Analog Devices

ADM3202ANZ - 460 kbps Dual RS-232 Interface | Analog Devices

部品番号: ADM3202ANZ ✓ 生産中
3.3 V Vdss 16-lead PDIP Package
MOQ: 1 |

ADM3202ANZ 概要

The Analog Devices ADM3202ANZ is a high-speed, 2-channel RS-232/V.28 interface transceiver designed for operation from a single 3.3 V supply. It supports data rates up to 460 kbps, implements the receiver and transmitter functions required on two RS-232 ports, and is available in a 16-lead PDIP package for through-hole PCB assembly. The device uses 0.1 µF charge-pump capacitors and meets EIA-232E interface specifications.

An RS-232 interface transceiver is a semiconductor that converts logic-level signals between a host or controller and a physical RS-232 port. In this product hierarchy, the ADM3202 belongs to the interface IC category and provides bidirectional signal conditioning, voltage translation, and charge-pump support for RS-232/V.28 equipment. Unlike RS-485, an RS-232 link is point-to-point and uses unbalanced, single-ended signaling with defined logic thresholds.

Key features of the ADM3202ANZ include its 460 kbps maximum data rate, dual-channel architecture, and single 3.3 V operation. The two channels allow one device to connect two RS-232 ports, reducing component count in dual-port equipment. The 0.1 µF charge-pump capacitors support the elevated voltage and negative swing required by RS-232 drivers, while EIA-232E compliance provides a defined basis for signal compatibility and interoperability.

The ADM3202 family is offered in PDIP, SOIC_W, SOIC_N, and TSSOP package options. The Z suffix in ADM3202ANZ identifies the 16-lead PDIP configuration represented here. Its 460 kbps capability makes it substantially faster than legacy 20 kbps RS-232 transceivers, which can be useful for firmware upload, data acquisition, instrument control, and industrial service interfaces where higher communication throughput reduces transfer time.

Typical uses include industrial control equipment, test and measurement instruments, point-of-sale terminals, medical-device service ports, and embedded systems that communicate with legacy RS-232 peripherals. Designers should confirm the host interface levels, cable length, grounding method, and peripheral timing requirements because the RS-232 electrical standard does not define modern high-speed protocols or automatic handshaking on every connection.

For PCB implementation, place the charge-pump capacitors close to their designated pins, route transceiver and charge-pump currents away from sensitive analog signals, and provide a solid ground reference. The PDIP package facilitates inspection and rework but occupies more board area than the surface-mount variants. Verify the complete ADM3202 data sheet for pin orientation, decoupling requirements, and unused-pin handling before finalizing the layout.

This product page combines the manufacturer’s ADM3202 family specifications, exact-package identification, lifecycle information, interface standards, application guidance, drop-in candidates, and design-focused comparison points. It is intended to help engineers evaluate the ADM3202ANZ as a dual-channel 3.3 V RS-232 transceiver for both new designs and targeted replacement projects.

ドロップイン代替品: ADM3202ANZ — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。

このシリーズのバリエーション

同一シリーズでドロップイン互換のモデル: ADM3202ANZ (同一形状・フットプリント) — 相違点: Package, Supply Voltage, Interface Standard, Maximum Data Rate, Number of Drivers.

Analog Devices
Package: 16-pin PDIP
Interface Standard: EIA-232E and CCITT V.28
Maximum Data Rate: 230 kbps
比較対象 ADM3202ANZ →
MaxLinear
Package: 16-pin PDIP
Supply Voltage: +5 V single supply
Number of Drivers: 2
比較対象 ADM3202ANZ →

ADM3202AN

✅ ドロップイン
Analog Devices
📦 16-lead PDIP
2/2 full RS-232 transceiver · 2 channels · 2 channels · 3.3 V · 230 kbps · EIA-232E and CCITT V.28 · 4 external capacitors at 0.1 µF · Single positive 3.3 V supply

価格はお問い合わせください

データシートを見る →

SP232ECP-L

✅ ドロップイン
MaxLinear
📦 DIP-16
RS-232 line driver and receiver interface IC · 2/2 full RS-232 · 2 · 2 · +5 V single supply · +/-15 kV human-body model · 0 C to 70 C · RS-232-D and ITU V.28

価格はお問い合わせください

データシートを見る →

ADM3202ANZ 仕様

Product Type 2-channel RS-232/V.28 interface transceiver
Number of Channels 2 channels
Maximum Data Rate 460 kbps
電源電圧 3.3 V
Interface Standard EIA-232E
Charge-Pump Capacitor 0.1 µF
パッケージ 16-lead PDIP
ピン数 16 pins
実装タイプ Through-hole
Production Status Production
ESD Protection IEC 1000-4-2 (801.2)

ADM3202ANZ 16-lead pdip ピン配置ガイド

ADM3202ANZ (16-lead pdip パッケージ) のピン配置。 ピン番号、機能、接続図はメーカーのデータシートで定義されています。正確なフットプリントとはんだ付けのガイドラインについては、データシートを参照してください。

ADM3202ANZ の 16-lead pdip パッケージピン配置図

詳細なピン配置データはありません: ADM3202ANZ.

詳細は データシート をご参照ください。

主な用途

ADM3202ANZ の用途: 6 件s: Dual-Port Industrial Control Equipment, Test and Measurement Instruments, Point-of-Sale Terminals, Firmware Update and Service Ports, Embedded System Legacy Peripherals, Medical and Laboratory Equipment.

🏭

Dual-Port Industrial Control Equipment

The ADM3202ANZ fits industrial controllers that must communicate with two independent RS-232 devices, such as a local operator terminal and a configuration interface. Its two-channel architecture consolidates both ports into one 16-lead PDIP device, while the 460 kbps capability provides ample throughput for command, telemetry, and firmware traffic. Install the 0.1 µF charge-pump capacitors close to their specified pins and route driver-current paths away from sensitive analog circuitry. Because RS-232 is point-to-point, each channel should be assigned to its own peer and paired with suitable grounding.

🔧

Test and Measurement Instruments

The ADM3202ANZ is useful in test and measurement instruments that retain RS-232 ports for instrument control, calibration, or legacy test fixtures. The 460 kbps maximum rate can reduce command-response and transfer latency when the connected instrument also supports that signaling rate. The two channels can serve separate control and diagnostic functions, reducing the need for additional interface packages. Designers should use shielded cable where appropriate, maintain a stable signal-ground reference, and avoid treating the 460 kbps transceiver capability as permission to ignore the protocol timing and cable limitations of the peripheral.

🏭

Point-of-Sale Terminals

The ADM3202ANZ supports point-of-sale terminals that communicate with receipt printers, scanners, customer displays, or other legacy peripherals through RS-232. Its dual-channel capability can consolidate two peripheral connections, while the 460 kbps rate provides headroom for transaction and diagnostic data. The 3.3 V supply requirement is compatible with modern embedded controller rails. Keep the charge-pump capacitors within a short trace path and establish an appropriate common ground at the connector; poor grounding commonly causes more interface problems in deployed RS-232 equipment than the nominal signaling rate.

🖥️

Firmware Update and Service Ports

The ADM3202ANZ is appropriate for firmware update and service ports where technicians connect a host computer to equipment over RS-232. Its 460 kbps capability can shorten the transfer of configuration or firmware payloads compared with a 20 kbps transceiver, although end-device protocol support remains the limiting factor. The PDIP package is useful for prototypes, service-oriented industrial products, and designs where through-hole serviceability is preferred. Verify the exact MPN package code and ensure the host application uses compatible framing, parity, flow-control, and handshaking conventions.

🔧

Embedded System Legacy Peripherals

The ADM3202ANZ lets an embedded controller retain compatibility with legacy peripherals through a dedicated 3.3 V RS-232 interface. Its two channels allow one embedded board to support two accessories while avoiding a separate transceiver for each port. The 460 kbps maximum rate is valuable for bursty data transfers, but the attached peripheral must support the selected baud rate and protocol. Keep the connector-side protection and ground-return layout compact, and consult the full manufacturer data sheet before adding external surge or ESD protection to avoid incompatible signal loading.

💊

Medical and Laboratory Equipment

The ADM3202ANZ can support laboratory instruments or medical equipment that retain an RS-232 service or legacy-control interface. Its 460 kbps signaling capability allows efficient transfer when both endpoints support it, while the dual-channel arrangement can separate control traffic from diagnostic or service traffic. Through-hole packaging can aid prototype assembly and field rework. For medical deployments, engineers must independently validate system-level safety, isolation, grounding, and regulatory requirements; the transceiver’s EIA-232E and ESD specifications alone do not establish compliance for the finished equipment.

What is the ADM3202ANZ?
The ADM3202ANZ is a dual-channel RS-232/V.28 transceiver from Analog Devices that operates from a single 3.3 V supply and supports data rates up to 460 kbps. According to the ADM3202 manufacturer data sheet, the device provides two complete RS-232 channels in a 16-lead PDIP package and uses 0.1 µF charge-pump capacitors. It is suitable for dual-port equipment, legacy peripherals, industrial controllers, and test instruments.
What is the maximum data rate of the ADM3202ANZ?
The ADM3202ANZ supports a maximum signaling rate of 460 kbps. This rate is listed in the Analog Devices ADM3202 documentation and is substantially higher than the commonly encountered 20 kbps limit of older RS-232 transceivers. Actual application throughput also depends on the connected protocol, UART baud rate, parity, framing, software overhead, cable characteristics, and the capabilities of the peripheral at the opposite end of the link.
Where can I download the ADM3202ANZ datasheet PDF?
The ADM3202ANZ datasheet PDF is available from Analog Devices through the manufacturer data-sheet link on this page. The document covers the ADM3202, ADM3222, and ADM1385 interface-device family and identifies the ADM3202 as available in PDIP, SOIC_W, SOIC_N, and TSSOP options. Use the manufacturer pin-description table and package drawings when assigning signals on the 16-lead PDIP footprint.
Where can I find the ADM3202ANZ pinout?
The ADM3202ANZ pinout is defined in the pin-description table of the Analog Devices ADM3202 manufacturer data sheet. The ADM3202ANZ uses a 16-lead PDIP package, so the schematic symbol and PCB footprint must contain all 16 physical pins, including power, ground, receive and transmit signals, and charge-pump connections. Do not infer the complete pin map from a generic RS-232 transceiver because pin assignments can differ between device families.
Is the ADM3202ANZ suitable for a 3.3 V embedded system?
Yes, the ADM3202ANZ is designed for single 3.3 V operation, making it suitable for 3.3 V embedded controllers and RS-232 peripherals. The interface IC handles the electrical level translation between low-voltage logic and RS-232 signals while its internal charge-pump circuitry produces the bipolar voltage swing required by compliant drivers. Confirm signal levels, grounding, and timing at the system interface before using it with an RS-232 peripheral.
What applications suit the ADM3202ANZ?
The ADM3202ANZ fits dual-port industrial controllers, test and measurement instruments, firmware-download systems, point-of-sale equipment, and service interfaces for legacy peripherals. Its two RS-232 channels can connect two independent point-to-point ports in one device, while the 460 kbps capability can shorten transfer time compared with a 20 kbps transceiver. The selected peripheral must also support the corresponding signaling rate.
Where can I buy the ADM3202ANZ?
Use the Request a Quote form on this page to request the ADM3202ANZ from XAIPART. The form is the appropriate route for current availability, order quantities, and lead-time confirmation for the exact 16-lead PDIP orderable part number. Specify ADM3202ANZ clearly when submitting the request so the inquiry is not confused with the SOIC or TSSOP versions of the ADM3202 family.
What is the price of the ADM3202ANZ?
Current unit pricing and quantity-break availability for the ADM3202ANZ are handled through the Request a Quote form on this page. Quote responses depend on order quantity, package configuration, and current supply conditions. Enter the exact MPN ADM3202ANZ in the request so the quotation corresponds to the 16-lead PDIP device rather than another ADM3202 package option.
What is the lead time for the ADM3202ANZ?
The current lead time for the ADM3202ANZ should be confirmed through the Request a Quote form on this page. Lead time can vary with order quantity and inventory status, particularly when multiple internal or external ADM3202 package variants are requested together. Quote requests should identify the required quantity and the exact 16-lead PDIP MPN, ADM3202ANZ, for an actionable response.
Is the ADM3202ANZ in stock?
Current stock status for the ADM3202ANZ is best confirmed by submitting a request through the Request a Quote form on this page. The inquiry should state the required quantity and the exact MPN ADM3202ANZ. Because availability can change during fulfillment, a written quotation response should be used as the purchasing reference for production scheduling.
What is the best drop-in replacement for the ADM3202ANZ?
The ADM3202AN is the closest same-manufacturer candidate because it is identified in comparison data as a 16-pin PDIP RS-232 interface with the same through-hole format. The SP232ECP-L is another indexed DIP-16 replacement candidate, but its detailed electrical specifications must be checked before substitution. No five-part drop-in set could be confirmed from the available technical records, so board changes should not be assumed.
Can the SP232ECP-L replace the ADM3202ANZ?
The SP232ECP-L is indexed as a 16-pin through-hole RS-232 replacement candidate, but it should be treated as a conditional substitute rather than a guaranteed equivalent. The available comparison record confirms the DIP-16 classification but does not establish the ADM3202ANZ’s 460 kbps data rate, 3.3 V supply, charge-pump capacitor value, or exact pin mapping for the candidate. Verify every pin and timing parameter before production use.
ADM3202ANZ vs ADM3202AN — which is the better choice?
Choose ADM3202ANZ when the exact 16-lead PDIP orderable configuration is required and the supplier needs the complete suffix. The ADM3202AN is the shorter base designation for the same device family and is indexed as a 16-pin PDIP interface. Both refer to the 2/2 RS-232 transceiver family, but the final procurement decision should depend on the manufacturer’s complete ordering table, package code, temperature grade, and lifecycle marking.
When should I choose the ADM3202ANZ over another RS-232 transceiver?
Choose the ADM3202ANZ when the design needs two RS-232 channels, a single 3.3 V supply, a data rate as high as 460 kbps, and a through-hole 16-pin PDIP footprint. A slower legacy transceiver may be adequate for conventional asynchronous links, while a surface-mount device may be preferable for compact boards. Confirm the peripheral’s maximum rate and verify the exact 16-pin footprint before choosing the ADM3202ANZ.
What are the key specifications of ADM3202ANZ that engineers should know?
The ADM3202ANZ is a production 2/2 RS-232 interface transceiver with a 460 kbps maximum data rate, 3.3 V single-supply operation, EIA-232E compliance, 0.1 µF charge-pump capacitors, and a 16-lead PDIP package. According to the Analog Devices ADM3202 documentation, ESD protection is specified to IEC 1000-4-2. These parameters define its core suitability for high-speed dual-port RS-232 equipment.

エンジニアリング参考データ: ADM3202ANZ — 比較、設計ガイダンス、コンプライアンス情報。

選定ガイド

Choose the ADM3202ANZ when the board requires two RS-232 channels, operation from a 3.3 V supply, signaling capability up to 460 kbps, and a 16-lead through-hole package. It is especially appropriate for dual-port industrial controllers, legacy test equipment, service interfaces, and embedded systems where a surface-mount footprint is not required. The ADM3202AN is the closest same-manufacturer ordering candidate and should be selected when its complete ordering information confirms the intended configuration. Consider the SP232ECP-L only as a conditional DIP-16 alternative after checking its exact pinout, supply voltage, data rate, capacitor requirements, and driver/receiver thresholds. Do not choose a substitute solely because both parts are labeled as RS-232 transceivers or use 16-pin packages.

代替品との比較

パラメータ この製品 ADM3202AN SP232ECP-L
Brand Analog Devices Analog Devices Exar Corporation
Package 16-lead PDIP 16-pin PDIP DIP-16
Interface RS-232/V.28 RS-232/V.28 RS-232
Mounting Style Through-hole Through-hole Through-hole

主な差別化要因

  • Higher stated signaling rate than conventional 20 kbps RS-232 transceivers (vs SP232ECP-L)
  • Two complete RS-232 channels in one package (vs SP232ECP-L)
  • Single 3.3 V operation with documented charge-pump implementation (vs SP232ECP-L)
  • Documented EIA-232E and IEC 1000-4-2 interface specifications (vs SP232ECP-L)

設計ノート

Place the two 0.1 µF charge-pump capacitors as close as practical to the pins identified in the ADM3202 manufacturer data sheet. Keep the associated charge-pump traces short and route them away from sensitive analog inputs and communication references. Maintain a continuous ground plane under the device where PCB construction allows, and provide a dependable chassis or signal-ground return to the RS-232 connector to minimize common-mode voltage differences.

Assign the 16-lead PDIP footprint from the official package drawing rather than treating every DIP-16 RS-232 transceiver as interchangeable. The ADM3202ANZ uses a 16-lead PDIP configuration, but power, ground, charge-pump, receiver, and transmitter assignments must match the exact device being installed. Before substituting a cross-brand candidate, compare every pin electrically and verify the charge-pump capacitor value, supply range, driver polarity, and receiver thresholds.

The 460 kbps transceiver capability does not guarantee error-free communication over every cable length or peripheral implementation. Match the host and peripheral baud rates, data bits, parity, and stop bits, and verify whether the system relies on hardware or software flow control. For longer or electrically noisy RS-232 connections, use an appropriate cable, maintain a common reference ground, and consider adding interface protection without disturbing the transceiver’s biasing network.

コンプライアンス情報

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
鉛フリー
Unknown
ハロゲンフリー
Unknown
紛争鉱物
Unknown

The ADM3202 documentation identifies EIA-232E compliance and ESD protection to IEC 1000-4-2 (801.2). RoHS, REACH, lead-free, halogen-free, and conflict-minerals status were not established from the available product records. AEC-Q100 is not applicable to this general-purpose interface device.

データ検証日: 2026-11-14 — データはXAIPARTの部品エンジニアリングチームによって検証・管理されています

関連検索

ADM3202ANZ datasheet ADM3202ANZ datasheet pdf ADM3202ANZ pinout ADM3202ANZ footprint ADM3202ANZ equivalent ADM3202ANZ replacement ADM3202ANZ vs ADM3202AN ADM3202ANZ price ADM3202ANZ stock Analog Devices ADM3202ANZ ADM3202 460 kbps RS-232 ADM3202ANZ DIP-16 application circuit

関連部品&用語

Analog Devices ADM3202ANZ ADM3202AN SP232ECP-L RS-232 RS-232/V.28 EIA-232E interface IC RS-232 transceiver line driver line receiver charge-pump capacitor 460 kbps 3.3 V supply 16-lead PDIP DIP-16 through-hole package IEC 1000-4-2 ESD protection industrial control test and measurement point-of-sale terminal embedded system legacy peripheral
クイック見積RFQ
詳細をすべてご記入ください — 営業チームが24時間以内にご返信いたします
部品番号 メーカー パッケージ QTY 目標価格 小計
✓
見積を送信しました!

24時間以内にメールでご返信いたします

1
RFQ送信済み
2
見積受領
3
注文済み
4
お支払い
5
発送済み
6
配達済み
RFQの詳細を表示