Analog Devices

ADM234LAQ 5V RS-232 Driver/Receiver | Analog Devices

部品番号: ADM234LAQ ✓ 生産中
5 V Vdss
MOQ: 1 |

ADM234LAQ 概要

The Analog Devices ADM234LAQ is a 5 V powered CMOS RS-232 driver and receiver interface IC with integrated DC-DC converters, 120 kB/s data-rate capability, and low-power shutdown support. The device is designed for single-supply systems that require RS-232 communication without a separate negative supply. The ADM234LAQ provides four drivers and four receivers in a 16-pin package, making it suitable for industrial control, instrumentation, data acquisition, and embedded equipment interfaces.

An RS-232 interface IC is a signal-conditioning device that converts logic-level digital signals into RS-232-compatible levels and converts incoming RS-232 signals back into CMOS logic levels. The RS-232 standard is widely used for point-to-point serial links in industrial equipment, test systems, and legacy computer peripherals. The ADM234LAQ belongs to the interface-IC hierarchy, where transceivers combine drivers, receivers, and the voltage-conversion functions required by the RS-232 electrical specification.

The ADM234LAQ operates from a single 5 V supply and includes on-board DC-DC converters that generate the negative voltage needed by an RS-232 line driver. The on-board converters reduce external power-supply complexity while allowing the device to meet RS-232 output-swing requirements from a 5 V source. Its CMOS implementation supports low-power operation and includes a shutdown function for systems where the interface must be disabled during inactive periods.

The device supports data rates up to 120 kB/s, making it appropriate for standard RS-232 links rather than high-speed differential protocols. Its receiver section is designed to reject noise and withstand the voltage range commonly encountered on RS-232 connections. The integrated four-driver and four-receiver organization supports multiple serial ports or separate control and data channels in one package.

Typical applications include industrial PLC and sensor interfaces, laboratory measurement equipment, barcode and scanner connections, service-console links, and embedded control boards. The single 5 V architecture is particularly useful when the host system does not provide a negative analog rail. The shutdown input can reduce system power when a port is not communicating, while the receiver remains active during shutdown according to the device features described by the manufacturer.

Designers should pay close attention to line-driver load, cable length, grounding, and logic-level compatibility. The RS-232 interface is point-to-point, and cable capacitance or excessive loading can reduce the usable data rate. Place the device close to the connector when practical, provide a low-impedance ground connection, and verify that the host UART voltage levels match the CMOS logic inputs and outputs. The integrated DC-DC architecture should be evaluated against the application’s noise requirements, particularly near sensitive analog measurement circuits.

ドロップイン代替品: ADM234LAQ — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。

このシリーズのバリエーション

同一シリーズでドロップイン互換のモデル: ADM234LAQ (同一形状・フットプリント) — 相違点: Mounting Type.

Analog Devices
Mounting Type: Through-hole
比較対象 ADM234LAQ →

この製品に利用可能なドロップイン代替品はありません。

代替品をリクエスト

ADM234LAQ 仕様

Product Type RS-232 driver/receiver interface IC
電源電圧 5 V
Supply Voltage Range 4.5 V to 5.5 V
データレート 120 kB/s
Number of Drivers 4
Number of Receivers 4
On-Board DC-DC Converter Yes
Output Swing 9 V
Low-Power Shutdown Yes
Receiver Input Voltage 30 V
RS-232 Standard Compliance EIA-232-E and V.28 specifications
Logic Family CMOS
ピン数 16 pins
実装タイプ Surface mount or through-hole package depending on orderable variant

ADM234LAQ standard ピン配置ガイド

ADM234LAQ (standard パッケージ) のピン配置。 ピン番号、機能、接続図はメーカーのデータシートで定義されています。正確なフットプリントとはんだ付けのガイドラインについては、データシートを参照してください。

ADM234LAQ の standard パッケージピン配置図

詳細なピン配置データはありません: ADM234LAQ.

詳細は データシート をご参照ください。

主な用途

ADM234LAQ の用途: 6 件s: Industrial Controller Serial Interface, Laboratory Measurement Equipment, Embedded Service and Configuration Port, Barcode and Scanner Connectivity, Instrumentation and Test System Backplane, Power and Process Monitoring Equipment.

🏭

Industrial Controller Serial Interface

The ADM234LAQ fits industrial controller and data-acquisition equipment that communicates through conventional RS-232 ports using a 5 V logic supply. Its four drivers and four receivers allow several serial channels to be consolidated into one 16-pin interface IC, while the 120 kB/s rating supports standard UART traffic. The integrated DC-DC converters generate the negative voltage required for RS-232 transmission, removing the need for a separate negative rail. For cable-connected equipment, use a solid ground reference, keep the interface close to the connector, and verify UART baud rate against cable length and capacitance.

🔧

Laboratory Measurement Equipment

The ADM234LAQ is useful in laboratory instruments that need a reliable RS-232 control and status connection from a 5 V powered circuit board. The single-supply architecture simplifies power planning, and the integrated DC-DC conversion avoids adding a separate negative analog supply. The 120 kB/s maximum data rate is appropriate for command and response traffic rather than continuous high-throughput transfers. Place the transceiver near the serial connector, terminate the cable ground reliably, and keep switching supplies away from sensitive analog sections to reduce coupling into measurement results.

🧩

Embedded Service and Configuration Port

The ADM234LAQ can provide a service or configuration port on embedded equipment where the main processor uses CMOS UART signals. Four receiver channels can monitor service commands, equipment status lines, or remote-control signals, while the driver channels support RS-232 connection to a host computer. The low-power shutdown feature helps reduce activity when the service port is not in use, while the manufacturer datasheet states that receivers remain active during shutdown. Confirm the host-side logic levels and connector pinout before finalizing the interface.

📷

Barcode and Scanner Connectivity

The ADM234LAQ is appropriate for barcode scanners, identification terminals, and industrial peripherals that expose an RS-232 host port. A 5 V system can create the required positive and negative RS-232 levels without a separate charge-pump supply, and the 120 kB/s capability is more than sufficient for ordinary scanner data bursts. Place input and output protection close to the connector, maintain a low-resistance signal-ground path, and confirm that the connected scanner uses compatible logic polarity and connector assignments.

📺

Instrumentation and Test System Backplane

The ADM234LAQ supports legacy test and instrumentation equipment that uses RS-232 for instrument control or service diagnostics. Four drivers and four receivers allow the instrument to connect several peripheral lines while sharing a compact 16-pin footprint. The integrated DC-DC converters simplify single-board instrument designs that provide only 5 V, and the 120 kB/s rate suits command-oriented protocols. Use shielded cable where required, maintain consistent ground references between connected equipment, and avoid routing the RS-232 traces beside high-current switching paths.

📡

Power and Process Monitoring Equipment

The ADM234LAQ can connect monitoring equipment, service laptops, and remote diagnostic adapters through RS-232 links. The four receiver channels are useful for monitoring multiple discrete status inputs, while the driver channels provide bidirectional command and response paths. Because the ADM234LAQ uses a 5 V supply and generates the negative RS-232 voltage internally, it can fit compact monitoring boards with limited power-tree capacity. Review board grounding and cable routing carefully in systems containing switching regulators or high-current relays to prevent ground bounce from corrupting the serial link.

What is the ADM234LAQ?
The ADM234LAQ is a 5 V powered CMOS RS-232 driver/receiver interface IC from Analog Devices. It combines four drivers, four receivers, and on-board DC-DC converters that generate the negative voltage required for RS-232 transmission. According to the manufacturer datasheet, it supports a 120 kB/s data rate and includes a low-power shutdown function.
What is the operating voltage of ADM234LAQ?
The ADM234LAQ operates from a single 5 V supply, with a stated supply range of 4.5 V to 5.5 V. The Analog Devices datasheet describes a CMOS RS-232 interface that includes on-board DC-DC converters, allowing the device to produce RS-232-compatible output levels without an external negative supply.
What is the maximum data rate of ADM234LAQ?
The ADM234LAQ supports a maximum data rate of 120 kB/s. This makes it suitable for conventional RS-232 links used by industrial controllers, test equipment, service consoles, and legacy peripherals. For longer cables or capacitive loads, the UART baud rate should be reduced as needed to preserve signal integrity.
Does ADM234LAQ require a negative power supply?
No. The ADM234LAQ includes on-board DC-DC converters that generate the negative voltage needed by the RS-232 drivers from a single 5 V supply. According to the manufacturer datasheet, the device provides a 9 V output swing from the 5 V supply, which simplifies interfaces where only a positive 5 V rail is available.
How many RS-232 drivers and receivers does ADM234LAQ have?
The ADM234LAQ provides four RS-232 drivers and four RS-232 receivers. The 16-pin package also includes power and shutdown-control functions. This channel count allows one IC to support several independent RS-232 lines or multiple receiver inputs on a multiport embedded system.
Where can I download the ADM234LAQ datasheet PDF?
The ADM234LAQ datasheet PDF is available through Analog Devices’ product documentation and the linked manufacturer-related datasheet listing. Use the pin-configuration table and electrical-characteristics tables when assigning connector signals, selecting bypass capacitors, and confirming logic thresholds. The package-specific drawing should be checked against the exact orderable variant.
Where can I find the ADM234LAQ pinout?
The ADM234LAQ pinout is shown in the manufacturer datasheet’s pin-configuration diagram and pin-description table. The device uses a 16-pin package, but the exact package drawing and the signal assigned to each lead should be taken from the ADM234LAQ datasheet. Use that table when planning the RS-232 connector and UART connections.
What can replace the ADM234LAQ?
The closest documented alternatives are the Analog Devices ADM232AARW and Maxim Integrated MAX234EPE+, which are identified in cross-reference material for RS-232 interface duties. However, their exact package and pin compatibility must be checked against the ADM234LAQ footprint before substitution. A functional RS-232 replacement is not automatically a drop-in replacement.
Is ADM234LAQ the same as ADM232AARW?
The ADM234LAQ and ADM232AARW are related RS-232 interface devices, but they are not automatically identical. The available comparison identifies differences in package and product characteristics, while the ADM234LAQ includes integrated DC-DC converters and a 120 kB/s data-rate specification. Confirm pinout, supply voltage, and package before replacing one with the other.
What is the best MAX234EPE+ equivalent for ADM234LAQ?
The MAX234EPE+ is a Maxim Integrated RS-232 interface alternative documented in the ADM234LAQ comparison material. It provides the same general category of single-supply RS-232 driver/receiver function, but the MAX234EPE+ is shown as a 16-pin PDIP package. Verify the ADM234LAQ package and pin mapping before treating it as a direct replacement.
When should I choose ADM234LAQ over an RS-232 alternative?
Choose the ADM234LAQ when the design needs a single 5 V RS-232 interface with four drivers, four receivers, integrated DC-DC conversion, and operation up to 120 kB/s. Its integrated negative-voltage generation is valuable when the board lacks a negative rail. Choose another device only after confirming package, pinout, supply range, and shutdown behavior match the system requirements.
Is ADM234LAQ suitable for industrial equipment?
The ADM234LAQ is suitable for industrial serial-interface designs that use RS-232 and a 5 V supply. Its receiver input tolerance, integrated DC-DC converters, and 120 kB/s capability fit conventional control and instrumentation links. For harsh environments, also verify the exact temperature rating, isolation requirements, grounding strategy, and applicable compliance status.
What are the key specifications of ADM234LAQ that engineers should know?
The ADM234LAQ is a 5 V powered CMOS RS-232 interface IC with four drivers, four receivers, integrated DC-DC converters, 120 kB/s operation, 9 V output swing, 30 V receiver-input capability, and low-power shutdown. According to the manufacturer datasheet, it meets EIA-232-E and V.28 specifications. These features define the core selection criteria for a single-supply RS-232 design.
Where can I buy ADM234LAQ online?
Use the Request a Quote form on this page to request ADM234LAQ availability, lead time, and commercial terms from XAIPART. The component is listed as a 5 V powered CMOS RS-232 driver/receiver interface, and the listing information identifies the Analog Devices ADM234LAQ. Submit the required quantity, package, and delivery information with the request.
What is the lead time for ADM234LAQ?
Current lead time should be requested through the Request a Quote form on this page because it can change with inventory, package configuration, and order quantity. The manufacturer-related listing identifies ADM234LAQ as a 5 V powered CMOS RS-232 driver/receiver interface. Include your required quantity and target delivery date so the current schedule can be confirmed.

エンジニアリング参考データ: ADM234LAQ — 比較、設計ガイダンス、コンプライアンス情報。

選定ガイド

Choose the ADM234LAQ when the design requires a single 5 V RS-232 interface with integrated DC-DC converters, four drivers, four receivers, and operation up to 120 kB/s. It is particularly suitable when the board does not have a negative rail and when several RS-232 lines must be consolidated. The ADM232AARW is a same-manufacturer functional alternative, but its package and electrical details must be checked before replacement. The MAX234EPE+ is a cross-brand functional alternative documented in comparison material; its 16-pin PDIP package is explicitly identified, so it is not automatically interchangeable with the ADM234LAQ footprint. Before selecting any substitute, compare the package drawing, pin numbering, supply range, shutdown behavior, receiver thresholds, and cable-routing requirements. Use the Request a Quote form for current commercial information.

代替品との比較

パラメータ この製品 ADM232AARW MAX234EPE+
Product Type 5 V powered CMOS RS-232 driver/receiver RS-232 driver/receiver RS-232 driver/receiver
Package 16-pin package PDIP-16 PDIP-16
Brand Analog Devices Analog Devices Maxim Integrated

主な差別化要因

  • Single 5 V supply with integrated negative-voltage conversion (vs ADM232AARW)
  • Documented 120 kB/s operating rate (vs MAX234EPE+)
  • Four drivers and four receivers in one 16-pin interface (vs MAX234EPE+)

設計ノート

Place the ADM234LAQ close to the RS-232 connector and route driver and receiver traces as short as practical. Keep the connector ground and the device ground connected with a short, low-impedance return path. Long stubs can increase ringing and make cable capacitance more influential, particularly when the UART operates near the 120 kB/s device limit.

Decouple the 5 V supply locally with the capacitance and placement specified in the manufacturer datasheet. Place the decoupling capacitor close to the supply pins and keep the return path short. Because the device contains on-board DC-DC converters, verify that switching noise from the internal converter does not interfere with nearby sensitive analog or timing circuits.

Do not assume that any RS-232 interface IC is a drop-in replacement. Confirm the package outline, lead numbering, driver and receiver assignments, shutdown polarity, supply range, and logic thresholds. The ADM232AARW and MAX234EPE+ are documented functional alternatives, but the available comparison material identifies package differences that must be resolved before PCB substitution.

Keep the RS-232 connector ground, cable shield termination, and analog ground reference strategy consistent with the equipment design. Avoid routing the interface through areas containing high-current switch nodes, relays, or inductors. For long or unshielded cables, lower the baud rate and use the receiver’s tolerance to support reliable operation in electrically noisy environments.

コンプライアンス情報

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
鉛フリー
Unknown
ハロゲンフリー
Unknown
紛争鉱物
Unknown

The manufacturer-related listing identifies EIA-232-E and V.28 specifications. RoHS, REACH, lead-free, halogen-free, conflict-minerals, and automotive qualification status are marked unknown because those attributes are not explicitly stated for this MPN.

データ検証日: 2026-11-09 — データはXAIPARTの部品エンジニアリングチームによって検証・管理されています

関連検索

ADM234LAQ datasheet ADM234LAQ pinout ADM234LAQ datasheet pdf ADM234LAQ equivalent ADM234LAQ replacement ADM234LAQ cross reference ADM234LAQ price ADM234LAQ stock Analog Devices ADM234LAQ ADM234LAQ 120 kB/s RS-232 ADM234LAQ 5V RS-232 interface ADM234LAQ package

関連部品&用語

Analog Devices ADM234LAQ RS-232 RS-232 driver RS-232 receiver CMOS interface IC single-supply interface DC-DC converter 5 V power supply 120 kB/s data rate EIA-232-E V.28 UART low-power shutdown 16-pin package industrial control laboratory instrumentation data acquisition barcode scanner service port 9 V output swing 30 V receiver input RS-232 transceiver interface IC hierarchy
クイック見積RFQ
詳細をすべてご記入ください — 営業チームが24時間以内にご返信いたします
部品番号 メーカー パッケージ QTY 目標価格 小計
✓
見積を送信しました!

24時間以内にメールでご返信いたします

1
RFQ送信済み
2
見積受領
3
注文済み
4
お支払い
5
発送済み
6
配達済み
RFQの詳細を表示