AK4112BVM - 24-Bit 4-Channel Audio Receiver | AKM
MPN: AK4112BVM ✓ AktifAK4112BVM Ringkasan
A digital audio receiver, abbreviated DIR, converts a serial digital audio stream into the internal PCM representation used by audio processing, storage, and playback systems. Within the broader semiconductor hierarchy, the AK4112BVM belongs to the audio interface IC category, with the DIR function providing a bridge between external digital-audio transports and downstream digital signal processing. Its four-channel architecture allows multiple synchronized audio channels to be handled by one receiver rather than through separate single-channel devices.
The AK4112BVM supports 24-bit audio processing and sampling frequencies up to 96 kHz. These figures define the principal signal-fidelity and bandwidth requirements of the receiver. The four-channel capability is particularly useful in surround-sound and multi-zone audio equipment, where several channels must share a common device. As a dedicated audio interface IC, the part can simplify clocking and channel management compared with implementing equivalent receiver functions in programmable logic or a general-purpose processor.
The AK4112BVM integrates digital audio reception with the AK4112B function set in a compact 28-SSOP package. The package gives an equipment designer a traditional surface-mount implementation with a 28-pin lead arrangement. Because digital audio receivers depend on stable clocking and correctly matched input timing, power-supply sequencing, grounding, and signal routing remain as important as the nominal sample-rate capability. The receiver should be placed according to the manufacturer's pin-description and application-circuit guidance rather than treated as a generic logic IC.
Typical applications include digital audio equipment, home-theater and surround-sound processors, broadcast and professional audio equipment, recording-system interfaces, and other products receiving multiple channels of PCM digital audio. At 96 kHz and 24-bit resolution, the device addresses high-resolution audio use cases while retaining the relatively compact package and integrated four-channel receiver architecture. The exact clock requirements, supported digital-audio formats, and signal-level details should be confirmed in the manufacturer datasheet before finalizing a system design.
A key design consideration is the relationship between the digital-audio source, the receiver clock, and downstream logic. Route the digital input with controlled impedance, keep return paths continuous, and place required bypass and interface components close to their associated pins. Where the receiver operates near the limits of its supported sampling rate or clock ratio, verify timing margins and jitter tolerance in system-level testing rather than relying only on nominal resolution and frequency figures.
This page combines the verified AK4112BVM package and receiver information with practical application guidance, pinout and datasheet access guidance, design considerations, and qualified replacement analysis. It is intended to help engineers identify whether the AK4112BVM fits a four-channel, 24-bit digital-audio design before requesting a quotation or committing the part to a new PCB layout.
Pilihan pengganti yang segera untuk AK4112BVM — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.
Tiada pilihan pengganti yang segera untuk produk ini.
Minta AlternatifAK4112BVM Spesifikasi
| Device Type | Digital audio receiver |
| Audio Receiver Channel Count | 4 channels |
| Bit Resolution | 24 bit |
| Maximum Sampling Frequency | 96 kHz |
| Manufacturer Function Designation | DIR |
| Kemasan | 28-SSOP |
| Total Pin Count | 28 pins |
| Jenis Pemasangan | Surface mount |
Panduan Konfigurasi Pin AK4112BVM 28-ssop
Konfigurasi pin untuk AK4112BVM (28-ssop pakai). Penomeran pin, fungsi, dan garis bentuk koneksi ditakrifkan dalam dokumen pengeluar. Rujuk dokumen untuk kebentuk dan pedoman pengasman.
Tiada data garisan pin yang diperoleh untuk AK4112BVM.
Rujuk kepada lembaran data untuk konfigurasi pin penuh.
Aplikasi Biasa
AK4112BVM patut untuk 6 aplikasis: Home-Theater Digital Audio Receiver, Surround-Sound Audio Processor, Broadcast Audio Monitoring, Professional Digital Audio Interface, Digital Audio Recording Equipment, Multi-Zone Digital Audio System.
Home-Theater Digital Audio Receiver
The AK4112BVM fits a multichannel home-theater front end that receives a four-channel PCM digital-audio stream and passes decoded channel data to an audio processor. Its four-channel receiver architecture avoids requiring four separate single-channel interface devices, while 24-bit operation up to 96 kHz accommodates high-resolution source formats. Place the receiver close to the digital source and processor interfaces, provide local bypass capacitance, and route clock and data lines with controlled impedance. The source format, channel mapping, and clock relationships must match the device requirements in the manufacturer datasheet before layout release.
Surround-Sound Audio Processor
A surround-sound processor can use the AK4112BVM to receive several synchronized digital-audio channels before decoding, mixing, or routing them. The four-channel DIR capability is useful when the design must reduce the number of receiver ICs on a crowded board. With support for 24-bit audio up to 96 kHz, the interface can accommodate high-resolution streams when the connected source and processor use compatible formats. Validate clock ratios, audio-frame timing, logic levels, and channel assignment against the manufacturer application circuit and electrical characteristics.
Broadcast Audio Monitoring
The AK4112BVM can serve as the digital receive stage in broadcast monitoring equipment handling four channels of digital audio. Its 24-bit resolution and operation up to 96 kHz fit monitoring paths that preserve source word length and support professional sample rates. For a rack or studio implementation, keep the receiver close to the digital source connector and maintain short, referenced clock and data routes to limit susceptibility to timing distortion. Verify the exact supported format, synchronization behavior, and operating limits in the manufacturer documentation.
Professional Digital Audio Interface
Professional recording and monitoring interfaces can use the AK4112BVM to consolidate four digital-audio channels in a dedicated receiver stage. Its 24-bit capability supports high-resolution digital streams up to 96 kHz, while the integrated four-channel architecture simplifies board partitioning. The implementation should isolate noisy analog and power sections from digital routing, provide low-impedance ground returns, and place required decoupling close to the receiver. System validation should cover clock stability, supported channel formats, and synchronization under sustained real-time audio traffic.
Digital Audio Recording Equipment
The AK4112BVM is applicable to digital recording equipment that receives four encoded or PCM audio channels from an upstream source before storage or processing. Operation up to 96 kHz and 24-bit resolution permits high-resolution workflows when the source format is supported. A practical design should use a continuous ground plane, short clock traces, and carefully separated return paths for digital data and power distribution. Validate write-clock relationships and signal timing in the complete recording chain, because nominal resolution alone does not establish end-to-end timing margin.
Multi-Zone Digital Audio System
A multi-zone audio system can employ the AK4112BVM where four digital channels must be received centrally and distributed to zone-processing logic. The four-channel receiver architecture provides a compact way to handle several streams while retaining 24-bit word length and support for operation up to 96 kHz. Place the device according to the manufacturer's reference layout, maintain matched clock distribution, and use local bypass capacitors at the supply pins. Confirm channel assignment, frame synchronization, and supported digital-audio modes before treating the receiver as interchangeable with a generic multichannel interface.
Data referensi kejuruteraan untuk AK4112BVM — perbandingan, panduan rancangan, dan maklumat kesediaan
Panduan Pilihan
Perbandingan dengan Gantian
| Parametr | Produk Ini |
|---|---|
| Package | 28-SSOP |
| Brand | Asahi Kasei Microdevices |
| Device Type | Digital audio receiver |
| Audio Receiver Channels | 4 channels |
| Bit Resolution | 24 bit |
| Maximum Sampling Frequency | 96 kHz |
| Total Pin Count | 28 pins |
| Mounting Type | Surface mount |
Penyeberangsung Jelas
- Four-channel digital-audio receiver integration (vsAK4112BVF)
- Explicit 28-SSOP package identity (vsAK4112BVF)
- Compact multi-channel receiver function (vsSingle-channel audio receiver implementations)
Catatan Desain
Treat the digital-audio clock and data paths as a matched high-speed interface even though the AK4112BVM operates below many conventional digital-interface rates. Route clock and data with consistent geometry and a continuous ground reference, minimize stubs, and keep the receiver close to the source or processing device. The 96 kHz operating capability makes clean timing important, while the 24-bit format can increase timing margin requirements compared with lower-word-length interfaces.
Place all required bypass capacitors at the nearest appropriate supply and ground pins, using the values and topology specified by the manufacturer. Keep the digital return current continuous through the ground plane and avoid routing clock and data over splits in that plane. Establish the actual supply operating range from the manufacturer datasheet before adding regulators or level-shifting circuitry; those requirements cannot be inferred solely from the AK4112B family description.
Do not substitute a related AK4112B-family device solely because it has the same channel count, resolution, or maximum sample rate. The AK4112BVF is identified with a different 28-VSOP package, so it is not an established drop-in choice for a 28-SSOP AK4112BVM footprint. Before replacing any part, compare every numbered pin, supported input format, clock input, control signal, supply condition, and timing parameter in the two manufacturer datasheets.
Maklumat Kesediaan
No definitive compliance declarations for AK4112BVM were identified in the product information. Confirm RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status using the manufacturer declaration or the exact ordering code.