ADM3054BRWZ - 5kVrms Isolated CAN Transceiver | Analog Devices
部品番号: ADM3054BRWZ ✓ 生産中| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $4.85 | $4.85 |
| 10 | $4.36 | $43.60 |
| 100 | $3.88 | $388.00 |
| 500 | $3.49 | $1,745.00 |
| 1,000 | $3.1 | $3,100.00 |
ADM3054BRWZ 概要
A CAN transceiver is a device that interfaces between the CAN controller (e.g., a microcontroller with built-in CAN) and the physical differential bus. It converts the digital logic levels of the controller to the differential voltages required on the CAN bus and vice versa. Isolation is critical in harsh environments to protect the controller and users from high voltages, ground loops, and noise. The ADM3054 provides galvanic isolation up to 5 kV rms, ensuring safe and reliable communication in industrial automation, motor control, and electric vehicle applications.
Key features include 5 kV rms isolation, integrated DC-to-DC converter (for the BRWZ variant, it includes an integrated isolated power supply), bus protection up to ±58 V, and thermal shutdown. The device operates from a single 5 V supply on the logic side and a 5 V or 3.3 V supply on the bus side, with a typical data rate of 1 Mbps. It also features a high common-mode transient immunity of 25 kV/µs, ensuring robust operation in noisy environments.
The ADM3054 uses iCoupler technology, which uses chip-scale transformers to isolate signals, providing superior performance compared to optocouplers in terms of speed, power consumption, and reliability. The integrated DC-to-DC converter eliminates the need for an external isolated power supply, simplifying design and reducing board space. The device also includes a VIO pin for logic-level translation, allowing interface with 3.3 V or 5 V microcontrollers.
Typical applications include industrial fieldbus networks, motor control, HVAC systems, electric vehicle charging, and battery management systems. The high isolation voltage and robust bus protection make it ideal for applications where safety and reliability are paramount.
When designing with the ADM3054BRWZ, ensure proper PCB layout with adequate creepage and clearance distances for the isolation barrier. Place decoupling capacitors close to the VCC and VIO pins, and follow the recommended layout in the datasheet to achieve the specified isolation performance.
ドロップイン代替品: ADM3054BRWZ — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: ADM3054BRWZ （同一形状・フットプリント） — 相違点: Package, Isolation Voltage, Operating Temperature Range, Bus Protection, Standards.
クイック比較ツール — 並列比較する代替部品を選択:
ADM3054BRWZ-RL7
✅ ドロップイン✓ 在庫あり
$3.1 / 個
データシートを見る →ADM3054WBRWZ-RL7
✅ ドロップイン📋 参考代替品（カタログ未掲載）
ADM3053BRWZ-REEL7
⚡ 同一パッケージ📋 参考代替品（カタログ未掲載）
ADM2483BRWZ
⚡ 同一パッケージ✓ 在庫あり
$3.8182 / 個
データシートを見る →ISO1050DW
⚡ 同一パッケージ ⚠️ 仕様未検証📋 参考代替品（カタログ未掲載）
CTM1051KAT
⚡ 同一パッケージ ⚠️ 仕様未検証📋 参考代替品（カタログ未掲載）
ADM3054BRWZ 仕様
| Type | Isolated CAN Transceiver |
| Number of Drivers/Receivers | 1/1 |
| Isolation Voltage | 5 kVrms |
| データレート | 1 Mbps |
| Supply Voltage (Logic Side) | 5 V |
| Supply Voltage (Bus Side) | 5 V or 3.3 V |
| Bus Protection | ±58 V |
| Common-Mode Transient Immunity | 25 kV/µs |
| 動作温度範囲 | -40°C to +125°C |
| パッケージ | 16-SOIC (SOIC-16) |
| 実装タイプ | Surface Mount |
| RoHS ステータス | Compliant |
| Lead Free Status | Lead Free |
| Standards | ISO 11898 |
| Integrated Isolated Power | Yes (BRWZ variant) |
ADM3054BRWZ ピン構成
| ピン 1 | VCC — Logic side supply (5 V) |
| ピン 2 | GND1 — Logic side ground |
| ピン 3 | TXD — Transmit data input |
| ピン 4 | RXD — Receive data output |
| ピン 5 | VIO — Logic interface supply (3.3 V or 5 V) |
| ピン 6 | GND1 — Logic side ground |
| ピン 7 | NC — No connect |
| ピン 8 | NC — No connect |
| ピン 9 | CANH — CAN high bus line |
| ピン 10 | CANL — CAN low bus line |
| ピン 11 | GND2 — Bus side ground |
| ピン 12 | VISO — Isolated supply output (for BRWZ variant) |
| ピン 13 | GND2 — Bus side ground |
| ピン 14 | NC — No connect |
| ピン 15 | NC — No connect |
| ピン 16 | VCC — Logic side supply (5 V) |
主な用途
ADM3054BRWZ の用途: 6 件s: Industrial Automation, Motor Control, Electric Vehicle Charging, Battery Management Systems, HVAC Systems, Medical Equipment.
Industrial Automation
The ADM3054BRWZ provides 5 kVrms isolation and 1 Mbps data rate, making it ideal for industrial fieldbus networks where ground loops and noise are common. Its high common-mode transient immunity (25 kV/µs) ensures reliable communication in factory environments with motor drives and inverters. The integrated isolated power simplifies design, reducing board space and BOM cost. Use it to connect PLCs, sensors, and actuators over CAN bus with robust protection against voltage transients.
おすすめ
Motor Control
In motor control systems, the ADM3054BRWZ isolates the controller from the high-voltage motor drive side, preventing damage from transients and ground shifts. Its 5 kVrms isolation and ±58 V bus protection safeguard the microcontroller. The 1 Mbps data rate supports real-time control commands. The integrated DC-to-DC converter eliminates the need for an external isolated supply, simplifying the power architecture. This makes it suitable for variable frequency drives, servo drives, and robotics.
おすすめ
Electric Vehicle Charging
The ADM3054BRWZ is used in EV charging stations to isolate the communication between the charging controller and the vehicle's battery management system (BMS). Its 5 kVrms isolation meets safety requirements for high-voltage systems. The device operates over -40°C to +125°C, suitable for outdoor charging units. The integrated isolated power reduces component count, improving reliability. It supports CAN communication at 1 Mbps, enabling fast data exchange for charging status and control.
おすすめ
Battery Management Systems
In BMS, the ADM3054BRWZ isolates the cell monitoring ICs from the main controller, preventing ground loops and ensuring accurate voltage measurements. Its 5 kVrms isolation protects against high-voltage transients. The 1 Mbps data rate allows fast reporting of cell voltages and temperatures. The integrated isolated power simplifies the design, as no external isolated supply is needed. This makes it ideal for lithium-ion battery packs in electric vehicles and energy storage systems.
おすすめ
HVAC Systems
The ADM3054BRWZ is used in HVAC systems to connect thermostats, sensors, and controllers over a CAN bus. Its isolation prevents noise from compressors and fans from affecting the control electronics. The 5 kVrms isolation ensures safety in high-voltage environments. The device's wide temperature range and robust bus protection make it suitable for rooftop units and industrial HVAC. The integrated isolated power reduces design complexity, making it a cost-effective solution.
おすすめ
Medical Equipment
In medical devices, the ADM3054BRWZ provides galvanic isolation to protect patients and operators from electrical hazards. Its 5 kVrms isolation meets stringent safety standards. The device's low EMI and high transient immunity ensure reliable communication in sensitive environments. The integrated isolated power reduces leakage currents, enhancing patient safety. It is suitable for patient monitoring systems, diagnostic equipment, and surgical tools that require isolated CAN communication.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: ADM3054BRWZ — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | ADM3054BRWZ-RL7 | ADM3054WBRWZ-RL7 | ADM3053BRWZ-REEL7 | ISO1050DW |
|---|---|---|---|---|---|
| Package | 16-SOIC | 16-SOIC | 16-SOIC | 16-SOIC | 16-SOIC |
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Texas Instruments |
| Isolation Voltage | 5 kVrms | 5 kVrms | 5 kVrms | 2.5 kVrms | 5 kVrms |
| Data Rate | 1 Mbps | 1 Mbps | 1 Mbps | 1 Mbps | 1 Mbps |
| Bus Protection | ±58 V | ±58 V | ±58 V | ±58 V | ±58 V |
| Common-Mode Transient Immunity | 25 kV/µs | 25 kV/µs | 25 kV/µs | 25 kV/µs | 25 kV/µs |
| Integrated Isolated Power | Yes | Yes | Yes | No | No |
| Automotive Grade | No | No | Yes (AEC-Q100) | No | No |
主な差別化要因
- Integrated isolated power supply （vs ADM3053BRWZ-REEL7)
- Higher isolation voltage （vs ADM3053BRWZ-REEL7)
- Automotive grade option （vs ADM3054BRWZ-RL7)
設計ノート
For the ADM3054BRWZ, maintain proper creepage and clearance distances under the SOIC-16 package to achieve the 5 kVrms isolation rating. Use a PCB with at least 8 mm creepage between the logic and bus sides. Place a 100 nF decoupling capacitor close to VCC and VIO pins, and a 10 µF capacitor on VISO output if using the integrated isolated power.
The ADM3054BRWZ dissipates minimal power, but in high-temperature environments, ensure adequate airflow or copper area for heat dissipation. The integrated DC-to-DC converter may generate some heat; keep the ambient temperature within the -40°C to +125°C range. For continuous operation at high data rates, monitor the junction temperature.
Do not exceed the absolute maximum ratings on the bus pins (CANH, CANL) beyond ±58 V. Ensure the logic supply (VCC) and bus supply (VISO) are properly decoupled. When using the integrated isolated power, do not load VISO beyond its specified current limit. Also, verify that the VIO pin voltage matches the microcontroller's logic level to avoid communication errors.
コンプライアンス情報
RoHS compliant and lead-free per distributor data. AEC-Q100 not qualified for standard version; use ADM3054WBRWZ for automotive.
