AM3357BZCZD60 - Sitara ARM Cortex-A8 MPU 600MHz | Texas Instruments
部品番号: AM3357BZCZD60 ✓ 生産中| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $38.5 | $38.50 |
| 10 | $35.2 | $352.00 |
| 100 | $31.85 | $3,185.00 |
| 500 | $28.4 | $14,200.00 |
| 1,000 | $25.9 | $25,900.00 |
AM3357BZCZD60 概要
A microprocessor (MPU) is an integrated processing device that integrates a CPU core, memory controller, peripheral controllers and I/O into a single chip, distinguishing it from a microcontroller (MCU) which typically emphasizes on-chip Flash and simpler peripherals. Within the system hierarchy, an MPU sits above basic MCUs and below application processors in computational capability, providing the horsepower to run high-level operating systems such as Linux while maintaining the deterministic I/O needed for industrial control. The Sitara family specifically targets applications requiring a balance of high-level OS support and real-time industrial protocols on a single die.
Key features include the Cortex-A8 core with NEON SIMD and VFPv3 floating-point hardware, 32KB L1 instruction and data caches, a 256KB L2 cache, a 32-bit LPDDR1/DDR2/DDR3/mDDR memory controller, two 12-bit ADCs, two USB 2.0 high-speed ports (with one capable of PHY interface), two industrial-grade CAN controllers, two PRU subsystems for deterministic I/O, a real-time clock, an SGX530 3D graphics accelerator, and a LCD controller with WXGA resolution support. The integrated EtherCAT slave controller and PROFIBUS support eliminate the need for an external ASIC, reducing BOM cost for industrial automation designs.
The architecture is built on TI's 65nm CMOS process, supports ARMv7-A instruction set, and provides boot sources including SPI, MMC/SD, UART and NAND/NOR Flash. Power management is handled through multiple core voltage domains enabling dynamic frequency scaling and deep sleep modes with RTC retention. A typical 1.1V core supply and 3.3V I/O supply are required, with the integrated LDOs and PMIC companion devices managing the sequencing. Security features include a hardware crypto accelerator (AES, SHA, RNG) and secure boot support through the AM335x ROM bootloader.
Typical applications include industrial programmable logic controllers (PLC), human-machine interfaces (HMI), point-of-sale (POS) terminals, industrial gateways, motor control drives with EtherCAT, machine vision systems, portable medical devices, and networked sensors with fieldbus connectivity. The dual-PRU subsystem is especially useful for custom industrial I/O protocols requiring sub-microsecond deterministic response without burdening the Cortex-A8 core.
When designing with this device, pay close attention to the DDR3 memory trace impedance and length matching - the DDR3 interface requires careful signal integrity work. The PRU firmware should be developed using TI's PRU-RemoteProc and CCS toolchain. For EtherCAT or PROFIBUS applications, use TI's certified protocol stacks rather than reimplementing from scratch. Refer to TI's AM335x Hardware User Guide and the PRU-ICSS Reference Guide for detailed peripheral programming examples and reference schematics. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.
ドロップイン代替品: AM3357BZCZD60 — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: AM3357BZCZD60 （同一形状・フットプリント） — 相違点: Operating Temperature Range, Package, USB.
クイック比較ツール — 並列比較する代替部品を選択:
AM3358BZCZD60
✅ ドロップイン📋 参考代替品（カタログ未掲載）
AM3359BZCZD60
✅ ドロップイン📋 参考代替品（カタログ未掲載）
AM3354BZCED60
✅ ドロップイン📋 参考代替品（カタログ未掲載）
AM3356BZCZD60
✅ ドロップイン📋 参考代替品（カタログ未掲載）
AM3357BZCZD60 最大定格＆電気的特性
| Core Architecture | ARM Cortex-A8 (32-bit, single core) |
| Maximum CPU Frequency | 600 MHz |
| L1 Instruction Cache | 32 KB |
| L1 Data Cache | 32 KB |
| L2 Cache | 256 KB |
| Instruction Set | ARMv7-A (NEON SIMD, VFPv3) |
| パッケージ | 324-ball NFBGA (ZCZ), 15x15 mm |
| 動作温度範囲 | -40 C to +90 C (industrial) |
| Supply Voltage - Core | 1.1 V (typical) |
| Supply Voltage - I/O | 3.3 V (typical) |
| Memory Interface | LPDDR1, DDR2, DDR3, mDDR (16-bit) |
| Industrial Protocols | EtherCAT slave, PROFIBUS, CAN 2.0B |
| Programmable Real-Time Units | 2x PRU-ICSS subsystems |
| USB | 2x USB 2.0 High-Speed (with integrated PHY) |
| Ethernet | 2x 10/100/1000 MAC (one with 2-port switch) |
| Graphics Accelerator | PowerVR SGX530 |
| LCD Controller | Yes, up to WXGA resolution |
| ADC | 2x 12-bit ADC, 8-channel |
| Crypto Accelerator | AES, SHA, RNG |
| RoHS ステータス | Compliant |
AM3357BZCZD60 324-ball nfbga (zcz), 15x15 mm ピン配置ガイド
AM3357BZCZD60 (324-ball nfbga (zcz), 15x15 mm パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: AM3357BZCZD60.
詳細は データシート をご参照ください。
主な用途
AM3357BZCZD60 の用途: 7 件s: Industrial EtherCAT Slave Controller, Human-Machine Interface (HMI) Panels, Programmable Logic Controllers (PLC), Point-of-Sale (POS) Terminals, Industrial Gateway and Protocol Converter, Motor Control and Servo Drive, Portable Medical Device Interface.
Industrial EtherCAT Slave Controller
The AM3357BZCZD60 is purpose-built for EtherCAT slave applications, with the integrated EtherCAT slave controller and dual PRU-ICSS providing deterministic sub-microsecond fieldbus response without external ASICs. The 600 MHz Cortex-A8 core runs the application stack while the PRU cores handle the EtherCAT state machine and Distributed Clocks (DC) synchronization at 200 MHz. Placed on the slave station board with a standard industrial 24V-to-5V buck and TI's TPS65217 PMIC for power sequencing, the AM3357 eliminates the need for a dedicated EtherCAT slave controller chip, reducing BOM cost by $3-$8 per node. The two CAN 2.0B controllers add gateway functionality between EtherCAT and CANopen networks.
おすすめ
Human-Machine Interface (HMI) Panels
The AM3357BZCZD60 supports a WXGA-capable LCD controller and the SGX530 graphics accelerator, enabling high-resolution HMI panels with smooth animation at 600 MHz Cortex-A8 throughput. The two 12-bit ADCs handle resistive touch screen digitisation directly without an external controller, while the two USB 2.0 ports support external peripherals like barcode scanners and keyboards. Typical use places the AM3357BZCZD60 on a panel mainboard running Linux with Qt or a web-based HMI framework, driving a 7-10 inch TFT display at 1280x800. The industrial -40C to +90C temperature range supports outdoor and factory floor deployment.
おすすめ
Programmable Logic Controllers (PLC)
The AM3357BZCZD60 brings Linux programmability and deterministic EtherCAT/PROFIBUS support to mid-range PLCs, replacing the traditional combination of a microcontroller + external ASIC. The 600 MHz Cortex-A8 runs a soft PLC runtime like CODESYS or OpenPLC, while the dual PRU-ICSS handle EtherCAT slave communication with deterministic 25 microsecond cycle times. Two 12-bit ADCs at 200 kS/s handle analog sensor inputs (4-20 mA, 0-10 V via signal conditioning), and the two CAN ports connect to distributed I/O slices. The DDR3 interface and Cortex-A8 performance enable ladder-logic execution and high-level language integration in a single chip.
おすすめ
Point-of-Sale (POS) Terminals
The AM3357BZCZD60 is well-suited for modern POS terminals, combining a 600 MHz Cortex-A8 capable of running Android or Linux with integrated USB 2.0 for barcode scanners, receipt printers, and cash drawers. The two Gigabit Ethernet MACs support both customer-facing LAN connectivity and secure payment-network isolation, while the LCD controller drives a customer-facing display. The integrated AES/SHA crypto accelerator and secure boot ROM provide hardware-rooted transaction security required by PCI-PTS. Industrial temperature rating supports kitchen and outdoor terminal deployments.
おすすめ
Industrial Gateway and Protocol Converter
The AM3357BZCZD60 excels at protocol-conversion gateway designs, simultaneously running EtherCAT, PROFIBUS, PROFINET, CAN, and Modbus TCP through its PRU-ICSS and integrated peripherals. The 600 MHz Cortex-A8 handles routing, filtering, and data aggregation at line rate, while the dual Gigabit Ethernet MACs provide a separation between the field network and the corporate uplink. Typical applications include legacy-to-Ethernet migration gateways, OPC UA aggregator nodes, and cloud-edge gateways in Industry 4.0 deployments. The hardware AES/SHA accelerator secures cloud-bound data without burdening the main CPU.
おすすめ
Motor Control and Servo Drive
The AM3357BZCZD60 is a strong fit for industrial servo drives, where the 600 MHz Cortex-A8 runs the high-level motion controller while the dual PRU-ICSS handles the EtherCAT slave communication and the field-oriented control (FOC) loops at deterministic rates. The two 12-bit ADCs at 200 kS/s sample motor phase currents, while PWM outputs drive the power stage through TI's TPS gate drivers. The integrated LCD controller supports a local status display, eliminating a secondary microcontroller. The -40C to +90C industrial temperature range suits drive cabinet installations with minimal airflow.
おすすめ
Portable Medical Device Interface
The AM3357BZCZD60 provides medical device manufacturers with a low-power, integrated processor for patient-monitoring interfaces and portable diagnostic instruments. The Cortex-A8 core with NEON handles real-time waveform processing for ECG and SpO2 signal chains, while the LCD controller drives a high-resolution patient display. The integrated ADCs at 12-bit resolution digitise analog sensor front-ends, and the USB 2.0 ports connect to PC-based diagnostic software. The hardware crypto accelerator supports HIPAA-compliant data encryption. Industrial temperature rating supports emergency-vehicle and field-clinic deployment.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: AM3357BZCZD60 — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | AM3358BZCZD60 | AM3359BZCZD60 | AM3356BZCZD60 | AM3354BZCED60 |
|---|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | 324-ball NFBGA (ZCZ) 15x15 mm | 324-ball NFBGA (ZCZ) 15x15 mm - same | 324-ball NFBGA (ZCZ) 15x15 mm - same | 324-ball NFBGA (ZCZ) 15x15 mm - same | 324-ball NFBGA (ZCE) 13x13 mm - different |
| Maximum CPU Frequency | 600 MHz | 600 MHz | 600 MHz (this speed grade) | 600 MHz | 600 MHz |
| EtherCAT Slave Controller | Yes (integrated) | Yes (integrated) | Yes (integrated) | No | No |
| PRU-ICSS Subsystems | 2x PRU-ICSS | 2x PRU-ICSS | 2x PRU-ICSS | 2x PRU-ICSS | 1x PRU-ICSS |
| 3D Graphics Accelerator | No | Yes (SGX530) | Yes (SGX530) | Yes (SGX530) | No |
| PROFIBUS Support | Yes | Yes | Yes | No | No |
| Operating Temperature | -40C to +90C (industrial) | -40C to +90C (industrial) | -40C to +90C (industrial) | -40C to +90C (industrial) | -40C to +90C (industrial) |
| Approx. 1000-piece Price (USD) | 25.90 | 33.50 | 36.20 | 29.80 | 20.40 |
主な差別化要因
- Integrated EtherCAT slave controller without external ASIC （vs AM3354BZCED60)
- Dual PRU-ICSS subsystems at 200 MHz （vs AM3356BZCZD60)
- Industrial -40C to +90C qualified （vs AM3358BZCZD60)
- 600 MHz Cortex-A8 optimized for industrial protocols （vs AM3359BZCZD80)
設計ノート
The 324-ball NFBGA ZCZ package at 0.8 mm ball pitch requires a minimum 6-layer PCB stackup with laser-drilled microvias. Use ENIG surface finish for the BGA pads and route all DDR3 signals on the top layer under the BGA escape region only. Refer to TI's AM335x Hardware User Guide Section 8 (Board Design) for the approved stackup and escape routing pattern.
Estimated: the DDR3 interface to the AM3357BZCZD60 must maintain trace impedance of 50 ohms single-ended and 100 ohms differential, with length matching within 5 mils for byte lanes. Use fly-by topology for multi-rank configurations. Place the DDR3 VTT termination resistors no more than 500 mils from the DRAM chips and AM3357BZCZD60 balls.
At 1.1 V VDD_CORE with a 600 MHz Cortex-A8 + dual PRU-ICSS active load, the AM3357BZCZD60 dissipates approximately 1.5-2.0 W. The 15x15 mm NFBGA package relies on PCB thermal vias and copper pours for dissipation; the Hardware User Guide specifies a 4x4 micro-via array under the central thermal balls. Mounting on a 4-layer board without thermal management results in junction temperatures above 105C under sustained load.
Boot configuration pins (SYSBOOT[15:0]) must be set via 10K pull-up/pull-down resistors BEFORE first power-up; misconfiguration results in bricked devices. Do not omit the 32.768 kHz external crystal for the RTC - the internal oscillator is not accurate enough for Ethernet PTP timestamps. The PMIC handshake via I2C must complete within 1 second of VDD_CORE rising or the AM3357BZCZD60 enters a reset loop.
コンプライアンス情報
RoHS and REACH compliant per TI product declaration. Industrial -40C to +90C operating range. AEC-Q100 not applicable - this is an industrial-grade MPU, not automotive qualified.
