ADSP-2181KS-115 - 40 MIPS 16-Bit DSP | Analog Devices
部品番号: ADSP-2181KS-115 ✓ 生産中ADSP-2181KS-115 概要
A digital signal processor, commonly called a DSP, is a semiconductor architecture optimized for arithmetic-intensive operations on sampled signals. DSPs sit above general-purpose microprocessors in the computing hierarchy because dedicated execution units and high-bandwidth internal data paths improve throughput for multiply-accumulate operations. The ADSP-2181 belongs to the ADSP-2100 family and combines this DSP architecture with microcomputer peripherals, memory, serial communication, and host-interface functions.
Key features include 16K words of 24-bit program RAM, 16K words of 16-bit data RAM, single-cycle instruction execution, single-cycle context switching, and a three-bus architecture that permits dual-operand fetches during an instruction cycle. Two serial ports support synchronous data transfer, while the host port allows a host processor to access DSP resources. Power-down circuitry is included for battery-operated portable equipment.
The ADSP-2181 architecture uses three computational units: an arithmetic logic unit, a multiplier, and a shifter. This organization supports the ADSP-2100 instruction set without requiring a general-purpose instruction pipeline for every signal-processing operation. The 25 ns instruction cycle and 40 MIPS sustained rate are particularly useful for FIR filters, IIR filters, spectral analysis, modulation, waveform generation, and embedded audio or communications processing.
Typical applications include industrial motor and motion control, communications equipment, audio and speech processing, instrumentation, radar signal processing, medical monitoring, and portable measurement systems. The host port is valuable when an external controller handles configuration or system-level sequencing while the DSP executes computation-intensive algorithms.
Designers should account for the 128-pin PQFP footprint, 5 V supply requirements, clock-source configuration, memory interface timing, and thermal dissipation at sustained processing rates. Use the manufacturer pin-description table when assigning PCB nets and follow the recommended decoupling and clock-layout guidance in the ADSP-2181 datasheet.
This product page organizes the core architecture, memory organization, interface capabilities, application guidance, and package considerations into a practical design reference. It also identifies family alternatives and highlights the distinctions that must be checked before approving a replacement.
ドロップイン代替品: ADSP-2181KS-115 — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
ADSP-2181BSTZ-133
✅ ドロップイン📋 参考代替品(カタログ未掲載)
ADSP-2181BSZ-133
✅ ドロップイン📋 参考代替品(カタログ未掲載)
ADSP-2181KS-115 仕様
| Product Type | 16-bit fixed-point digital signal processor and microcomputer |
| Processor Architecture | ADSP-2100 family architecture |
| Instruction Word Length | 24-bit |
| Data Word Length | 16-bit |
| Sustained Performance | 40 MIPS |
| Instruction Cycle Time | 25 ns |
| External Clock Source | 20 MHz crystal |
| On-Chip Memory | 80 KB total |
| Program RAM | 16K words x 24-bit |
| Data RAM | 16K words x 16-bit |
| Computational Units | 3 units |
| Internal Data Bus Architecture | 3-bus architecture |
| Serial Ports | 2 ports |
| Host Port | Present |
| 電源電圧 | 5 V |
| パッケージ | 128-pin PQFP |
| 実装タイプ | Surface mount |
| On-Chip Emulation | Supported |
| ICE-Port Connection | 14-pin connection |
| Power-Down Circuitry | Supported |
ADSP-2181KS-115 128-pin pqfp ピン配置ガイド
ADSP-2181KS-115 (128-pin pqfp パッケージ) のピン配置。 ピン番号、機能、接続図はメーカーのデータシートで定義されています。正確なフットプリントとはんだ付けのガイドラインについては、データシートを参照してください。
詳細なピン配置データはありません: ADSP-2181KS-115.
詳細は データシート をご参照ください。
主な用途
ADSP-2181KS-115 の用途: 6 件s: Digital Audio Filtering, Industrial Motor Control, Communications Signal Processing, Portable Measurement Systems, Medical Signal Monitoring, Instrumentation and Spectrum Analysis.
Digital Audio Filtering
The ADSP-2181KS-115 fits digital audio filtering because its 16-bit fixed-point architecture, 25 ns instruction cycle, and three computational units can sustain the multiply-accumulate workload required by FIR and IIR filters. The 80 KB of on-chip memory provides room for program code, coefficients, and working data without requiring an external memory device in moderate designs. Its two serial ports can connect to audio converters or a separate transport controller. Designers should preserve timing margin, use the recommended clock arrangement, and verify coefficient precision and headroom at the selected system clock.
おすすめ
Industrial Motor Control
The ADSP-2181KS-115 is applicable to industrial motor-control loops where filtering, control-law calculation, and signal transformation must execute predictably. Its three-bus architecture permits dual-operand fetches, while the arithmetic, multiply, and shift units support efficient fixed-point control algorithms. The host port allows a supervisory controller to exchange commands or status while the DSP handles time-critical numeric processing. Practical designs must ensure that control-loop latency, serial timing, supply integrity, and thermal rise are acceptable across the industrial temperature range.
おすすめ
Communications Signal Processing
The ADSP-2181KS-115 can support communications signal-processing blocks requiring deterministic execution of filters, modulation, demodulation, and spectrum-related operations. Two serial ports permit synchronous interfaces to converters, framing circuits, or another processor, while the host port provides a path for higher-level control. Its 40 MIPS sustained performance and 80 KB memory capacity are useful for compact dedicated nodes. Interface design must account for clock-domain relationships, serial-port timing, impedance-controlled routing, grounding, and decoupling around the 5 V supply.
おすすめ
Portable Measurement Systems
The ADSP-2181KS-115 suits portable instruments and battery-powered measurement systems that need real-time numeric processing in a compact component. The on-chip program RAM, data RAM, serial ports, and host interface consolidate a useful processing subsystem without requiring several support devices. Power-down circuitry supports low-power operating strategies, although total energy consumption depends on clocking, duty cycle, peripheral use, and board-level leakage. A power-conscious design should disable unused functions, select an appropriate processor clock, and measure the complete board rather than the DSP alone.
おすすめ
Medical Signal Monitoring
The ADSP-2181KS-115 can implement filtering and analysis in medical monitoring equipment when deterministic fixed-point computation and local control are required. Its 40 MIPS execution rate supports time-domain and frequency-domain processing, while the host port allows a higher-level controller to manage display, storage, and user-interface functions. Because this is an older DSP family, the final medical design should address applicable product-quality, risk-management, and electromagnetic-compatibility requirements beyond the component's basic operating specifications.
おすすめ
Instrumentation and Spectrum Analysis
The ADSP-2181KS-115 is appropriate for embedded instrumentation that performs real-time filtering, windowing, FFT-related computation, calibration, and parameter extraction. Its three computational units and three-bus architecture improve the throughput of arithmetic-intensive sequences, while 80 KB of integrated memory supports compact algorithms. The host port permits configuration commands and result transfer to a system controller. Designers should place support circuitry for converters and references according to the datasheet, keep sensitive analog and digital return currents separated, and validate timing at the intended operating frequency.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: ADSP-2181KS-115 — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | ADSP-2181BSTZ-133 | ADSP-2181BSZ-133 |
|---|---|---|---|
| Brand | Analog Devices | Analog Devices | Analog Devices |
| Package | 128-pin PQFP | 128-pin PQFP | 128-pin PQFP |
| Processor Architecture | ADSP-2100 family | ADSP-2181 family | ADSP-2181 family |
| Data Width | 16-bit | 16-bit | 16-bit |
| On-Chip Memory | 80 KB | 80 KB | 80 KB |
| Clock Designation | -115 | -133 | -133 |
| Serial Ports | 2 | 2 | 2 |
| Host Port | Present | Present | Present |
主な差別化要因
- Exact -115 clock configuration (vs ADSP-2181BSTZ-133)
- Documented 28.8 MHz listing (vs ADSP-2181BSTZ-133)
- Unified ADSP-2181 architecture (vs TMS320BC53PQ57)
設計ノート
Place the required input and bypass capacitors directly across the appropriate 5 V power pins, following the capacitor values and pin assignments in the manufacturer datasheet. Keep the return path short and preserve the separation between noisy digital switching current and sensitive analog reference or converter ground. Estimate worst-case regulator dissipation from the actual input-to-output difference and total supply current rather than using processor throughput as a thermal proxy.
Route the processor clock from its source to the dedicated clock pins with controlled impedance, minimal stubs, and no unnecessary test pads. The ADSP-2180 architecture uses a three-bus internal data path, so memory and peripheral interface timing must satisfy the access requirements listed in the datasheet. Use the package pin-description table to assign every 128-pin PQFP net and verify the pad sequence against the mechanical drawing before releasing artwork.
Do not approve an ADSP-2181 family substitute from the family name alone. Confirm the package drawing, clock designation, operating-temperature limits, power-supply requirements, pin multiplexing, and software initialization sequence. The ADSP-2181BSTZ-133 and ADSP-2181BSZ-133 use a different -133 clock designation from the -115 target, so timing changes and firmware or hardware revalidation may be necessary.
Evaluate junction temperature using the maximum ambient temperature, package thermal characteristics, processor activity, clock configuration, and board thermal resistance. A 128-pin PQFP provides many leads for electrical and modest thermal conduction, but sustained 40 MIPS operation still requires copper area and airflow consistent with the manufacturer's thermal guidance. Avoid mounting the package over a thermal void unless the board construction specifically supports that condition.
コンプライアンス情報
The manufacturer datasheet and product page do not state the requested compliance statuses. AEC-Q100 qualification is not applicable to this general-purpose DSP.