価格はお問い合わせください
データシートを見る →ADF4154BRU
✅ ドロップイン価格はお問い合わせください
データシートを見る →ADF4153BRUZ-RL7
✅ ドロップイン価格はお問い合わせください
データシートを見る →ADF4153YRUZ-RL7
✅ ドロップイン📋 参考代替品(カタログ未掲載)
ADF4154BRUZ-RL7 仕様
| Product Type | Fractional-N frequency synthesizer |
| Maximum Synthesizer Frequency | 4 GHz |
| Supply Voltage Range | 2.7 V to 3.3 V |
| Charge Pump Supply Range | 2.7 V to 5.5 V |
| Programming Interface | 3-wire serial interface |
| Architecture | Fractional-N phase-locked loop |
| Fractional Divider | Sigma-Delta based fractional interpolator |
| パッケージ | 16-pin TSSOP, 4.40 mm width |
| 実装タイプ | Surface mount |
| 動作温度 | -40°C to +80°C for the B version |
| Distributor Operating Temperature Listing | -40°C to +85°C |
| RoHS ステータス | Compliant |
| Manufacturer Recommendation | Recommended for new designs |
| Reference Divider | Programmable |
| Phase-Frequency Detector | Low-noise digital PFD |
| Charge Pump | Precision charge pump |
| FastLock Feature | Supported |
ADF4154BRUZ-RL7 16-pin tssop, 4.40 mm width ピン配置ガイド
ADF4154BRUZ-RL7 (16-pin tssop, 4.40 mm width パッケージ) のピン配置。 ピン番号、機能、接続図はメーカーのデータシートで定義されています。正確なフットプリントとはんだ付けのガイドラインについては、データシートを参照してください。
詳細なピン配置データはありません: ADF4154BRUZ-RL7.
詳細は データシート をご参照ください。
主な用途
ADF4154BRUZ-RL7 の用途: 6 件s: Wireless Receiver Local Oscillator, Wireless Transmitter Frequency Conversion, RF Instrument Clock Generation, Precision Clock Reference, Frequency Hopping Control, Communications Test Equipment.
Wireless Receiver Local Oscillator
The ADF4154BRUZ-RL7 supports a 4 GHz maximum synthesizer frequency and programmable fractional division, making it suitable for generating a tunable local oscillator in wireless receivers. The synthesizer can drive an external VCO through its phase-frequency detector and precision charge pump while the Sigma-Delta interpolator realizes a fractional division ratio. A practical design requires a low-phase-noise reference, a correctly designed loop filter, and VCO gain matched to the target channel bandwidth. Because phase noise and lock performance depend on the external loop, the 4 GHz device rating alone does not determine receiver sensitivity or spur performance.
おすすめ
Wireless Transmitter Frequency Conversion
The ADF4154BRUZ-RL7 can generate a programmable RF reference for transmitter upconversion and downconversion stages. Its 4 GHz frequency capability and programmable fractional-N architecture allow channel spacing to be represented without relying exclusively on integer division. The device interfaces through a three-wire serial control path, simplifying connection to a transmitter control processor. The external VCO and loop filter remain critical: their tuning range, phase noise, tuning gain, and loop bandwidth must be selected to meet the transmitter mask and adjacent-channel requirements without allowing the PLL to unlock at operating temperature.
おすすめ
RF Instrument Clock Generation
A 4 GHz fractional-N synthesizer can provide a programmable clock or local-oscillator reference for RF test and measurement equipment. The ADF4154BRUZ-RL7 combines a programmable reference divider, low-noise digital phase-frequency detector, precision charge pump, and Sigma-Delta fractional interpolator within a 16-pin TSSOP package. This integration supports flexible frequency selection across an instrument while reducing the number of separate frequency-setting components. For laboratory instruments, the design should account for reference spurs, fractional-N noise shaping, loop-filter tolerance, and settling time so that frequency accuracy is not compromised by the supporting analog loop.
おすすめ
Precision Clock Reference
The ADF4154BRUZ-RL7 can synthesize a programmable clock from a stable reference when the design requires multiple related output frequencies from one source. Its programmable reference divider and fractional-N feedback architecture allow the output spacing to be adjusted digitally, while the three-wire interface simplifies configuration by a microcontroller or FPGA. For a precision clock, the reference oscillator should provide low phase noise and sufficient stability, and the loop filter should preserve the required phase margin across the operating frequency range. Verify output purity and settling behavior on the assembled board because reference spur coupling and component tolerances can dominate practical performance.
おすすめ
Frequency Hopping Control
The programmable fractional-N division and FastLock capability of the ADF4154BRUZ-RL7 make it useful in controlled frequency-hopping systems. The synthesizer can command successive channel frequencies through its serial interface, while FastLock assists rapid acquisition when the loop must move between separated frequencies. Effective implementation requires a VCO with adequate tuning range, a loop filter optimized for the worst-case settling interval, and a control sequence that avoids changing divider combinations that place excessive phase error on the charge pump. The 4 GHz ceiling defines the usable upper range but does not by itself establish hopping speed or spur performance.
おすすめ
Communications Test Equipment
The ADF4154BRUZ-RL7 is appropriate for communications test equipment requiring an adjustable RF local oscillator over a broad frequency range. A 4 GHz maximum synthesizer frequency covers common RF test points, while fractional-N operation provides fine channel-spacing control from a single reference. The 16-pin TSSOP package supports compact implementation on high-density measurement boards. For production test equipment, designers should evaluate settling accuracy, reference-to-output phase noise, and spurious-signal levels across temperature. Stable VCO tuning behavior and correctly calculated charge-pump current are as important as the synthesizer's headline frequency rating.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: ADF4154BRUZ-RL7 — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | ADF4154BRUZ-RL | ADF4154BRUZ | ADF4154BRU | ADF4153BRUZ-RL7 |
|---|---|---|---|---|---|
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Package | 16-TSSOP (4.40 mm width) | 16-TSSOP (4.40 mm width) | 16-TSSOP (4.40 mm width) | 16-TSSOP (4.40 mm width) | 16-TSSOP (4.40 mm width) |
| Product Type | Fractional-N frequency synthesizer | Fractional-N frequency synthesizer | Fractional-N frequency synthesizer | Fractional-N frequency synthesizer | Fractional-N frequency synthesizer |
| Maximum Frequency | 4 GHz | 4 GHz | 4 GHz | 4 GHz | 4 GHz |
主な差別化要因
- Direct ADF4154 family ordering flexibility (vs ADF4154BRUZ-RL)
- Compact 16-pin TSSOP implementation (vs ADF4153BRUZ-RL7)
- Flexible charge-pump supply range (vs ADF4154BRUZ-RL)
- Fractional-N control for fine frequency spacing (vs ADF4153BRUZ-RL7)
設計ノート
Place the ADF4154BRUZ-RL7 close to the reference, VCO, and loop-filter connections. Keep the serial programming traces away from the charge-pump output and sensitive reference node, and provide ground-return paths that do not share high-current VCO return paths with the synthesizer ground. Short, symmetric RF interconnects and a continuous ground plane help reduce coupling, phase noise degradation, and unintended feedback around the PLL loop.
Decouple each supply domain using the capacitance and placement specified by the Analog Devices data sheet. The main digital supply operates at 2.7 V to 3.3 V, while the charge-pump supply may extend to 5.5 V. Keep the charge-pump return current out of the digital and reference return paths. A quiet reference and low-impedance supply connections are particularly important because reference noise and supply coupling can appear directly as synthesizer phase noise.
Do not select divider ratios, charge-pump current, and loop-filter values independently. First identify the reference frequency and target output range, then calculate the integer and fractional division settings and design the VCO tuning range for the required lock margin. A synthesizer can meet its 4 GHz device limit yet fail to lock if the VCO range, loop gain, or filter component tolerances are unsuitable across temperature and supply variation.
Use a clean, low-phase-noise reference and account for reference-divider and fractional-N spur mechanisms when planning adjacent-channel requirements. Check output purity with the intended reference, filter, VCO, and digital settings rather than relying only on nominal frequency accuracy. For FastLock operation, validate acquisition and settling at the largest channel-to-channel jump because filter components and VCO gain determine how quickly the loop recovers.
コンプライアンス情報
A distributor product record identifies the exact MPN as RoHS compliant. No explicit REACH, halogen-free, conflict-minerals, or automotive-qualification statement was identified.