Analog Devices

ADF4213BCPZ-RL - 3 GHz PLL Synthesizer | Analog Devices

部品番号: ADF4213BCPZ-RL ✓ 生産中
2.7 V to 5.5 V Vdss Programmable Id 20-pin VQFN exposed-pad LFCSP Package 3 GHz Speed
MOQ: 1 |

ADF4213BCPZ-RL 概要

The Analog Devices ADF4213BCPZ-RL is a 3 GHz RF/IF frequency synthesizer with an integrated phase-locked loop, programmable dual-modulus prescaler, and a 3-wire serial interface, housed in a 20-pin VQFN exposed-pad package. It operates from a 2.7 V to 5.5 V power supply and supports an RF input range up to 3 GHz. Programmable RF and IF prescaler ratios of 8/9, 16/17, 32/33, and 64/65 support flexible channel planning.

A PLL frequency synthesizer is a clock-and-timing integrated circuit that locks an output frequency to a stable reference through a phase-locked loop. In the broader hierarchy, the ADF4213 belongs to frequency synthesizers, clock and timing ICs, and ultimately semiconductor-based timing and frequency-control devices. It is used when a system must generate a precise, programmable local oscillator for RF or IF signal chains.

Key features include programmable charge-pump current, a separate charge-pump supply that permits an extended tuning voltage in 3 V systems, analog and digital lock detection, Fastlock mode, and power-down operation. The supported RF/IF prescaler ratios give engineers several division choices for translating a reference frequency into the required local-oscillator output. A three-wire serial interface simplifies programming from a host controller.

The architecture combines a programmable frequency divider, phase detector, charge pump, and loop-filter support with the output synthesizer. Separate digital and analog lock indicators provide multiple ways to monitor loop status. Fastlock can shorten acquisition behavior in suitable loop designs, while the separate VP connection gives the charge-pump subsystem an independently adjustable supply rather than forcing it to share the main digital supply rail.

Typical uses include RF and IF local-oscillator generation in wireless receivers, microwave down-converters, test-and-measurement equipment, instrumentation, and communications modules. The maximum 3 GHz operating capability makes the device applicable where an integer-N or fractional-N architecture requires programmable frequency generation and serial control from a host processor.

PCB implementation requires careful treatment of the exposed thermal pad, supply decoupling, reference routing, and the charge-pump and loop-filter network. Keep the reference and feedback paths short, use an uninterrupted ground plane, and place the exposed-pad vias according to the manufacturer's land pattern. Verify lock behavior across the intended temperature and supply ranges before finalizing RF layout.

This product record combines the manufacturer's family-level electrical characteristics, package information, practical RF layout guidance, and same-footprint replacement options. It also highlights the engineering trade-offs among the closely related ADF4211 and ADF4212 frequency ranges, helping designers select the correct synthesizer without changing the PCB footprint.

ドロップイン代替品: ADF4213BCPZ-RL — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。

このシリーズのバリエーション

同一シリーズでドロップイン互換のモデル: ADF4213BCPZ-RL (同一形状・フットプリント) — 相違点: Package, Device Type, Charge Pump Current.

Analog Devices
Package: 20-pin LFCSP with exposed pad
Device Type: Dual RF/IF PLL frequency synthesizer
Charge Pump Current: Programmable for RF and IF
比較対象 ADF4213BCPZ-RL →
Analog Devices
Package: 20-pin VFQFN exposed-pad package
Device Type: Clock/Frequency Synthesizer (RF/IF)
比較対象 ADF4213BCPZ-RL →
Analog Devices
Package: 20-LFCSP-EP
Device Type: Clock generator and PLL frequency synthesizer
比較対象 ADF4213BCPZ-RL →

ADF4211BCPZ

✅ ドロップイン ⚠️ 仕様未検証
📦 20-pin VQFN exposed-pad LFCSP
Maximum frequency is 2.0 GHz versus 3.0 GHz, a 33% reduction; lower-frequency designs can reuse the family footprint

📋 参考代替品(カタログ未掲載)

ADF4212BCPZ

✅ ドロップイン ⚠️ 仕様未検証
📦 20-pin VQFN exposed-pad LFCSP
Maximum frequency is 2.7 GHz versus 3.0 GHz, a 10% reduction; retains the family prescaler and supply architecture

📋 参考代替品(カタログ未掲載)

ADF4213BCPZ-RL7

✅ ドロップイン
Analog Devices
📦 20-pin VQFN exposed-pad LFCSP
Clock generator and PLL frequency synthesizer · 0 MHz to 3 GHz · 3 GHz · CMOS · Clock · Yes · 3:1 · 3 V

価格はお問い合わせください

データシートを見る →

ADF4213BCP-REEL

✅ ドロップイン
📦 20-pin VQFN exposed-pad LFCSP
Same 3 GHz characteristics and terminal arrangement with a reel-oriented ordering code; no quantified functional difference

📋 参考代替品(カタログ未掲載)

ADF4213BCP

✅ ドロップイン
Analog Devices
📦 20-pin VQFN exposed-pad LFCSP
Dual RF/IF PLL frequency synthesizer · 3 GHz · 550 MHz/1.2 GHz · 550 MHz/2.0 GHz · 1.0 GHz/2.7 GHz · 1.0 GHz/3 GHz · 5.5 V · 3 V systems

価格はお問い合わせください

データシートを見る →

ADF4213BCPZ-RL 仕様

Product Type RF/IF PLL frequency synthesizer
Maximum Synthesizer Frequency 3 GHz
Power Supply Voltage 2.7 V to 5.5 V
Separate Charge Pump Supply Supported
RF Prescaler Ratios 8/9, 16/17, 32/33, 64/65
IF Prescaler Ratios 8/9, 16/17, 32/33, 64/65
Serial Interface 3-wire
Lock Detection Analog and digital
Fastlock Mode Supported
Power-Down Mode Supported
Charge Pump Current Programmable
Number of Synthesizer Circuits 1
Input Logic Type CMOS
パッケージ 20-pin VQFN exposed-pad LFCSP
ピン数 20 pins
実装タイプ Surface mount
Shipping Format Tape and reel

ADF4213BCPZ-RL 20-pin vqfn exposed-pad lfcsp ピン配置ガイド

ADF4213BCPZ-RL (20-pin vqfn exposed-pad lfcsp パッケージ) のピン配置。 ピン番号、機能、接続図はメーカーのデータシートで定義されています。正確なフットプリントとはんだ付けのガイドラインについては、データシートを参照してください。

ADF4213BCPZ-RL の 20-pin vqfn exposed-pad lfcsp パッケージピン配置図

詳細なピン配置データはありません: ADF4213BCPZ-RL.

詳細は データシート をご参照ください。

主な用途

ADF4213BCPZ-RL の用途: 6 件s: RF Receiver Local Oscillator, Microwave Down-Converter, Communications Test Equipment, Frequency Calibration System, Industrial RF Sensor Interface, Wireless Communication Module.

🌐

RF Receiver Local Oscillator

The ADF4213BCPZ-RL fits an RF receiver local-oscillator block that must support programmable frequencies as high as 3 GHz. Its RF prescaler choices of 8/9, 16/17, 32/33, and 64/65 allow the designer to select an appropriate division ratio for the PLL feedback path, while the 3-wire interface simplifies register programming from a transceiver or embedded controller. Analog and digital lock detection provide useful acquisition-status signals for the host system. The design should keep the reference and feedback paths short, account for the exposed thermal pad in the 20-pin VQFN land pattern, and validate lock performance across the required supply and temperature conditions.

📡

Microwave Down-Converter

In a microwave down-converter, the ADF4213BCPZ-RL can generate the programmable local oscillator used to translate a received RF channel toward a lower IF frequency. Its maximum RF range of 3 GHz and selectable dual-modulus prescalers provide flexibility when the IF ratio and reference frequency are constrained by system architecture. The separate charge-pump supply is useful in 3 V designs because it allows an extended tuning voltage, while Fastlock supports acquisition-oriented loop designs. Designers should evaluate phase noise, reference spur contribution, loop-filter values, and lock margin before committing to the channel plan.

🖥️

Communications Test Equipment

The ADF4213BCPZ-RL is suitable for programmable signal-source and test-equipment subsystems requiring a local oscillator between 1.0 GHz and 3 GHz. A host processor can configure the synthesizer through its 3-wire interface, while the available lock indicators support automated acquisition checks and calibration sequencing. The family’s programmable charge-pump current allows the loop design to be tuned for different reference and division ratios. For laboratory instruments, pay particular attention to reference purity, loop bandwidth, phase noise, and isolation because these determine the usable close-in and far-out signal quality.

📺

Frequency Calibration System

A compact calibration or frequency-generation module can use the ADF4213BCPZ-RL to produce a programmable RF reference for instrument calibration. The device’s 3 GHz ceiling covers higher-frequency calibration points, while its dual-modulus RF and IF divider choices make it easier to align the output frequency with a given reference oscillator. Serial programming permits automated sweep points, and lock detection can gate measurement validity. The board implementation should provide local reference filtering, a carefully designed charge-pump and loop-filter network, solid ground-plane continuity, and sufficient exposed-pad thermal construction to prevent frequency drift from self-heating.

🏭

Industrial RF Sensor Interface

The ADF4213BCPZ-RL can provide a programmable oscillator in industrial RF sensing equipment that requires stable excitation or conversion within the 1.0 GHz to 3 GHz range. Its serial control interface allows a microcontroller or embedded controller to change channels without replacing hardware, and lock indicators provide a practical mechanism for validating startup before measurements begin. The 2.7 V to 5.5 V supply range supports mixed-signal industrial boards. Engineers should use a low-noise reference, preserve isolation between the reference and RF paths, and account for temperature-dependent drift and channel-dependent phase noise in the sensor calibration process.

📶

Wireless Communication Module

The ADF4213BCPZ-RL fits wireless communication modules that need a programmable RF or IF oscillator for channel selection, frequency conversion, or test loops. Supporting up to 3 GHz, the part addresses radio designs requiring more tuning range than the 2.0 GHz ADF4211 and 2.7 GHz ADF4212 limits. Multiple prescaler options let the designer optimize the integer-N feedback ratio for a selected reference, while Fastlock and dual lock detection can support system acquisition sequencing. The PCB implementation should combine a continuous ground plane, a thermal-via field under the exposed pad, short RF feedback traces, and a charge-pump filter placed close to the device.

おすすめ製品の概要

ADF4213BCPZ-RL7 Analog Devices 使用用途: RF Receiver Local Oscillator, Communications Test Equipment, Frequency Calibration System, Wireless Communication Module ADF4212BCPZ Lower-frequency family option for RF designs limited to 2.7 GHz 使用用途: RF Receiver Local Oscillator, Microwave Down-Converter, Frequency Calibration System, Industrial RF Sensor Interface ADF4211BCPZ Lower-frequency family option for IF and RF planning 使用用途: Microwave Down-Converter, Industrial RF Sensor Interface ADF4213BCP-REEL Reel-configured family alternative 使用用途: Communications Test Equipment ADF4213BCP Analog Devices 使用用途: Wireless Communication Module
What is the ADF4213BCPZ-RL?
The ADF4213BCPZ-RL is a 3 GHz RF/IF phase-locked-loop frequency synthesizer from Analog Devices. It combines programmable RF and IF dual-modulus dividers, a programmable charge pump, analog and digital lock detection, Fastlock mode, power-down operation, and a 3-wire serial interface in a 20-pin VQFN exposed-pad package. According to the Analog Devices ADF4213 product page, its main power supply operates from 2.7 V to 5.5 V, and its separate VP supply permits an extended tuning voltage in 3 V systems.
What is the maximum operating frequency of ADF4213BCPZ-RL?
The ADF4213BCPZ-RL supports a maximum RF synthesizer frequency of 3 GHz. The same Analog Devices family also provides related parts covering lower ranges: ADF4210 reaches 1.2 GHz, ADF4211 reaches 2.0 GHz, and ADF4212 reaches 2.7 GHz. This makes ADF4213 the highest-frequency member of the displayed family. The manufacturer's product page identifies the ADF4213 RF/IF operating range as 1.0 GHz to 3 GHz.
Which supply voltage does ADF4213BCPZ-RL require?
The ADF4213BCPZ-RL uses a 2.7 V to 5.5 V main power supply and can also use a separate charge-pump supply identified as VP. The Analog Devices product page states that this separate supply allows an extended tuning voltage in 3 V systems. This separation is important in RF designs where the main digital supply and the charge-pump voltage require different levels or filtering arrangements.
Where can I download the ADF4213BCPZ-RL datasheet PDF?
The official ADF4213 product page at Analog Devices is the starting point for the ADF4213BCPZ-RL datasheet and supporting documentation. Use the datasheet, pin-description table, and land-pattern information for final PCB assignments. The product page also links the ADF4213 family information, including the 3 GHz maximum frequency, 2.7 V to 5.5 V supply range, programmable prescalers, lock detection, Fastlock mode, and power-down operation.
Where can I find the ADF4213BCPZ-RL pinout?
Use the pin-description table and package drawing in the Analog Devices ADF4213 datasheet for the authoritative ADF4213BCPZ-RL pinout. The device is specified in a 20-pin VQFN exposed-pad package, also described in listings as a 20-pin LFCSP with exposed pad. Confirm every signal, supply, ground, and exposed-pad connection against the selected ordering code before laying out or modifying a PCB.
What prescaler ratios are available in ADF4213BCPZ-RL?
The ADF4213BCPZ-RL supports programmable RF and IF dual-modulus prescaler ratios of 8/9, 16/17, 32/33, and 64/65. These four dual-modulus choices give the designer several input-frequency division options for the PLL feedback path. According to the Analog Devices product page, the ratios are independently presented for RF and IF operation, supporting flexible frequency planning across receiver and local-oscillator architectures.
ADF4213BCPZ-RL vs ADF4212BCPZ — which should be selected?
Choose ADF4213BCPZ-RL when the design requires RF frequencies above the ADF4212 family's 2.7 GHz maximum and up to 3 GHz. Choose ADF4212BCPZ when 2.7 GHz is sufficient and lower maximum frequency provides the appropriate design margin. The Analog Devices family listing identifies ADF4212 as a 1.0 GHz/2.7 GHz device and ADF4213 as a 1.0 GHz/3 GHz device, so the selection should follow the highest required local-oscillator frequency.
ADF4213BCPZ-RL vs ADF4211BCPZ — which is better for a 2 GHz RF design?
The ADF4211BCPZ is the more natural choice for a design whose maximum RF requirement is 2.0 GHz, while ADF4213BCPZ-RL provides headroom up to 3 GHz. According to the Analog Devices family description, ADF4211 covers 550 MHz/2.0 GHz and ADF4213 covers 1.0 GHz/3 GHz. If the 2 GHz requirement is fixed and firm, the lower-range part can simplify validation; if future bands or margin require more frequency, ADF4213 remains the safer functional choice.
When should I choose ADF4213BCPZ-RL over a lower-frequency family member?
Choose ADF4213BCPZ-RL when the RF signal path can reach 3 GHz, when wider tuning coverage is useful, or when a design may later add higher-frequency channels. Choose ADF4211BCPZ for requirements limited to 2.0 GHz and ADF4212BCPZ for requirements limited to 2.7 GHz. The Analog Devices family comparison shows the respective maxima as 2.0 GHz, 2.7 GHz, and 3.0 GHz, making frequency headroom the principal selection criterion.
Is ADF4213BCPZ-RL suitable for RF receiver local-oscillator generation?
The ADF4213BCPZ-RL is suitable for programmable RF local-oscillator generation in receiver and down-converter designs operating within its specified range. Its RF input range extends to 3 GHz, and selectable 8/9 through 64/65 prescaler ratios provide flexibility in translating a reference into the required output. The 3-wire interface also allows a host controller to program the synthesizer, while analog and digital lock indicators support system-level acquisition monitoring.
What is the best drop-in replacement for ADF4213BCPZ-RL?
ADF4213BCPZ-RL7 is the closest identified drop-in alternative because it is the same Analog Devices device with a different order-code suffix and retains the 20-pin exposed-pad footprint and 3 GHz functional characteristics. ADF4213BCP-REEL and ADF4213BCP are also same-footprint ordering options. Before replacement, confirm the exact suffix, temperature range, packing format, exposed-pad requirements, and ordering configuration in the Analog Devices product documentation.
Can ADF4213BCP-REEL replace ADF4213BCPZ-RL without PCB changes?
Yes, ADF4213BCP-REEL is identified as a pin- and package-compatible replacement for ADF4213BCPZ-RL. The comparison identifies matching 3 GHz clock or frequency-synthesizer characteristics and a 20-pin LFCSP with exposed pad, so the circuit does not require modification. Verify the selected temperature grade, reel configuration, pin names, exposed-pad layout, and production ordering requirements before approving the substitution.
What is the best Analog Devices equivalent for ADF4213BCPZ-RL?
ADF4213BCPZ-RL7 is the closest Analog Devices equivalent for ADF4213BCPZ-RL because it represents the same 3 GHz synthesizer family in the same 20-pin exposed-pad package. Same-family order-code alternatives ADF4213BCP-REEL and ADF4213BCP also preserve the footprint. No verified cross-manufacturer drop-in equivalent is identified for this device, so an engineer should not assume that a competitor with a similar frequency range shares the same pinout.
Where can I buy ADF4213BCPZ-RL and check its current price?
Use the Request a Quote form on this page to request the current ADF4213BCPZ-RL price, stock position, lead time, and order quantity. The form lets the purchasing request be matched to the exact ADF4213BCPZ-RL ordering code and exposed-pad package. Because RF synthesizer availability can vary by lot, temperature grade, and reel format, confirm the suffix and requested quantity before placing a production order.
What is the lead time for ADF4213BCPZ-RL?
The current lead time for ADF4213BCPZ-RL should be requested through the Request a Quote form on this page. Include the required quantity, reel format, target delivery date, and any production forecast. The device is offered in a tape-and-reel ordering configuration with a 20-pin exposed-pad package, so lead-time planning should account for the exact suffix and the assembly or test schedule required for the intended operating grade.
What are the key specifications of ADF4213BCPZ-RL that engineers should know?
The ADF4213BCPZ-RL is a 3 GHz RF/IF PLL synthesizer with a 2.7 V to 5.5 V supply, programmable 8/9, 16/17, 32/33, and 64/65 RF and IF prescalers, and a 3-wire serial interface. According to the Analog Devices product page, it also provides a separate charge-pump supply, analog and digital lock detection, Fastlock mode, and power-down operation. Its 20-pin VQFN exposed-pad package is important for pin assignment, thermal-pad construction, and replacement compatibility.

エンジニアリング参考データ: ADF4213BCPZ-RL — 比較、設計ガイダンス、コンプライアンス情報。

選定ガイド

Choose ADF4213BCPZ-RL when the design requires an RF synthesizer operating as high as 3 GHz or may need additional frequency range during future channel expansion. It is the appropriate member when 1.0 GHz to 3.0 GHz coverage, programmable RF and IF prescalers, a separate charge-pump supply, Fastlock, and dual lock detection are important. Choose ADF4212BCPZ when the maximum requirement is firmly limited to 2.7 GHz; it preserves the family architecture while reducing the tuning ceiling. Choose ADF4211BCPZ for applications limited to 2.0 GHz, including its lower 550 MHz minimum listed in the family comparison. ADF4213BCPZ-RL7, ADF4213BCP-REEL, and ADF4213BCP are appropriate when procurement, packing, or order-code differences make one preferable. Verify the exact suffix, thermal grade, reel quantity, pin table, and exposed-pad land pattern before approval.

代替品との比較

パラメータ この製品 ADF4211BCPZ ADF4212BCPZ ADF4213BCPZ-RL7 ADF4213BCP-REEL
Brand Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices
Package 20-pin VQFN exposed-pad LFCSP 20-pin VQFN exposed-pad LFCSP 20-pin VQFN exposed-pad LFCSP 20-pin VQFN exposed-pad LFCSP 20-pin VQFN exposed-pad LFCSP
Maximum Frequency 3 GHz 2 GHz 2.7 GHz 3 GHz 3 GHz
Minimum RF Frequency 1 GHz 550 MHz 1 GHz 1 GHz 1 GHz
Power Supply Voltage 2.7 V to 5.5 V 2.7 V to 5.5 V 2.7 V to 5.5 V 2.7 V to 5.5 V 2.7 V to 5.5 V
RF Prescaler Ratios 8/9, 16/17, 32/33, 64/65 8/9, 16/17, 32/33, 64/65 8/9, 16/17, 32/33, 64/65 8/9, 16/17, 32/33, 64/65 8/9, 16/17, 32/33, 64/65
IF Prescaler Ratios 8/9, 16/17, 32/33, 64/65 8/9, 16/17, 32/33, 64/65 8/9, 16/17, 32/33, 64/65 8/9, 16/17, 32/33, 64/65 8/9, 16/17, 32/33, 64/65
Serial Interface 3-wire 3-wire 3-wire 3-wire 3-wire
Separate Charge Pump Supply Supported Supported Supported Supported Supported
Lock Detection Analog and digital Analog and digital Analog and digital Analog and digital Analog and digital
Fastlock Mode Supported Supported Supported Supported Supported

主な差別化要因

  • Highest-frequency option in the displayed ADF421x family (vs ADF4212BCPZ)
  • Broader RF tuning range than the 2 GHz family member (vs ADF4211BCPZ)
  • Identical core synthesizer characteristics with an alternate order code (vs ADF4213BCPZ-RL7)
  • Separate charge-pump supply supports extended tuning in 3 V systems (vs ADF4211BCPZ)

設計ノート

Treat the reference, RF input, and feedback paths as controlled-impedance RF routes rather than general-purpose digital traces. Keep them short, avoid crossing ground-plane splits, and place the loop-filter and charge-pump components close to their associated pins. Maintain continuous ground-plane return beneath the routes, and isolate the reference input from the RF and charge-pump sections to reduce coupling and unwanted modulation.

Construct the 20-pin exposed-pad land pattern with a thermal-via field or equivalent copper structure that follows the manufacturer's recommended footprint. Keep the exposed pad connected to the ground plane, remove excess copper on lower layers only where the land pattern permits it, and verify that the board can dissipate the device's local heating without changing oscillator accuracy. Thermal gradients can appear as drift in the synthesized output even when the digital lock indicator remains active.

Decouple the main supply close to the relevant package pins and provide a separate, well-filtered path for the charge-pump supply. Because the VP connection permits an extended tuning voltage in 3 V systems, verify its permitted voltage against the selected loop-filter and charge-pump settings before energizing the circuit. Check startup sequencing, supply ripple, and noise coupling between the main rail and VP rail with an oscilloscope.

Do not select a family member solely by package size. ADF4211 reaches 2.0 GHz, ADF4212 reaches 2.7 GHz, and ADF4213 reaches 3.0 GHz; choosing a lower-range member for a 3 GHz requirement can leave insufficient tuning margin. Also verify the exact ordering suffix, temperature grade, reel format, and exposed-pad construction before releasing a replacement for production.

Validate the complete PLL rather than relying only on the lock indicator. Measure phase noise, reference spurs, settling time, and lock repeatability across the intended frequency range and temperature conditions. A lock status confirms that the loop has acquired, but it does not by itself guarantee acceptable phase noise or spur performance for the intended receiver or measurement channel.

コンプライアンス情報

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
鉛フリー
Unknown
ハロゲンフリー
Unknown
紛争鉱物
Unknown

The manufacturer product page identifies the ADF4213 family, but no explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statement was captured for this ordering code.

データ検証日: 2026-11-15 — データはXAIPARTの部品エンジニアリングチームによって検証・管理されています

関連検索

ADF4213BCPZ-RL datasheet ADF4213BCPZ-RL pinout ADF4213BCPZ-RL datasheet pdf ADF4213BCPZ-RL 3 GHz synthesizer ADF4213BCPZ-RL 20 pin VQFN ADF4213BCPZ-RL drop-in replacement ADF4213BCPZ-RL equivalent ADF4213BCPZ-RL vs ADF4212BCPZ ADF4213BCPZ-RL RF local oscillator ADF4213BCPZ-RL price ADF4213BCPZ-RL stock Analog Devices ADF4213BCPZ-RL

関連部品&用語

Analog Devices ADF4213BCPZ-RL ADF4213 ADF4211BCPZ ADF4212BCPZ ADF4213BCPZ-RL7 ADF4213BCP-REEL ADF4213BCP PLL phase-locked loop frequency synthesizer clock generator clock and timing IC semiconductor RF synthesizer IF synthesizer programmable dual-modulus prescaler charge pump programmable charge-pump current Fastlock mode analog lock detection digital lock detection 3-wire serial interface VQFN-20 LFCSP exposed pad surface mount
クイック見積RFQ
詳細をすべてご記入ください — 営業チームが24時間以内にご返信いたします
部品番号 メーカー パッケージ QTY 目標価格 小計
✓
見積を送信しました!

24時間以内にメールでご返信いたします

1
RFQ送信済み
2
見積受領
3
注文済み
4
お支払い
5
発送済み
6
配達済み
RFQの詳細を表示