Analog Devices

ADM207EARZ - 5V 230kbps 5/3 RS-232 Transceiver | Analog Devices

MPN: ADM207EARZ ✓ Hoạt động
5 V Vdss 24-pin SOIC Package
MOQ: 1 |

ADM207EARZ Tóm tắt

The Analog Devices ADM207EARZ is a 5V RS-232 transceiver with five drivers and three receivers, operating at data rates up to 230 kbps in a 24-pin SOIC package. The device provides bidirectional RS-232 interface conversion for industrial, communications, and instrumentation equipment while operating from a single +5V supply.

An RS-232 transceiver is an interface IC that translates digital logic levels into RS-232 line levels and converts received line-level signals back into logic-level outputs. The ADM207E family belongs to the RS-232 interface transceiver hierarchy, which connects TTL or CMOS-compatible equipment to the voltage levels, impedance, and signaling characteristics of EIA-232E and CCITT V.28 links.

The principal features of the ADM207EARZ include five driver channels, three receiver channels, operation from a single 5V supply, and support for data rates up to 230 kbps. According to the Analog Devices ADM207E product page, the devices fully conform to the EIA-232E and CCITT V.28 specifications. Some members of the family also provide shutdown or enable controls, although individual control availability must be confirmed for the selected ordering code.

The multi-channel architecture allows one package to serve several point-to-point or multidrop RS-232 connections. Five drivers support outbound data or control signaling, while three receivers support inbound data and status signals. This channel balance is useful in equipment that must aggregate several serial links without requiring one separate transceiver package for every direction.

Typical uses include industrial serial controllers, test and measurement instruments, point-of-sale equipment, data acquisition systems, and external communication ports. The 24-pin SOIC package is readily handled by conventional surface-mount assembly and allows a compact interface section on a larger mixed-signal or control board.

PCB design should preserve the RS-232 interface as a distinct high-voltage, high-current domain rather than routing transceiver outputs through sensitive analog signals. Place the device close to the DB connector, maintain the required separation from unrelated circuitry, and follow the manufacturer pin and layout guidance when assigning protection components.

This page combines the ADM207E family specifications, ordering-code information, interface-family alternatives, and practical design considerations to support component selection, footprint review, and PCB implementation. The exact complete pin assignment and application circuit details should be checked in the manufacturer datasheet before schematic release.

Bộ thay thế dễ dàng lắp đặt cho ADM207EARZ — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.

Các biến thể trong loạt này

Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với ADM207EARZ (cùng hình factor và footprint) — khác nhau ở Driver Count, Interface Standard, Receiver Count, Maximum Data Rate, Package.

Analog Devices
Driver Count: 5 channels
Interface Standard: EIA-232E and CCITT V.28
Receiver Count: 3 channels
So sánh với ADM207EARZ →
Analog Devices
Driver Count: 4 drivers
Interface Standard: RS-232
Receiver Count: 4 receivers
So sánh với ADM207EARZ →

ADM207EAR

✅ Drop-In
Analog Devices
📦 24-pin SOIC
RS-232 transceiver · 5 channels · 3 channels · 5 V · 230 kbps · EIA-232E and CCITT V.28 · ±15 kV · 24-lead SOIC

Liên hệ để biết giá

Xem tài liệu →

ADM206EARZ

✅ Drop-In
📦 24-pin SOIC
Identically listed as a 5/3, 5 V, 230 kbps RS-232 interface in 24-pin SOIC; shutdown and enable behavior differ

📋 Tham chiếu thay thế (không có trong danh mục)

ADM207EAKZ

✅ Drop-In ⚠️ Thông số chưa được xác minh
📦 24-pin SOIC
Same 5/3 RS-232, 5 V, and 230 kbps family ratings; automotive-qualified ordering option rather than the standard ADM207EARZ

📋 Tham chiếu thay thế (không có trong danh mục)

ADM207EARSZ

✅ Drop-In ⚠️ Thông số chưa được xác minh
📦 24-pin SOIC
Same 5/3 RS-232, 5 V, and 230 kbps family ratings; ordering suffix denotes a different delivery or qualification configuration

📋 Tham chiếu thay thế (không có trong danh mục)

ADM207EARZ Thông số kỹ thuật

Product Type RS-232 transceiver
Driver Count 5 drivers
Receiver Count 3 receivers
Điện áp cung cấp 5 V
Supply Voltage Range 4.5 V to 5.5 V
Maximum Data Rate 230 kbps
Interface Standard EIA-232E
Interface Standard CCITT V.28
Khoảng nhiệt độ hoạt động -40 °C to +85 °C
Hộp 24-pin SOIC
Kiểu lắp đặt Surface mount
Số lượng chân 24 pins
Trạng thái RoHS RoHS-compliant
Lead-Free Status Lead-free

Hướng dẫn cấu hình chân ADM207EARZ 24-pin soic

Cấu hình chân cho ADM207EARZ (24-pin soic gói). Số thứ tự chân, chức năng và sơ đồ kết nối được xác định trong tài liệu thông số kỹ thuật của nhà sản xuất. Tham khảo nó để biết footprint và hướng dẫn hàn chính xác.

Bảng cấu hình chân 24-pin soic cho ADM207EARZ

Không có dữ liệu chân cụ thể sẵn có cho ADM207EARZ.

Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.

Ứng dụng tiêu biểu

ADM207EARZ phù hợp cho 6 Áp dụngs: Industrial Serial Data Acquisition, Test and Measurement Instrument Interface, Point-of-Sale Terminal Connectivity, Industrial Control and Monitoring, External Service and Configuration Port, Communication Adapter and Protocol Bridge.

🏭

Industrial Serial Data Acquisition

The ADM207EARZ fits an industrial data-acquisition controller that must translate several logic-level UART signals into RS-232 and receive up to three remote signals. Its five-driver and three-receiver configuration reduces the number of interface packages compared with several one-channel transceivers, while the 4.5V-to-5.5V supply range and -40 °C-to-+85 °C operating range support conventional industrial control boards. Each outbound line still needs correct RS-232 level translation, and the 230 kbps maximum should be checked against the instrument protocol, cable length, and grounding arrangement.

🔧

Test and Measurement Instrument Interface

The ADM207EARZ can provide multiple RS-232 links in a bench instrument, allowing commands to be transmitted and measurements, status, or alerts to be received over separate lines. The documented 5/3 channel balance is useful when the instrument has several peripheral connections but does not require a fully symmetric number of transmitters and receivers. Its 230 kbps capability is suitable for many control and status protocols, although slower legacy instruments may require specific timing compatibility that should be tested with the connected equipment.

🖥️

Point-of-Sale Terminal Connectivity

A point-of-sale terminal can use the ADM207EARZ to consolidate several serial peripherals, including a receipt printer, customer display, scanner, or status device. The five transmitters provide sufficient outbound channels for multiple command links, while three receivers support responses from selected devices. The 5V supply and 24-pin SOIC footprint simplify integration into control hardware. Designers should still consider whether legacy point-of-sale equipment uses hardware handshaking and should validate RS-232 polarity, connector assignment, and ground continuity for every peripheral.

🧩

Industrial Control and Monitoring

The ADM207EARZ is appropriate for a controller that must exchange commands, alarms, and diagnostic states with remote RS-232 equipment. Its five drivers and three receivers provide a practical channel allocation for one-to-many monitoring functions, and its -40 °C-to-+85 °C range covers common enclosure conditions. To preserve signal integrity, route the interface away from switching nodes, use a solid ground reference, and place connector protection close to the entry point. Verify the remote device’s driver and receiver counts because RS-232 is not a multi-drop bus.

🔧

External Service and Configuration Port

The ADM207EARZ can support a configuration and service interface containing one primary serial link plus additional control or diagnostic lines. The five-driver configuration permits auxiliary outputs for remote indicators or equipment control, while three receivers can monitor acknowledgments, interlocks, or status signals. Operating at up to 230 kbps allows compatibility with many legacy service protocols. The complete design should establish unambiguous driver-to-receiver connections, account for unused inputs, and avoid presenting multiple opposing RS-232 drivers onto the same node.

🌐

Communication Adapter and Protocol Bridge

The ADM207EARZ can form the host-side interface section of a communication adapter that bridges a microcontroller or programmable logic device to RS-232 equipment. Multiple channels allow command traffic to be separated from status and control traffic, reducing the need for additional transceiver packages. The 5V analog interface section can operate alongside digital control circuitry, but the RS-232 domain should be isolated physically from sensitive clocks and analog inputs. Confirm the adapter’s logical UART speed and handshake requirements against the 230 kbps device limit.

What is the ADM207EARZ?
The ADM207EARZ is a single-supply RS-232 transceiver with five drivers, three receivers, and support for data rates up to 230 kbps. Analog Devices identifies the ADM207E family as conforming to the EIA-232E and CCITT V.28 specifications. The ADM207EARZ ordering code is supplied in a 24-pin SOIC package and operates from a nominal +5V supply.
What is the operating voltage of ADM207EARZ?
The ADM207EARZ operates from a single +5V supply, with a documented supply range of 4.5V to 5.5V and an operating temperature range of -40 °C to +85 °C. These conditions match the Analog Devices ADM2xxE family description and the published ordering information for the 24-pin SOIC version.
How many RS-232 drivers and receivers does ADM207EARZ have?
The ADM207EARZ provides five RS-232 drivers and three receivers. This 5/3 arrangement lets one package handle several outbound signals and three inbound signals. The five-driver, three-receiver configuration is specifically identified in the product listing for the ADM207EARZ 24-pin SOIC ordering code.
What is the maximum data rate of ADM207EARZ?
The ADM207EARZ supports data rates up to 230 kbps. Analog Devices states that the ADM207E devices fully conform to the EIA-232E and CCITT V.28 specifications while operating at data rates up to 230 kbps. Actual installed throughput can also be limited by the connected equipment, cable, and termination arrangement.
Where can I download the ADM207EARZ datasheet?
The official ADM207E product and datasheet information is available on the Analog Devices product page at https://www.analog.com/en/products/adm207e.html. Use the manufacturer datasheet to confirm the complete 24-pin assignment, electrical limits, timing characteristics, recommended application circuit, and package drawing before finalizing the PCB layout.
Where can I find the ADM207EARZ pinout?
The ADM207EARZ pinout is defined in the manufacturer datasheet and its 24-pin SOIC package drawing. Use the pin-description table when assigning power, ground, driver outputs, receiver inputs, and any shutdown or enable functions. The public ADM207E product summary does not reproduce every terminal name, so the complete manufacturer pin table is the authoritative source.
What can replace the ADM207EARZ?
The ADM207EARZ can be replaced only after confirming the candidate has the same 24-pin SOIC footprint, matching driver and receiver orientation, compatible supply voltage, and equivalent RS-232 electrical characteristics. ADM206EARZ is identified as a parametric equivalent, while ADM207EAR and automotive order variants can provide engineering alternatives when their temperature, qualification, and ordering requirements match.
Is ADM207EARZ the same as ADM207EAR?
The ADM207EAR and ADM207EARZ belong to the same ADM207E family and share the documented 5/3 RS-232 architecture, 5V operation, 230 kbps capability, and 24-pin SOIC package. Their ordering suffixes can indicate different delivery or packaging arrangements, so engineers should confirm the full ordering code and mechanical configuration before substituting one for the other.
ADM207EARZ vs ADM206EARZ: which should I choose?
Choose the ADM207EARZ when the design requires the documented ADM207E 5/3 channel arrangement and its family-specific control or qualification characteristics. Consider ADM206EARZ when its power-management features better match the design and its verified 24-pin SOIC pinout is acceptable. Both are single-supply RS-232 devices, but shutdown and enable behavior should be compared before making a board-level substitution.
When should I choose ADM207EARZ over a one-channel RS-232 transceiver?
Choose the ADM207EARZ when the board must support several RS-232 lines in one package, particularly a combination of five outbound and three inbound signals. A one-channel device may be simpler when only one full-duplex link is required. The five/three arrangement can reduce package count, but every driver and receiver still needs correct RS-232 routing and protection.
Is ADM207EARZ suitable for industrial equipment?
The ADM207EARZ is suitable for industrial interface sections that use a 5V supply and require EIA-232E or CCITT V.28-compatible signaling. Its published -40 °C to +85 °C operating range covers many industrial environments. Final suitability still depends on transient immunity, ESD protection, grounding, and environmental requirements of the complete equipment.
How should I protect an ADM207EARZ RS-232 port?
Protect the external RS-232 lines with components selected for the required surge and ESD withstand ratings, and place them near the connector and away from sensitive logic. Keep driver outputs and receiver inputs away from clocks, analog inputs, and high-impedance nodes. Follow the manufacturer application guidance for bus topology, grounding, and connector protection.
What is the best Analog Devices equivalent for ADM207EARZ?
The closest Analog Devices parametric equivalent identified in the available cross-reference information is the ADM206EARZ. It belongs to the same single-supply ADM2xxE interface family and is listed as a parametric equivalent to ADM207EAR. Use it only after verifying its 24-pin SOIC pinout, shutdown or enable behavior, and all operating limits against the ADM207EARZ datasheet.
Where can I buy ADM207EARZ and what is the lead time?
Use the Request a Quote form on this page to request current ADM207EARZ availability, commercial terms, and lead time. The part is identified by Analog Devices as an ADM207E-family 5V, 5/3 RS-232 transceiver in a 24-pin SOIC package. Quote requests can also confirm the exact ordering suffix and delivery configuration needed for assembly.
How much does ADM207EARZ cost?
Use the Request a Quote form on this page for the current unit price, volume breaks, stock status, and lead time for ADM207EARZ. Commercial terms can vary with quantity, package configuration, and market conditions, so a current quotation is the appropriate source for procurement. The request should identify the complete 24-pin SOIC ordering code.
Is ADM207EARZ in stock?
Current stock for ADM207EARZ should be confirmed through the Request a Quote form on this page because channel inventory can change rapidly. The component is an Analog Devices 5V RS-232 transceiver in a 24-pin SOIC package, and a quotation can confirm availability, lot traceability, delivery configuration, and the production date required by the assembler.
What are the key specifications of ADM207EARZ that engineers should know?
The key ADM207EARZ specifications are a single 4.5V-to-5.5V supply, five drivers, three receivers, operation up to 230 kbps, EIA-232E and CCITT V.28 conformance, and a -40 °C-to-+85 °C operating range. It is packaged in 24-pin SOIC. These parameters define its channel count, signaling capability, environmental range, and PCB footprint.

Dữ liệu tham khảo kỹ thuật cho ADM207EARZ — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.

Hướng dẫn chọn lựa

Choose the ADM207EARZ when a board needs several RS-232 signals through one 24-pin SOIC package, particularly a 5/3 allocation of transmitters and receivers. It is appropriate for single +5V systems requiring operation up to 230 kbps and compatibility with EIA-232E or CCITT V.28 equipment. Choose the MAX3221IPWR or MAX3221CDBR when only one RS-232 link is needed and package count is not important. Consider the ADM206EARZ when its shutdown or enable behavior better supports the system power architecture, but verify the complete pinout and electrical limits before substitution. ADM207EAR-family ordering options may be relevant when a different delivery or automotive qualification configuration is required. For any replacement, confirm the 24-pin SOIC footprint, driver and receiver orientation, supply range, control pins, unused-pin behavior, and timing rather than relying only on the RS-232 protocol name.

So sánh với các sản phẩm thay thế

Tham số Sản phẩm này ADM207EAR ADM206EARZ ADM207EAKZ ADM207EARSZ
Package 24-pin SOIC 24-pin SOIC 24-pin SOIC 24-pin SOIC 24-pin SOIC
Brand Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices
Product Type RS-232 transceiver RS-232 transceiver RS-232 transceiver RS-232 transceiver RS-232 transceiver
Driver Count 5 drivers 5 drivers 5 drivers 5 drivers 5 drivers
Receiver Count 3 receivers 3 receivers 3 receivers 3 receivers 3 receivers
Supply Voltage 5 V 5 V 5 V 5 V 5 V
Maximum Data Rate 230 kbps 230 kbps 230 kbps 230 kbps 230 kbps
Interface Compliance EIA-232E and CCITT V.28 EIA-232E and CCITT V.28 EIA-232E and CCITT V.28 EIA-232E and CCITT V.28 EIA-232E and CCITT V.28

Bảo phân biệt quan trọng

  • Five transmitters and three receivers in one package (vsMAX3221IPWR)
  • Higher channel count for multi-signal equipment (vsMAX3221CDBR)
  • Documented high-speed family operation (vsMC1489AD)

Ghi chú thiết kế

Keep the ADM207EARZ and its protection network close to the RS-232 connector. Route driver outputs and receiver inputs away from crystals, switching regulators, magnetic components, and sensitive analog inputs. Maintain a continuous ground reference between the interface board and connected equipment; otherwise, the receiver may interpret common-mode noise as an invalid signal even when the data waveform is correct at the transmitter.

Do not connect two active RS-232 drivers to the same node, and do not treat RS-232 as a multi-drop bus. Each point-to-point path requires one driver and one receiver with the correct signal polarity. Before assigning unused pins, consult the complete manufacturer pin-description table and explicitly terminate unused receiver inputs so that floating inputs cannot create unpredictable states.

Place connector-side surge and ESD protection close to the entry point while keeping those protection components out of sensitive logic paths. The RS-232 driver outputs are high-voltage, high-current signaling nodes; excessive loop area can increase radiated emissions. Use a compact output route, an appropriate ground reference, and the manufacturer’s recommended protection topology. Validate emissions and immunity on the finished assembly rather than relying only on schematic review.

Thông tin tuân thủ

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
Không chì
Yes
Không halogen
Unknown
Khoáng vật xung đột
Unknown

A component listing identifies the ADM207EARZ as RoHS-compliant and lead-free. No automotive qualification applies to the standard ADM207EARZ ordering code; an automotive family ordering option should be reviewed separately.

Dữ liệu được xác minh vào: 2026-11-14 — dữ liệu được xác minh và quản lý bởi đội ngũ kỹ thuật phần cứng của XAIPART

Tìm kiếm liên quan

ADM207EARZ datasheet ADM207EARZ pinout ADM207EARZ datasheet pdf ADM207EARZ equivalent ADM207EARZ replacement ADM207EARZ cross reference ADM207EARZ vs ADM206EARZ ADM207EARZ price ADM207EARZ stock Analog Devices ADM207EARZ ADM207EARZ 24 SOIC ADM207EARZ 230 kbps RS-232

Các bộ phận và thuật ngữ liên quan

Analog Devices ADM207EARZ ADM207EAR ADM206EARZ ADM207EAKZ ADM207EARSZ RS-232 transceiver RS-232 interface line driver line receiver EIA-232E CCITT V.28 TTL-compatible logic CMOS-compatible logic 24-pin SOIC SOIC package family surface-mount package SMD single +5 V supply 230 kbps 5/3 channel configuration industrial serial interface test and measurement RS-232 ESD protection
Báo giá nhanh RFQ
Hãy điền đầy đủ thông tin — đội ngũ bán hàng của chúng tôi sẽ phản hồi trong vòng 24 giờ
Mã sản phẩm Nhà sản xuất Kiểu đóng gói QTY Giá mục tiêu Phụ
✓
Báo giá đã gửi!

Chúng tôi sẽ trả lời email của bạn trong vòng 24 giờ

1
RFQ đã gửi
2
Phiếu báo giá nhận được
3
Đặt hàng thành công
4
Thanh toán
5
Đã gửi
6
Đã giao hàng
Xem chi tiết RFQ