AK4492ECB - 32-Bit 2ch Audio DAC | AKM Semiconductor
部品番号: AK4492ECB ✓ 生産中AK4492ECB 概要
A DAC is a digital-to-analog converter, a mixed-signal semiconductor that converts encoded digital samples into continuous analog voltage signals. Within the signal path, a digital audio source connects to the DAC, and the DAC reconstructs an analog output suitable for downstream headphone, line, amplifier, or speaker circuitry. In the broader electronics hierarchy, the AK4492ECB belongs to the ADC/DAC class of integrated circuits and ultimately to the mixed-signal semiconductor category.
The AK4492ECB is identified as a quality-oriented, 32-bit, two-channel DAC. Its principal documented characteristics include 32-bit digital audio resolution, support for DSD and PCM data, a 96-WLCSP package, and a body size of 5.64 mm by 5.64 mm. These features make the part relevant to compact premium audio equipment, digital transport systems, and other applications requiring a dedicated stereo DAC stage.
The manufacturer describes the AK4492 family as a high-performance audio DAC family. The AK4492ECB ordering code identifies the specific package and configuration intended for implementation on a compact printed circuit board. Because this package exposes a large number of connections in a small area, its success depends on careful escape routing, short signal paths, clean partitioning of analog and digital supplies, and PCB construction capable of supporting fine-pitch assembly.
Typical application areas include high-resolution network players, USB and digital audio interface products, home-audio preamplifiers, headphone amplifiers, compact CD players, and multi-zone audio equipment. In each case, the DAC can serve as the final digital-to-analog conversion stage before an analog gain and output-amplifier section. System design must still account for the supported interface, clocking, output configuration, decoupling, and analog-output requirements stated in the manufacturer datasheet.
The main layout consideration is the 96-WLCSP footprint. Place the DAC close to the digital interface and analog output routing to minimize trace length and simplify return paths. Separate noisy digital, clock, and power-switching activity from the analog output region. Use a stable low-noise reference and suitable power-network filtering, and route output channels as a matched pair to preserve channel-to-channel consistency.
This page organizes the confirmed AK4492ECB package information, digital-audio format support, sourcing data, application guidance, and engineering design considerations. It also distinguishes verified drop-in replacements from merely similar converters, helping engineers avoid assuming that a same-function audio DAC can replace a 96-WLCSP device without package, pin, interface, and clock verification.
ドロップイン代替品: AK4492ECB — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
この製品に利用可能なドロップイン代替品はありません。
代替品をリクエストAK4492ECB 最大定格&電気的特性
| Device Type | Stereo audio digital-to-analog converter |
| 分解能 | 32 bit |
| Channel Count | 2 channels |
| Supported Audio Formats | DSD and PCM |
| Product Description | Quality Oriented 32-Bit 2ch DAC |
| Package Type | 96-WLCSP |
| Package Designation | 96-UFBGA |
| Package Length | 5.64 mm |
| Package Width | 5.64 mm |
| ピン数 | 96 pins |
| 実装タイプ | Surface mount |
| RoHS ステータス | unknown |
| REACH Status | unknown |
| AEC-Q100 Qualification | not_applicable |
AK4492ECB 5.64 mm ピン配置ガイド
AK4492ECB (5.64 mm パッケージ) のピン配置。 このアナログコンポーネントは、入力、出力、および電源ピンを備えています。オフセットナル、補償、イネーブルピンの設定については、メーカーのデータシートを参照してください。信号調整やアンプ回路に最適です。
詳細なピン配置データはありません: AK4492ECB.
詳細は データシート をご参照ください。
主な用途
AK4492ECB の用途: 6 件s: High-Resolution Network Audio Player, USB Digital Audio Interface, Premium Headphone Amplifier, Home-Audio Preamplifier, Digital Music Player, Professional Digital Audio Monitor.
High-Resolution Network Audio Player
The AK4492ECB fits the final conversion stage of a high-resolution network audio player because it combines 32-bit resolution with two-channel DSD and PCM support. The player’s transport or network-audio subsystem can deliver compatible digital data to the DAC, after which the analog outputs feed a line-level or headphone amplification stage. Its 96-WLCSP package measures 5.64 mm by 5.64 mm, supporting dense layouts without expanding into a large through-hole footprint. Board implementation should preserve short digital and analog routes, provide a clean clock source, and follow the manufacturer reference circuit for decoupling, output configuration, and ground partitioning.
おすすめ
USB Digital Audio Interface
The AK4492ECB can serve as the stereo analog-output stage in a USB digital audio interface when the USB controller supplies a compatible PCM or DSD stream. Its 32-bit, two-channel architecture matches conventional stereo playback, while DSD support is useful for designs intended to accept high-resolution direct-stream audio. The 96-WLCSP package occupies only 5.64 mm by 5.64 mm, helping conserve board area beside the USB interface circuitry. The design must confirm supported digital formats, master-clock generation, channel timing, output mode, and power sequencing using the AK4492ECB manufacturer documentation before PCB signoff.
おすすめ
Premium Headphone Amplifier
The AK4492ECB is appropriate for a premium headphone amplifier that requires a dedicated high-resolution stereo conversion stage. Digital source data is decoded into analog signals by the 32-bit, two-channel DAC, and those outputs can drive a balanced or discrete analog amplification section according to the supported output configuration. DSD and PCM support broadens compatibility with modern source components. The compact 96-WLCSP package measures 5.64 mm by 5.64 mm, but that density requires controlled return paths and careful separation between digital, clock, and analog domains. Verify output loading and the complete recommended circuit before implementation.
おすすめ
Home-Audio Preamplifier
The AK4492ECB supports the digital-to-analog conversion function in a home-audio preamplifier handling two-channel PCM or DSD material. Its 32-bit resolution and dedicated stereo DAC architecture are appropriate when the product needs a dedicated conversion stage between digital source control and analog line-level amplification. The 96-WLCSP package can simplify density-oriented front-panel and compact chassis designs because the body measures 5.64 mm by 5.64 mm. Implementation should preserve matched analog channel routing, stable clocking, and quiet supply references, while following the manufacturer’s output and bypass configuration. Sample-rate limits and digital-interface timing must be taken directly from the datasheet.
おすすめ
Digital Music Player
The AK4492ECB can act as the stereo DAC inside a compact digital music player designed for PCM playback or direct-stream formats. The player’s decoder and transport provide compatible digital audio to the 32-bit, two-channel converter, which then produces the analog signal for the output amplifier. Its 96-WLCSP package measures 5.64 mm by 5.64 mm, making it useful in portable and space-constrained enclosures where connector and battery circuitry leave limited PCB area. Because the package has 96 terminals in a small body, assembly capability, land-pattern tolerance, and fine-pitch inspection requirements need confirmation. Power, clock, and analog routing should follow the manufacturer reference design.
おすすめ
Professional Digital Audio Monitor
The AK4492ECB is suitable for a professional digital audio monitor that receives stereo PCM or DSD and requires a dedicated conversion stage before balanced or discrete output amplification. The part’s confirmed 32-bit resolution and two-channel organization match professional stereo monitoring requirements, while its compact 96-WLCSP package supports dense front-end boards. The implementation should provide the required master clock, maintain low-jitter distribution, and keep converter outputs away from switching and high-current amplifier stages. Output topology, digital format support, sample-rate limits, and channel timing must be checked against the manufacturer datasheet before selecting a definitive circuit and PCB footprint.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: AK4492ECB — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 |
|---|---|
| Package | 96-WLCSP, 5.64 mm x 5.64 mm |
| Brand | AKM Semiconductor |
| Device Type | Stereo audio DAC |
| Resolution | 32 bit |
| Channel Count | 2 channels |
| Supported Formats | DSD and PCM |
| Pin Count | 96 pins |
| Mounting Type | Surface mount |
主な差別化要因
- Confirmed 32-bit stereo conversion with DSD support (vs No verified drop-in alternative MPN)
- Compact 96-terminal package (vs No verified drop-in alternative MPN)
- Purpose-built stereo DAC configuration (vs No verified drop-in alternative MPN)
設計ノート
Treat the 96-WLCSP as a fine-pitch assembly and confirm that the PCB manufacturer supports the required land pattern, solder-mask definition, paste stencil, and inspection process. Keep the DAC close to the digital interface and analog output routing to minimize trace length. Place the input, output, reference, and decoupling connections according to the manufacturer reference circuit rather than rearranging them for visual convenience.
Partition the board into digital-interface, clock, analog-output, and power-return regions. Route the two analog outputs as a matched pair and keep switching-regulator currents, high-speed clocks, and digital return paths away from sensitive output traces. Use a continuous ground reference under and around the device where the package and board stack-up permit, and verify the final return-current paths with the complete PCB stack-up.
Do not substitute a generic stereo DAC solely because it also supports 32-bit audio. The AK4492ECB uses a 96-WLCSP package, and replacement requires exact confirmation of land pattern, pin mapping, digital interface, clocking, supported DSD and PCM modes, analog output configuration, power rails, and reset or sequencing behavior. A different package or interface requires a PCB redesign rather than a component substitution.
コンプライアンス情報
No explicit RoHS, REACH, lead-free, halogen-free, or conflict-minerals declarations were established for the exact AK4492ECB ordering code. AEC-Q100 is not applicable because this is a consumer and professional audio DAC rather than an automotive-qualified device.