ADM3202ANZ - 460 kbps Dual RS-232 Interface | Analog Devices
MPN: ADM3202ANZ ✓ فعالADM3202ANZ نمای کلی
An RS-232 interface transceiver is a semiconductor that converts logic-level signals between a host or controller and a physical RS-232 port. In this product hierarchy, the ADM3202 belongs to the interface IC category and provides bidirectional signal conditioning, voltage translation, and charge-pump support for RS-232/V.28 equipment. Unlike RS-485, an RS-232 link is point-to-point and uses unbalanced, single-ended signaling with defined logic thresholds.
Key features of the ADM3202ANZ include its 460 kbps maximum data rate, dual-channel architecture, and single 3.3 V operation. The two channels allow one device to connect two RS-232 ports, reducing component count in dual-port equipment. The 0.1 µF charge-pump capacitors support the elevated voltage and negative swing required by RS-232 drivers, while EIA-232E compliance provides a defined basis for signal compatibility and interoperability.
The ADM3202 family is offered in PDIP, SOIC_W, SOIC_N, and TSSOP package options. The Z suffix in ADM3202ANZ identifies the 16-lead PDIP configuration represented here. Its 460 kbps capability makes it substantially faster than legacy 20 kbps RS-232 transceivers, which can be useful for firmware upload, data acquisition, instrument control, and industrial service interfaces where higher communication throughput reduces transfer time.
Typical uses include industrial control equipment, test and measurement instruments, point-of-sale terminals, medical-device service ports, and embedded systems that communicate with legacy RS-232 peripherals. Designers should confirm the host interface levels, cable length, grounding method, and peripheral timing requirements because the RS-232 electrical standard does not define modern high-speed protocols or automatic handshaking on every connection.
For PCB implementation, place the charge-pump capacitors close to their designated pins, route transceiver and charge-pump currents away from sensitive analog signals, and provide a solid ground reference. The PDIP package facilitates inspection and rework but occupies more board area than the surface-mount variants. Verify the complete ADM3202 data sheet for pin orientation, decoupling requirements, and unused-pin handling before finalizing the layout.
This product page combines the manufacturer’s ADM3202 family specifications, exact-package identification, lifecycle information, interface standards, application guidance, drop-in candidates, and design-focused comparison points. It is intended to help engineers evaluate the ADM3202ANZ as a dual-channel 3.3 V RS-232 transceiver for both new designs and targeted replacement projects.
جایگزینهای drop-in برای ADM3202ANZ — همان پکیج، سازگار پینبهپین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.
گونهها در این سری
مدلهای همسری که جایگزین مستقیم هستند برای ADM3202ANZ (همان فرمفاکتور و فوتپرینت) — متفاوت در Package, Supply Voltage, Interface Standard, Maximum Data Rate, Number of Drivers.
ADM3202AN
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←SP232ECP-L
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←ADM3202ANZ مشخصات
| Product Type | 2-channel RS-232/V.28 interface transceiver |
| Number of Channels | 2 channels |
| Maximum Data Rate | 460 kbps |
| ولتاژ تغذیه | 3.3 V |
| Interface Standard | EIA-232E |
| Charge-Pump Capacitor | 0.1 µF |
| بستهبندی | 16-lead PDIP |
| تعداد پایه | 16 pins |
| نوع نصب | Through-hole |
| Production Status | Production |
| ESD Protection | IEC 1000-4-2 (801.2) |
راهنمای پیکربندی پین ADM3202ANZ 16-lead pdip
پیکربندی پین برای ADM3202ANZ (پکیج 16-lead pdip). شمارهگذاری پایهها، عملکردها و نمودارهای اتصال در دیتاشیت سازنده تعریف شده است. برای footprint دقیق و دستورالعملهای لحیمکاری به آن مراجعه کنید.
داده پینآوت تفصیلی موجود نیست برای ADM3202ANZ.
به دیتاشیت برای پیکربندی کامل پینها.
کاربردهای معمول
ADM3202ANZ مناسب است برای 6 کاربردs: Dual-Port Industrial Control Equipment, Test and Measurement Instruments, Point-of-Sale Terminals, Firmware Update and Service Ports, Embedded System Legacy Peripherals, Medical and Laboratory Equipment.
Dual-Port Industrial Control Equipment
The ADM3202ANZ fits industrial controllers that must communicate with two independent RS-232 devices, such as a local operator terminal and a configuration interface. Its two-channel architecture consolidates both ports into one 16-lead PDIP device, while the 460 kbps capability provides ample throughput for command, telemetry, and firmware traffic. Install the 0.1 µF charge-pump capacitors close to their specified pins and route driver-current paths away from sensitive analog circuitry. Because RS-232 is point-to-point, each channel should be assigned to its own peer and paired with suitable grounding.
پیشنهادی
Test and Measurement Instruments
The ADM3202ANZ is useful in test and measurement instruments that retain RS-232 ports for instrument control, calibration, or legacy test fixtures. The 460 kbps maximum rate can reduce command-response and transfer latency when the connected instrument also supports that signaling rate. The two channels can serve separate control and diagnostic functions, reducing the need for additional interface packages. Designers should use shielded cable where appropriate, maintain a stable signal-ground reference, and avoid treating the 460 kbps transceiver capability as permission to ignore the protocol timing and cable limitations of the peripheral.
پیشنهادی
Point-of-Sale Terminals
The ADM3202ANZ supports point-of-sale terminals that communicate with receipt printers, scanners, customer displays, or other legacy peripherals through RS-232. Its dual-channel capability can consolidate two peripheral connections, while the 460 kbps rate provides headroom for transaction and diagnostic data. The 3.3 V supply requirement is compatible with modern embedded controller rails. Keep the charge-pump capacitors within a short trace path and establish an appropriate common ground at the connector; poor grounding commonly causes more interface problems in deployed RS-232 equipment than the nominal signaling rate.
پیشنهادی
Firmware Update and Service Ports
The ADM3202ANZ is appropriate for firmware update and service ports where technicians connect a host computer to equipment over RS-232. Its 460 kbps capability can shorten the transfer of configuration or firmware payloads compared with a 20 kbps transceiver, although end-device protocol support remains the limiting factor. The PDIP package is useful for prototypes, service-oriented industrial products, and designs where through-hole serviceability is preferred. Verify the exact MPN package code and ensure the host application uses compatible framing, parity, flow-control, and handshaking conventions.
پیشنهادی
Embedded System Legacy Peripherals
The ADM3202ANZ lets an embedded controller retain compatibility with legacy peripherals through a dedicated 3.3 V RS-232 interface. Its two channels allow one embedded board to support two accessories while avoiding a separate transceiver for each port. The 460 kbps maximum rate is valuable for bursty data transfers, but the attached peripheral must support the selected baud rate and protocol. Keep the connector-side protection and ground-return layout compact, and consult the full manufacturer data sheet before adding external surge or ESD protection to avoid incompatible signal loading.
پیشنهادی
Medical and Laboratory Equipment
The ADM3202ANZ can support laboratory instruments or medical equipment that retain an RS-232 service or legacy-control interface. Its 460 kbps signaling capability allows efficient transfer when both endpoints support it, while the dual-channel arrangement can separate control traffic from diagnostic or service traffic. Through-hole packaging can aid prototype assembly and field rework. For medical deployments, engineers must independently validate system-level safety, isolation, grounding, and regulatory requirements; the transceiver’s EIA-232E and ESD specifications alone do not establish compliance for the finished equipment.
پیشنهادی
خلاصه محصولات پیشنهادی
دادههای مرجع مهندسی برای ADM3202ANZ — مقایسه، راهنمای طراحی و اطلاعات انطباق.
راهنمای انتخاب
مقایسه با جایگزینها
| پارامتر | این محصول | ADM3202AN | SP232ECP-L |
|---|---|---|---|
| Brand | Analog Devices | Analog Devices | Exar Corporation |
| Package | 16-lead PDIP | 16-pin PDIP | DIP-16 |
| Interface | RS-232/V.28 | RS-232/V.28 | RS-232 |
| Mounting Style | Through-hole | Through-hole | Through-hole |
تفاوتهای کلیدی
- Higher stated signaling rate than conventional 20 kbps RS-232 transceivers (در مقابلSP232ECP-L)
- Two complete RS-232 channels in one package (در مقابلSP232ECP-L)
- Single 3.3 V operation with documented charge-pump implementation (در مقابلSP232ECP-L)
- Documented EIA-232E and IEC 1000-4-2 interface specifications (در مقابلSP232ECP-L)
یادداشتهای طراحی
Place the two 0.1 µF charge-pump capacitors as close as practical to the pins identified in the ADM3202 manufacturer data sheet. Keep the associated charge-pump traces short and route them away from sensitive analog inputs and communication references. Maintain a continuous ground plane under the device where PCB construction allows, and provide a dependable chassis or signal-ground return to the RS-232 connector to minimize common-mode voltage differences.
Assign the 16-lead PDIP footprint from the official package drawing rather than treating every DIP-16 RS-232 transceiver as interchangeable. The ADM3202ANZ uses a 16-lead PDIP configuration, but power, ground, charge-pump, receiver, and transmitter assignments must match the exact device being installed. Before substituting a cross-brand candidate, compare every pin electrically and verify the charge-pump capacitor value, supply range, driver polarity, and receiver thresholds.
The 460 kbps transceiver capability does not guarantee error-free communication over every cable length or peripheral implementation. Match the host and peripheral baud rates, data bits, parity, and stop bits, and verify whether the system relies on hardware or software flow control. For longer or electrically noisy RS-232 connections, use an appropriate cable, maintain a common reference ground, and consider adding interface protection without disturbing the transceiver’s biasing network.
اطلاعات انطباق
The ADM3202 documentation identifies EIA-232E compliance and ESD protection to IEC 1000-4-2 (801.2). RoHS, REACH, lead-free, halogen-free, and conflict-minerals status were not established from the available product records. AEC-Q100 is not applicable to this general-purpose interface device.