AKM (Asahi Kasei Microdevices)

AK5358AET - 24-Bit Stereo ADC, 8-96kHz | AKM

部品番号: AK5358AET ✓ 生産中
16-pin TSSOP Package
MOQ: 1 |

AK5358AET 概要

The Asahi Kasei Microdevices AK5358AET is a stereo 24-bit audio analog-to-digital converter with a sampling-rate range of 8 kHz to 96 kHz, housed in a 16-pin TSSOP package. It is designed for consumer and professional audio systems that require conversion of left and right analog audio channels into a digital I2S stream.

An audio ADC is a mixed-signal semiconductor that converts continuous analog voltage signals into digital data for processing, storage, transmission, or playback. Its position in the signal chain is between the analog input section and the digital audio subsystem. Within the broader semiconductor hierarchy, the AK5358AET belongs to the ADC and DAC class of data-converter ICs, combining analog input circuitry, clocking, filtering, and a digital audio interface in one package.

The principal specifications distinguish the AK5358AET from lower-resolution or lower-rate converters. Its 24-bit resolution supports high numerical precision, while the 8 kHz minimum and 96 kHz maximum sampling rates cover voice-band through high-resolution audio acquisition. The integrated I2S interface provides a conventional digital connection for audio processors, and the stereo architecture reduces the number of separate converter packages required for a conventional two-channel signal path.

The converter uses Enhanced dual-bit delta-sigma technology. This architecture supports accurate conversion while integrating the analog and digital conversion functions into a compact mixed-signal IC. A delta-sigma ADC includes a modulator and digital decimation-filter functions rather than relying only on a conventional flash or successive-approximation conversion structure. The AK5358A device also includes power-down control and digital-filter reset behavior, with output availability occurring after the documented initialization sequence following operation.

Typical uses include consumer audio equipment, professional recording and playback systems, microphone preamp and line-input conversion, USB or network audio interfaces, and industrial monitoring systems that must capture stereo audio. The I2S interface is particularly useful when the converter is connected to a digital signal processor, audio codec, microcontroller, or dedicated USB audio controller.

A practical design must preserve clean analog grounding, short input routing, suitable input biasing, and stable clock and power connections. Follow the manufacturer datasheet for analog input, common-mode voltage, digital-interface mode, power-supply sequencing, and decoupling values. The datasheet also requires proper power-down and initialization handling so that valid output data is not interpreted before the converter has completed its startup sequence.

This product record combines the AK5358AET converter specifications, package and interface details, sourcing information, application guidance, and drop-in replacement analysis. It also distinguishes confirmed same-package candidates from products that merely perform a similar function, helping engineers avoid substitutions that require PCB or interface changes.

ドロップイン代替品: AK5358AET — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。

このシリーズのバリエーション

同一シリーズでドロップイン互換のモデル: AK5358AET (同一形状・フットプリント) — 相違点: Minimum Sampling Rate, Sampling Rate Range.

AKM (Asahi Kasei Microdevices)
Minimum Sampling Rate: 4 kHz
Sampling Rate Range: 4 kHz to 96 kHz
比較対象 AK5358AET →

この製品に利用可能なドロップイン代替品はありません。

代替品をリクエスト

AK5358AET 最大定格&電気的特性

Converter Type Stereo audio A/D converter
分解能 24 bit
Sampling Rate Range 8 kHz to 96 kHz
Minimum Sampling Rate 8 kHz
Maximum Sampling Rate 96 kHz
Conversion Architecture Enhanced dual-bit delta-sigma
Audio Channels 2 channels
Digital Audio Interface I2S
パッケージ 16-pin TSSOP
実装タイプ Surface mount
Target Audio Segment Consumer to professional audio systems
Power-Down Control PDN pin
Digital Filter Reset Performed when PDN is asserted low
Analog Initialization Initiated after power-down mode is exited
Output Data Readiness After 4129 LRCK cycles following initialization

AK5358AET 16-pin tssop ピン配置ガイド

AK5358AET (16-pin tssop パッケージ) のピン配置。 このアナログコンポーネントは、入力、出力、および電源ピンを備えています。オフセットナル、補償、イネーブルピンの設定については、メーカーのデータシートを参照してください。信号調整やアンプ回路に最適です。

AK5358AET の 16-pin tssop パッケージピン配置図

詳細なピン配置データはありません: AK5358AET.

詳細は データシート をご参照ください。

主な用途

AK5358AET の用途: 6 件s: Consumer Audio Equipment, Professional Audio Recording, USB Audio Interface, Microphone and Line-Input Conversion, Network and Communications Audio, Industrial Audio Monitoring.

🎧

Consumer Audio Equipment

The AK5358AET fits consumer audio equipment that needs compact stereo analog-to-digital conversion before digital playback, storage, or wireless transmission. Its 24-bit resolution provides a high numerical precision, while the 8 kHz-to-96 kHz range accommodates different operating modes within one converter. The I2S interface allows direct connection to an audio processor or digital signal processor. According to the manufacturer datasheet, the AK5358AET is intended for consumer through professional audio systems, making the 16-pin TSSOP suitable for space-conscious equipment with two analog input channels.

🎙️

Professional Audio Recording

The AK5358AET is applicable to professional audio recording equipment requiring two-channel conversion at rates up to 96 kHz. Its 24-bit stereo architecture supplies one converter for left and right channels, reducing analog routing compared with separate single-channel devices. The I2S interface provides a standard path into a digital signal processor or recording controller. According to the manufacturer datasheet, the converter is suitable for professional audio systems and uses Enhanced dual-bit delta-sigma technology. System-level noise, clock jitter, grounding, and input-conditioning requirements still determine the achievable recording quality.

🖥️

USB Audio Interface

The AK5358AET can form the stereo capture stage of a USB audio interface when the host controller accepts I2S audio. The converter supports sampling rates from 8 kHz to 96 kHz, allowing one design to cover speech, multimedia audio, and higher-rate capture modes. Its 24-bit data format and I2S output simplify the boundary between analog inputs and a digital USB audio engine. According to the manufacturer datasheet, output data becomes valid only after power-up initialization, so firmware must qualify the data-ready state rather than relying on bus timing alone.

🎤

Microphone and Line-Input Conversion

The AK5358AET can digitize left and right microphone or line-level outputs after the appropriate preamplifier and signal-conditioning stages. Its stereo 24-bit conversion avoids using two separate ADC packages in a conventional balanced-input or dual-source design, and the I2S interface carries the two channels to a digital audio engine. According to the manufacturer datasheet, it supports 8 kHz-to-96 kHz sampling for consumer and professional audio systems. Input bias, common-mode voltage, gain, anti-alias filtering, and grounding must be designed around the manufacturer application circuit.

🌐

Network and Communications Audio

The AK5358AET is suitable for network audio nodes, communication terminals, and voice-capture systems that convert stereo analog inputs before encoding or transmission. Its sampling range begins at 8 kHz for speech-oriented processing and extends to 96 kHz for higher-quality acquisition, while the 24-bit converter provides numerical headroom for gain control and digital filtering. The I2S output can feed a network audio processor or communications codec. According to the manufacturer datasheet, the device is designed for consumer through professional audio systems and requires correct startup sequencing before its output is used.

🏭

Industrial Audio Monitoring

The AK5358AET can support industrial monitoring systems that capture two analog audio channels for event recording, condition monitoring, or diagnostic analysis. The 8 kHz-to-96 kHz range allows the sampling mode to follow the signal bandwidth, and the 24-bit stereo output preserves fine amplitude information for downstream processing. Its I2S interface connects to an embedded processor, digital signal processor, or industrial controller. According to the manufacturer datasheet, the converter supports consumer and professional audio systems; industrial deployments should also verify environmental limits, grounding, isolation, and electromagnetic requirements.

What is the AK5358AET?
The AK5358AET is a stereo 24-bit audio analog-to-digital converter from Asahi Kasei Microdevices. According to the manufacturer datasheet, it converts two analog audio channels into digital data through an I2S interface, supports sampling rates from 8 kHz to 96 kHz, and uses Enhanced dual-bit delta-sigma conversion technology. The device is packaged in a 16-pin TSSOP and is intended for consumer through professional audio equipment.
What are the key specifications of AK5358AET that engineers should know?
The AK5358AET combines 24-bit stereo conversion, an 8 kHz-to-96 kHz sampling-rate range, and an I2S digital interface in a 16-pin TSSOP. According to the manufacturer datasheet, it uses Enhanced dual-bit delta-sigma architecture and includes PDN-controlled power-down operation. Its main applications are consumer audio, professional audio systems, and other equipment requiring two-channel analog-to-digital conversion.
What is the sampling rate range of AK5358AET?
The AK5358AET supports sampling rates from 8 kHz to 96 kHz. According to the manufacturer datasheet, this range allows the same stereo converter to serve speech-oriented capture, conventional audio acquisition, and high-rate professional audio systems. The operating clock and digital audio interface must be configured for the selected rate, and valid output data begins only after the documented power-up initialization sequence.
What digital audio interface does AK5358AET use?
The AK5358AET uses an I2S digital audio interface. According to the manufacturer datasheet, this interface carries converted stereo audio data between the ADC and a compatible digital audio processor. Interface mode, clock relationships, and data timing must follow the datasheet timing diagrams. I2S support makes the converter suitable for digital signal processors, audio controllers, and dedicated USB audio interface circuits.
Where can I download the AK5358AET datasheet PDF?
The AK5358AET datasheet PDF is available from the Asahi Kasei Microdevices document link listed on this page and from the manufacturer's datasheet mirror. According to the manufacturer datasheet, the document covers the 24-bit stereo converter, its 8 kHz-to-96 kHz operating range, I2S interface, power behavior, electrical characteristics, and application information. Use that document for final pin assignment, timing, and circuit-design decisions.
Where can I find the AK5358AET pinout?
The authoritative AK5358AET pin assignment is shown in the pin-description table and package drawing in the manufacturer datasheet. The device uses a 16-pin TSSOP package, but the complete numbered pin list is not reproduced on this page. According to the manufacturer datasheet, PDN controls power-down and resets the digital filter, while the I2S clock and data signals carry the converted stereo audio data.
Is AK5358AET suitable for a consumer audio system?
Yes, the AK5358AET is suitable for consumer audio systems requiring stereo analog-to-digital conversion. According to the manufacturer datasheet, it provides 24-bit resolution, supports 8 kHz-to-96 kHz sampling, and offers an I2S interface in a compact 16-pin TSSOP. It can also serve professional audio applications within the same stated operating range, subject to the system-level signal, clock, layout, and performance requirements.
Can AK5358AET be used in a USB audio interface?
The AK5358AET can serve as the analog conversion stage in a USB audio interface when the USB controller consumes I2S data. Its 24-bit stereo conversion, 8 kHz-to-96 kHz range, and I2S output match common digital audio signal chains. According to the manufacturer datasheet, valid SDTO data is produced after power-up initialization, so the USB firmware and hardware must avoid treating transient bus activity as valid audio.
When should I choose AK5358AET over a functionally similar audio ADC?
Choose the AK5358AET when the design needs a confirmed 24-bit stereo converter with an 8 kHz-to-96 kHz sampling range and an I2S interface in a 16-pin TSSOP. According to the manufacturer datasheet, the part is specifically positioned for consumer and professional audio systems. The choice should also account for analog input range, clocking, startup behavior, PCB footprint, and the digital processor's supported audio formats.
What is the best drop-in replacement for AK5358AET?
No independently confirmed drop-in replacement for the AK5358AET is identified in the cross-reference material for this part. According to the manufacturer datasheet, the target is a 16-pin TSSOP stereo ADC with 24-bit resolution, 8 kHz-to-96 kHz sampling, and an I2S interface. A replacement should be accepted only after its complete pinout, electrical ratings, clock requirements, and startup behavior have been checked against that footprint.
What can replace AK5358AET without changing the PCB?
A PCB-compatible replacement must use the same 16-pin TSSOP footprint and preserve the AK5358AET pin functions and electrical requirements. The AK5358AET-E2 ordering variant is documented, but the confirmed cross-reference material does not establish additional drop-in candidates with clearly different engineering characteristics. According to the manufacturer datasheet, any substitution must preserve 24-bit stereo conversion, the 8 kHz-to-96 kHz rate range, and the I2S interface.
What is the difference between AK5358AET and AK5358AET-E2?
The AK5358AET and AK5358AET-E2 are documented ordering variants associated with the AK5358A stereo converter family. According to the manufacturer datasheet, the core AK5358A device is a 24-bit stereo ADC with 8 kHz-to-96 kHz sampling and an I2S interface. Before treating the -E2 version as a replacement, confirm its ordering suffix, temperature rating, package marking, and lifecycle terms against the manufacturer documentation.
Where can I buy AK5358AET online?
Use the Request a Quote form on this page to request AK5358AET pricing, availability, minimum order quantity, and delivery information from XAIPART. The current product listing identifies the AK5358AET as a 24-bit, 8 kHz-to-96 kHz I2S converter in a 16-pin TSSOP. A firm quotation and lead-time confirmation are appropriate when production scheduling, traceability, or exact package suffix matters.
What is the price of AK5358AET?
Use the Request a Quote form on this page for the current AK5358AET unit price and volume terms. According to the manufacturer datasheet, the part is a 24-bit stereo ADC supporting 8 kHz-to-96 kHz sampling through an I2S interface. Pricing can depend on order quantity, package suffix, supply position, and required delivery schedule, so a current quotation is preferable to an outdated catalog reference.
What is the lead time and stock status for AK5358AET?
Request the current AK5358AET stock position, minimum order quantity, and lead time through the Request a Quote form on this page. According to the manufacturer datasheet, the device is a 24-bit stereo ADC with an 8 kHz-to-96 kHz sampling range in a 16-pin TSSOP. Production planners should obtain written confirmation for the exact ordering suffix and required shipment date.
How should power-down and startup be handled with AK5358AET?
Assert the AK5358AET PDN pin low to enter power-down mode and reset its digital filter, then release PDN to begin analog initialization. According to the manufacturer datasheet, SDTO becomes available after 4129 LRCK cycles following power-up. System firmware should therefore use reset or data-valid qualification and must not treat early digital bus activity as valid converted audio.

エンジニアリング参考データ: AK5358AET — 比較、設計ガイダンス、コンプライアンス情報。

選定ガイド

Choose the AK5358AET when a design requires a 24-bit stereo ADC, an 8 kHz-to-96 kHz sampling range, and an I2S interface in a 16-pin TSSOP. It is particularly suitable for consumer, professional, USB-audio, voice-capture, and monitoring systems where both channels must be converted by one device. Before selecting it, verify the analog input range, common-mode requirements, clocking method, startup behavior, and package-level electrical limits in the manufacturer datasheet. Do not substitute a converter merely because it also produces I2S data; the replacement must also preserve the complete 16-pin footprint and startup sequence. No independently confirmed drop-in candidate with distinct engineering characteristics is identified, so an equivalent should be treated as a new design qualification unless its manufacturer explicitly documents pin compatibility.

代替品との比較

パラメータ この製品
Brand Asahi Kasei Microdevices
Package 16-pin TSSOP
Converter Type Stereo A/D converter
Resolution 24 bit
Sampling Rate Range 8 kHz to 96 kHz
Digital Interface I2S
Conversion Architecture Enhanced dual-bit delta-sigma
Power-Down Control PDN pin
Output Ready Timing After 4129 LRCK cycles following initialization

主な差別化要因

  • Wide stereo conversion range (vs Lower-rate stereo audio ADC)
  • Full 24-bit conversion resolution (vs 16-bit audio ADC)
  • Integrated two-channel conversion (vs Two separate single-channel ADC packages)
  • Digital audio interface (vs Parallel-only converter interface)

設計ノート

Route the two analog input channels as short, symmetrical traces on the PCB and maintain a continuous ground reference beneath them. Keep switching-clock and digital-interface traces away from the input pins, and place input filtering components close to the converter. According to the manufacturer datasheet, the device performs sensitive stereo audio conversion, so long parallel input runs and shared return paths can increase coupling and channel imbalance.

Do not treat SDTO as valid immediately after power release. According to the manufacturer datasheet, the AK5358AET begins analog initialization after power-down mode is exited and makes output data available after 4129 LRCK cycles. Use a reset indication or data-valid qualification in the receiving controller, and ensure the PDN sequence matches the system clock and power-supply startup plan.

Separate analog and digital return-current paths as far as practical, with the analog ground reference serving the input circuitry and the converter's analog section. Place decoupling and input-network components close to their relevant pins and avoid routing the I2S clock and data beneath sensitive analog traces. Apply the manufacturer's recommended reference circuit and component placement to preserve channel matching and reduce conversion noise.

コンプライアンス情報

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
鉛フリー
Unknown
ハロゲンフリー
Unknown
紛争鉱物
Unknown

The AK5358AET is an audio mixed-signal IC rather than an automotive-qualified device. Specific environmental and material-compliance statements should be confirmed against the current manufacturer product documentation.

データ検証日: 2026-11-16 — データはXAIPARTの部品エンジニアリングチームによって検証・管理されています

関連検索

ak5358aet datasheet AK5358AET datasheet pdf AK5358AET pinout AK5358AET 16 TSSOP AK5358AET 24 bit ADC AK5358AET 8kHz 96kHz AK5358AET I2S interface AK5358AET stereo ADC AK5358AET drop-in replacement AK5358AET equivalent AK5358AET application circuit AK5358AET price Asahi Kasei AK5358AET

関連部品&用語

Asahi Kasei Microdevices AK5358AET AK5358A AK5358AET-E2 stereo audio ADC analog-to-digital converter data converter IC mixed-signal IC delta-sigma ADC Enhanced dual-bit delta-sigma 24-bit resolution I2S interface 16-pin TSSOP TSSOP family surface-mount package consumer audio professional audio USB audio interface network audio industrial audio monitoring PDN pin LRCK SDTO power-down mode digital filter reset
クイック見積RFQ
詳細をすべてご記入ください — 営業チームが24時間以内にご返信いたします
部品番号 メーカー パッケージ QTY 目標価格 小計
✓
見積を送信しました!

24時間以内にメールでご返信いたします

1
RFQ送信済み
2
見積受領
3
注文済み
4
お支払い
5
発送済み
6
配達済み
RFQの詳細を表示