L9616-TR - LIN Bus Transceiver | STMicroelectronics | Automotive
部品番号: L9616-TR ✓ 生産中| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $1.25 | $1.25 |
| 10 | $1.12 | $11.20 |
| 100 | $0.98 | $98.00 |
| 500 | $0.85 | $425.00 |
| 1,000 | $0.75 | $750.00 |
L9616-TR 概要
A LIN transceiver is a specialized integrated circuit that provides the physical layer for LIN networks, which are low-cost, single-wire serial communication buses used primarily in automotive body control applications. The transceiver converts the digital signals from the microcontroller's UART into bus-level voltages and vice versa, while providing protection against bus faults, ESD, and electromagnetic interference. In the system hierarchy, the LIN transceiver sits between the microcontroller (protocol layer) and the physical bus wire, forming the lowest layer of the LIN protocol stack.
Key features of the L9616-TR include a wide operating voltage range of 5V to 27V, making it compatible with automotive battery voltages, and a low quiescent current for power-saving in standby modes. The device supports both normal and standby operating modes, with a wake-up capability via the bus line. It also features thermal shutdown and short-circuit protection, ensuring robust operation in harsh automotive environments. The SO-8 package provides a compact footprint with a thermal resistance of approximately 150 C/W, suitable for moderate power dissipation.
The L9616-TR is built using STMicroelectronics' high-voltage BCD (Bipolar-CMOS-DMOS) technology, which integrates robust analog and digital circuitry on a single die. This technology enables the transceiver to handle high bus voltages and transient conditions while maintaining low power consumption. The device is fully compliant with the LIN 2.x and SAE J2602 standards, ensuring interoperability with other LIN nodes.
Typical applications include automotive body control modules, door modules, seat control, steering column switches, and industrial sensor networks. The L9616-TR is also used in aftermarket automotive electronics and diagnostic tools. Its wide input voltage range and robust protection features make it ideal for direct connection to the vehicle battery.
When designing with the L9616-TR, ensure proper bus termination (typically 1kΩ to 10kΩ pull-up to battery) and place a 100nF bypass capacitor close to the VCC pin. The TXD and RXD pins interface directly with the microcontroller's UART, and the INH pin can be used to control an external voltage regulator for power management in sleep mode.
ドロップイン代替品: L9616-TR — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
クイック比較ツール — 並列比較する代替部品を選択:
L9616
✅ ドロップイン📋 参考代替品（カタログ未掲載）
L9615
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品（カタログ未掲載）
TJA1020
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品（カタログ未掲載）
MCP2003
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品（カタログ未掲載）
L9616-TR 仕様
| Protocol | LIN 2.x, SAE J2602 |
| Supply Voltage (VCC) | 5 V to 27 V |
| データレート | Up to 20 kbps |
| Bus Voltage (LIN) | -27 V to +40 V |
| Quiescent Current (Sleep Mode) | 10 uA (typical) |
| 動作温度範囲 | -40C to +125C |
| パッケージ | SO-8 |
| 実装タイプ | Surface Mount |
| ピン数 | 8 |
| Wake-up Capability | Yes (via LIN bus) |
| Operating Modes | Normal, Standby, Sleep |
| 熱シャットダウン | Yes |
| Short-Circuit Protection | Yes |
| ESD Protection | ±8 kV (HBM) |
| RoHS ステータス | Compliant |
L9616-TR ピン構成
| ピン 1 | TXD — Transmit data input from microcontroller |
| ピン 2 | RXD — Receive data output to microcontroller |
| ピン 3 | VCC — Supply voltage (5V to 27V) |
| ピン 4 | GND — Ground |
| ピン 5 | LIN — LIN bus line |
| ピン 6 | INH — Inhibit control for external regulator |
| ピン 7 | NC — No connection |
| ピン 8 | NC — No connection |
主な用途
L9616-TR の用途: 6 件s: Automotive Body Control Module, Industrial Sensor Network, Aftermarket Automotive Electronics, Smart Lighting Systems, Telematics and Fleet Management, Electric Vehicle Battery Management.
Automotive Body Control Module
The L9616-TR is used in body control modules to interface with LIN-based sensors and actuators. Its wide supply voltage range (5V-27V) and robust protection features ensure reliable operation in automotive environments. The transceiver connects directly to the microcontroller's UART, enabling communication with door modules, window lifts, and mirror controls. Its low quiescent current (10 uA) in sleep mode helps reduce battery drain when the vehicle is off. The thermal shutdown and short-circuit protection prevent damage from bus faults, making it ideal for harsh automotive conditions.
おすすめ
Industrial Sensor Network
In industrial settings, the L9616-TR enables low-cost, single-wire communication between sensors and a central controller. Its data rate of up to 20 kbps is sufficient for transmitting sensor readings such as temperature, pressure, and position. The wide operating temperature range (-40C to +125C) allows deployment in harsh factory environments. The transceiver's ESD protection (±8 kV HBM) ensures robustness against electrostatic discharge during installation and maintenance. The INH pin can be used to control an external regulator, enabling power management in battery-powered sensor nodes.
おすすめ
Aftermarket Automotive Electronics
The L9616-TR is widely used in aftermarket automotive electronics such as car alarms, remote start systems, and diagnostic tools. Its compatibility with LIN 2.x and SAE J2602 ensures interoperability with OEM vehicle networks. The transceiver's small SO-8 package allows for compact PCB designs, fitting into tight spaces behind dashboards or in door panels. The wake-up capability via the LIN bus enables the system to remain in low-power mode until a command is received, extending battery life. The wide supply voltage range accommodates voltage fluctuations during engine start.
おすすめ
Smart Lighting Systems
The L9616-TR is used in smart lighting systems for automotive and architectural applications. In automotive lighting, it enables communication between the central lighting control module and LED drivers, allowing dynamic lighting features such as adaptive headlights and ambient lighting. The transceiver's high data rate (20 kbps) is sufficient for real-time control commands. Its robust protection features ensure reliable operation in the presence of electrical noise from the vehicle's electrical system. The low quiescent current is beneficial for lighting systems that remain in standby mode when not in use.
おすすめ
Telematics and Fleet Management
The L9616-TR is used in telematics units for fleet management, enabling communication between the vehicle's LIN network and a central tracking system. The transceiver's wide supply voltage range (5V-27V) allows direct connection to the vehicle battery, while its low quiescent current (10 uA) minimizes battery drain when the vehicle is parked. The wake-up capability via the LIN bus allows the telematics unit to remain in sleep mode until a bus message is received, reducing power consumption. The ESD protection ensures reliability in the harsh automotive environment.
おすすめ
Electric Vehicle Battery Management
The L9616-TR is used in electric vehicle battery management systems (BMS) to communicate between battery monitoring units and the central BMS controller. Its wide operating temperature range (-40C to +125C) is essential for battery packs that experience extreme temperatures. The transceiver's robust protection features, including short-circuit and thermal shutdown, ensure safe operation in high-voltage environments. The low quiescent current helps extend the battery life of the BMS when the vehicle is off. The LIN bus provides a cost-effective communication medium for distributed battery monitoring.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: L9616-TR — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | L9616 | L9615 | TJA1020 | MCP2003 |
|---|---|---|---|---|---|
| Package | SO-8 | SO-8 | SO-8 | SO-8 | SO-8 |
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | NXP Semiconductors | Microchip Technology |
| Supply Voltage Range | 5V to 27V | 5V to 27V | 5V to 27V | 5V to 27V | 6V to 18V |
| Data Rate | 20 kbps | 20 kbps | 20 kbps | 20 kbps | 20 kbps |
| Operating Temperature | -40C to +125C | -40C to +125C | -40C to +125C | -40C to +125C | -40C to +125C |
| AEC-Q100 Qualified | No | No | No | Yes | Yes |
| Wake-up Capability | Yes | Yes | Yes | Yes | Yes |
主な差別化要因
- Wide supply voltage range (5V-27V) （vs MCP2003)
- Low quiescent current (10 uA) （vs TJA1020)
- STMicroelectronics quality and support （vs TJA1020)
設計ノート
Place a 100nF bypass capacitor close to the VCC pin (pin 3) and a 10uF electrolytic capacitor for bulk decoupling. The LIN bus line (pin 5) should have a series resistor (typically 1kΩ) and a diode to protect against reverse polarity. Ensure the ground plane is solid to minimize noise.
The SO-8 package has a thermal resistance of approximately 150 C/W. At maximum supply voltage (27V) and typical bus current, power dissipation is low (less than 0.5W), so no heatsink is required. However, ensure adequate copper area on the PCB for heat spreading.
Do not exceed the absolute maximum ratings: supply voltage 40V, bus voltage -27V to +40V. Ensure the TXD pin is not left floating; pull it high or low as per datasheet. The INH pin can be used to control an external regulator; if unused, connect it to VCC.
コンプライアンス情報
RoHS compliant per STMicroelectronics product page. Not AEC-Q100 qualified; choose TJA1020 for automotive qualification.
