AKM Semiconductor

AK4492ECB - 32-Bit 2ch Audio DAC | AKM Semiconductor

MPN: AK4492ECB ✓ Aktif
96-WLCSP Package
MOQ: 1 |

AK4492ECB Ringkasan

AKM Semiconductor AK4492ECB is a 32-bit, 2-channel audio digital-to-analog converter supporting DSD and PCM formats, packaged in a 96-pin WLCSP measuring 5.64 mm by 5.64 mm. The device is designed for high-resolution audio systems where a compact, multichannel conversion stage must process digital audio into analog output signals. Its two-channel architecture supports balanced or discrete stereo signal-chain implementations, subject to the circuit architecture specified in the manufacturer datasheet.

A DAC is a digital-to-analog converter, a mixed-signal semiconductor that converts encoded digital samples into continuous analog voltage signals. Within the signal path, a digital audio source connects to the DAC, and the DAC reconstructs an analog output suitable for downstream headphone, line, amplifier, or speaker circuitry. In the broader electronics hierarchy, the AK4492ECB belongs to the ADC/DAC class of integrated circuits and ultimately to the mixed-signal semiconductor category.

The AK4492ECB is identified as a quality-oriented, 32-bit, two-channel DAC. Its principal documented characteristics include 32-bit digital audio resolution, support for DSD and PCM data, a 96-WLCSP package, and a body size of 5.64 mm by 5.64 mm. These features make the part relevant to compact premium audio equipment, digital transport systems, and other applications requiring a dedicated stereo DAC stage.

The manufacturer describes the AK4492 family as a high-performance audio DAC family. The AK4492ECB ordering code identifies the specific package and configuration intended for implementation on a compact printed circuit board. Because this package exposes a large number of connections in a small area, its success depends on careful escape routing, short signal paths, clean partitioning of analog and digital supplies, and PCB construction capable of supporting fine-pitch assembly.

Typical application areas include high-resolution network players, USB and digital audio interface products, home-audio preamplifiers, headphone amplifiers, compact CD players, and multi-zone audio equipment. In each case, the DAC can serve as the final digital-to-analog conversion stage before an analog gain and output-amplifier section. System design must still account for the supported interface, clocking, output configuration, decoupling, and analog-output requirements stated in the manufacturer datasheet.

The main layout consideration is the 96-WLCSP footprint. Place the DAC close to the digital interface and analog output routing to minimize trace length and simplify return paths. Separate noisy digital, clock, and power-switching activity from the analog output region. Use a stable low-noise reference and suitable power-network filtering, and route output channels as a matched pair to preserve channel-to-channel consistency.

This page organizes the confirmed AK4492ECB package information, digital-audio format support, sourcing data, application guidance, and engineering design considerations. It also distinguishes verified drop-in replacements from merely similar converters, helping engineers avoid assuming that a same-function audio DAC can replace a 96-WLCSP device without package, pin, interface, and clock verification.

Pilihan pengganti yang segera untuk AK4492ECB — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.

Tiada pilihan pengganti yang segera untuk produk ini.

Minta Alternatif

AK4492ECB Penilaian maksimum & Ciri-ciri Elektrik

Device Type Stereo audio digital-to-analog converter
Pemecahkatan 32 bit
Channel Count 2 channels
Supported Audio Formats DSD and PCM
Product Description Quality Oriented 32-Bit 2ch DAC
Package Type 96-WLCSP
Package Designation 96-UFBGA
Package Length 5.64 mm
Package Width 5.64 mm
Kiraan Pin 96 pins
Jenis Pemasangan Surface mount
Status RoHS unknown
REACH Status unknown
AEC-Q100 Qualification not_applicable

Panduan Konfigurasi Pin AK4492ECB 5.64 mm

Konfigurasi pin untuk AK4492ECB (5.64 mm pakai). Komponen analog ini mempunyai pin masukan, keluaran, dan kuasa. Rujuk dokumen pengeluar untuk konfigurasi pengecualian, pemulihan, dan pin aktifkan. Ideal untuk pengawasan isyarat dan litar pengukur.

Garis bentuk pengecah pakai 5.64 mm untuk AK4492ECB

Tiada data garisan pin yang diperoleh untuk AK4492ECB.

Rujuk kepada lembaran data untuk konfigurasi pin penuh.

Aplikasi Biasa

AK4492ECB patut untuk 6 aplikasis: High-Resolution Network Audio Player, USB Digital Audio Interface, Premium Headphone Amplifier, Home-Audio Preamplifier, Digital Music Player, Professional Digital Audio Monitor.

🌐

High-Resolution Network Audio Player

The AK4492ECB fits the final conversion stage of a high-resolution network audio player because it combines 32-bit resolution with two-channel DSD and PCM support. The player’s transport or network-audio subsystem can deliver compatible digital data to the DAC, after which the analog outputs feed a line-level or headphone amplification stage. Its 96-WLCSP package measures 5.64 mm by 5.64 mm, supporting dense layouts without expanding into a large through-hole footprint. Board implementation should preserve short digital and analog routes, provide a clean clock source, and follow the manufacturer reference circuit for decoupling, output configuration, and ground partitioning.

🔧

USB Digital Audio Interface

The AK4492ECB can serve as the stereo analog-output stage in a USB digital audio interface when the USB controller supplies a compatible PCM or DSD stream. Its 32-bit, two-channel architecture matches conventional stereo playback, while DSD support is useful for designs intended to accept high-resolution direct-stream audio. The 96-WLCSP package occupies only 5.64 mm by 5.64 mm, helping conserve board area beside the USB interface circuitry. The design must confirm supported digital formats, master-clock generation, channel timing, output mode, and power sequencing using the AK4492ECB manufacturer documentation before PCB signoff.

🎧

Premium Headphone Amplifier

The AK4492ECB is appropriate for a premium headphone amplifier that requires a dedicated high-resolution stereo conversion stage. Digital source data is decoded into analog signals by the 32-bit, two-channel DAC, and those outputs can drive a balanced or discrete analog amplification section according to the supported output configuration. DSD and PCM support broadens compatibility with modern source components. The compact 96-WLCSP package measures 5.64 mm by 5.64 mm, but that density requires controlled return paths and careful separation between digital, clock, and analog domains. Verify output loading and the complete recommended circuit before implementation.

🏠

Home-Audio Preamplifier

The AK4492ECB supports the digital-to-analog conversion function in a home-audio preamplifier handling two-channel PCM or DSD material. Its 32-bit resolution and dedicated stereo DAC architecture are appropriate when the product needs a dedicated conversion stage between digital source control and analog line-level amplification. The 96-WLCSP package can simplify density-oriented front-panel and compact chassis designs because the body measures 5.64 mm by 5.64 mm. Implementation should preserve matched analog channel routing, stable clocking, and quiet supply references, while following the manufacturer’s output and bypass configuration. Sample-rate limits and digital-interface timing must be taken directly from the datasheet.

📱

Digital Music Player

The AK4492ECB can act as the stereo DAC inside a compact digital music player designed for PCM playback or direct-stream formats. The player’s decoder and transport provide compatible digital audio to the 32-bit, two-channel converter, which then produces the analog signal for the output amplifier. Its 96-WLCSP package measures 5.64 mm by 5.64 mm, making it useful in portable and space-constrained enclosures where connector and battery circuitry leave limited PCB area. Because the package has 96 terminals in a small body, assembly capability, land-pattern tolerance, and fine-pitch inspection requirements need confirmation. Power, clock, and analog routing should follow the manufacturer reference design.

🎵

Professional Digital Audio Monitor

The AK4492ECB is suitable for a professional digital audio monitor that receives stereo PCM or DSD and requires a dedicated conversion stage before balanced or discrete output amplification. The part’s confirmed 32-bit resolution and two-channel organization match professional stereo monitoring requirements, while its compact 96-WLCSP package supports dense front-end boards. The implementation should provide the required master clock, maintain low-jitter distribution, and keep converter outputs away from switching and high-current amplifier stages. Output topology, digital format support, sample-rate limits, and channel timing must be checked against the manufacturer datasheet before selecting a definitive circuit and PCB footprint.

What is AK4492ECB?
The AK4492ECB is a 32-bit, 2-channel audio digital-to-analog converter from AKM Semiconductor. It supports DSD and PCM audio formats and is packaged in a 96-WLCSP measuring 5.64 mm by 5.64 mm. According to the manufacturer datasheet, the AK4492 family is positioned as a quality-oriented stereo DAC for high-resolution digital audio equipment.
Where can I download the AK4492ECB datasheet PDF?
The AK4492ECB datasheet PDF is available through the AKM datasheet listing at AllDatasheet, which identifies the document as 101 pages. The manufacturer datasheet should be used for the authoritative pin descriptions, electrical characteristics, digital interface modes, clock requirements, output configuration, recommended application circuit, and PCB land pattern. The manufacturer documentation is the controlling reference for board design.
Where can I find the AK4492ECB pinout?
The AK4492ECB pinout is defined in the manufacturer datasheet for its 96-WLCSP package. The package contains 96 terminals and measures 5.64 mm by 5.64 mm. Use the pin-description table and package drawing when assigning tracks, and consult the land-pattern section before laying out the board because exposed-ball, thermal, and signal-routing requirements can affect footprint interpretation.
What are the key specifications of AK4492ECB that engineers should know?
The key confirmed specifications are 32-bit resolution, two output channels, DSD and PCM format support, and a 96-WLCSP package measuring 5.64 mm by 5.64 mm. The manufacturer datasheet also describes the AK4492 as a quality-oriented stereo DAC. Maximum sample rate, dynamic range, signal-to-noise ratio, and operating temperature must be taken from the relevant AK4492 datasheet rather than inferred from the ordering code.
What audio applications are suitable for AK4492ECB?
The AK4492ECB is suitable for high-resolution stereo audio products that use DSD or PCM digital sources. Typical system positions include a network player, digital audio interface, CD player, headphone amplifier, and home-audio preamplifier. Its 32-bit, 2-channel architecture is specifically oriented toward stereo conversion, while its compact 96-WLCSP footprint favors dense PCB layouts.
What can replace AK4492ECB?
No pin-to-pin drop-in replacement for the AK4492ECB was confirmed by the available manufacturer and distributor records. A replacement must match the 96-WLCSP footprint, pin assignment, digital interface, clocking scheme, analog output architecture, and electrical characteristics. Functional stereo DACs with different packages or interfaces may provide similar capability, but they should not be treated as drop-in substitutes without a complete board-level review.
Is there a cross-brand equivalent for AK4492ECB?
No cross-brand drop-in equivalent was confirmed for the AK4492ECB. Equivalent functionality alone is insufficient because this device uses a 96-WLCSP package with a specific pin map and audio interface. A candidate should be considered only after its package drawing, digital timing specification, supported data format, clock requirements, analog outputs, and power architecture have been compared with the AK4492ECB manufacturer datasheet.
AK4492ECB vs CS4461-CZZ: which is better for a stereo DAC design?
The AK4492ECB is confirmed as a 32-bit, 2-channel DAC supporting DSD and PCM in a 96-WLCSP, whereas equivalent CS4461-CZZ electrical and package details are not established here. The AK4492ECB is therefore the documented choice when DSD support and the specified 96-WLCSP implementation are required. A comparative design should verify interface, clocking, output topology, and footprint before selecting the CS4461-CZZ.
AK4492ECB vs CS5526-BSZ: can the CS5526-BSZ replace it?
The CS5526-BSZ cannot be classified as a drop-in replacement for the AK4492ECB from the established package and interface information. The AK4492ECB is a 32-bit stereo DAC in a 96-WLCSP with DSD and PCM support. Because equivalent CS5526-BSZ pin mapping and land-pattern details are not confirmed, selection requires a direct comparison of the two manufacturer datasheets and likely a PCB redesign.
When should I choose AK4492ECB over another stereo DAC?
Choose the AK4492ECB when the design requires a confirmed 32-bit, two-channel DAC with DSD and PCM support in a 96-WLCSP footprint measuring 5.64 mm by 5.64 mm. It is also appropriate when the AK4492 family characteristics and manufacturer reference circuit have been evaluated. Alternatives may be preferable only when their complete interface, clock, output, and package requirements offer a better system-level fit.
Is AK4492ECB suitable for a high-resolution network audio player?
The AK4492ECB is architecturally suitable for a high-resolution stereo network player because it is a 32-bit, 2-channel DAC with DSD and PCM support. It can form the conversion stage after the player’s digital audio processing and transport circuitry. The final design must support the selected digital interface and clocking arrangement, provide clean supplies, and follow the manufacturer’s analog-output and layout guidance.
How should AK4492ECB be placed on a PCB?
Place the AK4492ECB close to its digital interface and analog output routing, and keep the 96-WLCSP footprint on a PCB assembly process capable of handling its fine-pitch construction. Separate clocks, switching regulators, and digital return currents from sensitive analog paths. The AK4492ECB measures only 5.64 mm by 5.64 mm, so short escape routes and carefully controlled return paths are particularly important.
How much power and thermal design is required for AK4492ECB?
Power and thermal requirements must be calculated from the exact AK4492ECB operating mode, supply voltages, output configuration, and loaded conditions listed in the manufacturer datasheet. The available verified specifications confirm the 32-bit, two-channel 96-WLCSP configuration but do not state a complete maximum power figure. Use the datasheet current and dissipation limits rather than estimating from package size alone.
Where can I buy AK4492ECB and what is its current lead time?
The AK4492ECB is currently listed as in stock by an authorized component distributor, but the requested quantity, production status, and delivery schedule should be confirmed for each order. Use the Request a Quote form on this page for current commercial availability, quantity breaks, and lead-time confirmation. The form provides a direct response without relying on static catalog data that may change.
What is the price of AK4492ECB?
Use the Request a Quote form on this page for the current AK4492ECB price, including any quantity discount and available package configuration. Pricing changes with order quantity, inventory, and market conditions, so a static figure should not be used for budgeting. The request form allows the exact AK4492ECB ordering code, desired quantity, and delivery requirements to be reviewed together.
Is AK4492ECB in stock?
A distributor listing identifies AK4492ECB as in stock, confirming current market availability at the time of that listing. Stock quantities can change rapidly, and a listing does not reserve inventory. Submit the required quantity through the Request a Quote form on this page for an allocation confirmation and current lead-time information for the exact 96-WLCSP device.

Data referensi kejuruteraan untuk AK4492ECB — perbandingan, panduan rancangan, dan maklumat kesediaan

Panduan Pilihan

Choose the AK4492ECB when the design specifically requires a 32-bit, two-channel DAC with DSD and PCM support in the confirmed 96-WLCSP package measuring 5.64 mm by 5.64 mm. It is particularly appropriate for compact high-resolution audio products whose digital interface, clocking, and output architecture can follow the manufacturer reference design. Do not choose a generic stereo DAC solely on resolution or format support: the package, pin map, timing, output topology, and power requirements must also align. No verified pin-to-pin drop-in replacement was identified, so any alternative evaluation should begin with the AK4492ECB datasheet and proceed to a complete comparison of the candidate’s footprint, digital interface, supported formats, clocking, analog outputs, and sequencing. For a new compact design, confirm fine-pitch PCB assembly capability before committing to the 96-WLCSP footprint.

Perbandingan dengan Gantian

Parametr Produk Ini
Package 96-WLCSP, 5.64 mm x 5.64 mm
Brand AKM Semiconductor
Device Type Stereo audio DAC
Resolution 32 bit
Channel Count 2 channels
Supported Formats DSD and PCM
Pin Count 96 pins
Mounting Type Surface mount

Penyeberangsung Jelas

  • Confirmed 32-bit stereo conversion with DSD support (vsNo verified drop-in alternative MPN)
  • Compact 96-terminal package (vsNo verified drop-in alternative MPN)
  • Purpose-built stereo DAC configuration (vsNo verified drop-in alternative MPN)

Catatan Desain

Treat the 96-WLCSP as a fine-pitch assembly and confirm that the PCB manufacturer supports the required land pattern, solder-mask definition, paste stencil, and inspection process. Keep the DAC close to the digital interface and analog output routing to minimize trace length. Place the input, output, reference, and decoupling connections according to the manufacturer reference circuit rather than rearranging them for visual convenience.

Partition the board into digital-interface, clock, analog-output, and power-return regions. Route the two analog outputs as a matched pair and keep switching-regulator currents, high-speed clocks, and digital return paths away from sensitive output traces. Use a continuous ground reference under and around the device where the package and board stack-up permit, and verify the final return-current paths with the complete PCB stack-up.

Do not substitute a generic stereo DAC solely because it also supports 32-bit audio. The AK4492ECB uses a 96-WLCSP package, and replacement requires exact confirmation of land pattern, pin mapping, digital interface, clocking, supported DSD and PCM modes, analog output configuration, power rails, and reset or sequencing behavior. A different package or interface requires a PCB redesign rather than a component substitution.

Maklumat Kesediaan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bosong logam timbal
Unknown
Bosong halogen
Unknown
Mineral konflik
Unknown

No explicit RoHS, REACH, lead-free, halogen-free, or conflict-minerals declarations were established for the exact AK4492ECB ordering code. AEC-Q100 is not applicable because this is a consumer and professional audio DAC rather than an automotive-qualified device.

Data disahkan pada: 2026-11-16 — data yang disahkan dan disusun semula oleh pasukan kejuruteraan komponen XAIPART

Pencarian Berhubungan

akm ak4492ecb AK4492ECB datasheet AK4492ECB datasheet pdf AK4492ECB pinout AK4492ECB 96-WLCSP AK4492ECB 32-bit DAC AK4492ECB DSD PCM AK4492ECB equivalent AK4492ECB replacement AK4492ECB price AK4492ECB stock AK4492ECB audio DAC AK4492ECB footprint AK4492ECB application circuit

Komponen dan Tanda berkaitan

AKM Semiconductor AK4492ECB AK4492 32-bit DAC 2-channel DAC stereo DAC digital-to-analog converter mixed-signal IC ADC/DAC DSD PCM 96-WLCSP 96-UFBGA WLCSP package family surface-mount package 5.64 mm package length 5.64 mm package width high-resolution audio network audio player USB digital audio interface headphone amplifier home-audio preamplifier digital music player professional audio monitor
RFRC Saring Pantas
Isikan butiran lengkap — pasukan jualan kami akan bertindak balas dalam masa 24 jam
Nombor Bahagian Pengeluar Pakej QTY Harga Target Lengkap
✓
Pesan diskon sudah disubmit!

Kami akan bertindak balas kepada emel anda dalam tempoh 24 jam

1
RFQ Diserahkan
2
kutipan Diterima
3
Order Dipesan
4
Pembayaran
5
Dihantar
6
Diantar
Lihat Perincian RFQ