ATF22V10C-15SC - 15ns 500-Gate EEPROM PLD | Microchip
部品番号: ATF22V10C-15SC ✓ 生産中ATF22V10C-15SC 概要
A programmable logic device is a semiconductor in which the user implements digital functions by programming an internal logic array. The ATF22V10C family belongs to the SPLD hierarchy, combining a regular macrocell structure with nonvolatile Flash programming. Compared with a mask-programmed ASIC, it supports design changes without fabricating a new photomask; compared with a microcontroller, it provides deterministic combinational and registered logic without executing firmware.
Key characteristics include 10 macrocells, a nominal 15 ns speed grade, 5 V operation, and low standby power dissipation down to 10 uA typical. The device family is specified over 5 V ± 10% for military and industrial temperature ranges and over 5 V ± 5% for other indicated operating grades. Its nonvolatile Flash configuration retains the implemented logic when power is removed, while the latch feature can hold inputs at their previous logic states.
Typical uses include interface translation, control logic, address decoding, state-machine sequencing, industrial automation, and legacy equipment upgrades. The 24-SOIC outline also makes the ATF22V10C-15SC practical for conventional through-hole assembly rather than requiring a fine-pitch surface-mount redesign.
Designers should verify timing against the selected system clock, provide the required programming and power-sequencing controls, and confirm that the JEDEC fuse map matches the intended design. The Microchip ATF22V10C family is specified for speeds down to 5 ns across the broader family, but the -15 suffix identifies the 15 ns grade of this particular device.
This product page combines the manufacturer electrical characteristics with practical guidance for programming, pin assignment, timing analysis, and system integration. It also distinguishes documented replacement paths from package-compatible alternatives so engineers can assess PCB impact before committing to a substitution.
ドロップイン代替品: ATF22V10C-15SC — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: ATF22V10C-15SC (同一形状・フットプリント) — 相違点: Device Type, Package, Input Latch Feature, Latch Feature, Logic Capacity.
ATF22V10C-15JI
✅ ドロップイン価格はお問い合わせください
データシートを見る →ATF22V10C-15SI
✅ ドロップイン📋 参考代替品(カタログ未掲載)
ATF22V10C-15JC
✅ ドロップイン ⚠️ 仕様未検証価格はお問い合わせください
データシートを見る →ATF22V10C-15SC 最大定格&電気的特性
| Device Type | EEPLD |
| Product Type | Simple Programmable Logic Device (SPLD) |
| Programmable Logic Architecture | 10 macrocells |
| Equivalent Logic Capacity | 500 gates |
| Device Speed | 15 ns |
| Nominal Supply Voltage | 5 V |
| Industrial and Military Supply Range | 4.5 V to 5.5 V |
| Other Indicated Supply Range | 4.75 V to 5.25 V |
| Memory Technology | Electrically erasable Flash memory |
| Minimum Standby Power Dissipation | 10 uA typical |
| パッケージ | 24-SOIC |
| Package Width | 7.50 mm |
| Lead Pitch | 1.27 mm |
| Input Latch Feature | Holds inputs at previous logic states |
ATF22V10C-15SC 7.50 mm ピン配置ガイド
ATF22V10C-15SC (7.50 mm パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: ATF22V10C-15SC.
詳細は データシート をご参照ください。
主な用途
ATF22V10C-15SC の用途: 6 件s: Industrial Control and State Sequencing, Legacy Interface Translation, Address Decoding and Glue Logic, Battery-Powered Portable Equipment, Instrumentation Signal Conditioning, Security and Access Control Logic.
Industrial Control and State Sequencing
The ATF22V10C-15SC suits deterministic industrial control logic that must retain its programmed function through power cycles. Its 10 macrocells can implement state transitions, interlocks, output decoding, and interface conditions without a microcontroller in simple subsystems. The 15 ns grade supports designs in which the SPLD participates directly in the logic path. Because the configuration is stored in electrically erasable Flash memory, field updates can be performed without a mask or custom replacement part.
おすすめ
Legacy Interface Translation
ATF22V10C-15SC can bridge dissimilar digital interfaces by converting signal polarities, translating enable and status signals, and resolving timing differences. The 24-SOIC package is convenient for repair and modernization boards that use conventional through-hole assembly. Engineers should derive the timing constraints from the external devices and verify that the 15 ns grade provides sufficient setup and propagation margin in the complete path.
おすすめ
Address Decoding and Glue Logic
The ATF22V10C-15SC is appropriate for address decoding, chip-select generation, command qualification, and miscellaneous glue logic around processors or memory. Ten macrocells provide a compact implementation for Boolean equations and registered control paths. Its nonvolatile Flash configuration ensures that decoding remains stable after power removal, while the 24-SOIC outline supports straightforward PCB assembly and maintenance in established industrial systems.
おすすめ
Battery-Powered Portable Equipment
ATF22V10C-15SC can implement low-power wake-up, mode control, and signal routing in portable equipment where a compact nonvolatile control block is useful. The ATF22V10C family specifies power dissipation as low as 10 uA typical, allowing a design to retain control logic without frequent reconfiguration. The 24-SOIC package is larger than modern leadless packages, so board-area optimization may require comparing other ATF22V10C outlines.
おすすめ
Instrumentation Signal Conditioning
ATF22V10C-15SC can implement digital compensation, range selection, trigger qualification, and status decoding in test and measurement equipment. The device combines deterministic 15 ns logic with nonvolatile configuration, which is useful when control settings must survive power cycling. Its role is primarily digital conditioning around analog or mixed-signal circuits; analog accuracy, noise, and calibration remain functions of the surrounding signal chain.
おすすめ
Security and Access Control Logic
ATF22V10C-15SC can implement fixed credential logic, keypad scanning, alarm qualification, and access-control sequencing in compact systems. Flash configuration permits programmed logic to be updated without removing the device, while deterministic macrocell behavior supports repeatable timing analysis. For safety-critical installations, engineers must verify the device grade, environmental limits, fail-safe behavior, and any applicable sector-specific certification requirements independently.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: ATF22V10C-15SC — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 |
|---|---|
| Package | 24-SOIC |
| Brand | Microchip Technology |
| Device Type | EEPLD |
| Macrocells | 10 |
| Logic Capacity | 500 gates |
| Speed Grade | 15 ns |
| Nominal Supply Voltage | 5 V |
| Configuration Technology | Electrically erasable Flash memory |
| Lowest Stated Power Dissipation | 10 uA typical |
主な差別化要因
- Electrically erasable Flash configuration (vs GAL22V10)
- Deterministic 15 ns logic grade (vs ATF22V10CQ-15PC)
- Low-power family architecture (vs ATF22V10C-15SC)
設計ノート
Do not substitute a different package merely because the ATF22V10C family shares the same device name. The ATF22V10C-15SC uses a 24-SOIC outline, while ATF22V10CQ-15PC uses 24-TSSOP. Confirm pin numbering, body width, lead pitch, assembly footprint, and programming signals before considering a family migration. For GAL22V10 migrations, also verify JEDEC fuse-map compatibility and compare the AC and DC characteristics.
Treat clock, programming, and configuration inputs as timing-sensitive nets. Use the manufacturer timing definitions to establish setup, hold, and propagation requirements for every connected device. Avoid long branches, unprotected stubs, and unnecessary switching-node proximity. When a 15 ns device operates at the upper end of its timing capability, include real board propagation delay and external-device uncertainty in the timing analysis.
Place the required supply bypass capacitor close to the power and ground pins and provide a low-impedance connection between the capacitor and device. Keep the loop area small to limit transient current and radiated noise. Select capacitor voltage rating and tolerance for a nominal 5 V rail, and evaluate operation across the 4.5 V to 5.5 V industrial or military supply range when those limits apply to the selected grade.
Validate the programmed fuse map against the final schematic before production. A correct package and nominal part number do not guarantee that a different configuration file will produce equivalent logic. Run functional simulation, boundary-condition tests, and power-cycle tests that verify the Flash configuration remains intact. For legacy GAL22V10 designs, explicitly test every product term and registered output affected by possible fuse-map or timing differences.
コンプライアンス情報
The ATF22V10C-15SC is a programmable logic IC rather than an automotive-qualified component. Compliance declarations were not identified in the product information, so the relevant statuses remain unknown.