AK5358AET - 24-Bit Stereo ADC, 8-96kHz | AKM
MPN: AK5358AET ✓ NakahandaAK5358AET Ulas
An audio ADC is a mixed-signal semiconductor that converts continuous analog voltage signals into digital data for processing, storage, transmission, or playback. Its position in the signal chain is between the analog input section and the digital audio subsystem. Within the broader semiconductor hierarchy, the AK5358AET belongs to the ADC and DAC class of data-converter ICs, combining analog input circuitry, clocking, filtering, and a digital audio interface in one package.
The principal specifications distinguish the AK5358AET from lower-resolution or lower-rate converters. Its 24-bit resolution supports high numerical precision, while the 8 kHz minimum and 96 kHz maximum sampling rates cover voice-band through high-resolution audio acquisition. The integrated I2S interface provides a conventional digital connection for audio processors, and the stereo architecture reduces the number of separate converter packages required for a conventional two-channel signal path.
The converter uses Enhanced dual-bit delta-sigma technology. This architecture supports accurate conversion while integrating the analog and digital conversion functions into a compact mixed-signal IC. A delta-sigma ADC includes a modulator and digital decimation-filter functions rather than relying only on a conventional flash or successive-approximation conversion structure. The AK5358A device also includes power-down control and digital-filter reset behavior, with output availability occurring after the documented initialization sequence following operation.
Typical uses include consumer audio equipment, professional recording and playback systems, microphone preamp and line-input conversion, USB or network audio interfaces, and industrial monitoring systems that must capture stereo audio. The I2S interface is particularly useful when the converter is connected to a digital signal processor, audio codec, microcontroller, or dedicated USB audio controller.
A practical design must preserve clean analog grounding, short input routing, suitable input biasing, and stable clock and power connections. Follow the manufacturer datasheet for analog input, common-mode voltage, digital-interface mode, power-supply sequencing, and decoupling values. The datasheet also requires proper power-down and initialization handling so that valid output data is not interpreted before the converter has completed its startup sequence.
This product record combines the AK5358AET converter specifications, package and interface details, sourcing information, application guidance, and drop-in replacement analysis. It also distinguishes confirmed same-package candidates from products that merely perform a similar function, helping engineers avoid substitutions that require PCB or interface changes.
Mga alternatibo na pwedeng ilagay na AK5358AET — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
Variante sa Seri na ito
Katulad na modelo sa serye na katugma sa pagpasok AK5358AET (parehas na form factor at footprint) — pagkakaiba sa Minimum Sampling Rate, Sampling Rate Range.
Wala ng magagamit na drop-in alternatibo para sa produkto na ito.
Hilingin ang AlternatiboAK5358AET Mga Pinakamataas na Rating at Electrical Characteristics
| Converter Type | Stereo audio A/D converter |
| Pangangasiwaan | 24 bit |
| Sampling Rate Range | 8 kHz to 96 kHz |
| Minimum Sampling Rate | 8 kHz |
| Maximum Sampling Rate | 96 kHz |
| Conversion Architecture | Enhanced dual-bit delta-sigma |
| Audio Channels | 2 channels |
| Digital Audio Interface | I2S |
| Packhaging | 16-pin TSSOP |
| Uri ng Pagpapasok | Surface mount |
| Target Audio Segment | Consumer to professional audio systems |
| Power-Down Control | PDN pin |
| Digital Filter Reset | Performed when PDN is asserted low |
| Analog Initialization | Initiated after power-down mode is exited |
| Output Data Readiness | After 4129 LRCK cycles following initialization |
Gabay sa Pin Configuration ng AK5358AET 16-pin tssop
Pin configuration para sa AK5358AET (16-pin tssop package). Ang analog component na ito ay may input, output, at power supply pins. Sumangguni sa datasheet ng manufacturer para sa offset null, compensation, at enable pin configurations. Perpekto para sa signal conditioning at amplifier circuits.
Wala ng detalyadong pinout data na magagamit para sa AK5358AET.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
AK5358AET ay nararapat para sa 6 aplikasyons: Consumer Audio Equipment, Professional Audio Recording, USB Audio Interface, Microphone and Line-Input Conversion, Network and Communications Audio, Industrial Audio Monitoring.
Consumer Audio Equipment
The AK5358AET fits consumer audio equipment that needs compact stereo analog-to-digital conversion before digital playback, storage, or wireless transmission. Its 24-bit resolution provides a high numerical precision, while the 8 kHz-to-96 kHz range accommodates different operating modes within one converter. The I2S interface allows direct connection to an audio processor or digital signal processor. According to the manufacturer datasheet, the AK5358AET is intended for consumer through professional audio systems, making the 16-pin TSSOP suitable for space-conscious equipment with two analog input channels.
Professional Audio Recording
The AK5358AET is applicable to professional audio recording equipment requiring two-channel conversion at rates up to 96 kHz. Its 24-bit stereo architecture supplies one converter for left and right channels, reducing analog routing compared with separate single-channel devices. The I2S interface provides a standard path into a digital signal processor or recording controller. According to the manufacturer datasheet, the converter is suitable for professional audio systems and uses Enhanced dual-bit delta-sigma technology. System-level noise, clock jitter, grounding, and input-conditioning requirements still determine the achievable recording quality.
USB Audio Interface
The AK5358AET can form the stereo capture stage of a USB audio interface when the host controller accepts I2S audio. The converter supports sampling rates from 8 kHz to 96 kHz, allowing one design to cover speech, multimedia audio, and higher-rate capture modes. Its 24-bit data format and I2S output simplify the boundary between analog inputs and a digital USB audio engine. According to the manufacturer datasheet, output data becomes valid only after power-up initialization, so firmware must qualify the data-ready state rather than relying on bus timing alone.
Microphone and Line-Input Conversion
The AK5358AET can digitize left and right microphone or line-level outputs after the appropriate preamplifier and signal-conditioning stages. Its stereo 24-bit conversion avoids using two separate ADC packages in a conventional balanced-input or dual-source design, and the I2S interface carries the two channels to a digital audio engine. According to the manufacturer datasheet, it supports 8 kHz-to-96 kHz sampling for consumer and professional audio systems. Input bias, common-mode voltage, gain, anti-alias filtering, and grounding must be designed around the manufacturer application circuit.
Network and Communications Audio
The AK5358AET is suitable for network audio nodes, communication terminals, and voice-capture systems that convert stereo analog inputs before encoding or transmission. Its sampling range begins at 8 kHz for speech-oriented processing and extends to 96 kHz for higher-quality acquisition, while the 24-bit converter provides numerical headroom for gain control and digital filtering. The I2S output can feed a network audio processor or communications codec. According to the manufacturer datasheet, the device is designed for consumer through professional audio systems and requires correct startup sequencing before its output is used.
Industrial Audio Monitoring
The AK5358AET can support industrial monitoring systems that capture two analog audio channels for event recording, condition monitoring, or diagnostic analysis. The 8 kHz-to-96 kHz range allows the sampling mode to follow the signal bandwidth, and the 24-bit stereo output preserves fine amplitude information for downstream processing. Its I2S interface connects to an embedded processor, digital signal processor, or industrial controller. According to the manufacturer datasheet, the converter supports consumer and professional audio systems; industrial deployments should also verify environmental limits, grounding, isolation, and electromagnetic requirements.
Impormasyon ng Talumpati sa Engineering for AK5358AET — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto |
|---|---|
| Brand | Asahi Kasei Microdevices |
| Package | 16-pin TSSOP |
| Converter Type | Stereo A/D converter |
| Resolution | 24 bit |
| Sampling Rate Range | 8 kHz to 96 kHz |
| Digital Interface | I2S |
| Conversion Architecture | Enhanced dual-bit delta-sigma |
| Power-Down Control | PDN pin |
| Output Ready Timing | After 4129 LRCK cycles following initialization |
Pangunahing mga Pagkakaiba
- Wide stereo conversion range (kumpara saLower-rate stereo audio ADC)
- Full 24-bit conversion resolution (kumpara sa16-bit audio ADC)
- Integrated two-channel conversion (kumpara saTwo separate single-channel ADC packages)
- Digital audio interface (kumpara saParallel-only converter interface)
Talaan ng Disenyo
Route the two analog input channels as short, symmetrical traces on the PCB and maintain a continuous ground reference beneath them. Keep switching-clock and digital-interface traces away from the input pins, and place input filtering components close to the converter. According to the manufacturer datasheet, the device performs sensitive stereo audio conversion, so long parallel input runs and shared return paths can increase coupling and channel imbalance.
Do not treat SDTO as valid immediately after power release. According to the manufacturer datasheet, the AK5358AET begins analog initialization after power-down mode is exited and makes output data available after 4129 LRCK cycles. Use a reset indication or data-valid qualification in the receiving controller, and ensure the PDN sequence matches the system clock and power-supply startup plan.
Separate analog and digital return-current paths as far as practical, with the analog ground reference serving the input circuitry and the converter's analog section. Place decoupling and input-network components close to their relevant pins and avoid routing the I2S clock and data beneath sensitive analog traces. Apply the manufacturer's recommended reference circuit and component placement to preserve channel matching and reduce conversion noise.
Impormasyon ng Pagsunod sa Kautusan
The AK5358AET is an audio mixed-signal IC rather than an automotive-qualified device. Specific environmental and material-compliance statements should be confirmed against the current manufacturer product documentation.