AKM (Asahi Kasei Microdevices)

AK5385BVS - 24-Bit Stereo Audio ADC | Asahi Kasei

部品番号: AK5385BVS ✓ 生産中
3 V to 5.25 V Vdss 28-SOP Package
MOQ: 1 |

AK5385BVS 概要

The Asahi Kasei Microdevices AK5385BVS is a 24-bit, two-channel audio analog-to-digital converter with a 192 kHz sampling rate, supplied in a 28-SOP package. The AK5385B family uses Enhanced Dual Bit modulator architecture to balance conversion accuracy with implementation cost in high-end audio systems. Its stated sampling characteristics support operation from 8 kHz to 216 kHz according to the product listing.

An audio ADC is a mixed-signal integrated circuit that converts left and right analog audio voltages into digital words for processing, storage, transmission, or playback. Within the semiconductor hierarchy, an ADC belongs to the data-converter family, the analog-to-digital converter category, and ultimately the integrated-circuit hierarchy. AKM positions the AK5385B for high-end audio equipment requiring simultaneous stereo conversion and a 24-bit digital word length.

The headline specifications are 24-bit resolution, two-channel operation, and a maximum sampling rate of 192 kHz. The listed 8 kHz to 216 kHz range reflects the component family's broad sampling-rate coverage. These characteristics make the AK5385B relevant to professional audio conversion, digital recording, studio monitoring, and high-fidelity playback systems where the source material requires greater than CD-standard 16-bit resolution.

Internally, the AK5385B employs Enhanced Dual Bit architecture. This modulator approach is central to the converter's high-accuracy positioning and allows the manufacturer to describe the device as a high-accuracy, cost-conscious stereo ADC. The AK5385B uses serial digital communication, enabling its converted audio data to be transferred to a digital audio processor through a compact board-level interface.

Power-system integration requires separate analog and digital supply domains. Listed information identifies an analog supply range of 3 V to 5.25 V and a digital supply range of 4.75 V to 5.25 V. These supply requirements should be treated as fundamental input-range constraints during analog and digital power planning. Clocking, input scaling, grounding, and decoupling must be implemented according to the manufacturer datasheet because no complete application schematic or pin-level electrical table is reproduced on this page.

The AK5385BVS is intended for designs where 24-bit stereo conversion and high sampling rates matter more than minimum system cost. Its 28-SOP package suits conventional surface-mount PCB assembly, while its serial interface reduces the number of parallel data paths required between the converter and the following digital processing stage. Confirm timing, polarity, and signal-level compatibility with the host audio processor before finalizing the interface.

This product page combines the verified resolution, channel count, sampling-rate, supply, interface, and package characteristics with practical application guidance and drop-in-replacement analysis. It also distinguishes documented parameters from design information engineers should confirm in the manufacturer datasheet, helping shorten component selection while preserving careful engineering review.

ドロップイン代替品: AK5385BVS — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。

このシリーズのバリエーション

同一シリーズでドロップイン互換のモデル: AK5385BVS (同一形状・フットプリント) — 相違点: Package, Number of Channels, Resolution, Converter Type, Dynamic Range.

AKM (Asahi Kasei Microdevices)
Package: 28-pin SOP
Converter Type: 24-bit delta-sigma ADC
Dynamic Range: 114 dB
比較対象 AK5385BVS →
AKM (Asahi Kasei Microdevices)
Package: 28-pin SOP (7.50 mm / 0.295" width)
Number of Channels: 2 (stereo)
Resolution: 24-bit
比較対象 AK5385BVS →

この製品に利用可能なドロップイン代替品はありません。

代替品をリクエスト

AK5385BVS 最大定格&電気的特性

Converter Type Stereo audio analog-to-digital converter
分解能 24 bit
Number of Channels 2 channels
Maximum Sampling Rate 192 kHz
Sampling Rate Range 8 kHz to 216 kHz
Modulator Architecture Enhanced Dual Bit
Output Interface Serial
Analog Supply Voltage Range 3 V to 5.25 V
Digital Supply Voltage Range 4.75 V to 5.25 V
パッケージ 28-SOP
実装タイプ Surface Mount
Device Category Data Acquisition, ADCs/DACs, Special Purpose
Signal Type Analog audio input
Application Class High-end audio systems

AK5385BVS 28-sop ピン配置ガイド

AK5385BVS (28-sop パッケージ) のピン配置。 このアナログコンポーネントは、入力、出力、および電源ピンを備えています。オフセットナル、補償、イネーブルピンの設定については、メーカーのデータシートを参照してください。信号調整やアンプ回路に最適です。

AK5385BVS の 28-sop パッケージピン配置図

詳細なピン配置データはありません: AK5385BVS.

詳細は データシート をご参照ください。

主な用途

AK5385BVS の用途: 6 件s: Professional Stereo Recording, High-Resolution Audio ADC, Digital Studio Monitoring, Multichannel Audio Capture, Audio Test and Measurement, Digital Audio Processing Platform.

🎧

Professional Stereo Recording

The AK5385BVS fits a professional stereo recording front end because it combines two-channel conversion with 24-bit resolution and operation up to a 192 kHz nominal sampling rate. Its Enhanced Dual Bit modulator architecture is designed for high-accuracy audio acquisition, while the serial interface transfers converted data to a digital audio processor without requiring a wide parallel bus. In a recording chain, the converter should follow carefully scaled, low-noise preamplifier outputs and use the manufacturer reference network for balanced or unbalanced input conditioning. Supply planning must separately accommodate the 3 V to 5.25 V analog domain and 4.75 V to 5.25 V digital domain. The final design should verify input range, clock format, serial timing, and grounding against the complete manufacturer application circuit before production.

🔧

High-Resolution Audio ADC

The AK5385BVS is appropriate for a dedicated high-resolution audio ADC module that must preserve 24-bit stereo data while supporting a broad 8 kHz to 216 kHz listed sampling range. Such a module can feed a digital mixer, host processor, or storage engine while keeping the converter-to-processor connection serial and compact. The 28-SOP package supports conventional surface-mount assembly, but careful analog layout remains essential: sensitive input traces should be short and isolated from clock and serial-data activity. Analog and digital supplies require independent decoupling paths, and the implementation must preserve the stated 3 V to 5.25 V analog and 4.75 V to 5.25 V digital operating windows. Confirm all timing, logic levels, and startup behavior from the manufacturer datasheet.

🎧

Digital Studio Monitoring

The AK5385BVS can serve as the stereo capture stage in a digital studio monitoring system where simultaneous left- and right-channel conversion and 24-bit word length are useful. Its sampling capability reaches 192 kHz nominally, allowing the same converter architecture to support high-resolution monitoring and recording workflows when the host equipment supports the corresponding clock and data rates. The serial interface reduces board-level routing relative to a parallel conversion interface, but clock jitter and edge alignment still require disciplined layout. Keep the analog signal path away from digital return currents, reference the converter according to the manufacturer layout, and provide local bypass capacitance at each supply pin. Validate channel alignment, gain distribution, and full-scale handling in the complete signal chain.

🏭

Multichannel Audio Capture

The AK5385BVS is useful in a multichannel capture system that handles audio in stereo pairs. Its two-channel architecture provides a repeatable building block for front ends requiring more than two physical channels, provided each pair has appropriate amplification and routing before conversion. The 24-bit resolution and operation up to 192 kHz support high-fidelity capture, while Enhanced Dual Bit architecture addresses the converter's accuracy positioning. Because each IC is a dedicated stereo device rather than a programmable multichannel mixer, system-level channel alignment and synchronization depend on the clock distribution and processing architecture. Apply identical reference and decoupling practices across converter pairs, keep analog inputs away from digital buses, and verify inter-channel synchronization requirements before scaling the design to additional pairs.

🖥️

Audio Test and Measurement

The AK5385BVS can be integrated into an audio test and measurement instrument that captures two analog channels for level, frequency, or signal-integrity analysis. Its 24-bit conversion depth and high sampling-rate capability are useful when the measurement objective requires more dynamic range and bandwidth than a conventional low-resolution telemetry converter. The serial data path can connect to a measurement processor or FPGA, provided clocking, framing, and data capture are configured according to the manufacturer timing specification. Analog excitation circuitry should drive the converter within its specified input range without clipping the input network. Separate analog and digital supply filtering helps prevent converter noise from entering the measurement chain, while careful reference layout minimizes gain errors that could otherwise distort computed results.

🧩

Digital Audio Processing Platform

The AK5385BVS is well suited to a digital audio processing platform that receives analog stereo sources and forwards converted data to a processor, DSP, or storage controller. Its two-channel serial interface reduces the number of PCB traces relative to a parallel data architecture, while 24-bit resolution preserves source detail for downstream gain control, mixing, or encoding. The platform must provide clock generation and serial framing compatible with the AK5385B operating mode. Because analog and digital domains have separate listed ranges—3 V to 5.25 V and 4.75 V to 5.25 V—power sequencing and return-current control should be planned deliberately. Use local bypass components, maintain separation between sensitive analog inputs and digital timing signals, and verify data latency and reset behavior in the system-level design.

What is the AK5385BVS?
The AK5385BVS is a 24-bit, two-channel audio analog-to-digital converter from Asahi Kasei Microdevices, with operation up to a 192 kHz sampling rate in a 28-SOP package. According to the manufacturer datasheet information, the AK5385B uses Enhanced Dual Bit modulator architecture for high-accuracy stereo conversion in high-end audio systems. Its serial digital interface allows the two converted channels to connect efficiently to a digital audio processor.
What are the key specifications of AK5385BVS that engineers should know?
The AK5385BVS provides 24-bit resolution, two-channel audio conversion, and a nominal maximum sampling rate of 192 kHz in a 28-SOP package. The listed operating range is 8 kHz to 216 kHz, the output interface is serial, and the converter uses Enhanced Dual Bit modulator architecture. Analog and digital supply ranges are listed separately at 3 V to 5.25 V and 4.75 V to 5.25 V, respectively.
Where can I download the AK5385BVS datasheet PDF?
The AK5385BVS datasheet is available through the manufacturer-oriented document listing linked from this page and through the verified AK5385BVS datasheet result. The manufacturer datasheet is the controlling document for the complete pin-description table, electrical characteristics, timing diagrams, application circuit, and recommended operating conditions. Use it to verify signal levels and interface timing before placing the 28-SOP device on a PCB.
Where can I find the AK5385BVS pinout?
The AK5385BVS pinout is defined by the manufacturer datasheet and its 28-pin description table. This page does not reproduce individual pin names because no complete manufacturer pin table is available for verification. Use the pin-description table when assigning analog inputs, analog and digital supplies, clock signals, serial data, and ground connections, and follow the package orientation shown in the manufacturer drawing.
What supply voltages does AK5385BVS require?
The listed AK5385BVS analog supply range is 3 V to 5.25 V, while its digital supply range is 4.75 V to 5.25 V. These are separate supply domains and should not be assumed interchangeable. According to the manufacturer application information, the device also includes analog and digital supply sources, so the PCB power design should provide suitable decoupling and a clean return path for each domain.
What sampling rates does the AK5385BVS support?
The AK5385BVS is listed with an 8 kHz to 216 kHz sampling-rate range and a 192 kHz nominal maximum sampling rate for the AK5385B family. This broad range supports low-rate monitoring as well as high-resolution studio and mastering conversion. Actual operating rates and clock relationships must follow the manufacturer timing specifications and the host digital audio processor's supported modes.
Is the AK5385BVS suitable for high-resolution studio recording?
The AK5385BVS is suitable for high-resolution stereo capture because it provides 24-bit conversion, two audio channels, Enhanced Dual Bit modulator architecture, and operation up to 192 kHz. These features suit professional recording and monitoring paths. The complete signal chain must still provide suitable analog input drive, low-noise supply rails, clean grounding, and a compatible serial audio interface.
Where can I buy AK5385BVS online?
The AK5385BVS can be requested through the Request a Quote form on this page. The form is the appropriate route for current commercial availability, minimum order quantity, lead time, and a quantity-specific quotation. The manufacturer and distributor listings on this page establish the device identity and technical sourcing context without presenting a static commercial figure.
What is the price of AK5385BVS?
A current AK5385BVS quotation is available through the Request a Quote form on this page. Because distributor prices and inventory can change by quantity, package, and market conditions, use that form for current unit pricing and volume breaks. This page does not embed a static price in its technical descriptions, allowing the commercial interface to provide current purchasing information.
What is the lead time and stock status for AK5385BVS?
Current stock status, lead time, and minimum order quantity for the AK5385BVS should be requested through the Request a Quote form on this page. The component is actively listed in distributor catalogs, but that listing does not establish a guaranteed inventory quantity or delivery schedule. Provide the required quantity, package preference, and destination country when requesting the quotation.
What can replace the AK5385BVS?
A drop-in replacement should match the AK5385BVS in 28-SOP footprint, pin assignment, 24-bit stereo conversion, serial interface, and supply requirements. The available comparison pages do not establish that any cross-family part shares the complete footprint and pinout, so an unverified substitute should not be treated as a drop-in. Use the Request a Quote form for the exact MPN and consult the manufacturer datasheet before approving an alternate device.
Is AK5385AVS the same as AK5385BVS?
The AK5385AVS and AK5385BVS belong to the AK5385 family, but the available family comparison information does not provide enough verified data to declare them electrically and pin-for-pin identical. Both are associated with 28-pin packaging, yet shared package count alone does not establish pin compatibility, sampling-mode support, or interface timing. Compare the complete manufacturer datasheets before substituting one for the other.
When should I choose AK5385BVS over AK5392VS or AK5394AVS?
Choose the AK5385BVS when the design specifically requires its documented 24-bit stereo conversion, 192 kHz nominal maximum sampling rate, serial interface, and 28-SOP implementation. AK5392VS and AK5394AVS are distinct converter families and may differ in voltage range, power consumption, package size, and supported functions. Use the published comparison and manufacturer datasheets for each candidate rather than assuming interchangeability.
What is the difference between AK5385BVS and AK5392VS?
The AK5385BVS is identified as a 24-bit, 192 kHz, two-channel converter with Enhanced Dual Bit architecture and Enhanced Dual Bit modulator architecture in a 28-SOP package. The AK5392VS is a separate family member whose voltage range, power consumption, and package characteristics must be checked independently. The verified comparison information does not prove that the two parts are pin-compatible or drop-in replacements.
What is the best cross-brand equivalent for AK5385BVS?
No cross-brand equivalent can be responsibly designated a drop-in replacement from the available information. A valid substitute must match the AK5385BVS's 28-SOP footprint, pin mapping, 24-bit stereo conversion, serial interface, supply voltages, clocking scheme, and timing. Submit the required application parameters through the Request a Quote form so that candidate parts can be screened against those mechanical and electrical constraints.
How should the AK5385BVS be decoupled on a PCB?
Place the required analog and digital bypass capacitors directly beside their associated supply and ground pins, keeping each loop as short as practical. Separate the sensitive analog input routing from digital clock and serial-data paths, and provide a low-impedance return for each supply domain. Exact capacitor values and permitted layouts must be taken from the manufacturer application circuit rather than generalized regulator guidance.

エンジニアリング参考データ: AK5385BVS — 比較、設計ガイダンス、コンプライアンス情報。

選定ガイド

Choose the AK5385BVS when the system requires a dedicated two-channel, 24-bit audio ADC with a serial interface, Enhanced Dual Bit architecture, and operation up to a 192 kHz nominal sampling rate. It is particularly relevant to professional recording, studio monitoring, measurement equipment, and digital audio platforms that can support its 28-SOP footprint and separate analog and digital supply domains. Do not treat AK5392VS, AK5394AVS, AK5385AVS, or another 28-pin converter as an automatic drop-in replacement: the available comparisons do not establish common pin assignments, timing, supply requirements, and sampling modes. Review each manufacturer datasheet and compare the complete application circuit. If a different AKM family provides a better voltage range, power profile, or package size, select it only after verifying clocking, interface format, channel alignment, and board-layout requirements.

代替品との比較

パラメータ この製品
Brand Asahi Kasei Microdevices
Package 28-SOP
Converter Type Stereo audio ADC
Resolution 24 bit
Channel Count 2 channels
Maximum Sampling Rate 192 kHz
Sampling Rate Range 8 kHz to 216 kHz
Output Interface Serial
Analog Supply Voltage 3 V to 5.25 V
Digital Supply Voltage 4.75 V to 5.25 V
Modulator Architecture Enhanced Dual Bit
Primary Application High-end audio systems

主な差別化要因

  • Dedicated high-resolution stereo conversion (vs AK5392VS)
  • Broad listed sampling-rate coverage (vs AK5394AVS)
  • Compact serial data interface (vs AK5391-VS)

設計ノート

Route the two analog input channels away from the clock, serial-data, and supply-conversion paths to minimize differential pickup. Place the converter's input-network and reference components close to the associated pins, and provide a direct return path beneath or near the analog section. Confirm the exact analog and digital ground arrangement in the manufacturer datasheet before assigning copper planes; combining analog and digital returns without a deliberate strategy can move converter noise and clock currents into the input signal path.

Treat the analog and digital supplies as separate domains because their verified operating ranges differ. The analog domain is listed for 3 V to 5.25 V, whereas the digital domain is listed for 4.75 V to 5.25 V. Place the manufacturer-recommended bypass capacitors at the relevant supply pins with short traces and individual return connections. Use the reference schematic for capacitor values, supply startup order, and any digital-interface voltage compatibility rather than applying generic bypass values without checking the complete electrical table.

Generate and distribute the converter clock from a low-noise source, and keep the clock route physically separated from analog inputs where practical. Series damping may be required on the host-processor connection if edge ringing appears on the serial signals. Validate setup and hold timing, clock polarity, data framing, and left-right channel alignment using the manufacturer timing diagrams. These checks are especially important at the upper end of the listed sampling-rate range.

Do not select the AK5385B solely because another AKM converter uses a 28-pin package. Similar package counts do not prove identical pin assignments, clock requirements, supply voltages, or serial formats. Review the complete AK5385BVS pin-description table and application circuit, then compare every electrical and timing constraint. Likewise, confirm that the upstream amplifier can drive the converter's specified input range without clipping, excessive noise, or unintended DC offset.

コンプライアンス情報

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
鉛フリー
Unknown
ハロゲンフリー
Unknown
紛争鉱物
Unknown

The available product information does not state RoHS, REACH, lead-free, halogen-free, or conflict-minerals status. AEC-Q100 qualification is not applicable to this general-purpose audio ADC based on the product information.

データ検証日: 2026-11-16 — データはXAIPARTの部品エンジニアリングチームによって検証・管理されています

関連検索

AK5385BVS datasheet AK5385BVS pinout AK5385BVS datasheet pdf AK5385BVS equivalent AK5385BVS replacement AK5385BVS cross reference AK5385BVS vs AK5392VS AK5385BVS vs AK5394AVS AK5385BVS 24 bit audio ADC AK5385BVS 192 kHz converter AK5385BVS 28-SOP footprint AK5385BVS application circuit AK5385BVS price AK5385BVS stock Asahi Kasei AK5385BVS

関連部品&用語

Asahi Kasei Microdevices AK5385BVS AK5385AVS AK5392VS AK5394AVS AK5383VS AK5391-VS AK5393VS audio ADC analog-to-digital converter data converter mixed-signal IC integrated circuit semiconductor 24-bit resolution stereo audio conversion serial interface Enhanced Dual Bit architecture 192 kHz sampling 8 kHz to 216 kHz sampling range 28-SOP package SOP package family surface-mount package analog supply digital supply high-end audio systems
クイック見積RFQ
詳細をすべてご記入ください — 営業チームが24時間以内にご返信いたします
部品番号 メーカー パッケージ QTY 目標価格 小計
✓
見積を送信しました!

24時間以内にメールでご返信いたします

1
RFQ送信済み
2
見積受領
3
注文済み
4
お支払い
5
発送済み
6
配達済み
RFQの詳細を表示