AK5385BVS - 24-Bit Stereo Audio ADC | Asahi Kasei
MPN: AK5385BVS ✓ 啟用中AK5385BVS 概覽
An audio ADC is a mixed-signal integrated circuit that converts left and right analog audio voltages into digital words for processing, storage, transmission, or playback. Within the semiconductor hierarchy, an ADC belongs to the data-converter family, the analog-to-digital converter category, and ultimately the integrated-circuit hierarchy. AKM positions the AK5385B for high-end audio equipment requiring simultaneous stereo conversion and a 24-bit digital word length.
The headline specifications are 24-bit resolution, two-channel operation, and a maximum sampling rate of 192 kHz. The listed 8 kHz to 216 kHz range reflects the component family's broad sampling-rate coverage. These characteristics make the AK5385B relevant to professional audio conversion, digital recording, studio monitoring, and high-fidelity playback systems where the source material requires greater than CD-standard 16-bit resolution.
Internally, the AK5385B employs Enhanced Dual Bit architecture. This modulator approach is central to the converter's high-accuracy positioning and allows the manufacturer to describe the device as a high-accuracy, cost-conscious stereo ADC. The AK5385B uses serial digital communication, enabling its converted audio data to be transferred to a digital audio processor through a compact board-level interface.
Power-system integration requires separate analog and digital supply domains. Listed information identifies an analog supply range of 3 V to 5.25 V and a digital supply range of 4.75 V to 5.25 V. These supply requirements should be treated as fundamental input-range constraints during analog and digital power planning. Clocking, input scaling, grounding, and decoupling must be implemented according to the manufacturer datasheet because no complete application schematic or pin-level electrical table is reproduced on this page.
The AK5385BVS is intended for designs where 24-bit stereo conversion and high sampling rates matter more than minimum system cost. Its 28-SOP package suits conventional surface-mount PCB assembly, while its serial interface reduces the number of parallel data paths required between the converter and the following digital processing stage. Confirm timing, polarity, and signal-level compatibility with the host audio processor before finalizing the interface.
This product page combines the verified resolution, channel count, sampling-rate, supply, interface, and package characteristics with practical application guidance and drop-in-replacement analysis. It also distinguishes documented parameters from design information engineers should confirm in the manufacturer datasheet, helping shorten component selection while preserving careful engineering review.
直接替換替代品,適用於 AK5385BVS — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: AK5385BVS (相同外形與佔位) — 差異在於 Package, Number of Channels, Resolution, Converter Type, Dynamic Range.
此產品無可直接替換的替代品。
申請替代品AK5385BVS 最大額定值與電氣特性
| Converter Type | Stereo audio analog-to-digital converter |
| 解析度 | 24 bit |
| Number of Channels | 2 channels |
| Maximum Sampling Rate | 192 kHz |
| Sampling Rate Range | 8 kHz to 216 kHz |
| Modulator Architecture | Enhanced Dual Bit |
| Output Interface | Serial |
| Analog Supply Voltage Range | 3 V to 5.25 V |
| Digital Supply Voltage Range | 4.75 V to 5.25 V |
| 封裝 | 28-SOP |
| 安裝類型 | Surface Mount |
| Device Category | Data Acquisition, ADCs/DACs, Special Purpose |
| Signal Type | Analog audio input |
| Application Class | High-end audio systems |
AK5385BVS 28-sop 腳位配置指南
AK5385BVS(28-sop 封裝)的腳位配置。 此類比元件具有輸入、輸出與電源腳位。偏移歸零、補償與致能腳位配置請參閱製造商資料表。適用於訊號調理與放大器電路。
無詳細腳位定義資料: AK5385BVS.
請參閱 資料表 以查看完整腳位配置。
典型應用
AK5385BVS 適用於 6 應用s: Professional Stereo Recording, High-Resolution Audio ADC, Digital Studio Monitoring, Multichannel Audio Capture, Audio Test and Measurement, Digital Audio Processing Platform.
Professional Stereo Recording
The AK5385BVS fits a professional stereo recording front end because it combines two-channel conversion with 24-bit resolution and operation up to a 192 kHz nominal sampling rate. Its Enhanced Dual Bit modulator architecture is designed for high-accuracy audio acquisition, while the serial interface transfers converted data to a digital audio processor without requiring a wide parallel bus. In a recording chain, the converter should follow carefully scaled, low-noise preamplifier outputs and use the manufacturer reference network for balanced or unbalanced input conditioning. Supply planning must separately accommodate the 3 V to 5.25 V analog domain and 4.75 V to 5.25 V digital domain. The final design should verify input range, clock format, serial timing, and grounding against the complete manufacturer application circuit before production.
推薦
High-Resolution Audio ADC
The AK5385BVS is appropriate for a dedicated high-resolution audio ADC module that must preserve 24-bit stereo data while supporting a broad 8 kHz to 216 kHz listed sampling range. Such a module can feed a digital mixer, host processor, or storage engine while keeping the converter-to-processor connection serial and compact. The 28-SOP package supports conventional surface-mount assembly, but careful analog layout remains essential: sensitive input traces should be short and isolated from clock and serial-data activity. Analog and digital supplies require independent decoupling paths, and the implementation must preserve the stated 3 V to 5.25 V analog and 4.75 V to 5.25 V digital operating windows. Confirm all timing, logic levels, and startup behavior from the manufacturer datasheet.
推薦
Digital Studio Monitoring
The AK5385BVS can serve as the stereo capture stage in a digital studio monitoring system where simultaneous left- and right-channel conversion and 24-bit word length are useful. Its sampling capability reaches 192 kHz nominally, allowing the same converter architecture to support high-resolution monitoring and recording workflows when the host equipment supports the corresponding clock and data rates. The serial interface reduces board-level routing relative to a parallel conversion interface, but clock jitter and edge alignment still require disciplined layout. Keep the analog signal path away from digital return currents, reference the converter according to the manufacturer layout, and provide local bypass capacitance at each supply pin. Validate channel alignment, gain distribution, and full-scale handling in the complete signal chain.
推薦
Multichannel Audio Capture
The AK5385BVS is useful in a multichannel capture system that handles audio in stereo pairs. Its two-channel architecture provides a repeatable building block for front ends requiring more than two physical channels, provided each pair has appropriate amplification and routing before conversion. The 24-bit resolution and operation up to 192 kHz support high-fidelity capture, while Enhanced Dual Bit architecture addresses the converter's accuracy positioning. Because each IC is a dedicated stereo device rather than a programmable multichannel mixer, system-level channel alignment and synchronization depend on the clock distribution and processing architecture. Apply identical reference and decoupling practices across converter pairs, keep analog inputs away from digital buses, and verify inter-channel synchronization requirements before scaling the design to additional pairs.
推薦
Audio Test and Measurement
The AK5385BVS can be integrated into an audio test and measurement instrument that captures two analog channels for level, frequency, or signal-integrity analysis. Its 24-bit conversion depth and high sampling-rate capability are useful when the measurement objective requires more dynamic range and bandwidth than a conventional low-resolution telemetry converter. The serial data path can connect to a measurement processor or FPGA, provided clocking, framing, and data capture are configured according to the manufacturer timing specification. Analog excitation circuitry should drive the converter within its specified input range without clipping the input network. Separate analog and digital supply filtering helps prevent converter noise from entering the measurement chain, while careful reference layout minimizes gain errors that could otherwise distort computed results.
推薦
Digital Audio Processing Platform
The AK5385BVS is well suited to a digital audio processing platform that receives analog stereo sources and forwards converted data to a processor, DSP, or storage controller. Its two-channel serial interface reduces the number of PCB traces relative to a parallel data architecture, while 24-bit resolution preserves source detail for downstream gain control, mixing, or encoding. The platform must provide clock generation and serial framing compatible with the AK5385B operating mode. Because analog and digital domains have separate listed ranges—3 V to 5.25 V and 4.75 V to 5.25 V—power sequencing and return-current control should be planned deliberately. Use local bypass components, maintain separation between sensitive analog inputs and digital timing signals, and verify data latency and reset behavior in the system-level design.
推薦
推薦產品摘要
工程參考資料,適用於 AK5385BVS — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 |
|---|---|
| Brand | Asahi Kasei Microdevices |
| Package | 28-SOP |
| Converter Type | Stereo audio ADC |
| Resolution | 24 bit |
| Channel Count | 2 channels |
| Maximum Sampling Rate | 192 kHz |
| Sampling Rate Range | 8 kHz to 216 kHz |
| Output Interface | Serial |
| Analog Supply Voltage | 3 V to 5.25 V |
| Digital Supply Voltage | 4.75 V to 5.25 V |
| Modulator Architecture | Enhanced Dual Bit |
| Primary Application | High-end audio systems |
主要差異化特點
- Dedicated high-resolution stereo conversion (對比AK5392VS)
- Broad listed sampling-rate coverage (對比AK5394AVS)
- Compact serial data interface (對比AK5391-VS)
設計說明
Route the two analog input channels away from the clock, serial-data, and supply-conversion paths to minimize differential pickup. Place the converter's input-network and reference components close to the associated pins, and provide a direct return path beneath or near the analog section. Confirm the exact analog and digital ground arrangement in the manufacturer datasheet before assigning copper planes; combining analog and digital returns without a deliberate strategy can move converter noise and clock currents into the input signal path.
Treat the analog and digital supplies as separate domains because their verified operating ranges differ. The analog domain is listed for 3 V to 5.25 V, whereas the digital domain is listed for 4.75 V to 5.25 V. Place the manufacturer-recommended bypass capacitors at the relevant supply pins with short traces and individual return connections. Use the reference schematic for capacitor values, supply startup order, and any digital-interface voltage compatibility rather than applying generic bypass values without checking the complete electrical table.
Generate and distribute the converter clock from a low-noise source, and keep the clock route physically separated from analog inputs where practical. Series damping may be required on the host-processor connection if edge ringing appears on the serial signals. Validate setup and hold timing, clock polarity, data framing, and left-right channel alignment using the manufacturer timing diagrams. These checks are especially important at the upper end of the listed sampling-rate range.
Do not select the AK5385B solely because another AKM converter uses a 28-pin package. Similar package counts do not prove identical pin assignments, clock requirements, supply voltages, or serial formats. Review the complete AK5385BVS pin-description table and application circuit, then compare every electrical and timing constraint. Likewise, confirm that the upstream amplifier can drive the converter's specified input range without clipping, excessive noise, or unintended DC offset.
合規資訊
The available product information does not state RoHS, REACH, lead-free, halogen-free, or conflict-minerals status. AEC-Q100 qualification is not applicable to this general-purpose audio ADC based on the product information.