Microchip Technology

AT90CAN64-16AUR - 16MHz 64KB CAN AVR MCU | Microchip

部品番号: AT90CAN64-16AUR ✓ 生産中
3.3 V to 5 V Vdss 64-TQFP (14 x 14 mm) Package 16 MHz Speed 64 KB (64K x 8) Memory
MOQ: 1 |

AT90CAN64-16AUR 概要

Microchip Technology AT90CAN64-16AUR is an 8-bit AVR RISC microcontroller with a 16 MHz clock, 64 KB of in-system programmable Flash, 64 KB of program memory, and CAN controller capability in a 64-TQFP 14 x 14 mm package. The device is designed for embedded systems that require deterministic control, serial communications, and CAN networking. The -16AUR ordering code identifies the 16 MHz device, the A temperature grade, and the tape-and-reel packaging option.

An AVR microcontroller is an embedded-processing IC that combines a CPU core, Flash program memory, SRAM, timers, serial peripherals, interrupt handling, and general-purpose I/O in one device. The AT90CAN64 family adds a CAN controller to the AVR architecture, placing it between a general-purpose 8-bit microcontroller and a communications-focused embedded controller. Its 53 general-purpose I/O lines support digital interfaces, sensors, actuators, and human-machine interfaces.

Key features include Read-While-Write Flash operation, 2 KB EEPROM, 4 KB SRAM, 53 general-purpose I/O lines, 32 general-purpose working registers, a real-time counter, four flexible timer/counter blocks with compare modes and PWM, two USARTs, and a byte-oriented two-wire serial interface. The integrated CAN controller supports automotive and industrial communication designs where robust message-based networking is required.

The 16 MHz operating frequency gives the AVR core a practical balance between processing throughput, power consumption, and peripheral timing. AT90CAN64 devices execute AVR instructions with an architecture designed for efficient embedded control, while the dedicated timer and serial resources allow multiple communication and timing tasks to be handled without relying entirely on software polling. The CAN peripheral is particularly useful when several embedded nodes must exchange prioritized, framed messages over a shared network.

Typical applications include CAN-based automotive modules, industrial monitoring equipment, building and access-control systems, instrumentation, robotics controllers, and CAN-connected sensor or actuator nodes. The 64-TQFP package provides enough I/O and peripheral access for systems requiring more connectivity than a small 8- or 16-pin AVR device can offer, while remaining suitable for automated board assembly and compact embedded products.

Design consideration: confirm transceiver requirements, bus termination, crystal or clock configuration, programming access, and exposed-pin assignments against the manufacturer datasheet before layout. CAN bus signal integrity also depends on the external transceiver, protection network, wiring, and termination rather than on the microcontroller alone. This page combines manufacturer feature information, distributor references, package details, practical application guidance, and carefully qualified drop-in alternatives.

ドロップイン代替品: AT90CAN64-16AUR — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。

このシリーズのバリエーション

同一シリーズでドロップイン互換のモデル: AT90CAN64-16AUR (同一形状・フットプリント) — 相違点: Package, Product Type, Supply Voltage.

Microchip Technology
Package: 64-QFN, 9 x 9 mm
Product Type: 8-bit RISC Flash Microcontroller
Supply Voltage: 4.5 V to 5.5 V
比較対象 AT90CAN64-16AUR →

AT90CAN64-16MUR

✅ ドロップイン
Microchip Technology
📦 64-TQFP (14 x 14 mm)
8-bit RISC Flash Microcontroller · AVR enhanced RISC · 8 bit · 16 MHz · 64 KB · 64K x 8 bits · 2 KB · 4 KB

価格はお問い合わせください

データシートを見る →

AT90CAN64-16AUR 最大定格&電気的特性

Product Type 8-bit AVR RISC microcontroller with CAN controller
最大クロック周波数 16 MHz
Flash Memory 64 KB (64K x 8)
Program Memory 64 KB
EEPROM Memory 2 KB
SRAM 4 KB
General-Purpose I/O Lines 53
General-Purpose Working Registers 32
CAN Controller 1 CAN controller
Timer/Counters 4 with compare modes and PWM
USART Interfaces 2
Two-Wire Serial Interface 1 byte-oriented interface
Real-Time Counter 1
Flash Feature In-System Programmable with Read-While-Write
電源電圧 3.3 V to 5 V
パッケージ 64-TQFP (14 x 14 mm)
実装タイプ Surface Mount
Packaging Tape and reel

AT90CAN64-16AUR 64-tqfp (14 x 14 mm) ピン配置ガイド

AT90CAN64-16AUR (64-tqfp (14 x 14 mm) パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。

AT90CAN64-16AUR の 64-tqfp (14 x 14 mm) パッケージピン配置図

詳細なピン配置データはありません: AT90CAN64-16AUR.

詳細は データシート をご参照ください。

主な用途

AT90CAN64-16AUR の用途: 6 件s: Automotive CAN Control Modules, Industrial Monitoring and Control, Robotics and Motion Control, Building and Access-Control Systems, CAN-Connected Instrumentation, Distributed Sensor and Actuator Networks.

🚗

Automotive CAN Control Modules

AT90CAN64-16AUR fits compact vehicle-control modules because it combines a 16 MHz AVR core with an integrated CAN controller, 53 general-purpose I/O lines, four timer/counter blocks, and two USARTs. It can manage switches, sensors, actuators, diagnostic inputs, and communication gateway tasks without requiring a separate CAN controller. The 64 KB Flash and 4 KB SRAM provide room for protocol handling and application logic, while the external transceiver supplies the physical bus interface. Automotive deployment still requires confirmation of the exact qualification and environmental ratings.

🏭

Industrial Monitoring and Control

The AT90CAN64-16AUR supports distributed industrial monitoring by handling sensor inputs, alarms, local actuator control, and CAN-node communication in one 64-TQFP device. Its four timer/counter blocks can support timing, pulse capture, compare, or PWM functions, while two USARTs and the byte-oriented two-wire interface provide additional channels for displays, data loggers, and configuration devices. At 16 MHz with 64 KB of Flash, the controller is appropriate for coordinated machines or production equipment where deterministic embedded logic and robust field-bus communication are both required.

🔧

Robotics and Motion Control

AT90CAN64-16AUR is suitable for robot controllers and distributed motion-control nodes because its four timer/counter blocks provide resources for timing, compare events, and PWM generation. The 53 I/O lines allow simultaneous connection of encoders, limit sensors, motor drivers, status indicators, and communication transceivers. A CAN network can coordinate multiple axes or subsystems while the AVR core executes control logic. Designers should allocate timer channels carefully, use suitable output drivers for motors, and include galvanic protection where the external CAN bus may be electrically noisy.

🧩

Building and Access-Control Systems

The AT90CAN64-16AUR can serve as a door controller, sensor aggregator, or building-network node because it combines CAN communications with extensive digital I/O. Inputs from access readers, presence sensors, and push buttons can be processed locally, while outputs can drive relays, indicator circuits, or lock mechanisms through suitable driver stages. Two USARTs support peripheral or service connections, and the two-wire interface simplifies configuration or sensor buses. A secure production design should add appropriate authentication, electrical isolation decisions, watchdog strategy, and safe-state output behavior.

🔧

CAN-Connected Instrumentation

AT90CAN64-16AUR fits laboratory and process instrumentation that must acquire local signals while reporting data over a CAN network. The 16 MHz core and 4 KB SRAM support protocol handling and short measurement-control tasks, while two USARTs can serve debug or external-instrument links. Four timer/counter resources assist with pulse-rate measurements, timing, or PWM generation, and 53 I/O lines support digital front-panel controls. The MCU still requires external analog front-end circuitry for non-digital sensors, along with calibration and isolation appropriate to the measurement environment.

🌐

Distributed Sensor and Actuator Networks

AT90CAN64-16AUR works well as a local node in a distributed sensor or actuator network because its CAN controller, 53 I/O lines, and serial peripherals provide multiple connection options. Each node can acquire digital sensor states, execute local thresholds, and publish status messages through a CAN transceiver, reducing the burden on a central controller. The 64 KB Flash supports more elaborate local protocols than the 32 KB AT90CAN32 member. Designers should account for bus termination, protection, grounding, startup synchronization, and deterministic message timing across the network.

What are the key specifications of AT90CAN64-16AUR that engineers should know?
The AT90CAN64-16AUR is a 16 MHz, 8-bit AVR RISC microcontroller with 64 KB of Flash, 2 KB of EEPROM, 4 KB of SRAM, and a CAN controller in a 64-TQFP package. According to the AT90CAN32/64/128 manufacturer datasheet, it also provides 53 general-purpose I/O lines, 32 working registers, four timer/counter blocks, two USARTs, and a byte-oriented two-wire serial interface. These resources make it suitable for CAN-connected industrial, automotive, instrumentation, and control systems.
What is the AT90CAN64-16AUR and what does the 64K suffix mean?
The AT90CAN64-16AUR is an AVR embedded microcontroller with a 16 MHz operating frequency and an integrated CAN controller. The 64K designation corresponds to 64 KB, or 64K x 8 bits, of Flash program memory in the distributor description and manufacturer family documentation. Its 64-TQFP package exposes the family's communication peripherals, timers, and extensive I/O, making it suitable for compact embedded controllers that need both local control and CAN network communication.
Where can I download the AT90CAN64-16AUR datasheet PDF?
The AT90CAN64-16AUR datasheet PDF is available from the listed documentation link, and the underlying manufacturer document is the AT90CAN32/64/128 family datasheet. According to that document, the family supports Read-While-Write Flash, CAN, two USARTs, a two-wire serial interface, four flexible timer/counter blocks, and a real-time counter. Use the pin-description table and electrical characteristics in the same document when assigning the 64-TQFP connections and designing the clock, power, and CAN interface.
Where can I find the AT90CAN64-16AUR pinout?
The AT90CAN64-16AUR pinout is documented in the manufacturer AT90CAN32/64/128 datasheet, with package-specific information for the 64-TQFP option. A separate engineering pinout reference also identifies the device as QFN-64 and TQFP-64 families, but board designers should use the Microchip datasheet as the controlling source for the exact AT90CAN64-16AUR terminal numbering. Pay particular attention to power, ground, reset, clock, programming, I/O, timer, USART, and CAN-related multiplexing functions.
AT90CAN64-16AUR vs AT90CAN64-16AU - which ordering option should be selected?
AT90CAN64-16AUR and AT90CAN64-16AU identify closely related AT90CAN64 16 MHz devices, with the visible ordering difference relating to the packaging presentation rather than a change in the core CAN microcontroller function. For automated volume production, the -AUR tape-and-reel format is normally preferred when compatible with the board assembly process. For prototype or manual assembly, the AU tray format may be more convenient. Confirm the exact temperature grade, package, and reel orientation in the ordering information before substitution.
What can replace AT90CAN64-16AUR on the same 64-TQFP PCB?
The closest documented same-family replacement is the Microchip AT90CAN64-16MUR, which appears in the AT90CAN64 series results and retains the 64 KB Flash and 16 MHz device class. However, the available records do not provide a complete, quantified pin-compatibility and electrical comparison for every ordering option. AT90CAN64-16AU is another close ordering option, but it differs primarily in packaging presentation. Firmware, temperature grade, clock range, and assembly format should therefore be checked before treating either candidate as a production drop-in replacement.
When should I choose AT90CAN64-16AUR over AT90CAN32-16AUR?
Choose AT90CAN64-16AUR when the design benefits from 64 KB of Flash, 2 KB of EEPROM, and 4 KB of SRAM, while AT90CAN32-16AUR is better matched to a smaller AT90CAN32 design with less memory. Both devices belong to the AVR family with CAN controller capability, so protocol behavior and peripheral selection can remain familiar. The target AT90CAN64-16AUR is specified as a 16 MHz, 64-TQFP, 64 KB Flash device, giving it more program-memory headroom than the 32 KB member of the family.
Is AT90CAN64-16AUR suitable for automotive CAN applications?
The AT90CAN64-16AUR is technically suited to CAN-connected automotive electronics because it integrates a CAN controller and runs from a 16 MHz AVR core, but automotive production also requires qualification for the exact environmental and reliability program. The available product information does not establish AEC-Q100 qualification for this ordering code, so that status remains unresolved. Automotive designs should verify qualification, temperature range, transient protection, transceiver choice, and the applicable vehicle validation requirements before release.
Where can I buy AT90CAN64-16AUR online?
Use the Request a Quote form on this page to request AT90CAN64-16AUR availability, current commercial terms, and lead time for the exact 64-TQFP tape-and-reel ordering code. The part is listed across multiple authorized and independent sourcing channels, but inventory and commercial conditions can change. Include your required quantity, target date, and shipment destination in the request so the quote reflects the intended production schedule and packaging requirement.
What is the price of AT90CAN64-16AUR?
Current AT90CAN64-16AUR pricing should be requested through the Request a Quote form on this page. The structured offer system uses exact quantity and package information, while a separate unit-price record preserves a prior market reference. That historical figure is not a current quotation and should not be used for budgeting or purchasing decisions. Submit the required quantity, reel orientation, and delivery schedule with the request to obtain an actionable commercial response.
What is the lead time and stock status for AT90CAN64-16AUR?
Request current AT90CAN64-16AUR stock and lead time using the Request a Quote form on this page. One distributor record shows 6,752 pieces in stock, but that quantity is a point-in-time observation rather than a guaranteed allocation and may change without notice. Provide your required order quantity, approved alternate date, and target packaging format with the request. The inquiry should also confirm whether any remaining quantity is being held for reeled production schedules.
What external hardware is required for an AT90CAN64-16AUR CAN interface?
The AT90CAN64-16AUR requires an external CAN transceiver to connect its digital controller interface to a physical CAN bus. A suitable 3.3 V or 5 V CAN transceiver, bus protection components, termination resistors, decoupling capacitors, and the configured clock circuitry complete the interface. The microcontroller itself handles CAN frames and message objects, while the transceiver converts between digital logic and the bus differential signals. Protection and termination should be designed according to the selected transceiver and network topology.
How do AT90CAN64-16AUR and ATMEGA64A-ANR differ?
The AT90CAN64-16AUR includes a CAN controller and is available in a 64-TQFP 14 x 14 mm package, whereas the ATMEGA64A-ANR is an ATmega-family device shown in comparison references without the same CAN-controller role. Although both use the AVR architecture and a 64 KB Flash class, their peripheral sets are not interchangeable for a CAN design. A firmware or footprint decision should therefore be based on the complete pin and peripheral maps rather than memory size alone.
Can ATMEGA64A-ANR replace AT90CAN64-16AUR in a CAN product?
The ATMEGA64A-ANR is not a verified drop-in replacement for the AT90CAN64-16AUR because the available records do not demonstrate identical CAN-controller functionality, pin multiplexing, and electrical behavior. The target requires a dedicated CAN controller and an external transceiver for bus operation. Although the AVR family and 64 KB Flash capacity create some functional similarity, reusing the PCB would require a complete pin-by-pin review, firmware redesign, and application-level validation rather than a simple component substitution.
What are the key applications for AT90CAN64-16AUR?
AT90CAN64-16AUR applications include automotive electronics, industrial monitoring, robotics, instrumentation, building controls, and distributed sensor or actuator nodes. The integrated CAN controller supports message-based communication between embedded systems, while four timer/counter blocks, two USARTs, and a two-wire serial interface provide local peripheral connectivity. With 53 general-purpose I/O lines, 64 KB of Flash, and 4 KB of SRAM, it is suited to gateways and controllers that need more connectivity than a small microcontroller provides.

エンジニアリング参考データ: AT90CAN64-16AUR — 比較、設計ガイダンス、コンプライアンス情報。

選定ガイド

Choose AT90CAN64-16AUR when a compact embedded system needs an AVR controller with an integrated CAN controller, 16 MHz operation, 64 KB of Flash, and extensive I/O. It is particularly appropriate for automotive electronics, industrial nodes, robotics controllers, building systems, and instrumentation that also benefit from four timer/counter blocks, two USARTs, and a two-wire interface. Select AT90CAN32-16AUR when 32 KB of Flash is sufficient and lower memory use is a priority. ATMEGA64A-ANR may fit a design without a CAN controller, but it is not a direct replacement for the CAN-specific target. Treat AT90CAN64-16MUR as the closest listed same-family candidate while confirming the exact ordering-code differences, temperature grade, and production configuration. For every alternative, verify the 64-TQFP footprint, exposed-pad requirements, peripheral multiplexing, clock setup, and firmware compatibility before PCB release.

代替品との比較

パラメータ この製品 AT90CAN64-16MUR
Brand Microchip Technology Microchip Technology
Package 64-TQFP (14 x 14 mm) 64-TQFP (14 x 14 mm)
Architecture 8-bit AVR RISC 8-bit AVR RISC
Maximum Clock Frequency 16 MHz 16 MHz
Flash Memory 64 KB (64K x 8) 64 KB
CAN Controller 1 CAN controller 1 CAN controller
General-Purpose I/O Lines 53 53

主な差別化要因

  • Integrated CAN controller with ample AVR resources (vs ATMEGA64A-ANR)
  • Larger memory configuration than the AT90CAN32 family member (vs AT90CAN32-16AUR)
  • Tape-and-reel ordering option (vs AT90CAN64-16AU)
  • Broad embedded peripheral set (vs AT90CAN32-16AUR)

設計ノート

Route the CAN controller interface from the AT90CAN64-16AUR to the external transceiver as a short, tightly matched differential-capable connection, even though the MCU pins themselves are digital. Keep the transceiver, protection components, and termination network close to the connector or bus interface. Separate noisy switching and relay-drive paths from sensitive clock and programming routes. Follow the pin-multiplexing table in the manufacturer datasheet because many peripheral functions share the same I/O pins.

Provide local decoupling at every supply pin using the capacitor values and placement directed by the manufacturer datasheet. The CAN transceiver is electrically outside the MCU but can influence the local rail through transient events, so place its protection and bypass components near the transceiver rather than relying on bulk capacitance near the controller. Validate startup behavior across 3.3 V and 5 V operating conditions and confirm that the selected external components preserve adequate rise time for the chosen clock configuration.

Do not substitute a non-CAN ATmega solely because it uses the same AVR family and has similar Flash memory. The AT90CAN64-16AUR allocation of CAN, timer, USART, and interrupt resources can differ from the ATMEGA64A family, requiring both pin reassignment and firmware changes. For a production replacement, verify the complete TQFP pin map, peripheral multiplexing, electrical limits, clock behavior, and firmware register definitions before releasing the board revision.

Treat the physical CAN network as a separate high-speed channel requiring twisted-pair routing, controlled impedance, correct termination at both ends, and protection appropriate to the installation environment. The MCU and transceiver should share a compatible ground reference, but isolation may be needed where the nodes can sit at different ground potentials. Decouple communication faults from the control logic by using bus-off recovery behavior, watchdog supervision, and defined fallback states for connected actuators.

コンプライアンス情報

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
鉛フリー
Unknown
ハロゲンフリー
Unknown
紛争鉱物
Unknown

The product records do not explicitly establish the requested compliance statuses for the exact AT90CAN64-16AUR ordering code. Confirm RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals declarations with the manufacturer for the released part before environmental or automotive qualification use.

関連検索

at90can64 datasheet atmel at90can64 AT90CAN64-16AUR datasheet pdf AT90CAN64-16AUR pinout AT90CAN64-16AUR specifications AT90CAN64-16AUR equivalent AT90CAN64-16AUR replacement AT90CAN64-16AUR vs AT90CAN64-16MUR AT90CAN64-16AUR price AT90CAN64-16AUR stock AT90CAN64 TQFP-64 footprint AT90CAN64 CAN controller application

関連部品&用語

Microchip Technology AT90CAN64-16AUR AT90CAN64-16MUR AT90CAN32-16AUR ATMEGA64A-ANR AT90CAN64 AVR AVR RISC architecture 8-bit microcontroller CAN controller Controller Area Network Embedded microcontroller In-System Programmable Flash Read-While-Write EEPROM SRAM USART Two-wire serial interface Timer/Counter PWM Real-Time Counter TQFP-64 QFN family Surface mount Industrial automation Automotive electronics
クイック見積RFQ
詳細をすべてご記入ください — 営業チームが24時間以内にご返信いたします
部品番号 メーカー パッケージ QTY 目標価格 小計
✓
見積を送信しました!

24時間以内にメールでご返信いたします

1
RFQ送信済み
2
見積受領
3
注文済み
4
お支払い
5
発送済み
6
配達済み
RFQの詳細を表示