ADM207EARZ - 5V 230kbps 5/3 RS-232 Transceiver | Analog Devices
部品番号: ADM207EARZ ✓ 生産中ADM207EARZ 概要
An RS-232 transceiver is an interface IC that translates digital logic levels into RS-232 line levels and converts received line-level signals back into logic-level outputs. The ADM207E family belongs to the RS-232 interface transceiver hierarchy, which connects TTL or CMOS-compatible equipment to the voltage levels, impedance, and signaling characteristics of EIA-232E and CCITT V.28 links.
The principal features of the ADM207EARZ include five driver channels, three receiver channels, operation from a single 5V supply, and support for data rates up to 230 kbps. According to the Analog Devices ADM207E product page, the devices fully conform to the EIA-232E and CCITT V.28 specifications. Some members of the family also provide shutdown or enable controls, although individual control availability must be confirmed for the selected ordering code.
The multi-channel architecture allows one package to serve several point-to-point or multidrop RS-232 connections. Five drivers support outbound data or control signaling, while three receivers support inbound data and status signals. This channel balance is useful in equipment that must aggregate several serial links without requiring one separate transceiver package for every direction.
Typical uses include industrial serial controllers, test and measurement instruments, point-of-sale equipment, data acquisition systems, and external communication ports. The 24-pin SOIC package is readily handled by conventional surface-mount assembly and allows a compact interface section on a larger mixed-signal or control board.
PCB design should preserve the RS-232 interface as a distinct high-voltage, high-current domain rather than routing transceiver outputs through sensitive analog signals. Place the device close to the DB connector, maintain the required separation from unrelated circuitry, and follow the manufacturer pin and layout guidance when assigning protection components.
This page combines the ADM207E family specifications, ordering-code information, interface-family alternatives, and practical design considerations to support component selection, footprint review, and PCB implementation. The exact complete pin assignment and application circuit details should be checked in the manufacturer datasheet before schematic release.
ドロップイン代替品: ADM207EARZ — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: ADM207EARZ (同一形状・フットプリント) — 相違点: Driver Count, Interface Standard, Receiver Count, Maximum Data Rate, Package.
ADM207EAR
✅ ドロップイン価格はお問い合わせください
データシートを見る →ADM206EARZ
✅ ドロップイン📋 参考代替品(カタログ未掲載)
ADM207EAKZ
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品(カタログ未掲載)
ADM207EARSZ
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品(カタログ未掲載)
ADM207EARZ 仕様
| Product Type | RS-232 transceiver |
| Driver Count | 5 drivers |
| Receiver Count | 3 receivers |
| 電源電圧 | 5 V |
| Supply Voltage Range | 4.5 V to 5.5 V |
| Maximum Data Rate | 230 kbps |
| Interface Standard | EIA-232E |
| Interface Standard | CCITT V.28 |
| 動作温度範囲 | -40 °C to +85 °C |
| パッケージ | 24-pin SOIC |
| 実装タイプ | Surface mount |
| ピン数 | 24 pins |
| RoHS ステータス | RoHS-compliant |
| Lead-Free Status | Lead-free |
ADM207EARZ 24-pin soic ピン配置ガイド
ADM207EARZ (24-pin soic パッケージ) のピン配置。 ピン番号、機能、接続図はメーカーのデータシートで定義されています。正確なフットプリントとはんだ付けのガイドラインについては、データシートを参照してください。
詳細なピン配置データはありません: ADM207EARZ.
詳細は データシート をご参照ください。
主な用途
ADM207EARZ の用途: 6 件s: Industrial Serial Data Acquisition, Test and Measurement Instrument Interface, Point-of-Sale Terminal Connectivity, Industrial Control and Monitoring, External Service and Configuration Port, Communication Adapter and Protocol Bridge.
Industrial Serial Data Acquisition
The ADM207EARZ fits an industrial data-acquisition controller that must translate several logic-level UART signals into RS-232 and receive up to three remote signals. Its five-driver and three-receiver configuration reduces the number of interface packages compared with several one-channel transceivers, while the 4.5V-to-5.5V supply range and -40 °C-to-+85 °C operating range support conventional industrial control boards. Each outbound line still needs correct RS-232 level translation, and the 230 kbps maximum should be checked against the instrument protocol, cable length, and grounding arrangement.
おすすめ
Test and Measurement Instrument Interface
The ADM207EARZ can provide multiple RS-232 links in a bench instrument, allowing commands to be transmitted and measurements, status, or alerts to be received over separate lines. The documented 5/3 channel balance is useful when the instrument has several peripheral connections but does not require a fully symmetric number of transmitters and receivers. Its 230 kbps capability is suitable for many control and status protocols, although slower legacy instruments may require specific timing compatibility that should be tested with the connected equipment.
おすすめ
Point-of-Sale Terminal Connectivity
A point-of-sale terminal can use the ADM207EARZ to consolidate several serial peripherals, including a receipt printer, customer display, scanner, or status device. The five transmitters provide sufficient outbound channels for multiple command links, while three receivers support responses from selected devices. The 5V supply and 24-pin SOIC footprint simplify integration into control hardware. Designers should still consider whether legacy point-of-sale equipment uses hardware handshaking and should validate RS-232 polarity, connector assignment, and ground continuity for every peripheral.
おすすめ
Industrial Control and Monitoring
The ADM207EARZ is appropriate for a controller that must exchange commands, alarms, and diagnostic states with remote RS-232 equipment. Its five drivers and three receivers provide a practical channel allocation for one-to-many monitoring functions, and its -40 °C-to-+85 °C range covers common enclosure conditions. To preserve signal integrity, route the interface away from switching nodes, use a solid ground reference, and place connector protection close to the entry point. Verify the remote device’s driver and receiver counts because RS-232 is not a multi-drop bus.
おすすめ
External Service and Configuration Port
The ADM207EARZ can support a configuration and service interface containing one primary serial link plus additional control or diagnostic lines. The five-driver configuration permits auxiliary outputs for remote indicators or equipment control, while three receivers can monitor acknowledgments, interlocks, or status signals. Operating at up to 230 kbps allows compatibility with many legacy service protocols. The complete design should establish unambiguous driver-to-receiver connections, account for unused inputs, and avoid presenting multiple opposing RS-232 drivers onto the same node.
おすすめ
Communication Adapter and Protocol Bridge
The ADM207EARZ can form the host-side interface section of a communication adapter that bridges a microcontroller or programmable logic device to RS-232 equipment. Multiple channels allow command traffic to be separated from status and control traffic, reducing the need for additional transceiver packages. The 5V analog interface section can operate alongside digital control circuitry, but the RS-232 domain should be isolated physically from sensitive clocks and analog inputs. Confirm the adapter’s logical UART speed and handshake requirements against the 230 kbps device limit.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: ADM207EARZ — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | ADM207EAR | ADM206EARZ | ADM207EAKZ | ADM207EARSZ |
|---|---|---|---|---|---|
| Package | 24-pin SOIC | 24-pin SOIC | 24-pin SOIC | 24-pin SOIC | 24-pin SOIC |
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Product Type | RS-232 transceiver | RS-232 transceiver | RS-232 transceiver | RS-232 transceiver | RS-232 transceiver |
| Driver Count | 5 drivers | 5 drivers | 5 drivers | 5 drivers | 5 drivers |
| Receiver Count | 3 receivers | 3 receivers | 3 receivers | 3 receivers | 3 receivers |
| Supply Voltage | 5 V | 5 V | 5 V | 5 V | 5 V |
| Maximum Data Rate | 230 kbps | 230 kbps | 230 kbps | 230 kbps | 230 kbps |
| Interface Compliance | EIA-232E and CCITT V.28 | EIA-232E and CCITT V.28 | EIA-232E and CCITT V.28 | EIA-232E and CCITT V.28 | EIA-232E and CCITT V.28 |
主な差別化要因
- Five transmitters and three receivers in one package (vs MAX3221IPWR)
- Higher channel count for multi-signal equipment (vs MAX3221CDBR)
- Documented high-speed family operation (vs MC1489AD)
設計ノート
Keep the ADM207EARZ and its protection network close to the RS-232 connector. Route driver outputs and receiver inputs away from crystals, switching regulators, magnetic components, and sensitive analog inputs. Maintain a continuous ground reference between the interface board and connected equipment; otherwise, the receiver may interpret common-mode noise as an invalid signal even when the data waveform is correct at the transmitter.
Do not connect two active RS-232 drivers to the same node, and do not treat RS-232 as a multi-drop bus. Each point-to-point path requires one driver and one receiver with the correct signal polarity. Before assigning unused pins, consult the complete manufacturer pin-description table and explicitly terminate unused receiver inputs so that floating inputs cannot create unpredictable states.
Place connector-side surge and ESD protection close to the entry point while keeping those protection components out of sensitive logic paths. The RS-232 driver outputs are high-voltage, high-current signaling nodes; excessive loop area can increase radiated emissions. Use a compact output route, an appropriate ground reference, and the manufacturer’s recommended protection topology. Validate emissions and immunity on the finished assembly rather than relying only on schematic review.
コンプライアンス情報
A component listing identifies the ADM207EARZ as RoHS-compliant and lead-free. No automotive qualification applies to the standard ADM207EARZ ordering code; an automotive family ordering option should be reviewed separately.