AKM (Asahi Kasei Microdevices)

AK4112BVM - 24-Bit 4-Channel Audio Receiver | AKM

部品番号: AK4112BVM ✓ 生産中
28-SSOP Package 96 kHz Speed
MOQ: 1 |

AK4112BVM 概要

The Asahi Kasei Microdevices AK4112BVM is a four-channel digital audio receiver built around the AKM AK4112B architecture and packaged in a 28-pin SSOP. It is designed to receive digital audio streams and provide the decoding and digital-interface functions required by multi-channel audio systems. The manufacturer datasheet identifies the device as a 24-bit DIR with operation up to 96 kHz, making it applicable to consumer electronics, broadcast equipment, and digital audio products that process standard high-resolution PCM streams.

A digital audio receiver, abbreviated DIR, converts a serial digital audio stream into the internal PCM representation used by audio processing, storage, and playback systems. Within the broader semiconductor hierarchy, the AK4112BVM belongs to the audio interface IC category, with the DIR function providing a bridge between external digital-audio transports and downstream digital signal processing. Its four-channel architecture allows multiple synchronized audio channels to be handled by one receiver rather than through separate single-channel devices.

The AK4112BVM supports 24-bit audio processing and sampling frequencies up to 96 kHz. These figures define the principal signal-fidelity and bandwidth requirements of the receiver. The four-channel capability is particularly useful in surround-sound and multi-zone audio equipment, where several channels must share a common device. As a dedicated audio interface IC, the part can simplify clocking and channel management compared with implementing equivalent receiver functions in programmable logic or a general-purpose processor.

The AK4112BVM integrates digital audio reception with the AK4112B function set in a compact 28-SSOP package. The package gives an equipment designer a traditional surface-mount implementation with a 28-pin lead arrangement. Because digital audio receivers depend on stable clocking and correctly matched input timing, power-supply sequencing, grounding, and signal routing remain as important as the nominal sample-rate capability. The receiver should be placed according to the manufacturer's pin-description and application-circuit guidance rather than treated as a generic logic IC.

Typical applications include digital audio equipment, home-theater and surround-sound processors, broadcast and professional audio equipment, recording-system interfaces, and other products receiving multiple channels of PCM digital audio. At 96 kHz and 24-bit resolution, the device addresses high-resolution audio use cases while retaining the relatively compact package and integrated four-channel receiver architecture. The exact clock requirements, supported digital-audio formats, and signal-level details should be confirmed in the manufacturer datasheet before finalizing a system design.

A key design consideration is the relationship between the digital-audio source, the receiver clock, and downstream logic. Route the digital input with controlled impedance, keep return paths continuous, and place required bypass and interface components close to their associated pins. Where the receiver operates near the limits of its supported sampling rate or clock ratio, verify timing margins and jitter tolerance in system-level testing rather than relying only on nominal resolution and frequency figures.

This page combines the verified AK4112BVM package and receiver information with practical application guidance, pinout and datasheet access guidance, design considerations, and qualified replacement analysis. It is intended to help engineers identify whether the AK4112BVM fits a four-channel, 24-bit digital-audio design before requesting a quotation or committing the part to a new PCB layout.

ドロップイン代替品: AK4112BVM — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。

この製品に利用可能なドロップイン代替品はありません。

代替品をリクエスト

AK4112BVM 仕様

Device Type Digital audio receiver
Audio Receiver Channel Count 4 channels
Bit Resolution 24 bit
Maximum Sampling Frequency 96 kHz
Manufacturer Function Designation DIR
パッケージ 28-SSOP
Total Pin Count 28 pins
実装タイプ Surface mount

AK4112BVM 28-ssop ピン配置ガイド

AK4112BVM (28-ssop パッケージ) のピン配置。 ピン番号、機能、接続図はメーカーのデータシートで定義されています。正確なフットプリントとはんだ付けのガイドラインについては、データシートを参照してください。

AK4112BVM の 28-ssop パッケージピン配置図

詳細なピン配置データはありません: AK4112BVM.

詳細は データシート をご参照ください。

主な用途

AK4112BVM の用途: 6 件s: Home-Theater Digital Audio Receiver, Surround-Sound Audio Processor, Broadcast Audio Monitoring, Professional Digital Audio Interface, Digital Audio Recording Equipment, Multi-Zone Digital Audio System.

🎧

Home-Theater Digital Audio Receiver

The AK4112BVM fits a multichannel home-theater front end that receives a four-channel PCM digital-audio stream and passes decoded channel data to an audio processor. Its four-channel receiver architecture avoids requiring four separate single-channel interface devices, while 24-bit operation up to 96 kHz accommodates high-resolution source formats. Place the receiver close to the digital source and processor interfaces, provide local bypass capacitance, and route clock and data lines with controlled impedance. The source format, channel mapping, and clock relationships must match the device requirements in the manufacturer datasheet before layout release.

🎧

Surround-Sound Audio Processor

A surround-sound processor can use the AK4112BVM to receive several synchronized digital-audio channels before decoding, mixing, or routing them. The four-channel DIR capability is useful when the design must reduce the number of receiver ICs on a crowded board. With support for 24-bit audio up to 96 kHz, the interface can accommodate high-resolution streams when the connected source and processor use compatible formats. Validate clock ratios, audio-frame timing, logic levels, and channel assignment against the manufacturer application circuit and electrical characteristics.

📺

Broadcast Audio Monitoring

The AK4112BVM can serve as the digital receive stage in broadcast monitoring equipment handling four channels of digital audio. Its 24-bit resolution and operation up to 96 kHz fit monitoring paths that preserve source word length and support professional sample rates. For a rack or studio implementation, keep the receiver close to the digital source connector and maintain short, referenced clock and data routes to limit susceptibility to timing distortion. Verify the exact supported format, synchronization behavior, and operating limits in the manufacturer documentation.

🎙️

Professional Digital Audio Interface

Professional recording and monitoring interfaces can use the AK4112BVM to consolidate four digital-audio channels in a dedicated receiver stage. Its 24-bit capability supports high-resolution digital streams up to 96 kHz, while the integrated four-channel architecture simplifies board partitioning. The implementation should isolate noisy analog and power sections from digital routing, provide low-impedance ground returns, and place required decoupling close to the receiver. System validation should cover clock stability, supported channel formats, and synchronization under sustained real-time audio traffic.

🖥️

Digital Audio Recording Equipment

The AK4112BVM is applicable to digital recording equipment that receives four encoded or PCM audio channels from an upstream source before storage or processing. Operation up to 96 kHz and 24-bit resolution permits high-resolution workflows when the source format is supported. A practical design should use a continuous ground plane, short clock traces, and carefully separated return paths for digital data and power distribution. Validate write-clock relationships and signal timing in the complete recording chain, because nominal resolution alone does not establish end-to-end timing margin.

🔊

Multi-Zone Digital Audio System

A multi-zone audio system can employ the AK4112BVM where four digital channels must be received centrally and distributed to zone-processing logic. The four-channel receiver architecture provides a compact way to handle several streams while retaining 24-bit word length and support for operation up to 96 kHz. Place the device according to the manufacturer's reference layout, maintain matched clock distribution, and use local bypass capacitors at the supply pins. Confirm channel assignment, frame synchronization, and supported digital-audio modes before treating the receiver as interchangeable with a generic multichannel interface.

What is the AK4112BVM?
The AK4112BVM is a four-channel, 24-bit digital audio receiver from Asahi Kasei Microdevices, with operation up to 96 kHz in a 28-SSOP package. According to the manufacturer datasheet, it implements the AK4112B digital audio receiver function and is intended for systems that receive multiple channels of digital PCM audio. Its combination of four channels, 24-bit resolution, and a maximum sampling frequency of 96 kHz makes it suitable for consumer, broadcast, and professional digital-audio equipment.
What are the key specifications of AK4112BVM that engineers should know?
The AK4112BVM provides four audio-receiver channels, 24-bit resolution, operation up to 96 kHz, and a 28-SSOP package. According to the manufacturer datasheet, its primary architecture is a digital audio receiver, or DIR. These parameters position the device for multi-channel PCM audio systems where several channels must be received through one integrated component. Supply voltage, supported digital formats, clock requirements, and detailed timing values should be confirmed from the datasheet before schematic release.
Where can I download the AK4112BVM datasheet PDF?
The AK4112BVM datasheet PDF is accessible through the AKM datasheet listing at the datasheet URL on this page. The document identifies the device as a four-channel, 24-bit digital audio receiver supporting operation up to 96 kHz. Use the pin-description table, electrical characteristics, clocking section, and typical application circuit when designing the PCB. The document number and page count should be taken directly from the downloaded manufacturer file rather than inferred from the listing.
Where can I find the AK4112BVM pinout?
The AK4112BVM pinout is documented in the pin-description table of the manufacturer datasheet. The verified package configuration is 28-SSOP, so the physical device has 28 numbered terminals. Assign signal names and electrical roles directly from the datasheet, including power, ground, clock, data, and control terminals. Use the package drawing and pin-description table together to preserve the manufacturer's numbering convention and avoid reversing a pin during footprint design.
What is the difference between AK4112BVM and AK4112BVF?
The AK4112BVM and AK4112BVF use different verified package descriptions: AK4112BVM is listed as 28-SSOP, while AK4112BVF is listed as 28-VSOP. Both are associated with the AK4112B 24-bit, 96 kHz digital-audio-receiver family, but that shared function does not make the package suffix change a confirmed drop-in replacement. Because AK4112BVF is not presented as having the same physical package, use its datasheet and land-pattern dimensions before considering it for an existing AK4112BVM PCB.
When should I choose AK4112BVM instead of AK4112BVF?
Choose the AK4112BVM when the required PCB footprint is explicitly based on the 28-SSOP AK4112BVM package and the design needs the family's four-channel, 24-bit receiver capability up to 96 kHz. Choose AK4112BVF only when its 28-VSOP package and device-specific electrical requirements suit the target board. Because the verified package descriptions differ, the decision should be based on footprint compatibility and the applicable datasheet rather than the common AK4112B family name alone.
Is the AK4112BVM suitable for surround-sound receivers?
The AK4112BVM is suitable for surround-sound receiver designs that require four-channel digital-audio reception at up to 24-bit resolution and 96 kHz sampling. Its four-channel DIR architecture can consolidate multiple digital-audio inputs into one receiver IC. Actual implementation still depends on the supported digital format, channel mapping, clocking, and electrical specifications in the manufacturer datasheet. Verify those requirements against the source format of the selected AV receiver or digital-audio processor.
Can AK4112BVM replace a generic four-channel digital audio receiver?
The AK4112BVM can be considered only when the replacement receiver has the same 28-SSOP footprint, equivalent pin functions, compatible digital-audio formats, and acceptable operating conditions. Its four-channel, 24-bit operation up to 96 kHz establishes functional relevance, but channel count and resolution alone do not prove pin compatibility. Compare the complete pin-description table, clocking architecture, logic levels, supply requirements, and timing parameters of both devices before approving a substitution.
What is the best drop-in replacement for AK4112BVM?
No confirmed drop-in replacement for the AK4112BVM is identified by the available cross-reference results. The AK4112BVF is a related AK4112B-family device, but its verified package is 28-VSOP rather than the AK4112BVM's 28-SSOP, so it cannot be classified as a same-footprint replacement. Treat any proposed substitute as a new engineering review until its land pattern, pin functions, supply voltage, clock requirements, and digital-audio formats are verified.
What can replace AK4112BVM on the same PCB?
The AK4112BVM has no confirmed same-PCB replacement in the available cross-reference results. A same-PCB candidate must match the 28-SSOP footprint and preserve pin-to-pin behavior, including digital inputs, control signals, clocks, supplies, and grounding. The related AK4112BVF is listed in a 28-VSOP package and therefore is not established as a same-PCB replacement. Use the manufacturer cross-reference resources or request engineering assistance for a component-level review.
Where can I buy AK4112BVM online?
Use the Request a Quote form on this page to request AK4112BVM availability, current commercial terms, and suitable order quantities from XAIPART. The part is a cataloged 28-SSOP, four-channel, 24-bit digital audio receiver, so a quotation can be matched against the required package and device function. Confirm lifecycle status, lead time, and minimum order quantity when the quotation is returned.
What is the lead time for AK4112BVM?
The current AK4112BVM lead time should be requested through the Request a Quote form on this page. Lead time can vary with order quantity, inventory position, and the exact package suffix, so a general availability statement would not be reliable. When requesting a quotation, identify the required AK4112BVM package, target quantity, production schedule, and whether inspection or traceability documentation is needed.
Is AK4112BVM currently in stock?
Current AK4112BVM stock should be confirmed through the Request a Quote form on this page rather than inferred from a general catalog listing. The verified product identity is the four-channel, 24-bit digital audio receiver in a 28-SSOP package, with operation up to 96 kHz. The quotation response should state current availability and lead time for the requested quantity, allowing the buyer to confirm both technical suitability and procurement timing.
How much does AK4112BVM cost?
Submit the required quantity through the Request a Quote form on this page to obtain the current AK4112BVM commercial terms. The quotation should reflect the exact 28-SSOP device, order quantity, and requested delivery schedule. Engineers should also validate lifecycle status and supply conditions as part of the sourcing review so that price and lead time are considered together rather than independently.
What are the design considerations for an AK4112BVM audio receiver board?
The principal AK4112BVM design consideration is preserving clean, correctly timed digital-audio signals. Place required bypass capacitors close to their pins, maintain a continuous ground reference, route clock and data traces with controlled impedance, and avoid long stubs or unnecessary loop area. According to the manufacturer datasheet, the device supports 24-bit audio up to 96 kHz, so the system clock and source timing must be validated under worst-case conditions before releasing the layout.

エンジニアリング参考データ: AK4112BVM — 比較、設計ガイダンス、コンプライアンス情報。

選定ガイド

Choose the AK4112BVM when the design requires a four-channel, 24-bit digital audio receiver operating up to 96 kHz and the PCB is built around its 28-SSOP package. It is appropriate for home-theater receivers, surround-sound processors, broadcast monitoring, recording equipment, and multi-zone audio systems that receive compatible PCM streams. The related AK4112BVF is not a confirmed drop-in option because its verified package is 28-VSOP. If no qualified same-footprint substitute is available, use the AK4112BVM datasheet to finalize the footprint, clocking, format support, and bypass arrangement before release. This approach minimizes the risk of assuming that common family naming, channel count, and resolution guarantee physical and electrical interchangeability.

代替品との比較

パラメータ この製品
Package 28-SSOP
Brand Asahi Kasei Microdevices
Device Type Digital audio receiver
Audio Receiver Channels 4 channels
Bit Resolution 24 bit
Maximum Sampling Frequency 96 kHz
Total Pin Count 28 pins
Mounting Type Surface mount

主な差別化要因

  • Four-channel digital-audio receiver integration (vs AK4112BVF)
  • Explicit 28-SSOP package identity (vs AK4112BVF)
  • Compact multi-channel receiver function (vs Single-channel audio receiver implementations)

設計ノート

Treat the digital-audio clock and data paths as a matched high-speed interface even though the AK4112BVM operates below many conventional digital-interface rates. Route clock and data with consistent geometry and a continuous ground reference, minimize stubs, and keep the receiver close to the source or processing device. The 96 kHz operating capability makes clean timing important, while the 24-bit format can increase timing margin requirements compared with lower-word-length interfaces.

Place all required bypass capacitors at the nearest appropriate supply and ground pins, using the values and topology specified by the manufacturer. Keep the digital return current continuous through the ground plane and avoid routing clock and data over splits in that plane. Establish the actual supply operating range from the manufacturer datasheet before adding regulators or level-shifting circuitry; those requirements cannot be inferred solely from the AK4112B family description.

Do not substitute a related AK4112B-family device solely because it has the same channel count, resolution, or maximum sample rate. The AK4112BVF is identified with a different 28-VSOP package, so it is not an established drop-in choice for a 28-SSOP AK4112BVM footprint. Before replacing any part, compare every numbered pin, supported input format, clock input, control signal, supply condition, and timing parameter in the two manufacturer datasheets.

コンプライアンス情報

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
鉛フリー
Unknown
ハロゲンフリー
Unknown
紛争鉱物
Unknown

No definitive compliance declarations for AK4112BVM were identified in the product information. Confirm RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status using the manufacturer declaration or the exact ordering code.

データ検証日: 2026-11-16 — データはXAIPARTの部品エンジニアリングチームによって検証・管理されています

関連検索

AK4112BVM AK4112BVM datasheet AK4112BVM datasheet pdf AK4112BVM pinout AK4112BVM specifications AK4112BVM equivalent AK4112BVM replacement AK4112BVM cross reference AK4112BVM 28-SSOP footprint AK4112BVM 96kHz 24-bit receiver AK4112BVM price AK4112BVM stock and lead time

関連部品&用語

Asahi Kasei Microdevices AK4112BVM AK4112B AK4112BVF digital audio receiver DIR four-channel audio receiver 24-bit audio 96 kHz sampling PCM digital audio audio interface IC digital signal processing surface-mount IC 28-SSOP package home-theater receiver surround-sound processor broadcast monitoring professional audio interface digital audio recording multi-zone audio clock jitter digital audio clock bypass capacitor continuous ground plane RoHS REACH AEC-Q100
クイック見積RFQ
詳細をすべてご記入ください — 営業チームが24時間以内にご返信いたします
部品番号 メーカー パッケージ QTY 目標価格 小計
✓
見積を送信しました!

24時間以内にメールでご返信いたします

1
RFQ送信済み
2
見積受領
3
注文済み
4
お支払い
5
発送済み
6
配達済み
RFQの詳細を表示